On Sat, Feb 18, 2012 at 1:05 PM, Tom Rondeau wrote:
> On Fri, Feb 17, 2012 at 6:04 PM, Nowlan, Sean > wrote:
>
>> Don’t know how helpful these are, but here you go.
>>
>> ** **
>>
>> Sean
>>
>
> Sean,
> It looks like a couple of functions are failing from the stdout:
>
> volk_32fc_s32f_magn
On 02/18/2012 04:25 PM, Achilleas Anastasopoulos wrote:
> I installed swig 1.3.40 and i have the same problem!
>
> is there any other way i can check if the required PyhtonLibs
> are indeed available in my system?
> The fact that gnuradio trunk builds without a problem makes me g
I installed swig 1.3.40 and i have the same problem!
is there any other way i can check if the required PyhtonLibs
are indeed available in my system?
The fact that gnuradio trunk builds without a problem makes me go crazy...
thanks
Achilleas
On Sat, Feb 18, 2012 at 3:40 PM, Tom
On 02/16/2012 01:27 PM, Achilleas Anastasopoulos wrote:
> I also noticed the following in the cmake ../
>
> -- Found SWIG: /usr/bin/swig (found version "2.0.4")
> -- Could NOT find PythonLibs (missing: PYTHON_LIBRARIES)
> -- Found PythonInterp: /usr/bin/python2.7
>
>
> what is the significanc
Attached is a C implementation of a block I wish was in Gnu Radio.
Anyone done anything similar-enough as a block
in Gnu Radio that would make a decent starting point?
It's basically a block that takes a fixed-size vector input, and a list
of "descriptors" that describe output channels that
On Fri, Feb 17, 2012 at 6:04 PM, Nowlan, Sean
wrote:
> Don’t know how helpful these are, but here you go.
>
> ** **
>
> Sean
>
Sean,
It looks like a couple of functions are failing from the stdout:
volk_32fc_s32f_magnitude_16i_a: fail on arch orc
volk_32fc_x2_multiply_32fc_a: fail on arch o
On Thu, Feb 16, 2012 at 4:27 PM, Achilleas Anastasopoulos wrote:
> I also noticed the following in the cmake ../
>
> -- Found SWIG: /usr/bin/swig (found version "2.0.4")
> -- Could NOT find PythonLibs (missing: PYTHON_LIBRARIES)
> -- Found PythonInterp: /usr/bin/python2.7
>
>
> what is the signi
On Sat, Feb 18, 2012 at 10:56, Dan CaJacob wrote:
> A scheduled maintenance reboot may have caused the short outage Marcus saw.
We get an email on boot from the instance, so we know when these
happen (it didn't.)
My guess was it was a transient network connectivity issue for some
routes into th
Tom,
Am I correct in assuming you are running GR.org on AWS? I have noticed
in my own use of AWS that they have occasional scheduled reboots of
their hardware for upgrades, which naturally causes a reboot of your
instance. These scheduled events are listed in the AWS console page.
A schedu
Martin,
yes i did sudo ldconfig, but the problem is still there.
I noticed that cmake gives the following output for gr-howto-...-cmake
-- Found SWIG: /usr/bin/swig (found version "2.0.4")
-- Could NOT find PythonLibs (missing: PYTHON_LIBRARIES)
-- Found PythonInterp: /usr/bin/pytho
On 02/18/2012 01:01 PM, John Coppens wrote:
On Sat, 18 Feb 2012 12:09:46 -0500
Tom Rondeau wrote:
It's working for me. No reset required. Try again.
If redirecting is not enabled in the browser, it may not get to
gnuradio.org. It seems www.gnuradio.org goes there through redirection.
John
_
On Sat, 18 Feb 2012 12:09:46 -0500
Tom Rondeau wrote:
> It's working for me. No reset required. Try again.
If redirecting is not enabled in the browser, it may not get to
gnuradio.org. It seems www.gnuradio.org goes there through redirection.
John
__
Alright. If I get it working I will post my fixes. Which part is not
working?
Also, my research only deals with extracting the bit delay to the data sync
frame. So, I will not really be doing much with atsc decoding past getting
a bit stream what would include the sync frame. Which also bring
On Sat, Feb 18, 2012 at 11:59 AM, Marcus D. Leech wrote:
> www.gnuradio.org appears to be dead, as is the GIT server. Sigh.
>
> --
> Marcus Leech
> Principal Investigator
> Shirleys Bay Radio Astronomy Consortium
> http://www.sbrac.org
It's working for me. No reset required. Try again.
Tom
__
www.gnuradio.org appears to be dead, as is the GIT server. Sigh.
--
Marcus Leech
Principal Investigator
Shirleys Bay Radio Astronomy Consortium
http://www.sbrac.org
___
Discuss-gnuradio mailing list
Discuss-gnuradio@gnu.org
https://lists.gnu.org/mai
On Sat, Feb 18, 2012 at 2:29 AM, Burak TUYSUZ wrote:
>
> Hi all,
>
> I saw that there was a feature request 2 years ago.
> http://gnuradio.org/redmine/issues/399
> Is there any progress on that or any idea how to do that?
> Thank you
> -Burak
>
>
Burak,
There hasn't been much work (or interest th
Anyone on-list have any experience with the new AMD FX-series CPUs and
Gnu Radio? In particular I'm considering
replacing a Phenom II X6 1090T with a FX8150 (and new mobo, as it
turns out).
--
Principal Investigator
Shirleys Bay Radio Astronomy Consortium
http://www.sbrac.org
__
Hi,
I was wondering if the issue is still in the lastest builds, I do not have
to mathamatical knowledge to create this myself :(
___
Discuss-gnuradio mailing list
Discuss-gnuradio@gnu.org
https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
18 matches
Mail list logo
