Hi Alec,
Le Fri, 23 Dec 2016 20:04:55 -0500
Alec Robertson a écrit:
> When using sequential IP, the IP allocation should start from the
> lowest available IP address.
>
> However, if the lease time is quite short for the clients, the
> clients can renew their IP addresses and be given IP addres
On 12/23/2016 08:04 PM, Alec Robertson wrote:
When using sequential IP, the IP allocation should start from the lowest
available IP address.
this depends on the implementation... some start at the bottom (lowest) and
others start at the top (highest)... where they start does not really matter.
Thank you for your replies.
What I mean (as I said I didn’t explain it very well), is that the
sequential IP feature results in lots of empty IP addresses, so effectively
you end up with a much smaller range of possible IP addresses.
I was requesting the ability for dnsmasq to look through the en
Hi again Alec,
Le Sat, 24 Dec 2016 06:55:09 -0800
Alec Robertson a écrit:
> Thank you for your replies.
>
> What I mean (as I said I didn’t explain it very well), is that the
> sequential IP feature results in lots of empty IP addresses, so
> effectively you end up with a much smaller range of
My apologies for the unclear explanation.
For background I am using OpenWRT/LEDE r2544-a032940, on a TP-LINK Archer
C7.
For a test, if you set the leasetime to be very short, say 2 minutes and
connect multiple devices, they will at first be given IPs in sequential
order starting from the lowest a
I understand what you’re saying but I was suggesting this should be a
feature enhancement. All the other routers I have used work the way I have
described, be it NETGEAR, Asus, Huawei, etc.
___
Dnsmasq-discuss mailing list
Dnsmasq-discuss@lists.thekelleys
Bonjour,
Le Sat, 24 Dec 2016 16:15:23 -0500
Alec Robertson a écrit:
> My apologies for the unclear explanation.
>
> For background I am using OpenWRT/LEDE r2544-a032940, on a TP-LINK
> Archer C7.
>
> For a test, if you set the leasetime to be very short, say 2 minutes
> and connect multiple de
