uninstall libgruel3.5.3.2 installed by me.
Thanks in advance.
Regards,
activecat
___
Discuss-gnuradio mailing list
Discuss-gnuradio@gnu.org
https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
Dear Sir,
Both gr-baz and grextras fail in compilation of gnuradio 3.7.
It seems that we have no other choice but to ignore the compilation errors.
But what are gr-baz and grextras being used for, and how this compilation
error will affect the functionality of gnuradio 3.7 ?
Regards,
activecat
of 'http://gnuradio.org/svn/gnuradio/trunk': could not
connect to server (http://gnuradio.org)
What was wrong? Has cgran been migrated to another location ..?
Regards,
activecat
___
Discuss-gnuradio mailing list
Discuss-gnuradio@gnu.org
https
/download/ftw_80211_ofdm_tx/trunk'
make: *** [all] Error 2
Please advise, how to make FTW installed on gnuradio v3.6.5.1 ..?
Thanks in advance.
Regards,
activecat
Email: active...@gmail.com
___
Discuss-gnuradio mailing list
Discuss-gnuradio@gnu.org
https
It timeouts even after few attempts.
See below.
$ git clone --progress http://gnuradio.org/git/gnuradio.git
Cloning into 'gnuradio'...
error: Unable to get pack file
http://gnuradio.org/git/gnuradio.git/objects/pack/pack-d0093c65108e2594a080f6e3983dbe9402e10527.pack
transfer closed with
Dear Sir,
While compiling gr-ieee802-11 from https://github.com/bastibl/gr-ieee802-11,
these errors were encountered:
host@~/gr-ieee802-11/build $ make
Scanning dependencies of target ieee802_11_generated_includes
[ 3%] Generating moving_average_ff.h, moving_average_cc.h
[ 3%] Built target
,
activecat
Email: active...@gmail.com
___
Discuss-gnuradio mailing list
Discuss-gnuradio@gnu.org
https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
/classusrp__standard__rx.html#aa98b7831a644635f19ee84a7ecd404b2
Thanks.
Regards,
activecat
Email: active...@gmail.com
___
Discuss-gnuradio mailing list
Discuss-gnuradio@gnu.org
https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
Yes, I mean, what is teh equivalent command in UHD API ..?
How to control the MUX in the UHD API ?
set_mux()
On Tue, Dec 17, 2013 at 12:01 PM, Marcus D. Leech mle...@ripnet.com wrote:
On 12/16/2013 10:52 PM, Activecat wrote:
Dear Sir,
bool set_mux( int mux );
This command
On Tue, Dec 17, 2013 at 12:01 PM, Marcus D. Leech mle...@ripnet.com wrote:
On 12/16/2013 10:52 PM, Activecat wrote:
Dear Sir,
bool set_mux( int mux );
This command is supported by GNU Radio 3.4.2 C++ API
but not GNU Radio 3.7.
In this case, how to control the MUX using GNU Radio
You may try your luck here:
1. https://www.cgran.org/wiki/BBN80211
but it runs on gnuradio version 3.1.1
2. MAC code by Uwicore lab http://www.uwicore.umh.es/
is unfortunately for gnuradio version 3.3
3. https://github.com/bastibl/gr-ieee802-11
runs on gnuradio 3.7
Let me know if
Dear Sir,
I run this command with SBX daughterboard on N210:
/usr/local/lib/uhd/examples/tx_waveforms --freq 500e6 --wave-type SINE
--wave-freq 5e3 --rate 10e6
What is performed at the SBX, does it multiply (Frequency Modulation) the
5kHz SINE wave with the 500MHz carrier frequency ..?
info:
sgku@mmu2: ~ $ echo $PYTHONPATH
/usr/local/lib/python2.7/dist-packages
sgku@mmu2: ~ $ uname -a
Linux mmu2 3.2.0-4-686-pae #1 SMP Debian 3.2.63-2+deb7u1 i686 GNU/Linux
sgku@mmu2: ~ $ cat /etc/debian_version
7.7
sgku@mmu2: ~ $ gnuradio-config-info -v
3.7.5.1
Regards,
Activecat
fp.close()
ImportError: dynamic module does not define init function
(init_ieee802_11_swig)
On Thu, Jan 29, 2015 at 4:02 PM, Bastian Bloessl bloe...@ccs-labs.org
wrote:
Hi,
On 29 Jan 2015, at 08:37, Activecat active...@gmail.com wrote:
error messages:
Param
. The first problem should have been fixed with the most recent commit
(3 days ago).
On 29 Jan 2015, at 09:15, Activecat active...@gmail.com wrote:
Dear Sir,
Thank you very much for your prompt response.
I really appreciate your help.
Refer below result:
sgku@mmu2: ~ $ ipython
Dear Sirs,
Thanks for the answers. Let me further elaborate.
I could get what I want using Matlab, via below steps:
1). Using GRC flowgraph, connect the USRP Source to a File Sink.
2). Copy the file (says, test02.dat) to a PC running Matlab.
3). Using Matlab, run these commands:
a). c
Dear Sir,
I am using USRP to receive signal, and then plot the signal using WX GUI
FFT Sink.
I hope to get the vertical axis as Power Spectral Density in dBm/Hz.
Is there any way to do that?
Regards.
___
Discuss-gnuradio mailing list
/dvbt2_paprtr_cc_impl.cc.o]
Error 1
make[1]: *** [gr-dtv/lib/CMakeFiles/gnuradio-dtv.dir/all] Error 2
make: *** [all] Error 2
Build failed. See output above for error messages.
The complete log is at
https://github.com/activecat/gnuradio/blob/master/installation_log_003.txt
Please advise, thanks.
On Thu
_digital_swig.so
[ 91%] Built target _digital_swig
make: *** [all] Error 2
Build failed. See output above for error messages.
The complete installation log is at
https://github.com/activecat/gnuradio/blob/master/installation_log_001.txt
I am using Debian 7.8 64bit.
Further details of system info is at
https
://www.w6rz.net/dvbt2_paprtr_cc_impl.cc
w6rz.net is my personal website.
Ron
On 04/01/2015 07:11 PM, Activecat wrote:
Dear Sir,
I have comment out the #include complex.h, but still has error, as
below:
[ 80%] Building CXX object
gr-dtv/lib/CMakeFiles/gnuradio-dtv.dir/dvbt2
in
a debugger. (I guess it actually seg faults but you don't see it in GRC).
You can use something like
gdb python
run wifi_loopback.py
and then do a backtrace (bt).
See also
https://gnuradio.org/redmine/projects/gnuradio/wiki/TutorialsDebugging
Best,
Bastian
On 04/23/2015 01:33 PM, Activecat
]=0x6f99a4bee43009171bce9fa5457099aafaf2f753, stripped
Thank you very much.
On Thu, Jan 29, 2015 at 4:30 PM, Activecat active...@gmail.com wrote:
Dear Bastian,
Yes, this solves all the problems.
I just get the current commit and recompile, everything works !
Thank you very much.
On Thu, Jan 29, 2015 at 4:20 PM, Bastian Bloessl
Dear Sir,
I've just install gnuradio using pybombs, and manually install the missing
python-opengl using apt-get.
Unfortunately below error occurs when I execute a flowgraph.
Executing:
/home/sgku/Dropbox/gnuradio/gr-activecat/examples/jitter/top_block.py
Using Volk machine: avx_64_mmx
Dear Sir,
Referring to [1], the correct daughtercard for HF Communications is LFRX
and LFTX.
As a Ham radio receiver, could BasicRX be used instead of LFRX?
Regards,
Activecat.
[1].
http://www.ettus.com/content/files/kb/Selecting_an_RF_Daughterboard.pdf
201 - 224 of 224 matches
Mail list logo
