> On 19/02/2024 22:17 EET Ryan Ford wrote:
>
>
> Hello,
> Would you be able to show what you did in order to make this command
> unsubscribe as well? The link provided with the answer, no longer works.
>
> Thank you, Ryan
>
doveadm mailbox unsubscribe -u
Aki
Hello,
Would you be able to show what you did in order to make this command
unsubscribe as well? The link provided with the answer, no longer works.
Thank you, Ryan
___
dovecot mailing list -- dovecot@dovecot.org
To unsubscribe send an email to
I am having the same issue with 2.3.11.3
In webhosting customers usually see their physical disk usage used (quota on
filesystem), and it causes a lot of confusion when numbers don't match with
doveadm quota at all.
What's your opinion on these:
1) Should indexes (including FTS indexes stored in Maildir) be counted in the
mail quota?
I think that most admins do not really care about physical disk usage as
long as it's not exceeded, and most service providers prefer calculating
quota against apparent usage instead of real usage, so they can charge
you for that.
Aki
On 8.2.2020 18.16, Martynas Bendorius wrote:
> Doesn't it
Doesn't it currently confuse them? Because they'd reach their quota, while
actually there would be a lot of disk space left :) + their whole mailbox could
take a lot more space due to indexes and other files in the filesystem, and
quota would not be reached.
Also, I've dovecot is using fstat's
I think these changes will confuse users because calculated quota
wouldn't be equals with total messages sizes.
Marsistynas Bendorius писал 2020-02-07 11:07:
Is there any reason why dovecot relies on S= instead of real disk size
email takes?
1) compressed mails take less than than the S=
Hello,
Is there any reason why dovecot relies on S= instead of real disk size email
takes?
1) compressed mails take less than than the S= specified
2) we could avoid using "S=" for the lookups and count every file there,
including indexes and mails without S=... if we'd read filesizes
Eample:
Hi,
I'm experiencing serious issues when using doveadm sync not working at
all or do not properly sync. I wanted to use this for migrating external
mailboxes to my server (in order to overcome the time when some
servers/clients still use the old server and some already the my server).
I tried to
for replication.
Thanks in advance.
dovecot: doveadm: Error: safe_mkstemp(/tmp/dovecot.doveadm.) failed:
Permission denied
Arkadiusz Majewski
From: Arkadiusz Majewski
Sent: Sunday, December 3, 2017 7:38 PM
To: 'dovecot@dovecot.org'
Subject: Dovecot (doveadm, ssl, sync) - SSL error
Hello
.
dovecot: doveadm: Error: safe_mkstemp(/tmp/dovecot.doveadm.) failed:
Permission denied
Arkadiusz Majewski
From: Arkadiusz Majewski <maje...@gmail.com>
Sent: Sunday, December 3, 2017 7:38 PM
To: 'dovecot@dovecot.org' <dovecot@dovecot.org>
Subject: Dovecot (doveadm, ssl,
: 2.2.33.2_2 and the older one dovecot-2.2.32.1_1 (or similar) -
build by ports.
OpenSSL: 1.0.2k-freebsd 26 Jan 2017
dovecot: doveadm(10.18.1.15): Error: doveadm client disconnected before
handshake: SSL_accept() failed: error:140760FC:SSL
routines:SSL23_GET_CLIENT_HELLO:unknown protocol
Yes, after an upgrade works fine.
Hello,
Unfortunately this issue hits again. I installed the latest stable
version 2.2.15 and got the following error
# doveadm expunge -u ^o^@dave.s484.qa-team.net mailbox 'INBOX.Junk
Mail' SAVEDBEFORE 7d
doveadm(^o^@dave.s484.qa-team.net): Error: userdb
Am 12.12.2014 um 14:45 schrieb David Davidov:
Yes, after an upgrade works fine.
Hello,
Unfortunately this issue hits again. I installed the latest stable
version 2.2.15 and got the following error
# doveadm expunge -u ^o^@dave.s484.qa-team.net mailbox 'INBOX.Junk
Mail' SAVEDBEFORE 7d
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Thu, 5 Jun 2014, Bruno Galindro da Costa wrote:
My ldap config is using the variable %d in base search for domain
replacement when dovecot will search for users in LDAP. Its works fine
for
dovecot operation.
But, for doveadm index, not. It
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Thu, 5 Jun 2014, Bruno Galindro da Costa wrote:
My ldap config is using the variable %d in base search for domain
replacement when dovecot will search for users in LDAP. Its works fine for
dovecot operation.
When an user logs into Dovecot, the
ok tks!
2014-06-06 3:16 GMT-03:00 Steffen Kaiser skdove...@smail.inf.fh-brs.de:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Thu, 5 Jun 2014, Bruno Galindro da Costa wrote:
My ldap config is using the variable %d in base search for domain
replacement when dovecot will search for
My ldap config is using the variable %d in base search for domain
replacement when dovecot will search for users in LDAP. Its works fine for
dovecot operation.
But, for doveadm index, not. It ignores that variable and tries to pass a
base search without domain. So, the search will not working.
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
As far as I understood
fetch -u p.heinl...@jpberlin.de hdr mailbox-guid [...]93d5 uid 58175
should fetch exactly the header of the specified mail. But on my
Dovecot 2.2.12 it fetches the header *twice* (same with body, same
with text).
/local/lib/dovecot/doveadm/lib10_doveadm_sieve_plugin.so...(no
debugging symbols found)...done.
Loaded symbols for
/usr/local/lib/dovecot/doveadm/lib10_doveadm_sieve_plugin.so
Reading symbols from
/usr/local/lib/dovecot-2.2-pigeonhole/libdovecot-sieve.so.0...(no debugging
symbols found)...done
I turned on fts_autoindex today, and wanted to rescan all my mailboxes
Ran doveadm -Dv fts rescan, and garnered:
thebighonker.lerctr.org /home/ler/mail $ doveadm -Dv fts rescan
doveadm(ler): Debug: Loading modules from directory:
/usr/local/lib/dovecot
doveadm(ler): Debug: Module loaded
Il 09/05/2014 11:50, Timo Sirainen ha scritto:
On 9.5.2014, at 10.21, Alessio Cecchi ales...@skye.it wrote:
I'm running every week in cron doveadm expunge -A mailbox Spam before 30d and monthly
doveadm quota recalc -A.
After the upgrade to dovecot 2.2.12 (from 2.1.17), doveadm -A sometimes
Not intentional, and since it can cause confusion I removed it:
http://hg.dovecot.org/dovecot-2.2/rev/3a5304b63f88
On 18.4.2014, at 10.54, Axel Luttgens axel.luttg...@skynet.be wrote:
Hello,
Still busy with details...
Considering, as in my previous example, a password_query returning '!'
Le 5 mai 2014 à 15:25, Timo Sirainen a écrit :
Not intentional, and since it can cause confusion I removed it:
http://hg.dovecot.org/dovecot-2.2/rev/3a5304b63f88
Hmmm... this was a too easy one. ;-)
Once again, many thanks Timo,
Axel
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Tue, 29 Apr 2014, Administrator BCS wrote:
Now trying to manually import some mbox files from the old server into
dovecot. Copied a mbox file to the new system, converted it to Maildir with
mb2md resulting in a directory containing the new, cur
Citeren Steffen Kaiser skdove...@smail.inf.fh-brs.de:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Tue, 29 Apr 2014, Administrator BCS wrote:
Now trying to manually import some mbox files from the old server
into dovecot. Copied a mbox file to the new system, converted it to
Maildir
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Tue, 29 Apr 2014, Administrator BCS wrote:
On Tue, 29 Apr 2014, Administrator BCS wrote:
Now trying to manually import some mbox files from the old server into
dovecot. Copied a mbox file to the new system, converted it to Maildir
with mb2md
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Tue, 29 Apr 2014, Administrator BCS wrote:
mail_location = maildir:/home/vmail/%d/%n
userdb {
args = /etc/dovecot/dovecot-sql.conf.ext
driver = sql
}
BTW: What home directory are you using? It is not recommended to run with
mail (dir)
Citeren Steffen Kaiser skdove...@smail.inf.fh-brs.de:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Tue, 29 Apr 2014, Administrator BCS wrote:
mail_location = maildir:/home/vmail/%d/%n
userdb {
args = /etc/dovecot/dovecot-sql.conf.ext
driver = sql
}
BTW: What home directory are
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Administrator BCS wrote:
Citeren Steffen Kaiser skdove...@smail.inf.fh-brs.de:
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1
On Tue, 29 Apr 2014, Administrator BCS wrote:
mail_location = maildir:/home/vmail/%d/%n
userdb { args =
Hello,
Still busy with details...
Considering, as in my previous example, a password_query returning '!' or NULL
for the nologin column, depending on an account's status (suspended or not).
Let's consider a suspended user some.user.
In the case of a successful authentication, one has:
2014-03-11 20:41, Gedalya skrev:
doveadm search -u jane@example.org mailbox INBOX | cut -d -f2 |
head -n -200 | tr '\n' , | xargs -n1 doveadm expunge -u
jane@example.org mailbox INBOX uid
basically, get all uid's and use head to cut out all but the last 200,
turn that into a comma
I have a question?
Is it possible that with doveadm delete all but the last x-number of
messages in a folder. For example to retain the last 200 messages in the
folder.
If it is possible, how do you do it?
Something like doveadm expunge -u jane@example.org mailbox xxx
Thank you!
--
doveadm search -u jane@example.org mailbox INBOX | cut -d -f2 |
head -n -200 | tr '\n' , | xargs -n1 doveadm expunge -u
jane@example.org mailbox INBOX uid
basically, get all uid's and use head to cut out all but the last 200,
turn that into a comma separated list, and pass to dovadm
We're running Dovecot in a multipe instance cluster with individual
userdb-querys to different LDAP-Servers.
As far as I can see there's no way to use the
doveadm mailbox
command with different Auth-Sockets or different configurations.
While
root@dobby4:/etc/dovecot# doveadm user -a
/var/run
Hello,
looks like a cosmetical problem but I like to mention it though:
doveadm stats top is interactive. To exit I press as usual CTRL+C and get
^Cdoveadm(root): Error: close(-1[doveadm-stats.c:496]) failed: Interrupted
system call
It's dovecot-2.2.10.
Andreas
Hello,
I recently noticed a small bug in the doveadm table formatter: hidden titles
may cause the headers to be misaligned.
The behavior in question was introduced by commit
http://hg.dovecot.org/dovecot-2.2/rev/210282ae46e1 and
doveadm -f table quota get -A
may be used to reproduce it.
Most
On 11/02/2013 08:32 AM, Timo Sirainen wrote:
On 26.9.2013, at 16.11, Chris Lasater vorg...@gmail.com wrote:
While testing some more I found out something else. I have an alias set for
doveadm so it was running with sudo and that ended up being part of the issue.
If doveadm is run as a
On 2.10.2013, at 16.46, Peer Heinlein p.heinl...@heinlein-support.de wrote:
As you can see, our namespace seperator is . and not /:
The problem is, that doveadm isn't able to import his own mdbox-directory:
# doveadm import -u max.muster mdbox:mdbox BACKUP all
doveadm(max.muster): Error:
On 26.9.2013, at 16.11, Chris Lasater vorg...@gmail.com wrote:
While testing some more I found out something else. I have an alias set for
doveadm so it was running with sudo and that ended up being part of the
issue. If doveadm is run as a regular user then the problem goes away
I received this message today, and remembered, you can't do that...
$ doveadm pw -s SHA512-CRYPT
Enter new password: doveadm(dan): Fatal: open(/dev/tty) failed: No such
file or directory
/pre
It seems if you have no tty, you can't create a password. Surely there
is a better way to do this?
Hi,
It sounds you have forgotten to mount /dev in the jail. You can consult
http://www.freebsd.org/doc/handbook/jails-build.html for all steps to do
this.
Regards,
Frank de Bot
Dan Langille wrote:
I received this message today, and remembered, you can't do that...
$ doveadm pw -s
On 2013-10-22 14:54, Frank de Bot wrote:
Dan Langille wrote:
I received this message today, and remembered, you can't do that...
$ doveadm pw -s SHA512-CRYPT
Enter new password: doveadm(dan): Fatal: open(/dev/tty) failed: No such
file or directory
/pre
It seems if you have no tty, you can't
On 2013-10-22 14:52, Dan Langille wrote:
I received this message today, and remembered, you can't do that...
$ doveadm pw -s SHA512-CRYPT
Enter new password: doveadm(dan): Fatal: open(/dev/tty) failed: No
such file or directory
/pre
It seems if you have no tty, you can't create a password.
Hi,
I'd like to remind to my question / bug-report some days ago.
Can anybody help?
Peer
Original-Nachricht
Betreff: [Dovecot] doveadm can't import his own mdboxes
Datum: Wed, 02 Oct 2013 15:46:12 +0200
Von: Peer Heinlein p.heinl...@heinlein-support.de
An: Dovecot Mailing
On Wed, Oct 09, 2013 at 02:24:04PM -0400, Chris Lasater wrote:
I figured this one out. The bug is associated with the default
run/dovecot base_dir. If you move both instances to a different
location then (or at least the one named dovecot) it works fine
and I can control both instances
Hey Rob,
I figured this one out. The bug is associated with the default
run/dovecot base_dir. If you move both instances to a different
location then (or at least the one named dovecot) it works fine and I
can control both instances properly.
Chris
On 09/26/2013 09:02 AM, /dev/rob0
We're running Dovecot 2.1.17 on Debian:
# 2.1.17 (9efbc0731929): /etc/dovecot/dovecot.conf
# OS: Linux 2.6.32-042stab078.27.debug i686 Debian 7.1 simfs
and we're having this namespace configuration:
mail_location = mdbox:/var/mail/%Ld/%Ln/mdbox
namespace inbox {
disabled = no
hidden = no
Could this bug have reappeared or not been passed to the 2.2.x release?
On 09/26/2013 07:06 PM, Daniel Parthey wrote:
Hi,
this bug should have been fixed by Timo in some 2.1.x release. The
issue should be in the list archives too. Which version are you using?
BTW: I'm still using
doveadm -c
On Thu, Sep 26, 2013 at 12:45:01AM -0400, Chris Lasater wrote:
I am trying to use 2 instances of Dovecot on the same server so I
can have a Director managing my connections, everything appears to
be working, but I can not use doveadm to control my 2nd instance,
but doveconf seems to work
While testing some more I found out something else. I have an alias set
for doveadm so it was running with sudo and that ended up being part of
the issue. If doveadm is run as a regular user then the problem goes away
[user@server ~]$ doveadm -i Director log find
Debug:
Hi,
this bug should have been fixed by Timo in some 2.1.x release. The issue should
be in the list archives too. Which version are you using?
BTW: I'm still using
doveadm -c /etc/dovecot-director/dovecot- director.conf director status
to address the director instance.
Regards
Daniel
I upgraded to 2.2.6 yesterday and was one 2.2.5 before.
On 09/26/2013 07:06 PM, Daniel Parthey wrote:
Hi,
this bug should have been fixed by Timo in some 2.1.x release. The
issue should be in the list archives too. Which version are you using?
BTW: I'm still using
doveadm -c
Hi Guys,
I am trying to use 2 instances of Dovecot on the same server so I can
have a Director managing my connections, everything appears to be
working, but I can not use doveadm to control my 2nd instance, but
doveconf seems to work fine.
[user@server logs]$ doveconf -i Director | grep
Hello,
I'm trying to find out what the different 'doveadm mailbox create' error
codes are. I've been looking through the source, but I can't seem to
find them.
I did determine that '65' happens when Error: Can't create mailbox x:
Mailbox already exists, but I've also received error 67, and the
Running Dovecot 2.1.7.
I'm trying to migrate from an environment with mbox files to a maildir
configuration.
I remove all vestiges of my maildir over in /var/mail
I put my old mailboxes in ./Mail and my old inbox in ./matthew.
I issue this command: doveadm sync -u matt...@matthew.at
I just tried the doveadm search command :
doveadm search -u *@mydomain.fr MAILBOX Junk : this command lists all emails
in Junk users folders : OK
doveadm search -u *@mydomain.fr MAILBOX Junk savedbefore 1d : don't lists
anything..
What am I missed ?
Is this the good way to change file date
nicolasfo wrote:
doveadm search -u *@mydomain.fr MAILBOX Junk savedbefore 1d : don't lists
anything..
What am I missed ?
Is this the good way to change file date (touch) and by this way, have
results to savedbefore command ?
No. The date.saved value is (I think) stored in its indices, and
On 21.6.2013, at 17.50, vincent truc vincent_graphi...@hotmail.com wrote:
I want to transfer an email from us...@domain.com to put it in a folder of
another user: us...@domain.com
For that, it seems to me appropriate to use 'doveadm move' command, but I can
not get the right result. Can
Hello
I want to transfer an email from us...@domain.com to put it in a folder of
another user: us...@domain.com
For that, it seems to me appropriate to use 'doveadm move' command, but I can
not get the right result. Can you help me?
syntax:
doveadm move [-u user|-A] [-S socket_path]
Hello
I want to forward an email to us...@domain.com box to the box us...@domain.com
For this I try to use 'doveadm move', but I'm having problems with the syntax.
Could you give me an example please?
thanks
On 6/19/2013 10:25 PM, vincent truc wrote:
Hello
I want to forward an email to us...@domain.com box to the box us...@domain.com
For this I try to use 'doveadm move', but I'm having problems with the syntax.
Could you give me an example please?
Assuming that you looked at man doveadm-move
Hi,
We store our mail archive in a tree of subfolders. I am trying to speed up text searching
on our mail archive but when running doveadm -D -v index -u neil
shared/Exalon/Aandeelhouders the following output is produced:
..
doveadm(neil): Panic: file mbox-storage.c: line 711
On 10.6.2013, at 14.56, W. de Hoog wdeh...@exalondelft.nl wrote:
We store our mail archive in a tree of subfolders. I am trying to speed up
text searching on our mail archive but when running doveadm -D -v index -u
neil shared/Exalon/Aandeelhouders the following output is produced:
..
Timo,
thanks for your answer.
If i understand this correctly than it's not possible to work in primary
storage with uncompressed mdbox (because of better performance) and move
older Mails to alternate storage in compressed Format.
Am 19.05.2013 21:34, schrieb Timo Sirainen:
On Fri,
On Fri, 2013-05-17 at 15:59 +0200, Claus wrote:
Hi,
im wondering if it's possible to store old messages in a compressed
mdbox on alternate storage.
The main storage is uncompressed mdbox.
I tried something like: doveadm -Dv -o plugin/zlib_save=gz altmove -u
testuser sentbefore 8d
Hi,
im wondering if it's possible to store old messages in a compressed
mdbox on alternate storage.
The main storage is uncompressed mdbox.
I tried something like: doveadm -Dv -o plugin/zlib_save=gz altmove -u
testuser sentbefore 8d
Could someone tell me if it's possible and give me a hint
On 25.4.2013, at 11.51, Oli Schacher dove...@lists.wgwh.ch wrote:
# 2.2.1 (83d83f55e5c2+) / dsync replicated setup
I just noticed that 'doveadm search' apparently tries to replicate
mailboxes and spits out errors if a mailbox in the search query is not
found:
#doveadm search -u
On Mon, 6 May 2013 17:30:51 +0300
Timo Sirainen t...@iki.fi wrote:
Not related to replication, but yeah, probably better to just ignore
nonexistent mailboxes. Changed in hg.
ah, sorry, I thought Syncing mailbox meant dsync.
Anyway, thanks for the fix!
--
message transmitted on 100%
Hi
# 2.2.1 (83d83f55e5c2+) / dsync replicated setup
I just noticed that 'doveadm search' apparently tries to replicate
mailboxes and spits out errors if a mailbox in the search query is not
found:
#doveadm search -u u...@example.com mailbox Spamreport
doveadm(u...@example.com): Error: Syncing
On 2.4.2013, at 15.37, Lutz Preßler lutz.press...@sernet.de wrote:
Only user1.test and user1.test.test2 have ACLs that allow testuser to access
them.
host:~# doveadm mailbox status -u testuser all INBOX.shared.user1.privat
INBOX.shared.user1.privat messages=37 recent=0 uidnext=70
Hello Timo,
On Thu, 04 Apr 2013, Timo Sirainen wrote:
On 2.4.2013, at 15.37, Lutz Preßler lutz.press...@sernet.de wrote:
Only user1.test and user1.test.test2 have ACLs that allow testuser to access
them.
host:~# doveadm mailbox status -u testuser all INBOX.shared.user1.privat
On 5.4.2013, at 0.48, Lutz Preßler lutz.press...@sernet.de wrote:
Only user1.test and user1.test.test2 have ACLs that allow testuser to access
them.
host:~# doveadm mailbox status -u testuser all INBOX.shared.user1.privat
INBOX.shared.user1.privat messages=37 recent=0 uidnext=70
Hello,
2.2.0rc3:
host:~# doveadm mailbox list -u testuser
INBOX
INBOX.test
INBOX.bla
INBOX.bla.blubb
INBOX.shared
INBOX.virtual
INBOX.shared.user1
INBOX.shared.user1.privat
INBOX.shared.user1.test
INBOX.shared.user1.test.test2
INBOX.shared.user1.Trash
INBOX.shared.user1.in2009
[... all mailboxes
On Mon, 2012-09-24 at 23:24 +0200, Daniel Parthey wrote:
Timo Sirainen wrote:
doveadm multi [-A | -u wildcards] separator string comand 1
[separator string command 2 [...]]
..
Ok, so how about batch?
It reads a series of commands and collects them into
one batch job which is then
Hi,
I want to write some php code that users can change there dovecot
password via a roundcube plugin. I'm using php function crypt(...) to
generate the hashes and everything works well so far.
I'm using doveadm pw to generate testhashes e.g.:
srv:~ # doveadm pw -r 5 -s BLF-CRYPT -p abc
On 3/11/2013 12:20 PM, Thomas Pries wrote:
Hi,
I want to write some php code that users can change there dovecot
password via a roundcube plugin. I'm using php function crypt(...) to
generate the hashes and everything works well so far.
I'm using doveadm pw to generate testhashes e.g.:
srv:~
On 03/11/2013 08:20 PM Thomas Pries wrote:
Hi,
I want to write some php code that users can change there dovecot
password via a roundcube plugin. I'm using php function crypt(...) to
generate the hashes and everything works well so far.
I'm using doveadm pw to generate testhashes
Hi,
On 11.03.2013 22:41, Pascal Volk wrote:
On 03/11/2013 08:20 PM Thomas Pries wrote:
I expected an ok ...
Usage would be:
doveadm pw -t
'{BLF-CRYPT}$2a$05$W82/Vw4ZEcHBC00M8cNwe.g8fOHuAeV7L5Q/q4W6VWl9V5kjoiz8y'
Your shell expands $2a and $05$W8… to empty strings
Thanks, sometimes
On Feb 25, 2013, at 01.45, Timo Sirainen t...@iki.fi wrote:
On 25.2.2013, at 4.50, b...@bitrate.net wrote:
i'm running doveadm search:
doveadm search -A mailbox sent savedbefore 365d
and it's returning no results.
a similar command does return some results:
doveadm search -A
i'm running doveadm search:
doveadm search -A mailbox sent savedbefore 365d
and it's returning no results.
a similar command does return some results:
doveadm search -A mailbox sent savedbefore 120d | grep -iF 'jdoe'
jdoe 7b9a8b0b7d37504fe72c55e4fe9a 65
jdoe
On 25.2.2013, at 4.50, b...@bitrate.net wrote:
i'm running doveadm search:
doveadm search -A mailbox sent savedbefore 365d
and it's returning no results.
a similar command does return some results:
doveadm search -A mailbox sent savedbefore 120d | grep -iF 'jdoe'
jdoe
* Timo Sirainen t...@iki.fi 2013.02.22 14:35:
$ doveadm user foo
$ echo $?
67
Fixed: http://hg.dovecot.org/dovecot-2.2/rev/bf817bc963f7
Looks good now. Thanks.
signature.asc
Description: Digital signature
Hi Timo,
just running into problems with
doveadm -D quota get -u user
doveadm(root): Debug: Loading modules from directory:
/usr/lib/dovecot/modules
doveadm(root): Debug: Module loaded:
/usr/lib/dovecot/modules/lib01_acl_plugin.so
doveadm(root): Debug: Module loaded:
Hi Robert,
Robert Schetterer wrote:
dovecot --version
2.1.12 (abcc9959b757)
just running into problems with
doveadm -D quota get -u user
doveadm(root): Fatal: Unknown command 'quota', but plugin quota exists.
Try to set mail_plugins=quota
should mail_plugins=quota really be set ?
Am 16.02.2013 17:27, schrieb Daniel Parthey:
Hi Robert,
Robert Schetterer wrote:
dovecot --version
2.1.12 (abcc9959b757)
just running into problems with
doveadm -D quota get -u user
doveadm(root): Fatal: Unknown command 'quota', but plugin quota exists.
Try to set mail_plugins=quota
This seems to be happening only when using the pop3c plugin. Any advice?
root@imap01:/etc/dovecot# doveadm -D -o imapc_user=chat_l...@xx.com
-o 'imapc_password=***' -o pop3c_user=chat_l...@xx.com -o
'pop3c_password=*' backup -u chat_l...@xx.com -R imapc:
doveadm(root
On 01/28/2013 11:55 PM, Gedalya wrote:
This seems to be happening only when using the pop3c plugin.
I meant the pop3_migration plugin.
I use 'doveadm user' in some scripts and the exit codes are fine for my
purposes. During tests it transpired that Dovecot 2.1 would give an error
message when querying for non-existent users. Dovecot 2.2 just exits without a
word. Not sure this is intended behaviour:
$ doveadm user foo
$ echo
On Wed, 2012-11-28 at 10:42 +0100, Steffen Kaiser wrote:
On Tue, 27 Nov 2012, Timo Sirainen wrote:
Just to let you know: I'm planning on releasing v2.1.11 today/tomorrow.
If you wish to get something fixed for it, ask quickly. :)
doveadm acl recalc -u user
to update ACL backend
Am 04.01.2013 um 04:30 schrieb Timo Sirainen t...@iki.fi:
http://hg.dovecot.org/dovecot-2.1/rev/721aba9128b9
I'll pull it to v2.2 among other changes today/tomorrow.
Thanks. This makes me wonder what concept will be used for replicating/backing
up ACLs going forward? Ideally those should
On Fri, 2013-01-04 at 12:19 +0100, Thomas Leuxner wrote:
Am 04.01.2013 um 04:30 schrieb Timo Sirainen t...@iki.fi:
http://hg.dovecot.org/dovecot-2.1/rev/721aba9128b9
I'll pull it to v2.2 among other changes today/tomorrow.
Thanks. This makes me wonder what concept will be used for
Am 04.01.2013 um 22:38 schrieb Timo Sirainen t...@iki.fi:
Yeah.. I guess dsync will need to handle them. I've thought about this
for a few years and always thought hopefully I won't need to implement
that soon. :)
One of the steps surely beneficial to this would be implementing single file
On 5.1.2013, at 0.50, Thomas Leuxner t...@leuxner.net wrote:
Am 04.01.2013 um 22:38 schrieb Timo Sirainen t...@iki.fi:
Yeah.. I guess dsync will need to handle them. I've thought about this
for a few years and always thought hopefully I won't need to implement
that soon. :)
One of the
On 2.1.2013, at 13.41, Thomas Leuxner t...@leuxner.net wrote:
when trying to backup mailboxes I noticed some hiccups when the ACL plugin is
enabled. It works fine with ACL disabled:
$ doveadm -o plugin/quota= backup -u t...@leuxner.net
mdbox:/home/backups/tlx/mdbox
However, enabled
Hi,
when trying to backup mailboxes I noticed some hiccups when the ACL plugin is
enabled. It works fine with ACL disabled:
$ doveadm -o plugin/quota= backup -u t...@leuxner.net
mdbox:/home/backups/tlx/mdbox
However, enabled (and w/ a mailbox actually using ACLs) the following error
occurs:
Timo Sirainen t...@iki.fi writes:
On Tue, 2012-12-11 at 23:15 +0100, Kamil Jońca wrote:
#0 0x7f99d591fe6f in mail_storage_try_copy (mail=0x198dbb0,
_ctx=0x7fff8914fc28) at mail-copy.c:56
56 mail-copy.c: No such file or directory.
raw-storage's envelope_sender is NULL. Fixed Dovecot
I have simple old message:
--8---cut here---start-8---
X-Mozilla-Status: 0011
X-Mozilla-Status2:
Date: Wed, 26 Jan 2000 13:38:41 +0100
From: Kamil Jonca kjonca@localhost.localdomain
To: Somebody X x...@tiger.com.pl
Subject: Re: Opisy
Message-ID:
On 12/11/2012 11:18 AM Kamil Jońca wrote:
When I try to
dovecot-lda message.txt
(for sieve refiltering) I got segmentation fault.
Does it is bug in lda, or message does not keep standards?
KJ
I've saved your example message and delivered it twice (Dovecot 2.1.11
and 2.0.21). I'm
Pascal Volk user+dove...@localhost.localdomain.org writes:
On 12/11/2012 11:18 AM Kamil Jońca wrote:
When I try to
dovecot-lda message.txt
(for sieve refiltering) I got segmentation fault.
Does it is bug in lda, or message does not keep standards?
KJ
I've saved your example message
1 - 100 of 469 matches
Mail list logo