On Tue, 27 Nov 2012 23:11:14 -0500, Chuck Grandgent wrote:
>sorry to add to the wasted bandwidth, but it is likely that this is automated
>spam.
I don't think so. He responded via direct to my post, and the header trail
checks out. It does not appear to be spoofed, at least.
73
-Jim
NU0C
--
sorry to add to the wasted bandwidth, but it is likely that this is
automated spam.
Chuck, K1OM
On Tue, Nov 27, 2012 at 11:00 PM, Jim Shorney wrote:
> On Tue, 27 Nov 2012 19:37:37 -0800, centi...@nym.hush.com wrote:
>
> >Yikes!?!?!
>
>
> It is STILL the last link at the end of every message.
On Tue, 27 Nov 2012 18:27:34 -0500 (EST), K9sqg wrote:
>Is the issue of frequency accuracy, plus stability, not a consideration when
>attempting 60 meter operation with a 4-line?
Perhaps, but maybe less so than the in-band spurs.
73
-Jim
NU0C
--
Theres something out of place lets go and
On Tue, 27 Nov 2012 19:37:37 -0800, centi...@nym.hush.com wrote:
>Yikes!?!?!
It is STILL the last link at the end of every message.
___
Drakelist mailing list
Drakelist@zerobeat.net
http://mailman.zerobeat.net/mailman/listinfo/drakelist
Yikes!?!?!
On Tuesday, November 27, 2012 at 10:09 AM, "Mike Bryce" wrote:There
wouldn't be much too it.
all you need would be a hand full of resistors, using ohm's law to
calculate the values. The values would be calculated at the max
current the TRx series would draw.
On would need to load th
Is the issue of frequency accuracy, plus stability, not a consideration when
attempting 60 meter operation with a 4-line? Changing PTO frequency would
still result in one having to deal with accuracy and stability issues which,
for channelized operation, are more critical. Just some random tho
Like another Gary pointed out, the IF is in the way.
It will work to use a 16.1MHz crystal. You will get images and spurs though.
If you are lucky (I haven't run the numbers) they are far enough from the
60m channels to let you RECEIVE them... BUT do not try to TRANSMIT,
you will put out spurs th
The T-4X IF frequency is 5645 khz, that’s why the manual states not to use the
frequencies 5 to 6 mhz.
73, Gary ___
Drakelist mailing list
Drakelist@zerobeat.net
http://mailman.zerobeat.net/mailman/listinfo/drakelist
Hi folks,
I have scanned the article, one small page, written by K0ZQD in V2 Iss.
16 of The Collins Coll's. MMag. It gives the schematic, leaving
construction details to the builder. I also have scanned a skem of the
p.s. pinouts for the 516F-2, from the same issue. Make your own
adapter(s
There wouldn't be much too it.
all you need would be a hand full of resistors, using ohm's law to calculate
the values. The values would be calculated at the max current the TRx series
would draw.
On would need to load the 6.3 v filament down to the same current as the tubes,
if you don't the
I see that a 16.1 MHz crystal would cover 5.0 to 5.5 MHz if it can work
at all. With the 60 meter channels ranging from 5.3305 to 5.4035 MHz, I
wonder if at least receiving might be possible?
73 de W3NU
On 11/25/2012 1128, Edward Gable wrote:
Hello Bob: If you look at any of the 4 line man
I would be very interested in seeing the schematic..
73
Gene K1NR
PS I would not mind having one to check my Collins supply
either : - )
On Mon, 26 Nov 2012 11:50:11 -0500
Al Parker wrote:
> hi folks,
> Some yrs ago there was an article on building a test
> setup for Collins p.s.'s.
12 matches
Mail list logo
