I am trying add a phase-shift to my signal via the use of a multiply block, but
I have not been able to find the correct inputs for the block. What syntax
should I use to input an exponential or a complex cosine/sine combination for
the multiplication?
Best,
Fernando
To: discuss-gnuradio@gnu.org
Subject: Re: [Discuss-gnuradio] Measure and record the phase at the receiver
Hi Fernando!
On 03/22/2017 06:51 PM, Trejo Treviño, Fernando Alberto wrote:
Hi Marcus!
I am implementing a transmitter and a receiver model using two USRP N210s. Both
are using GFS
at you want to do, in the bigger
picture?
Best regards,
Marcus
On 03/22/2017 05:58 PM, Trejo Treviño, Fernando Alberto wrote:
I am currently experimenting with a USRP N210, and I would like to measure and
record the phase of a received signal. I have read into the pre-installed PLL
blocks, b
I am currently experimenting with a USRP N210, and I would like to measure and
record the phase of a received signal. I have read into the pre-installed PLL
blocks, but these do not provide the same functionality. Ideally this would be
done before the first iteration of the PLL, but I am also