Re: [DNG] Error with upgrading Pi2 from Raspbian Wheezy to Devuan Jessie
On 13-06-18 19:42, Arnt Karlsen wrote: > On Wed, 13 Jun 2018 11:01:37 +0200, info wrote in message > <09b7eee9-cd24-4615-a9c0-8eb52c1c6...@smallinnovations.nl>: > >> I now remember (and checked) this is not a RPi 2 but the last RPi 1 B >> in my collection of Pi's. I should have known because my other >> (newer) Pi's are running Devuan Jessie and ASCII without any problem. >> >> Although i do have a backup i have adapted my sources.list to Raspbian >> Jessie and upgrading it seems to work. > ..you're upgrading your RPi 1 B to Raspbian Jessie, and not to > Devuan Jessie or ASCII??? > My intention was to upgrade Raspbian Wheezy to Devuan Jessie but as Greg noted this is not gonna work on a Pi 1 B. Because of the ARM6 with VF and not a real ARM7 chip. After realizing this I changed the apt sources.list to point to Raspbian Jessie. Which seemed to work but does not because the packages installed with ARMHF for ARM7 are not overwritten with the Raspbian version. So I have restored my backup and stay at Wheezy until i have a spare Pi 2 or 3 to replace this Pi 1 B. It does not do anything on the internet so the danger of no security updates is limited. Grtz. Nick ___ Dng mailing list Dng@lists.dyne.org https://mailinglists.dyne.org/cgi-bin/mailman/listinfo/dng
Re: [DNG] Error with upgrading Pi2 from Raspbian Wheezy to Devuan Jessie
On Wed, 13 Jun 2018 11:01:37 +0200, info wrote in message <09b7eee9-cd24-4615-a9c0-8eb52c1c6...@smallinnovations.nl>: > I now remember (and checked) this is not a RPi 2 but the last RPi 1 B > in my collection of Pi's. I should have known because my other > (newer) Pi's are running Devuan Jessie and ASCII without any problem. > > Although i do have a backup i have adapted my sources.list to Raspbian > Jessie and upgrading it seems to work. ..you're upgrading your RPi 1 B to Raspbian Jessie, and not to Devuan Jessie or ASCII??? -- ..med vennlig hilsen = with Kind Regards from Arnt Karlsen ...with a number of polar bear hunters in his ancestry... Scenarios always come in sets of three: best case, worst case, and just in case. ___ Dng mailing list Dng@lists.dyne.org https://mailinglists.dyne.org/cgi-bin/mailman/listinfo/dng
Re: [DNG] Error with upgrading Pi2 from Raspbian Wheezy to Devuan Jessie
On 13-06-18 01:52, Gregory Nowak wrote: > On Tue, Jun 12, 2018 at 09:34:01PM +0200, info at smallinnovations dot nl > wrote: >> I am trying to update one of my older Pi's 2 from Raspbian Wheezy to >> Devuan Jessie and have this strange error message: > > Someone correct me if I'm wrong. Raspbian jessie is armel based for > compatibility with the rpi1, while devuan jessie for the rpi2 is > armhf based. You're trying to upgrade armel packages with armhf > ones, which results in the segfaults you're getting. I'm not sure > it's possible to migrate from raspbian to devuan on the rpi2. Devuan > does have an image for the rpi1, which means there are armel packages > in the devuan repository. However, I'm not sure what you need to do > with your sources.list to get armel architecture on the rpi2. > > Unless you made a backup before starting the upgrade process, I'd say > you're already up the creek without a paddle. I'd suggest backing up > what you need to save, and writing a fresh devuan jessie image to your > sd card, or do a debootstrap if you're adventurous, and understand > how to debootstrap a foreign architecture. Good luck. > > Greg > > Thank you Greg. I now remember (and checked) this is not a RPi 2 but the last RPi 1 B in my collection of Pi's. I should have known because my other (newer) Pi's are running Devuan Jessie and ASCII without any problem. Although i do have a backup i have adapted my sources.list to Raspbian Jessie and upgrading it seems to work. Grtz. Nick ___ Dng mailing list Dng@lists.dyne.org https://mailinglists.dyne.org/cgi-bin/mailman/listinfo/dng
Re: [DNG] Error with upgrading Pi2 from Raspbian Wheezy to Devuan Jessie
On Tue, 12 Jun 2018 16:52:28 -0700, Gregory wrote in message <20180612235228.ga4...@gregn.net>: > On Tue, Jun 12, 2018 at 09:34:01PM +0200, info at smallinnovations > dot nl wrote: > > I am trying to update one of my older Pi's 2 from Raspbian Wheezy to > > Devuan Jessie and have this strange error message: > > > Someone correct me if I'm wrong. Raspbian jessie is armel based for > compatibility with the rpi1, ...and the good folks at raspberrypi.org messed it up by calling their ARM(el)-v6-with-math-hw arch, "armhf", which "everyone else" use for ARMv7 hw. > while devuan jessie for the rpi2 is > armhf based. You're trying to upgrade armel packages with armhf > ones, ..for the rpi1, I could believe the opposite, upgrading or migrating from "armhf" to armel. (We do this right, right?) > which results in the segfaults you're getting. I'm not sure > it's possible to migrate from raspbian to devuan on the rpi2. Devuan > does have an image for the rpi1, which means there are armel packages > in the devuan repository. However, I'm not sure what you need to do > with your sources.list to get armel architecture on the rpi2. ..I have 2 rpi-1s, one on Raspian Jessie, and one on Raspian Wheezy which we can play with as a migration and/or upgrade guinea pigs. > Unless you made a backup before starting the upgrade process, I'd say > you're already up the creek without a paddle. I'd suggest backing up > what you need to save, ..not a concern with my guinea pigs. ;o) > and writing a fresh devuan jessie image to your sd card, or do a > debootstrap if you're adventurous, and understand how to debootstrap > a foreign architecture. Good luck. -- ..med vennlig hilsen = with Kind Regards from Arnt Karlsen ...with a number of polar bear hunters in his ancestry... Scenarios always come in sets of three: best case, worst case, and just in case. ___ Dng mailing list Dng@lists.dyne.org https://mailinglists.dyne.org/cgi-bin/mailman/listinfo/dng
Re: [DNG] Error with upgrading Pi2 from Raspbian Wheezy to Devuan Jessie
On Tue, Jun 12, 2018 at 09:34:01PM +0200, info at smallinnovations dot nl wrote: > I am trying to update one of my older Pi's 2 from Raspbian Wheezy to > Devuan Jessie and have this strange error message: Someone correct me if I'm wrong. Raspbian jessie is armel based for compatibility with the rpi1, while devuan jessie for the rpi2 is armhf based. You're trying to upgrade armel packages with armhf ones, which results in the segfaults you're getting. I'm not sure it's possible to migrate from raspbian to devuan on the rpi2. Devuan does have an image for the rpi1, which means there are armel packages in the devuan repository. However, I'm not sure what you need to do with your sources.list to get armel architecture on the rpi2. Unless you made a backup before starting the upgrade process, I'd say you're already up the creek without a paddle. I'd suggest backing up what you need to save, and writing a fresh devuan jessie image to your sd card, or do a debootstrap if you're adventurous, and understand how to debootstrap a foreign architecture. Good luck. Greg -- web site: http://www.gregn.net gpg public key: http://www.gregn.net/pubkey.asc skype: gregn1 (authorization required, add me to your contacts list first) If we haven't been in touch before, e-mail me before adding me to your contacts. -- Free domains: http://www.eu.org/ or mail dns-mana...@eu.org ___ Dng mailing list Dng@lists.dyne.org https://mailinglists.dyne.org/cgi-bin/mailman/listinfo/dng
[DNG] Error with upgrading Pi2 from Raspbian Wheezy to Devuan Jessie
I am trying to update one of my older Pi's 2 from Raspbian Wheezy to Devuan Jessie and have this strange error message: Preparing to replace libc6:armhf 2.13-38+rpi2+deb7u12 (using .../libc6_2.19-18+deb8u10_armhf.deb) ... Checking for services that may need to be restarted... Checking init scripts... Unpacking replacement libc6:armhf ... dpkg: warning: subprocess old post-removal script was killed by signal (Segmentation fault) dpkg: trying script from the new package instead ... dpkg: error processing /var/cache/apt/archives/libc6_2.19-18+deb8u10_armhf.deb (--unpack): subprocess new post-removal script was killed by signal (Segmentation fault) dpkg: error while cleaning up: subprocess installed pre-installation script was killed by signal (Segmentation fault) Errors were encountered while processing: /var/cache/apt/archives/libc6_2.19-18+deb8u10_armhf.deb E: Sub-process /usr/bin/dpkg returned an error code (1) I do not have the slightest idea what it means. Someone seen the same error and or has a solution? Apt-get -f install generates the same error. Grtz. Nick ___ Dng mailing list Dng@lists.dyne.org https://mailinglists.dyne.org/cgi-bin/mailman/listinfo/dng
