I sold the RCS 4 switches. Thank you.
Rick
W0RT___
Drakelist mailing list
Drakelist@zerobeat.net
http://mailman.zerobeat.net/mailman/listinfo/drakelist
I have two Drake RCS-4 switch units and three control heads for sale. One
was originally purchased by me in the late 70's and may have a bad component in
the control head. One control head and switch checked out okay a few years ago
but I am selling all "as is". I used the one I bought for
t. Drake gear is pretty rugged as you know so it should be
amenable to being serviced and cleaned. Let me know if you get it
going.
Rick
W0RT
- Original Message - From: "Loren McCullough"
To: "Richard Tucker" ; "drakelist"
Sent: Sunday, August 07, 2
hard Tucker" ; "drakelist"
Sent: Sunday, August 07, 2011 2:09 PM
Subject: Re: [Drakelist] RCS-4
Finally got the switch box apart. Have to replace all the external screws. even with
penetrating oil I was only able to remove one without snapping the head off, or having to grind
know if you get it going.
Rick
W0RT
- Original Message - From: "Loren McCullough"
To: "Richard Tucker" ; "drakelist"
Sent: Sunday, August 07, 2011 2:09 PM
Subject: Re: [Drakelist] RCS-4
Finally got the switch box apart. Have to replace all the external
Always use lock washers under those nylon insert nuts. I have seen many
come loose over the years.
73,
John, W4AWM
In a message dated 8/7/2011 3:38:49 P.M. Eastern Daylight Time,
k9...@aol.com writes:
I've found that any antenna, tower, rotor, etc. device used outdoors can
bene
dware.
-Original Message-
From: Loren McCullough
To: Richard Tucker ; drakelist
Sent: Sun, Aug 7, 2011 11:11 am
Subject: Re: [Drakelist] RCS-4
Finally got the switch box apart. Have to replace all the external
screws. even with penetrating oil I was only able to remove one without
sna
and worked fine and is still working. Be
careful of the phenolic board the strips are made out of, it can be
brittle.
Rick
W0RT
- Original Message - From: "Loren McCullough"
To: "Richard Tucker"
Cc: "drakelist"
Sent: Wednesday, August 03, 2011 6:48 AM
- Original Message -
From: "Steve Berg"
To:
Sent: Wednesday, August 03, 2011 8:13 AM
Subject: Re: [Drakelist] RCS-4
Loren, the best penetrating oil I have ever found is
Kroil. You can generally get it at sporting goods stores,
such as Midway USA. I have used it succes
t and have worked on it a bit.
Do you have specific questions?
Rick Tucker
W0RT
- Original Message - From: "Loren McCullough"
To: "drakelist"
Sent: Sunday, July 31, 2011 2:57 PM
Subject: [Drakelist] RCS-4
Anyone have any experience or insight into resurrecting an RCS
amfest and have worked on it a
bit. Do you have specific questions?
Rick Tucker
W0RT
- Original Message - From: "Loren McCullough"
To: "drakelist"
Sent: Sunday, July 31, 2011 2:57 PM
Subject: [Drakelist] RCS-4
Anyone have any experience or insight into resurrectin
quot;
Sent: Sunday, July 31, 2011 2:57 PM
Subject: [Drakelist] RCS-4
Anyone have any experience or insight into resurrecting an RCS-4. I
haven't really looked at either piece yet. The control head has been
sitting in my attic for abt 20 years and the remote antenna switch has
been s
Anyone have any experience or insight into resurrecting an RCS-4. I
haven't really looked at either piece yet. The control head has been
sitting in my attic for abt 20 years and the remote antenna switch has
been sitting outside in the elements.
Off subject, I also have a Ham-II/CD44 rotor a
I, too, have had one in use for years - the wireless type. The external
unit was sealed with the silicon caulking used ariund tubs. Never a
problem. They are really nice gems. I'd like a two position one if anyone
has one.
Kris KM2KM
Merschrod
123 Warren Road
Ithaca, NY 14850
www.merschro
om it. I think
the transformer may have burned out in my original. It is slow in extremely
cold wx but still works fine.
Rick Tucker
W0RT
Kansas
- Original Message -
From: "Mark Nace"
To:
Sent: Tuesday, May 17, 2011 6:40 PM
Subject: [Drakelist] RCS-4 External Antenna Switch
Hello everyone,
I just acquired an RCS-4 antenna switch that works. Does anyone have any
advice
on whether I need to lube the drive motor, and if so, what to use, and how to
do
it? Any other advice on other items I should be concerned about?
Thanks and 73
Mark
N5KAE
FREE! Stick-on label, numbered 1 thru 5, to show position of coax switch.
Sold the switch - still have the label.
Reply off list.
Joe k7mks ___
Drakelist mailing list
Drakelist@zerobeat.net
http://mailman.zerobeat.net/mailman/listinfo/drakelist
17 matches
Mail list logo