David Chris Drake [EMAIL PROTECTED] made an utterance to the drakelist
gang
--
Garey,
Thanks for the link. My current TR7 has the first gen. board. Its mid
5900's, so your cutoff must be about right. I've 'heard' people
Carel PA0CMU [EMAIL PROTECTED] made an utterance to the drakelist gang
--
Garey,
Not only the demodulator circuit was changed.
1. Drake made some minor changes in the S-meter circuit. R1101 is replaced by
two 1N4148 diodes
[EMAIL PROTECTED] made an utterance to the drakelist gang
--
Where can I find/purchase a replacement cartridge/element for this
microphone?
Tnx de Ed,
VE-3-FTO
Hi All
The vox relay for my TR-7A, L7, T-4XC and L-4B requires a 2 pin connector. Can
someone tell me where I can buy four of them or two cables with one at each end?
Thanks,
George Bennett, K1GMB
[EMAIL PROTECTED] made an utterance to the drakelist gang
--
There is an eBay seller who periodically advertises them - or contact
Astatic. The Drake 7077 is the same as their 1104(c) and 878(dm) series
of mics with regards to
[EMAIL PROTECTED] made an utterance to the drakelist gang
--
Thanks.
I have looked on the web for Astatic, but any site that comes up does not
have contact info. Can you help further?
Ed,
VE-3-FTO
From: [EMAIL PROTECTED]
[EMAIL PROTECTED] made an utterance to the drakelist gang
--
That particular connector can be obtained on Upay, I mean eBay, for $25-47 or
so.**Need a new ride? Check out the largest site for U.S. used
car listings
Garey Barrell [EMAIL PROTECTED] made an utterance to the drakelist gang
--
Carel -
First, thank you very much for your informative website.
We seem to have once again run across Drake's penchant for hardware that
doesn't
Does anyone have a pic?
Gary H. Harmon, Jr. / K5JWK
6003 Archwood
San Antonio, TX 78239-1504
210.884.6926
Retirement means everyday is a Saturday except Sunday.
_
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
Behalf Of [EMAIL PROTECTED]
Sent: Friday, April 25, 2008 8:17 PM
Garey Barrell [EMAIL PROTECTED] made an utterance to the drakelist gang
--
George -
This connector has been obsolete since slightly before Drake specified
it!! Or at least it seems that way.
You have a several options.
1.
Garey Barrell [EMAIL PROTECTED] made an utterance to the drakelist gang
--
Or if your fabrication skills aren't up to making an adapter
plate... Here's a real one. Still cheaper than the E* connectors
Ariel M. Elam [EMAIL PROTECTED] made an utterance to the drakelist gang
--
Some years ago I made a connector using #10 awg THHN solid wire. Take a
short length and slide the insulation off. Set it aside for later use.
Cut the
12 matches
Mail list logo