On 22/02/2018 15:58, Till Wegmüller via illumos-discuss wrote:
Hi devlopers
I have a device that is Blowing my fmadm errorlog to 8 Gigabyte. All
with error messages about unknown telemetry.
It will probably continue growing until the Harddisk is full. If i try
to fmadm rotate errlog it refuses stating that the log is to busy to
rotate. That is not a nice behaviour per default. Can I shut that off in
some way? Or does somebody need to add the device as a module? If so
what would you need to add the device? My server is a
HP-Proliant-MicroServer Generation 10 so i gues some other people will
benefit aswell if that server chassis is supported.
Attached is the output of fmadm faulty if that helps.
Thank you for any help or feedback
The device is an AHCI SATA controller,
https://pci-ids.ucw.cz/read/PC/1022/7901
If there's a disk controller in the BIOS which you're not using, try
disabling it.
Or if there's one which is disabled, try enabling it (could be because
disabling it doesn't make it go completely away but stops it working).
It's likely the driver needs updating to cope with some behaviour in
your case which it isn't handling, but if you're lucky, twiddling some
knobs in the BIOS might be a workaround.
--
Andrew Gabriel
------------------------------------------
illumos-discuss
Archives:
https://illumos.topicbox.com/groups/discuss/discussions/T2ebed7db0d3f123d-M63594235c7bf7c2f351e1277
Powered by Topicbox: https://topicbox.com
