Re: [Discuss-gnuradio] Problems with IEEE802-11 Blocks?

Dear all, Sorry for the delayed response. As per Bastian's suggestion, I've managed to use the higher level block with the WiFi PHY Hier block included to successfully send data through the set-up. If anybody runs into the issue of using the WiFi PHY Hier block in the future, please look to the

Re: [Discuss-gnuradio] Problems with IEEE802-11 Blocks?

Hi, > On 11. Jul 2017, at 02:04, Taylor Eisman wrote: > > Well, I've been trying to place Packet Pad 2 around the WiFi Phy Hier example > setup to get good results and still have not achieved any decent results. > Three things are possible, given specific placements

Re: [Discuss-gnuradio] Problems with IEEE802-11 Blocks?

Hi, please keep the conversation on the list. On 7/9/2017 5:36 PM, Taylor Eisman wrote: Hey, I went ahead and substituted Wifi Hier Phy into my program, and it made no difference; however, I did end up using Packet Pad, and it was able to receive a full frame. Using Packet Pad did not

Re: [Discuss-gnuradio] Problems with IEEE802-11 Blocks?

Hi, I recommend to start with the example flow graph and make sure that it works works for you. If that works, just replace the constant message source with the data that you want to transmit. Did you maybe delete the packet pad block and just sent data back to back without any space in