On Thu, 15 Apr 2010 19:23:25 -0700 (PDT), Bill Dzurilla wrote:
>Anyone know where to find a soft start for the L-7? Jeff at Harbach told me
>his L-4B soft start does not work on the L-7
I don't know why not, the L-7 and the L-4B are, for most practical purposes,
virtually identical. Is it a phy
Perhaps the transformer screws are loose and when you turn it upside down
the chassis no longer vibrates in sympathy with the transformer.
Dennis AE6C
On Wed, Apr 14, 2010 at 3:49 PM, Garey Barrell wrote:
> Probably a bad solder joint on the filter cap.
>
> 73, Garey - K4OAH
> Glen Allen, VA
>
Anyone know where to find a soft start for the L-7? Jeff at Harbach told me his
L-4B soft start does not work on the L-7, and his universal soft start does not
work on either the L-7 or the L-4B.
73, Bill NZ5N
___
Drakelist mailing list
Drake
Fred -
This only occurs when transceiving with receiver control, and is a
result of the loading of the cable used for the INJ connection. The
lower the capacitance of this cable, the less variation in peaking the
Preselector. The effect can also be minimized by doing the INJ
alignment with
I use the spot position on the Transmitter and tune for max on the
receiver s meter. Preselectors first and main tuning knob on Transmitter
second.
Plate next and load control at 3.5 for 80 meters and 4.5 on 40 meters and
higher freq.
I noticed that I get an additional 20 to 30 watts output
5 matches
Mail list logo