Hi ,
Can anyone kindly tell that how i can vary the bandwidth of my
transmitted signal in GRC??I am using B210 which has a instantaneous
bandwidth of 56MHz..
___
Discuss-gnuradio mailing list
Discuss-gnuradio@gnu.org
Thnx Marcus..u mean that if i change the sample rate of USRP sink
block in the properties dialog box then the bandwidth will be equal to
the changed sample rate??
___
Discuss-gnuradio mailing list
Discuss-gnuradio@gnu.org
not understanding fully..
On Sun, Aug 17, 2014 at 10:45 PM, Ali user0...@gmail.com wrote:
Thanx Marcus and Tom fr ur explanations. I will read further and ask any
questions if i have.
Tom Rondeau t...@trondeau.com wrote:
On Sun, Aug 17, 2014 at 11:04 AM, jason sam user0...@gmail.com wrote:
Hi,
I have
part.
Greetings,
Marcus
[1] http://i.imgur.com/kfXiRsX.png
On 17.07.2014 07:49, jason sam wrote:
Hi all,
When a complex signal is given to QT time sink block it displays the
signal in blue color.There is a red line also at zero level.is this
the DC component??And it doesn't display
{}
and Im{}. You're just running an older version where the data is simply
labeled Data 0 (the real part) and Data 1 (the imaginary part).
Tom
On 17.07.2014 10:19, jason sam wrote:
Hi Marcus,
The legend only says 'Data 0'and 'Data 1'.However, it can be
changed.Why is the imaginary part
Hi all,
When a complex signal is given to QT time sink block it displays the
signal in blue color.There is a red line also at zero level.is this
the DC component??And it doesn't display the imaginary part as in WX
Scope sink block?
Regards,
Ali
___
...@ettus.com wrote:
On 07/09/2014 06:30 AM, jason sam wrote:
Hi all,
In WX GUI time sink when we roll the mouse over the plot we can change
the range of y-axis and x-axis but in QT GUI time sink it is not
changing in this way.We can set the range for y-axis in block
parameters but how can I change
Thanx got it!
On Thu, Jul 10, 2014 at 6:22 PM, Tom Rondeau t...@trondeau.com wrote:
On Wed, Jul 9, 2014 at 12:30 AM, jason sam user0...@gmail.com wrote:
Hi all,
In WX GUI time sink when we roll the mouse over the plot we can change
the range of y-axis and x-axis but in QT GUI time sink
Hi all,
In WX GUI time sink when we roll the mouse over the plot we can change
the range of y-axis and x-axis but in QT GUI time sink it is not
changing in this way.We can set the range for y-axis in block
parameters but how can I change the x-axis min and max values for QT
GUI time sink block
and baud_rate
in the formulas?
On Fri, Jul 4, 2014 at 9:14 PM, Marcus Müller marcus.muel...@ettus.com wrote:
Not at all, because for these blocks, symbols have no meaning.
On 04.07.2014 17:38, jason sam wrote:
Yes Marcus,u are r right and i am also asking about such blocks like
the FM Mod block
,
Marcus Müller
[1]http://gnuradio.org/doc/doxygen/classgr_1_1analog_1_1frequency__modulator__fc.html#a9c252eeb8c9daf6ccd50427d3bc55bd3
On 05.07.2014 09:59, jason sam wrote:
Sorry for prolonging the discussion but I am a bit confused here.The
sensitivity parameter for Freq Mod block is defined
Thanx Martin,but where in GRC we can set samples per symbol??I am new
to this so i don't know yet...
Ali
On Tue, Jul 1, 2014 at 2:18 PM, Martin Braun martin.br...@ettus.com wrote:
On 06/26/2014 11:06 AM, jason sam wrote:
I am bit confused b/w the two terms.I have read some material and i
got
rate, samples per symbol etc are
concepts that are meaningful only for certain blocks, and thus there is
no sense in setting those globally.
Greetings,
Marcus
On 04.07.2014 08:33, jason sam wrote:
Thanx Martin,but where in GRC we can set samples per symbol??I am new
to this so i don't know
Hi,
I have written a python code(wxgui.py) for a simple GUI using
wxPython.There is a button in it and by pressing that button i am
executing another python file.It's working fine and i am able to call
any python file,but when i try to execute the python file created by
GRC(uhd_fft.py) i get the
If i run it in terminal even then its not running.
On Thu, Jun 5, 2014 at 12:52 PM, Martin Braun martin.br...@ettus.com
wrote:
On 05.06.2014 06:28, jason sam wrote:
Hi All,
When i try to run any of built in examples (in .py form) with GRC,i get
the following error:
Are you trying
Hi All,
I am doing simple wide band FM..The flowgraph is as attached..When i
execute it i am getting following error:
gr_remez: insufficient extremals -- cannot continue
Traceback (most recent call last):
File /home/ali/Desktop/top_block.py, line 109, in module
tb = top_block()
File
'.grc' file is not available,only '.py' is available.
On Thu, Jun 5, 2014 at 12:56 PM, jason sam user0...@gmail.com wrote:
If i run it in terminal even then its not running.
On Thu, Jun 5, 2014 at 12:52 PM, Martin Braun martin.br...@ettus.com
wrote:
On 05.06.2014 06:28, jason sam wrote
What will happen if i exceed this limit?Actually with this amplitude the TX
power is very less...Is there any other solution?
On Thu, Jun 5, 2014 at 12:54 PM, Martin Braun martin.br...@ettus.com
wrote:
On 05.06.2014 05:17, jason sam wrote:
Hi Tom,
Can you tell what is the constraint
,
to enable doxygen, pass -DENABLE_DOXYGEN=On to the cmake call
Greetings,
Marcus
On 05.06.2014 05:14, jason sam wrote:
How can i configure GNU Radio Companion 3.7.3 with Doxygen so taht i can
view the blocks' documentation from inside GRC?I have Doxygen installed but
its not configured with GRC
like your audio device being
inaccessible and is really more of a configuration problem on your side :)
Greetings,
Marcus
On 05.06.2014 09:59, jason sam wrote:
'.grc' file is not available,only '.py' is available.
On Thu, Jun 5, 2014 at 12:56 PM, jason sam user0...@gmail.com wrote
has sane
parameters.
Greetings,
Marcus
On 05.06.2014 09:58, jason sam wrote:
Hi All,
I am doing simple wide band FM..The flowgraph is as attached..When i
execute it i am getting following error:
gr_remez: insufficient extremals -- cannot continue
Traceback (most recent call last):
File
ok
On Thu, Jun 5, 2014 at 2:03 PM, Marcus Müller marcus.muel...@ettus.com
wrote:
You're not using Cmake properly. Please refer to the source build guide
in the wiki.
Greetings,
Marcus
On 05.06.2014 10:26, jason sam wrote:
I tried to do it but got the following error:
CMake Error
Hi,
In GRC is it necessary that we give a signal to any sink having an
amplitude greater than 1?
Regards,
Ali
___
Discuss-gnuradio mailing list
Discuss-gnuradio@gnu.org
https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
or exceeding 1.00 (even just on the peak)
can cause problems. Also a physical transmitter might have only 12 or 16
bits fixed point dynamic range, so there may be a minimum signal amplitude
as well.
-- Tom, N5EG
On Wed, Jun 4, 2014 at 7:33 PM, jason sam user0...@gmail.com wrote:
Hi,
In GRC
How can i configure GNU Radio Companion 3.7.3 with Doxygen so taht i can
view the blocks' documentation from inside GRC?I have Doxygen installed but
its not configured with GRC.
Regards,
Ali
___
Discuss-gnuradio mailing list
Discuss-gnuradio@gnu.org
Hi All,
When i try to run any of built in examples (in .py form) with GRC,i get the
following error:
Error:
/usr/local/share/gnuradio/examples/audio/audio_fft.py:1:1:FATAL:PARSER:ERR_DOCUMENT_EMPTY:
Start tag expected, '' not found
An example of such file is as attached.
#!/usr/bin/python
Hi,
If i make a GUI in python language and i want to call a GRC file from that
GUI by pressing a button or something,then it's possible to call a file
like that??
Regards,
Ali
___
Discuss-gnuradio mailing list
Discuss-gnuradio@gnu.org
in your main Python program.
Greetings,
Marcus
On 27.05.2014 11:37, jason sam wrote:
Hi,
If i make a GUI in python language and i want to call a GRC file from that
GUI by pressing a button or something,then it's possible to call a file
like that??
Regards,
Ali
The code is as attached.
On Mon, May 26, 2014 at 9:42 AM, jason sam user0...@gmail.com wrote:
When i execute a GRC file i get the following error.Any info about that?
Regards,
Ali
noise
Description: Binary data
___
Discuss-gnuradio mailing list
a momentary phase increase that is
proportional to sensitivity and input amplitude
[2] d_phase = d_phase + d_sensitivity * in[i];
On 26.05.2014 06:25, jason sam wrote:
Hi Marcus,
I have seen the doxygen documentation but it's all code there,no
description.Can u kindly guide me where
device args parameter is not in the UHD USRP source/sink block?There is
only 'Device addr'
On Fri, May 23, 2014 at 9:39 PM, Marcus D. Leech mle...@ripnet.com wrote:
On 05/23/2014 12:23 PM, raf raf wrote:
Hello All Gnu Radio user,
To use a 2 TX, I want to change a clock rate to an
files at other frequencies.
http://www.w6rz.net/sine.c
Ron
On 5/22/2014 9:26 PM, jason sam wrote:
Hi,
I have made the flowgraph as attached..It is showing the modulation in
scope but in fft block it's continuously changing so I am still unable to
find out that what are the max and min
In the device parameter write 'set_master_clock_rate=30e6'
On Fri, May 23, 2014 at 9:08 PM, raf raf raf...@hotmail.fr wrote:
Hello All Gnu Radio user,
To use a 2 TX, I want to change a clock rate to an accepted one, under
30.72 MHz. I use the API with uhd_usrp_probe and it works only for
Correction not 50 Hz but whatever the rate is after interpolation
On Sat, May 24, 2014 at 12:23 PM, jason sam user0...@gmail.com wrote:
Another question related to my flowgraph that when i use the' Frequency
Mod' block...then it will take the center frequency as 50Hz(the freq of the
signal
I am using GNU Radio Companion 3.7.3...when i set the frequency of my
signal source to low values(in Hz or kHz),i get no signal on my scope or
fft sink??
___
Discuss-gnuradio mailing list
Discuss-gnuradio@gnu.org
Actually i think the problem is that i have very low sample rate according
to the 1024 FFT..
On Thu, May 15, 2014 at 7:38 PM, jason sam user0...@gmail.com wrote:
___
Discuss-gnuradio mailing list
Discuss-gnuradio@gnu.org
https://lists.gnu.org
I am confused about the terms full duplex and half duplex in context of
USRP...If i am using two antennas attached on the same channel on B210(one
on TX/RX and other on RX2).I am Rxing through one antenna and
retransmitting the signal with the other antenna..Am i operating on full
duplex or half
transmitting on
one connector (TX/RX) and receiving on the other (RX2).
Half duplex means you never TX and RX simultaneously.
Matt
On Wed, May 14, 2014 at 11:09 AM, jason sam user0...@gmail.com wrote:
I am confused about the terms full duplex and half duplex in context of
USRP...If i am
I am confused about the sample rate in GRC...if i am RXing a signal by USRP
B210 at 2.4 GHz then the sample rate should be 4.8GHz??But USRP B210 uses a
direct conversion RX and shifts the signal to 0Hz,so what should be the
criteria for setting the sample rate?
Another option could be ton set it
39 matches
Mail list logo