___
Drakelist mailing list
Drakelist@zerobeat.net
http://mailman.zerobeat.net/mailman/listinfo/drakelist
_richfb...@sbcglobal.net_ (mailto:richfb...@sbcglobal.net) writes:
Thoughts, suggestions? Thanks for all advice offered. 73 W5BXE
Rich, I went through that on an MN4c yes it was the diodes both were
bleeding backwards when out of circuit and tested.
The ones they use in all of the units wer
I have a MN2700 that is no longer reading correct forward or reflected
power. It also is not reflecting the correct output power.
These tests have been done using a DL300 dummy load and a TR7.
I've tested using another trusted device, a MN-2000, which shows correct
readings for SWR and out
Richard,
I would suggest a shorted RCA plug in the mute jack on the back so all
positions of the FUNCTION switch will work giving you the NB and CAL
positions you might need. No other connections that I can think of are
needed at all.
73,
Don, WB5HAK
__
On Oct 28, 2010, at 9:11 PM, Bob Jackson wrote:
For an SPR-4, I'm looking for:
• 5-NB noise blanker
• SCC-4 Crystal Calib.
Failing that, does anyone know if there's PCBs available to HB my own?
I have not actually done it, but I bought a $10 crystal calibrator
from eBay with
For an SPR-4, I'm looking for:
a.. 5-NB noise blanker
b.. SCC-4 Crystal Calib.
Failing that, does anyone know if there's PCBs available to HB my own?
a.. Also looking for a roll of decals for the preselector dial.
Any help much appreciated.
Thanks and 73 to all,
Bob AG5X__
The manual for the R-4C apparently does not address the use of the receiver
without connecting it to another Drake transmitter. Obviously the antenna
and speaker jacks need to be connected but which other jacks need to be
shorted (or not) to make the receiver work. I do not want to experiment
w
HI Dick...
Well, having more voltage to the fan can't hurt. Seems ironic that the fan
slows down just when you need it most ;-).
Tom Holmes, N8ZM
Tipp City, OH
EM79
> -Original Message-
> From: Dick KF4NS [mailto:kf4nsra...@verizon.net]
> Sent: Wednesday, October 27, 2010 4:15 PM
> To:
8 matches
Mail list logo