On Wed, Jan 08, 2014 at 09:32:58PM +, Russell King - ARM Linux wrote:
> On Tue, Jan 07, 2014 at 04:59:35PM +0800, Shawn Guo wrote:
> > On Thu, Jan 02, 2014 at 09:28:03PM +, Russell King wrote:
> > > diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
> > > b/arch/arm/boot/dts/imx6qdl-sabre
On Thu, Jan 09, 2014 at 11:25:38PM +0800, Shawn Guo wrote:
> Yea, adding all four into imx-drm crtcs works for imx6q, but it doesn't
> for imx6dl, because &ipu2 is unavailable for imx6dl at all.
>
> Here is how I get around it.
Thanks, I've rolled your change into this commit now.
--
FTTC broad
On Tue, Jan 07, 2014 at 05:29:55PM +0100, Philipp Zabel wrote:
> Thanky you. This is what I came up with so far:
>
> From: Philipp Zabel
> Subject: [PATCH 1/2] staging: imx-hdmi: use RX_SENSE0 for plug detection if
> HPD is unreliable
>
> On some boards HPD might not reliably detect DVI monitor
On Tue, Jan 07, 2014 at 04:59:35PM +0800, Shawn Guo wrote:
> On Thu, Jan 02, 2014 at 09:28:03PM +, Russell King wrote:
> > diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
> > b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
> > index e75e11b36dff..0e005f21d241 100644
> > --- a/arch/arm/boot/dts/im
Am Dienstag, den 07.01.2014, 08:30 -0700 schrieb Eric Nelson:
> Hi Philipp,
>
> On 01/07/2014 04:29 AM, Philipp Zabel wrote:
> > Am Montag, den 06.01.2014, 19:31 -0700 schrieb Eric Nelson:
> >> Hi Russell,
> >>
> >> On 01/06/2014 10:46 AM, Russell King - ARM Linux wrote:
> >>> On Mon, Jan 06, 2014
On Thu, Jan 02, 2014 at 09:28:03PM +, Russell King wrote:
> diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
> b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
> index e75e11b36dff..0e005f21d241 100644
> --- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
> +++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
> @
Am Montag, den 06.01.2014, 19:31 -0700 schrieb Eric Nelson:
> Hi Russell,
>
> On 01/06/2014 10:46 AM, Russell King - ARM Linux wrote:
> > On Mon, Jan 06, 2014 at 06:41:28PM +0100, Philipp Zabel wrote:
> >> Hi Eric,
> >>
> >> Am Freitag, den 03.01.2014, 12:14 -0700 schrieb Eric Nelson:
> >>> This i
Hi Philipp,
On 01/07/2014 04:29 AM, Philipp Zabel wrote:
> Am Montag, den 06.01.2014, 19:31 -0700 schrieb Eric Nelson:
>> Hi Russell,
>>
>> On 01/06/2014 10:46 AM, Russell King - ARM Linux wrote:
>>> On Mon, Jan 06, 2014 at 06:41:28PM +0100, Philipp Zabel wrote:
Hi Eric,
Am Freitag,
Hi Russell,
On 01/06/2014 10:46 AM, Russell King - ARM Linux wrote:
> On Mon, Jan 06, 2014 at 06:41:28PM +0100, Philipp Zabel wrote:
>> Hi Eric,
>>
>> Am Freitag, den 03.01.2014, 12:14 -0700 schrieb Eric Nelson:
>>> This is an issue we've seen before. The SABRE Lite board has
>>> a voltage divider
Hi Eric,
Am Freitag, den 03.01.2014, 12:14 -0700 schrieb Eric Nelson:
> This is an issue we've seen before. The SABRE Lite board has
> a voltage divider on the HPD pins and some monitors (esp. DVI
> monitors) either don't drive things high enough to assert HPD or
> bounce with connect/disconnect.
On Mon, Jan 06, 2014 at 06:41:28PM +0100, Philipp Zabel wrote:
> Hi Eric,
>
> Am Freitag, den 03.01.2014, 12:14 -0700 schrieb Eric Nelson:
> > This is an issue we've seen before. The SABRE Lite board has
> > a voltage divider on the HPD pins and some monitors (esp. DVI
> > monitors) either don't d
Am Freitag, den 03.01.2014, 17:07 + schrieb Russell King - ARM
Linux:
> On Fri, Jan 03, 2014 at 05:48:57PM +0100, Philipp Zabel wrote:
> > Hi Russell,
> >
> > I've tested this series on a BD-SL (SabreLite) with HDMI. Right now
> > the HPD signal doesn't seem to work, but after overwriting the
Hi Russell,
I've tested this series on a BD-SL (SabreLite) with HDMI. Right now
the HPD signal doesn't seem to work, but after overwriting the
connection check, I got a stable and correct picture on the monitor:
arch/arm/boot/dts/imx6q-sabrelite.dts | 22 ++
1 file changed, 2
On Fri, Jan 03, 2014 at 06:26:44PM +0100, Philipp Zabel wrote:
> Am Freitag, den 03.01.2014, 17:07 + schrieb Russell King - ARM
> Linux:
> > On Fri, Jan 03, 2014 at 05:48:57PM +0100, Philipp Zabel wrote:
> > > Hi Russell,
> > >
> > > I've tested this series on a BD-SL (SabreLite) with HDMI. Ri
On Fri, Jan 03, 2014 at 05:48:57PM +0100, Philipp Zabel wrote:
> Hi Russell,
>
> I've tested this series on a BD-SL (SabreLite) with HDMI. Right now
> the HPD signal doesn't seem to work, but after overwriting the
> connection check, I got a stable and correct picture on the monitor:
Hmm. Does t
Hi Philipp,
On 01/03/2014 10:26 AM, Philipp Zabel wrote:
> Am Freitag, den 03.01.2014, 17:07 + schrieb Russell King - ARM
> Linux:
>> On Fri, Jan 03, 2014 at 05:48:57PM +0100, Philipp Zabel wrote:
>>> Hi Russell,
>>>
>>> I've tested this series on a BD-SL (SabreLite) with HDMI. Right now
>>> t
Use the componentised device support for imx-drm. This requires all
the sub-components and the master device to register with the component
device support.
Signed-off-by: Russell King
---
arch/arm/boot/dts/imx51-babbage.dts| 10 ++-
arch/arm/boot/dts/imx53-m53evk.dts |8 ++
17 matches
Mail list logo