Re: [libreoffice-documentation] Re[2]: Calc Guide v7.0
Hello Dan, Thanks for updating the bug. I did a few actions suggested by a developer and the issue were still present. Apparently, now they have assigned the bug to someone. Best regards, Felipe Viggiano Em qua., 26 de ago. de 2020 às 18:40, Dan Lewis escreveu: > Recently I have bought new tower computer and have dual booted Windows 10 > and buntu20.04. This afternoon, I downloaded 7.0.1.1 for windows (Dated 14 > August 2020)and installed it. When I ran Calc, I entered 1-10 in column A > in rows 1-10. In B1 I entered this formula: ATAN(A1). Then I drug this > formula down to B10. Then I pressed "Ctrl+`". Cell B1-B10 changed from the > arc tangent values to the formulas. So, this is not a bug for the > pre-releases that I use. I will update the bug a little later today. > > Dan > On 8/26/20 14:56, Felipe Viggiano wrote: > > Hello Dan, > > Apparently it's something with the release version. I did the report on > Bugzilla (https://bugs.documentfoundation.org/show_bug.cgi?id=136129) and > this was confirmed by another user, with the 7.1.0.0.alpha0+ version. > In my case, I have installed the 7.0.0.3 version on Ubuntu (20.04 as > well). > Best regards, > Felipe Viggiano > > Em qua., 26 de ago. de 2020 às 12:22, Dan Lewis > escreveu: > >> I use Ubuntu 20.04 and 7.0.1.1 (pre-release) from the LibreOffice >> website. "Ctrl+`" works just like View > Show Formula. Now there might >> be a problem with Ubuntu's release of LibreOffice... >> >> Dan >> >> On 8/25/20 13:56, Steve (GMail) wrote: >> > Hi Felipe, >> > >> > I am a little concerned about the failure of the View > Show Formula >> > shortcut on your system. I have seen this shortcut work on an Ubuntu >> > installation (albeit using LO 6.4) running in a Virtual Terminal in >> > VMware. If there's a problem with the Linux implementation in this >> > respect, we'll need to update Appendix A as well. >> > >> > Does the menu option contain the string "Ctrl+`" in your >> > installation? It is simply that the shortcut doesn't work? Are we in >> > "bug" territory again? >> > >> > Regards, >> > >> > Steve >> > >> > >> > -- Original Message -- >> > From: "Felipe Viggiano" >> > To: "Steve (GMail)" >> > Cc: "Documentation Team" >> > Sent: 25/08/2020 02:49:35 >> > Subject: Re: Re[9]: [libreoffice-documentation] Re[2]: Calc Guide v7.0 >> > >> >> Hello Steve, >> >> >> >> Thanks for the feedback! >> >> >> >> About the shortcut, I"m currently using Linux (Ubuntu), but it could >> >> be a distribution difference. May I suggest something like this: >> >> >> >> Formulas can be toggled on / off in the menu option View > Show >> >> Formula, and, depending on the operational system, by the shortcut >> >> Ctrl+` (grave accent). >> >> >> >> About the multi-threading, I can understand that this could be useful >> >> information for advanced users. >> >> >> >> Best regards, >> >> Felipe Viggiano >> >> >> >> Em seg., 24 de ago. de 2020 às 15:53, Steve (GMail) >> >> escreveu: >> >>> Hi Felipe, >> >>> >> >>> Many thanks for the comments on Chapter 7 (Using Formulas and >> >>> Functions). I have actioned most of the points you raised, and the >> >>> document is now in the Draft for second review. >> >>> >> >>> A few matters arising: >> >>> In the section entitled “Compatibility with other spreadsheet >> >>> applications”, I’ve amended the number of functions that are unique to >> >>> Calc. It now reads 30, to match the functions listed on the referenced >> >>> wiki page, rather than the total number stated on that page! >> >>> With regards to your comment that the keyboard shortcut associated >> with >> >>> View > Show Formula does not work for you. I believe that the shortcut >> >>> works on Windows and Linux, but I do not think there is a >> corresponding >> >>> key sequence for macOS. This is already reflected in Appendix A and I >> >>> have updated the Tip after Figure 19 to clarify further. >> >>> In the section entitled “Multi-threading”, I decided to retain the >> last >> >>> paragraph. I think it is quite legitimate to draw a reader’s attention >> >>> to there being other ways (for power users) to control >> multi-threading, >> >>> even though they are not described in the guide. >> >>> >> >>> Thanks again. >> >>> >> >>> Regards, >> >>> >> >>> Steve >> >>> >> >>> >> >>> >> >>> -- Original Message -- >> >>> From: "Felipe Viggiano" >> >>> To: "Steve (GMail)" >> >>> Cc: "Documentation Team" >> >>> Sent: 22/08/2020 02:14:18 >> >>> Subject: Re: Re[7]: [libreoffice-documentation] Re[2]: Calc Guide v7.0 >> >>> >> >>> >Hello everyone, >> >>> > >> >>> >Steve, >> >>> > >> >>> >Just uploaded a first review on the CG7007 - FormulasAndFunction. >> >>> > >> >>> >Only a few minor suggestions. The chapter is very well written and I >> >>> >managed to reproduce and understand every step and orientation. >> >>> > >> >>> >I'm checking out the CG7008 - Pivot Tables for a first review. Expect >> >>> >to return it by Thursday (27Ago2020). >> >>> > >> >>> >The Calc Status
Re: [libreoffice-documentation] Re[2]: Calc Guide v7.0
Hello everyone, Steve, Just uploaded the first review on the CG7008 - Pivot Tales in the Feedback folder. I did manage to reproduce and understand all the directions made in the document, so the review contains just a few minor suggestions. The Calc Status Guide has been updated. Best regards, Felipe Viggiano Em qua., 26 de ago. de 2020 às 18:40, Dan Lewis escreveu: > Recently I have bought new tower computer and have dual booted Windows 10 > and buntu20.04. This afternoon, I downloaded 7.0.1.1 for windows (Dated 14 > August 2020)and installed it. When I ran Calc, I entered 1-10 in column A > in rows 1-10. In B1 I entered this formula: ATAN(A1). Then I drug this > formula down to B10. Then I pressed "Ctrl+`". Cell B1-B10 changed from the > arc tangent values to the formulas. So, this is not a bug for the > pre-releases that I use. I will update the bug a little later today. > > Dan > On 8/26/20 14:56, Felipe Viggiano wrote: > > Hello Dan, > > Apparently it's something with the release version. I did the report on > Bugzilla (https://bugs.documentfoundation.org/show_bug.cgi?id=136129) and > this was confirmed by another user, with the 7.1.0.0.alpha0+ version. > In my case, I have installed the 7.0.0.3 version on Ubuntu (20.04 as > well). > Best regards, > Felipe Viggiano > > Em qua., 26 de ago. de 2020 às 12:22, Dan Lewis > escreveu: > >> I use Ubuntu 20.04 and 7.0.1.1 (pre-release) from the LibreOffice >> website. "Ctrl+`" works just like View > Show Formula. Now there might >> be a problem with Ubuntu's release of LibreOffice... >> >> Dan >> >> On 8/25/20 13:56, Steve (GMail) wrote: >> > Hi Felipe, >> > >> > I am a little concerned about the failure of the View > Show Formula >> > shortcut on your system. I have seen this shortcut work on an Ubuntu >> > installation (albeit using LO 6.4) running in a Virtual Terminal in >> > VMware. If there's a problem with the Linux implementation in this >> > respect, we'll need to update Appendix A as well. >> > >> > Does the menu option contain the string "Ctrl+`" in your >> > installation? It is simply that the shortcut doesn't work? Are we in >> > "bug" territory again? >> > >> > Regards, >> > >> > Steve >> > >> > >> > -- Original Message -- >> > From: "Felipe Viggiano" >> > To: "Steve (GMail)" >> > Cc: "Documentation Team" >> > Sent: 25/08/2020 02:49:35 >> > Subject: Re: Re[9]: [libreoffice-documentation] Re[2]: Calc Guide v7.0 >> > >> >> Hello Steve, >> >> >> >> Thanks for the feedback! >> >> >> >> About the shortcut, I"m currently using Linux (Ubuntu), but it could >> >> be a distribution difference. May I suggest something like this: >> >> >> >> Formulas can be toggled on / off in the menu option View > Show >> >> Formula, and, depending on the operational system, by the shortcut >> >> Ctrl+` (grave accent). >> >> >> >> About the multi-threading, I can understand that this could be useful >> >> information for advanced users. >> >> >> >> Best regards, >> >> Felipe Viggiano >> >> >> >> Em seg., 24 de ago. de 2020 às 15:53, Steve (GMail) >> >> escreveu: >> >>> Hi Felipe, >> >>> >> >>> Many thanks for the comments on Chapter 7 (Using Formulas and >> >>> Functions). I have actioned most of the points you raised, and the >> >>> document is now in the Draft for second review. >> >>> >> >>> A few matters arising: >> >>> In the section entitled “Compatibility with other spreadsheet >> >>> applications”, I’ve amended the number of functions that are unique to >> >>> Calc. It now reads 30, to match the functions listed on the referenced >> >>> wiki page, rather than the total number stated on that page! >> >>> With regards to your comment that the keyboard shortcut associated >> with >> >>> View > Show Formula does not work for you. I believe that the shortcut >> >>> works on Windows and Linux, but I do not think there is a >> corresponding >> >>> key sequence for macOS. This is already reflected in Appendix A and I >> >>> have updated the Tip after Figure 19 to clarify further. >> >>> In the section entitled “Multi-threading”, I decided to retain the >> last >> >>> paragraph. I think it is quite legitimate to draw a reader’s attention >> >>> to there being other ways (for power users) to control >> multi-threading, >> >>> even though they are not described in the guide. >> >>> >> >>> Thanks again. >> >>> >> >>> Regards, >> >>> >> >>> Steve >> >>> >> >>> >> >>> >> >>> -- Original Message -- >> >>> From: "Felipe Viggiano" >> >>> To: "Steve (GMail)" >> >>> Cc: "Documentation Team" >> >>> Sent: 22/08/2020 02:14:18 >> >>> Subject: Re: Re[7]: [libreoffice-documentation] Re[2]: Calc Guide v7.0 >> >>> >> >>> >Hello everyone, >> >>> > >> >>> >Steve, >> >>> > >> >>> >Just uploaded a first review on the CG7007 - FormulasAndFunction. >> >>> > >> >>> >Only a few minor suggestions. The chapter is very well written and I >> >>> >managed to reproduce and understand every step and orientation. >> >>> > >> >>> >I'm checking out the CG7008 - Pivot Tables
[libreoffice-documentation] Documentation Team Meeting Minutes August 27th 2020
Documentation Team Meeting Minutes August 27th 2020 at 18:00 UTC. Presents: Steve Fanning, Dan Lewis, Felipe Viggiano, Olivier, Sam, Emiliano Vavassori. Telegram Channel https://t.me/joinchat/ALeRuUFCxyZY0wzoddldWQ Live TDF Jitsi Room https://jitsi.documentfoundation.org/tdfdocteam Completed items: * Update Contributor Guide for e-PUB - Tabs issue + See discussion below, e-pub may not worth effort. Pending items: News: Base Guide development (Dan) + Pulkit invitation to comment on the document for the outline. + Please comment. Topics and Discussion: Calc: what is a simple database? (Dan) + Calc Databases are "flat" + Should we name Calc database as "flat database"? (Dan) + Remove "simple" in the chapter title. Epub: * about epub quality (Olivier) + Some issues with export to e-pub (Olivier) + Energy to spend in fixing export (olivier) + Is E-pub a popular format today? (Olivier) * Suggested readers? + Calibre hard to use, low quality (olivier) + What is the advantage of e-pub? (Emiliano) + Most e-readers handle PDF well (Emiliano) + LibreOffice Magazine (Brazil) was edited in A5 format (Olivier) + In *theory*, just change page size. + Publish 2 PDF's? (open question) Templates: Where we stand? (Steve) + Calc Guide getting ready for publication (steve) + Need a decision on the template (steve) + Not sure how to select best template (olivier) + Ask design team for advise (Sam) AI:+ Ping Jean W. and Peter S. for comments in mailing list. Meeting adjourned. Next meeting : *THURSDAY* September 10th 2020 at 18:00 UTC. -- Olivier Hallot LibreOffice Documentation Coordinator Comunidade LibreOffice Rio de Janeiro - Brasil - Local Time: UTC-03:00 http://tdf.io/joinus -- To unsubscribe e-mail to: documentation+unsubscr...@global.libreoffice.org Problems? https://www.libreoffice.org/get-help/mailing-lists/how-to-unsubscribe/ Posting guidelines + more: https://wiki.documentfoundation.org/Netiquette List archive: https://listarchives.libreoffice.org/global/documentation/ Privacy Policy: https://www.documentfoundation.org/privacy
[libreoffice-documentation] REMIND: Documentation team call is today at 18:00 UTC
Hi Documentation Team (Guides, Help contents) ! Our documentation team meeting will take place today at 18:00 UTC We will use the following jitsi meeting room https://jitsi.documentfoundation.org/tdfdocteam The meeting room is supposed to work will all browsers without the need of a specific plugin. You can use a mobile app in your Android or Iphone. The documentation pad for the meeting minute is http://pad.documentfoundation.org/p/documentation Main topics: Please fill the topics you want to discuss in the pad. See you later! -- Olivier Hallot LibreOffice Documentation Coordinator Comunidade LibreOffice Rio de Janeiro - Brasil - Local Time: UTC-03:00 http://tdf.io/joinus -- To unsubscribe e-mail to: documentation+unsubscr...@global.libreoffice.org Problems? https://www.libreoffice.org/get-help/mailing-lists/how-to-unsubscribe/ Posting guidelines + more: https://wiki.documentfoundation.org/Netiquette List archive: https://listarchives.libreoffice.org/global/documentation/ Privacy Policy: https://www.documentfoundation.org/privacy
Re: [libreoffice-documentation] Documentation Pad
HI Dan Meeting is confirmed... Remind is to follow Olivier Em 27/08/2020 10:36, Dan Lewis escreveu: > What happened to this? I have this bookmarked, but someone else is using > this website: > > https://pad.documentfoundation.org/p/documentation. > > Is there going to be a meeting this afternoon at 1800 UCT? Oliver > usually sends out a message by now to remind us? > > Dan > > > -- Olivier Hallot LibreOffice Documentation Coordinator Comunidade LibreOffice Rio de Janeiro - Brasil - Local Time: UTC-03:00 http://tdf.io/joinus -- To unsubscribe e-mail to: documentation+unsubscr...@global.libreoffice.org Problems? https://www.libreoffice.org/get-help/mailing-lists/how-to-unsubscribe/ Posting guidelines + more: https://wiki.documentfoundation.org/Netiquette List archive: https://listarchives.libreoffice.org/global/documentation/ Privacy Policy: https://www.documentfoundation.org/privacy
[libreoffice-documentation] Documentation Pad
What happened to this? I have this bookmarked, but someone else is using this website: https://pad.documentfoundation.org/p/documentation. Is there going to be a meeting this afternoon at 1800 UCT? Oliver usually sends out a message by now to remind us? Dan -- To unsubscribe e-mail to: documentation+unsubscr...@global.libreoffice.org Problems? https://www.libreoffice.org/get-help/mailing-lists/how-to-unsubscribe/ Posting guidelines + more: https://wiki.documentfoundation.org/Netiquette List archive: https://listarchives.libreoffice.org/global/documentation/ Privacy Policy: https://www.documentfoundation.org/privacy
[libreoffice-documentation] Re: Base Guide 7.0 outline
On 8/22/20 08:12, Pulkit Krishna wrote: Hello everybody, Dan, I have uploaded an outline of base guide 7.0 in 7.0 folder of Base Guide folder on Nextcloud. Please give any suggestion/Feedback you have. I will wait till 24 August and after that I will start working on chapter 1- Introducing Base. Pulkit Krishna I have read your outline and do not see any problems with it. I have copies of my chapter 2 Planing/Designing Your Database as new as 5.0. Do you want me to start updating this chapter? Is there anything specific that you would like to have changed? Also, I now have access to Windows 10 with LibreOffice 7.0.1.1 (pre-release) installed. (I also have the same Deban version on Ubuntu 20.04.) I can create any needed screenshots from there. Dan -- To unsubscribe e-mail to: documentation+unsubscr...@global.libreoffice.org Problems? https://www.libreoffice.org/get-help/mailing-lists/how-to-unsubscribe/ Posting guidelines + more: https://wiki.documentfoundation.org/Netiquette List archive: https://listarchives.libreoffice.org/global/documentation/ Privacy Policy: https://www.documentfoundation.org/privacy
Re: [libreoffice-documentation] Chart Data Labels, text label displayed with "Show category"
All, I have included a suitable note in Chapter 3 of the draft 7.0 Calc Guide. The proposed text is in the latest version of the file in the relevant Draft folder in Nextcloud (I did the edit with change tracking on, so it's easy to find). Felipe, as you kindly performed the first review of this chapter, please could you inspect the change and let me know if you spot any problems with it? Thanks in advance. Regards, Steve -- Original Message -- From: "Ilmari Lauhakangas" To: "LibreOffice Documentation" Sent: 26/08/2020 18:40:58 Subject: [libreoffice-documentation] Chart Data Labels, text label displayed with "Show category" There was a bug report about displaying data labels, which are pulled from a cell range: https://bugs.documentfoundation.org/show_bug.cgi?id=132280 It appears to me that the passages in Help and Calc Guide might benefit from more elaboration on this topic. Just thought I would throw this out here immediately for feedback. I can do a patch for Help, if someone comes up with a proposal. Ilmari -- To unsubscribe e-mail to: documentation+unsubscr...@global.libreoffice.org Problems? https://www.libreoffice.org/get-help/mailing-lists/how-to-unsubscribe/ Posting guidelines + more: https://wiki.documentfoundation.org/Netiquette List archive: https://listarchives.libreoffice.org/global/documentation/ Privacy Policy: https://www.documentfoundation.org/privacy -- To unsubscribe e-mail to: documentation+unsubscr...@global.libreoffice.org Problems? https://www.libreoffice.org/get-help/mailing-lists/how-to-unsubscribe/ Posting guidelines + more: https://wiki.documentfoundation.org/Netiquette List archive: https://listarchives.libreoffice.org/global/documentation/ Privacy Policy: https://www.documentfoundation.org/privacy