Re: [Discuss-gnuradio] USRP Source Block error 255
Hi all, I just experienced the same error. Since my setup differs (ancient OS), I thought I'd just share my experience so far. For low sample rates (3.125MSps) the flowgraph freezes after a while and an 'O' is printed. For 6.25MSps: gr::log :WARN: gr uhd usrp source0 - USRP Source Block caught rx error code: 255 For 12.5MSps: OOgr::log :WARN: gr uhd usrp source0 - USRP Source Block caught rx error code: 255 All those overruns only occur right before the flowgraph freezes. It's a very simple flowgraph "USRP source --> Qt Waterfall Sink". Cheers Johannes [INFO] [UHD] linux; GNU C++ version 4.8.4; Boost_105400; UHD_3.14.0.0-31-g98057752 OS: Ubuntu 14.04 4.4.0-124-generic #148~14.04.1-Ubuntu GR: 3.7.12.0 On 09.08.2018 19:52, Chad Spooner wrote: On 08/07/2018 02:01 PM, Marcus D. Leech wrote: On 08/07/2018 04:47 PM, Chad Spooner wrote: On 08/07/2018 12:01 PM, Marcus D. Leech wrote: On 08/07/2018 02:54 PM, Chad Spooner wrote: All: I'm having trouble with some flowgraphs under Ubuntu 18.04.1. I recently set up a HP ZBook G3 with that OS and did a PyBOMBS install of gnuradio and UHD. I'm connected to an Ettus X310 and the SBX daughter card here. I then starting running some of the flowgraphs I had been running under 16.04 on that same computer. I hadn't observed any errors with these flowgraphs under 16.04. After running for a while, I get the following error: gr::log :WARN: gr uhd usrp source0 - USRP Source Block caught rx error code: 255 The flowgraph doesn't appear to stop, but the graphics I'm running using QT GUI Vector Sink freeze up. I can then stop the flowgraph in the usual way by clicking the "kill the flowgraph" button. kernel: 4.15.0-29-generic #31-Ubuntu SMP gnuradio version: 3.7.12.0 UHD version: UHD_3.14.0.0-31-g98057752 Any ideas of how to fix this problem? Here is the output of uhd_usrp_probe: [INFO] [UHD] linux; GNU C++ version 7.3.0; Boost_106501; UHD_3.14.0.0-31-g98057752 [INFO] [X300] X300 initialization sequence... [INFO] [X300] Maximum frame size: 1472 bytes. [INFO] [X300] Radio 1x clock: 200 MHz [INFO] [0/DmaFIFO_0] Initializing block control (NOC ID: 0xF1F0D000) [INFO] [0/DmaFIFO_0] BIST passed (Throughput: 1300 MB/s) [INFO] [0/DmaFIFO_0] BIST passed (Throughput: 1303 MB/s) [INFO] [0/Radio_0] Initializing block control (NOC ID: 0x12AD1001) [INFO] [0/Radio_1] Initializing block control (NOC ID: 0x12AD1001) [INFO] [0/DDC_0] Initializing block control (NOC ID: 0xDDC0) [INFO] [0/DDC_1] Initializing block control (NOC ID: 0xDDC0) [INFO] [0/DUC_0] Initializing block control (NOC ID: 0xD0C0) [INFO] [0/DUC_1] Initializing block control (NOC ID: 0xD0C0) _ / | Device: X-Series Device | _ | / | | Mboard: X310 | | revision: 6 | | product: 30410 | | mac-addr0: 00:80:2f:19:13:0a | | mac-addr1: 00:80:2f:19:13:0b | | gateway: 192.168.10.1 | | ip-addr0: 192.168.10.2 | | subnet0: 255.255.255.0 | | ip-addr1: 192.168.20.2 | | subnet1: 255.255.255.0 | | ip-addr2: 192.168.30.2 | | subnet2: 255.255.255.0 | | ip-addr3: 192.168.40.2 | | subnet3: 255.255.255.0 | | serial: 306B4B8 | | FW Version: 6.0 | | FPGA Version: 35.1 | | FPGA git hash: a20b791 | | RFNoC capable: Yes | | | | Time sources: internal, external, gpsdo | | Clock sources: internal, external, gpsdo | | Sensors: ref_locked | | _ | | / | | | RX Dboard: A | | | ID: WBX-120, WBX-120 + Simple GDB (0x0081) | | | Serial: F5FB72 | | | _ | | | / | | | | RX Frontend: 0 | | | | Name: WBX-120 RX+GDB | | | | Antennas: TX/RX, RX2, CAL | | | | Sensors: lo_locked | | | | Freq range: 25.000 to 2200.000 MHz | | | | Gain range PGA0: 0.0 to 31.5 step 0.5 dB | | | | Bandwidth range: 12000.0 to 12000.0 step 0.0 Hz | | | | Connection Type: IQ | | | | Uses LO offset: No | | | _ | | | / | | | | RX Codec: A | | | | Name: ads62p48 | | | | Gain range digital: 0.0 to 6.0 step 0.5 dB | | _ | | / | | | RX Dboard: B | | | ID: SBX-120 (0x0083) | | | Serial: F5B3A8 | | | _ | | | / | | | | RX Frontend: 0 | | | | Name: SBX-120 RX | | | | Antennas: TX/RX, RX2, CAL | | | | Sensors: lo_locked | | | | Freq range: 400.000 to 4400.000 MHz | | | | Gain range PGA0: 0.0 to 31.5 step 0.5 dB | | |
Re: [Discuss-gnuradio] USRP Source Block error 255
On 08/07/2018 02:01 PM, Marcus D. Leech wrote: On 08/07/2018 04:47 PM, Chad Spooner wrote: On 08/07/2018 12:01 PM, Marcus D. Leech wrote: On 08/07/2018 02:54 PM, Chad Spooner wrote: All: I'm having trouble with some flowgraphs under Ubuntu 18.04.1. I recently set up a HP ZBook G3 with that OS and did a PyBOMBS install of gnuradio and UHD. I'm connected to an Ettus X310 and the SBX daughter card here. I then starting running some of the flowgraphs I had been running under 16.04 on that same computer. I hadn't observed any errors with these flowgraphs under 16.04. After running for a while, I get the following error: gr::log :WARN: gr uhd usrp source0 - USRP Source Block caught rx error code: 255 The flowgraph doesn't appear to stop, but the graphics I'm running using QT GUI Vector Sink freeze up. I can then stop the flowgraph in the usual way by clicking the "kill the flowgraph" button. kernel: 4.15.0-29-generic #31-Ubuntu SMP gnuradio version: 3.7.12.0 UHD version: UHD_3.14.0.0-31-g98057752 Any ideas of how to fix this problem? Here is the output of uhd_usrp_probe: [INFO] [UHD] linux; GNU C++ version 7.3.0; Boost_106501; UHD_3.14.0.0-31-g98057752 [INFO] [X300] X300 initialization sequence... [INFO] [X300] Maximum frame size: 1472 bytes. [INFO] [X300] Radio 1x clock: 200 MHz [INFO] [0/DmaFIFO_0] Initializing block control (NOC ID: 0xF1F0D000) [INFO] [0/DmaFIFO_0] BIST passed (Throughput: 1300 MB/s) [INFO] [0/DmaFIFO_0] BIST passed (Throughput: 1303 MB/s) [INFO] [0/Radio_0] Initializing block control (NOC ID: 0x12AD1001) [INFO] [0/Radio_1] Initializing block control (NOC ID: 0x12AD1001) [INFO] [0/DDC_0] Initializing block control (NOC ID: 0xDDC0) [INFO] [0/DDC_1] Initializing block control (NOC ID: 0xDDC0) [INFO] [0/DUC_0] Initializing block control (NOC ID: 0xD0C0) [INFO] [0/DUC_1] Initializing block control (NOC ID: 0xD0C0) _ / | Device: X-Series Device | _ | / | | Mboard: X310 | | revision: 6 | | product: 30410 | | mac-addr0: 00:80:2f:19:13:0a | | mac-addr1: 00:80:2f:19:13:0b | | gateway: 192.168.10.1 | | ip-addr0: 192.168.10.2 | | subnet0: 255.255.255.0 | | ip-addr1: 192.168.20.2 | | subnet1: 255.255.255.0 | | ip-addr2: 192.168.30.2 | | subnet2: 255.255.255.0 | | ip-addr3: 192.168.40.2 | | subnet3: 255.255.255.0 | | serial: 306B4B8 | | FW Version: 6.0 | | FPGA Version: 35.1 | | FPGA git hash: a20b791 | | RFNoC capable: Yes | | | | Time sources: internal, external, gpsdo | | Clock sources: internal, external, gpsdo | | Sensors: ref_locked | | _ | | / | | | RX Dboard: A | | | ID: WBX-120, WBX-120 + Simple GDB (0x0081) | | | Serial: F5FB72 | | | _ | | | / | | | | RX Frontend: 0 | | | | Name: WBX-120 RX+GDB | | | | Antennas: TX/RX, RX2, CAL | | | | Sensors: lo_locked | | | | Freq range: 25.000 to 2200.000 MHz | | | | Gain range PGA0: 0.0 to 31.5 step 0.5 dB | | | | Bandwidth range: 12000.0 to 12000.0 step 0.0 Hz | | | | Connection Type: IQ | | | | Uses LO offset: No | | | _ | | | / | | | | RX Codec: A | | | | Name: ads62p48 | | | | Gain range digital: 0.0 to 6.0 step 0.5 dB | | _ | | / | | | RX Dboard: B | | | ID: SBX-120 (0x0083) | | | Serial: F5B3A8 | | | _ | | | / | | | | RX Frontend: 0 | | | | Name: SBX-120 RX | | | | Antennas: TX/RX, RX2, CAL | | | | Sensors: lo_locked | | | | Freq range: 400.000 to 4400.000 MHz | | | | Gain range PGA0: 0.0 to 31.5 step 0.5 dB | | | | Bandwidth range: 12000.0 to 12000.0 step 0.0 Hz | | | | Connection Type: IQ | | | | Uses LO offset: No | | | _ | | | / | | | | RX Codec: B | | | | Name: ads62p48 | | | | Gain range digital: 0.0 to 6.0 step 0.5 dB | | _ | | / | | | TX Dboard: A | | | ID: WBX-120 (0x0080) | | | Serial: F5FB72 | | | ID: WBX + Simple GDB, WBX v3 + Simple GDB, WBX v4 + Simple GDB, WBX-120 + Simple GDB (0x004f) | | | Serial: F5E6B6 | | | _ | | | / | | | | TX Frontend: 0 | | | | Name: WBX-120 TX+GDB | | | | Antennas: TX/RX, CAL
Re: [Discuss-gnuradio] USRP Source Block error 255
On 08/07/2018 04:47 PM, Chad Spooner wrote: On 08/07/2018 12:01 PM, Marcus D. Leech wrote: On 08/07/2018 02:54 PM, Chad Spooner wrote: All: I'm having trouble with some flowgraphs under Ubuntu 18.04.1. I recently set up a HP ZBook G3 with that OS and did a PyBOMBS install of gnuradio and UHD. I'm connected to an Ettus X310 and the SBX daughter card here. I then starting running some of the flowgraphs I had been running under 16.04 on that same computer. I hadn't observed any errors with these flowgraphs under 16.04. After running for a while, I get the following error: gr::log :WARN: gr uhd usrp source0 - USRP Source Block caught rx error code: 255 The flowgraph doesn't appear to stop, but the graphics I'm running using QT GUI Vector Sink freeze up. I can then stop the flowgraph in the usual way by clicking the "kill the flowgraph" button. kernel: 4.15.0-29-generic #31-Ubuntu SMP gnuradio version: 3.7.12.0 UHD version: UHD_3.14.0.0-31-g98057752 Any ideas of how to fix this problem? Here is the output of uhd_usrp_probe: [INFO] [UHD] linux; GNU C++ version 7.3.0; Boost_106501; UHD_3.14.0.0-31-g98057752 [INFO] [X300] X300 initialization sequence... [INFO] [X300] Maximum frame size: 1472 bytes. [INFO] [X300] Radio 1x clock: 200 MHz [INFO] [0/DmaFIFO_0] Initializing block control (NOC ID: 0xF1F0D000) [INFO] [0/DmaFIFO_0] BIST passed (Throughput: 1300 MB/s) [INFO] [0/DmaFIFO_0] BIST passed (Throughput: 1303 MB/s) [INFO] [0/Radio_0] Initializing block control (NOC ID: 0x12AD1001) [INFO] [0/Radio_1] Initializing block control (NOC ID: 0x12AD1001) [INFO] [0/DDC_0] Initializing block control (NOC ID: 0xDDC0) [INFO] [0/DDC_1] Initializing block control (NOC ID: 0xDDC0) [INFO] [0/DUC_0] Initializing block control (NOC ID: 0xD0C0) [INFO] [0/DUC_1] Initializing block control (NOC ID: 0xD0C0) _ / | Device: X-Series Device | _ |/ | | Mboard: X310 | | revision: 6 | | product: 30410 | | mac-addr0: 00:80:2f:19:13:0a | | mac-addr1: 00:80:2f:19:13:0b | | gateway: 192.168.10.1 | | ip-addr0: 192.168.10.2 | | subnet0: 255.255.255.0 | | ip-addr1: 192.168.20.2 | | subnet1: 255.255.255.0 | | ip-addr2: 192.168.30.2 | | subnet2: 255.255.255.0 | | ip-addr3: 192.168.40.2 | | subnet3: 255.255.255.0 | | serial: 306B4B8 | | FW Version: 6.0 | | FPGA Version: 35.1 | | FPGA git hash: a20b791 | | RFNoC capable: Yes | | | | Time sources: internal, external, gpsdo | | Clock sources: internal, external, gpsdo | | Sensors: ref_locked | | _ | |/ | | | RX Dboard: A | | | ID: WBX-120, WBX-120 + Simple GDB (0x0081) | | | Serial: F5FB72 | | | _ | | |/ | | | | RX Frontend: 0 | | | | Name: WBX-120 RX+GDB | | | | Antennas: TX/RX, RX2, CAL | | | | Sensors: lo_locked | | | | Freq range: 25.000 to 2200.000 MHz | | | | Gain range PGA0: 0.0 to 31.5 step 0.5 dB | | | | Bandwidth range: 12000.0 to 12000.0 step 0.0 Hz | | | | Connection Type: IQ | | | | Uses LO offset: No | | | _ | | |/ | | | | RX Codec: A | | | | Name: ads62p48 | | | | Gain range digital: 0.0 to 6.0 step 0.5 dB | | _ | |/ | | | RX Dboard: B | | | ID: SBX-120 (0x0083) | | | Serial: F5B3A8 | | | _ | | |/ | | | | RX Frontend: 0 | | | | Name: SBX-120 RX | | | | Antennas: TX/RX, RX2, CAL | | | | Sensors: lo_locked | | | | Freq range: 400.000 to 4400.000 MHz | | | | Gain range PGA0: 0.0 to 31.5 step 0.5 dB | | | | Bandwidth range: 12000.0 to 12000.0 step 0.0 Hz | | | | Connection Type: IQ | | | | Uses LO offset: No | | | _ | | |/ | | | | RX Codec: B | | | | Name: ads62p48 | | | | Gain range digital: 0.0 to 6.0 step 0.5 dB | | _ | |/ | | | TX Dboard: A | | | ID: WBX-120 (0x0080) | | | Serial: F5FB72 | | | ID: WBX + Simple GDB, WBX v3 + Simple GDB, WBX v4 + Simple GDB, WBX-120 + Simple GDB (0x004f) | | | Serial: F5E6B6 | | | _ | | |/ | | | | TX Frontend: 0 | | | | Name: WBX-120 TX+GDB | | | | Antennas: TX/RX, CAL | | | | Sensors: lo_locked | | | | Fre
Re: [Discuss-gnuradio] USRP Source Block error 255
On 08/07/2018 12:01 PM, Marcus D. Leech wrote: On 08/07/2018 02:54 PM, Chad Spooner wrote: All: I'm having trouble with some flowgraphs under Ubuntu 18.04.1. I recently set up a HP ZBook G3 with that OS and did a PyBOMBS install of gnuradio and UHD. I'm connected to an Ettus X310 and the SBX daughter card here. I then starting running some of the flowgraphs I had been running under 16.04 on that same computer. I hadn't observed any errors with these flowgraphs under 16.04. After running for a while, I get the following error: gr::log :WARN: gr uhd usrp source0 - USRP Source Block caught rx error code: 255 The flowgraph doesn't appear to stop, but the graphics I'm running using QT GUI Vector Sink freeze up. I can then stop the flowgraph in the usual way by clicking the "kill the flowgraph" button. kernel: 4.15.0-29-generic #31-Ubuntu SMP gnuradio version: 3.7.12.0 UHD version: UHD_3.14.0.0-31-g98057752 Any ideas of how to fix this problem? Here is the output of uhd_usrp_probe: [INFO] [UHD] linux; GNU C++ version 7.3.0; Boost_106501; UHD_3.14.0.0-31-g98057752 [INFO] [X300] X300 initialization sequence... [INFO] [X300] Maximum frame size: 1472 bytes. [INFO] [X300] Radio 1x clock: 200 MHz [INFO] [0/DmaFIFO_0] Initializing block control (NOC ID: 0xF1F0D000) [INFO] [0/DmaFIFO_0] BIST passed (Throughput: 1300 MB/s) [INFO] [0/DmaFIFO_0] BIST passed (Throughput: 1303 MB/s) [INFO] [0/Radio_0] Initializing block control (NOC ID: 0x12AD1001) [INFO] [0/Radio_1] Initializing block control (NOC ID: 0x12AD1001) [INFO] [0/DDC_0] Initializing block control (NOC ID: 0xDDC0) [INFO] [0/DDC_1] Initializing block control (NOC ID: 0xDDC0) [INFO] [0/DUC_0] Initializing block control (NOC ID: 0xD0C0) [INFO] [0/DUC_1] Initializing block control (NOC ID: 0xD0C0) _ / | Device: X-Series Device | _ | / | | Mboard: X310 | | revision: 6 | | product: 30410 | | mac-addr0: 00:80:2f:19:13:0a | | mac-addr1: 00:80:2f:19:13:0b | | gateway: 192.168.10.1 | | ip-addr0: 192.168.10.2 | | subnet0: 255.255.255.0 | | ip-addr1: 192.168.20.2 | | subnet1: 255.255.255.0 | | ip-addr2: 192.168.30.2 | | subnet2: 255.255.255.0 | | ip-addr3: 192.168.40.2 | | subnet3: 255.255.255.0 | | serial: 306B4B8 | | FW Version: 6.0 | | FPGA Version: 35.1 | | FPGA git hash: a20b791 | | RFNoC capable: Yes | | | | Time sources: internal, external, gpsdo | | Clock sources: internal, external, gpsdo | | Sensors: ref_locked | | _ | | / | | | RX Dboard: A | | | ID: WBX-120, WBX-120 + Simple GDB (0x0081) | | | Serial: F5FB72 | | | _ | | | / | | | | RX Frontend: 0 | | | | Name: WBX-120 RX+GDB | | | | Antennas: TX/RX, RX2, CAL | | | | Sensors: lo_locked | | | | Freq range: 25.000 to 2200.000 MHz | | | | Gain range PGA0: 0.0 to 31.5 step 0.5 dB | | | | Bandwidth range: 12000.0 to 12000.0 step 0.0 Hz | | | | Connection Type: IQ | | | | Uses LO offset: No | | | _ | | | / | | | | RX Codec: A | | | | Name: ads62p48 | | | | Gain range digital: 0.0 to 6.0 step 0.5 dB | | _ | | / | | | RX Dboard: B | | | ID: SBX-120 (0x0083) | | | Serial: F5B3A8 | | | _ | | | / | | | | RX Frontend: 0 | | | | Name: SBX-120 RX | | | | Antennas: TX/RX, RX2, CAL | | | | Sensors: lo_locked | | | | Freq range: 400.000 to 4400.000 MHz | | | | Gain range PGA0: 0.0 to 31.5 step 0.5 dB | | | | Bandwidth range: 12000.0 to 12000.0 step 0.0 Hz | | | | Connection Type: IQ | | | | Uses LO offset: No | | | _ | | | / | | | | RX Codec: B | | | | Name: ads62p48 | | | | Gain range digital: 0.0 to 6.0 step 0.5 dB | | _ | | / | | | TX Dboard: A | | | ID: WBX-120 (0x0080) | | | Serial: F5FB72 | | | ID: WBX + Simple GDB, WBX v3 + Simple GDB, WBX v4 + Simple GDB, WBX-120 + Simple GDB (0x004f) | | | Serial: F5E6B6 | | | _ | | | / | | | | TX Frontend: 0 | | | | Name: WBX-120 TX+GDB | | | | Antennas: TX/RX, CAL | | | | Sensors: lo_locked | | | | Freq range: 25.000 to 2200.000 MHz | |
Re: [Discuss-gnuradio] USRP Source Block error 255
On 08/07/2018 02:54 PM, Chad Spooner wrote: All: I'm having trouble with some flowgraphs under Ubuntu 18.04.1. I recently set up a HP ZBook G3 with that OS and did a PyBOMBS install of gnuradio and UHD. I'm connected to an Ettus X310 and the SBX daughter card here. I then starting running some of the flowgraphs I had been running under 16.04 on that same computer. I hadn't observed any errors with these flowgraphs under 16.04. After running for a while, I get the following error: gr::log :WARN: gr uhd usrp source0 - USRP Source Block caught rx error code: 255 The flowgraph doesn't appear to stop, but the graphics I'm running using QT GUI Vector Sink freeze up. I can then stop the flowgraph in the usual way by clicking the "kill the flowgraph" button. kernel: 4.15.0-29-generic #31-Ubuntu SMP gnuradio version: 3.7.12.0 UHD version: UHD_3.14.0.0-31-g98057752 Any ideas of how to fix this problem? Here is the output of uhd_usrp_probe: [INFO] [UHD] linux; GNU C++ version 7.3.0; Boost_106501; UHD_3.14.0.0-31-g98057752 [INFO] [X300] X300 initialization sequence... [INFO] [X300] Maximum frame size: 1472 bytes. [INFO] [X300] Radio 1x clock: 200 MHz [INFO] [0/DmaFIFO_0] Initializing block control (NOC ID: 0xF1F0D000) [INFO] [0/DmaFIFO_0] BIST passed (Throughput: 1300 MB/s) [INFO] [0/DmaFIFO_0] BIST passed (Throughput: 1303 MB/s) [INFO] [0/Radio_0] Initializing block control (NOC ID: 0x12AD1001) [INFO] [0/Radio_1] Initializing block control (NOC ID: 0x12AD1001) [INFO] [0/DDC_0] Initializing block control (NOC ID: 0xDDC0) [INFO] [0/DDC_1] Initializing block control (NOC ID: 0xDDC0) [INFO] [0/DUC_0] Initializing block control (NOC ID: 0xD0C0) [INFO] [0/DUC_1] Initializing block control (NOC ID: 0xD0C0) _ / | Device: X-Series Device | _ |/ | | Mboard: X310 | | revision: 6 | | product: 30410 | | mac-addr0: 00:80:2f:19:13:0a | | mac-addr1: 00:80:2f:19:13:0b | | gateway: 192.168.10.1 | | ip-addr0: 192.168.10.2 | | subnet0: 255.255.255.0 | | ip-addr1: 192.168.20.2 | | subnet1: 255.255.255.0 | | ip-addr2: 192.168.30.2 | | subnet2: 255.255.255.0 | | ip-addr3: 192.168.40.2 | | subnet3: 255.255.255.0 | | serial: 306B4B8 | | FW Version: 6.0 | | FPGA Version: 35.1 | | FPGA git hash: a20b791 | | RFNoC capable: Yes | | | | Time sources: internal, external, gpsdo | | Clock sources: internal, external, gpsdo | | Sensors: ref_locked | | _ | |/ | | | RX Dboard: A | | | ID: WBX-120, WBX-120 + Simple GDB (0x0081) | | | Serial: F5FB72 | | | _ | | |/ | | | | RX Frontend: 0 | | | | Name: WBX-120 RX+GDB | | | | Antennas: TX/RX, RX2, CAL | | | | Sensors: lo_locked | | | | Freq range: 25.000 to 2200.000 MHz | | | | Gain range PGA0: 0.0 to 31.5 step 0.5 dB | | | | Bandwidth range: 12000.0 to 12000.0 step 0.0 Hz | | | | Connection Type: IQ | | | | Uses LO offset: No | | | _ | | |/ | | | | RX Codec: A | | | | Name: ads62p48 | | | | Gain range digital: 0.0 to 6.0 step 0.5 dB | | _ | |/ | | | RX Dboard: B | | | ID: SBX-120 (0x0083) | | | Serial: F5B3A8 | | | _ | | |/ | | | | RX Frontend: 0 | | | | Name: SBX-120 RX | | | | Antennas: TX/RX, RX2, CAL | | | | Sensors: lo_locked | | | | Freq range: 400.000 to 4400.000 MHz | | | | Gain range PGA0: 0.0 to 31.5 step 0.5 dB | | | | Bandwidth range: 12000.0 to 12000.0 step 0.0 Hz | | | | Connection Type: IQ | | | | Uses LO offset: No | | | _ | | |/ | | | | RX Codec: B | | | | Name: ads62p48 | | | | Gain range digital: 0.0 to 6.0 step 0.5 dB | | _ | |/ | | | TX Dboard: A | | | ID: WBX-120 (0x0080) | | | Serial: F5FB72 | | | ID: WBX + Simple GDB, WBX v3 + Simple GDB, WBX v4 + Simple GDB, WBX-120 + Simple GDB (0x004f) | | | Serial: F5E6B6 | | | _ | | |/ | | | | TX Frontend: 0 | | | | Name: WBX-120 TX+GDB | | | | Antennas: TX/RX, CAL | | | | Sensors: lo_locked | | | | Freq range: 25.000 to 2200.000 MHz | | | | Gain range PGA0: 0.0 to 31.0 step 1.0 d
