The Single-ended eCBUS Mode (eCBUS-S) mode provides 60 Mb/s full-duplex
bidirectional traffic for three channels:
- CBUS data (CBUS1 channel),
- High-bandwidth MHL data (eMSC channel),
- tunneling data (T-CBUS channel).
It is required to fully support MHL3 dongles.
Signed-off-by: Andrzej Hajda <a.ha...@samsung.com>
---
drivers/gpu/drm/bridge/sil-sii8620.c | 104 ++++++++++++++++++++++++++++++++++-
drivers/gpu/drm/bridge/sil-sii8620.h | 5 ++
2 files changed, 107 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/bridge/sil-sii8620.c
b/drivers/gpu/drm/bridge/sil-sii8620.c
index cde0074..0d3716f 100644
--- a/drivers/gpu/drm/bridge/sil-sii8620.c
+++ b/drivers/gpu/drm/bridge/sil-sii8620.c
@@ -104,6 +104,7 @@ static void sii8620_fetch_edid(struct sii8620 *ctx);
static void sii8620_set_upstream_edid(struct sii8620 *ctx);
static void sii8620_enable_hpd(struct sii8620 *ctx);
static void sii8620_mhl_disconnected(struct sii8620 *ctx);
+static void sii8620_disconnect(struct sii8620 *ctx);
static int sii8620_clear_error(struct sii8620 *ctx)
{
@@ -1016,13 +1017,44 @@ static void sii8620_mhl_init(struct sii8620 *ctx)
sii8620_mt_set_int(ctx, MHL_INT_REG(RCHANGE), MHL_INT_RC_DCAP_CHG);
}
+static void sii8620_emsc_enable(struct sii8620 *ctx)
+{
+ u8 reg;
+
+ sii8620_setbits(ctx, REG_GENCTL, BIT_GENCTL_EMSC_EN
+ | BIT_GENCTL_CLR_EMSC_RFIFO
+ | BIT_GENCTL_CLR_EMSC_XFIFO, ~0);
+ sii8620_setbits(ctx, REG_GENCTL, BIT_GENCTL_CLR_EMSC_RFIFO
+ | BIT_GENCTL_CLR_EMSC_XFIFO, 0);
+ sii8620_setbits(ctx, REG_COMMECNT, BIT_COMMECNT_I2C_TO_EMSC_EN, ~0);
+ reg = sii8620_readb(ctx, REG_EMSCINTR);
+ sii8620_write(ctx, REG_EMSCINTR, reg);
+ sii8620_write(ctx, REG_EMSCINTRMASK, BIT_EMSCINTR_SPI_DVLD);
+}
+
+static int sii8620_wait_for_fsm_state(struct sii8620 *ctx, u8 state)
+{
+ int i;
+
+ for (i = 0; i < 10; ++i) {
+ u8 s = sii8620_readb(ctx, REG_COC_STAT_0);
+
+ if ((s & MSK_COC_STAT_0_FSM_STATE) == state)
+ return 0;
+ if (!(s & BIT_COC_STAT_0_PLL_LOCKED))
+ return -EBUSY;
+ usleep_range(4000, 6000);
+ }
+ return -ETIMEDOUT;
+}
+
static void sii8620_set_mode(struct sii8620 *ctx, enum sii8620_mode mode)
{
+ int ret;
+
if (ctx->mode == mode)
return;
- ctx->mode = mode;
-
switch (mode) {
case CM_MHL1:
sii8620_write_seq_static(ctx,
@@ -1032,11 +1064,46 @@ static void sii8620_set_mode(struct sii8620 *ctx, enum
sii8620_mode mode)
| BIT_DPD_OSC_EN,
REG_COC_INTR_MASK, 0
);
+ ctx->mode = mode;
break;
case CM_MHL3:
sii8620_write(ctx, REG_M3_CTRL, VAL_M3_CTRL_MHL3_VALUE);
+ ctx->mode = mode;
+ return;
+ case CM_ECBUS_S:
+ sii8620_emsc_enable(ctx);
+ sii8620_write_seq_static(ctx,
+ REG_TTXSPINUMS, 4,
+ REG_TRXSPINUMS, 4,
+ REG_TTXHSICNUMS, 0x14,
+ REG_TRXHSICNUMS, 0x14,
+ REG_TTXTOTNUMS, 0x18,
+ REG_TRXTOTNUMS, 0x18,
+ REG_PWD_SRST, BIT_PWD_SRST_COC_DOC_RST
+ | BIT_PWD_SRST_CBUS_RST_SW_EN,
+ REG_MHL_COC_CTL1, 0xbd,
+ REG_PWD_SRST, BIT_PWD_SRST_CBUS_RST_SW_EN,
+ REG_COC_CTLB, 0x01,
+ REG_COC_CTL0, 0x5c,
+ REG_COC_CTL14, 0x03,
+ REG_COC_CTL15, 0x80,
+ REG_MHL_DP_CTL6, BIT_MHL_DP_CTL6_DP_TAP1_SGN
+ | BIT_MHL_DP_CTL6_DP_TAP1_EN
+ | BIT_MHL_DP_CTL6_DT_PREDRV_FEEDCAP_EN,
+ REG_MHL_DP_CTL8, 0x03
+ );
+ ret = sii8620_wait_for_fsm_state(ctx, 0x03);
+ sii8620_write_seq_static(ctx,
+ REG_COC_CTL14, 0x00,
+ REG_COC_CTL15, 0x80
+ );
+ if (!ret)
+ sii8620_write(ctx, REG_CBUS3_CNVT, 0x85);
+ else
+ sii8620_disconnect(ctx);
return;
case CM_DISCONNECTED:
+ ctx->mode = mode;
break;
default:
dev_err(ctx->dev, "%s mode %d not supported\n", __func__, mode);
@@ -1229,12 +1296,45 @@ static void sii8620_msc_mr_write_stat(struct sii8620
*ctx)
sii8620_status_changed_path(ctx);
}
+static void sii8620_ecbus_up(struct sii8620 *ctx, int ret)
+{
+ if (ret < 0)
+ return;
+
+ sii8620_set_mode(ctx, CM_ECBUS_S);
+}
+
+static void sii8620_got_ecbus_speed(struct sii8620 *ctx, int ret)
+{
+ if (ret < 0)
+ return;
+
+ sii8620_mt_write_stat(ctx, MHL_XDS_REG(CURR_ECBUS_MODE),
+ MHL_XDS_ECBUS_S | MHL_XDS_SLOT_MODE_8BIT);
+ sii8620_mt_rap(ctx, MHL_RAP_CBUS_MODE_UP);
+ sii8620_mt_set_cont(ctx, sii8620_ecbus_up);
+}
+
static void sii8620_msc_mr_set_int(struct sii8620 *ctx)
{
u8 ints[MHL_INT_SIZE];
sii8620_read_buf(ctx, REG_MHL_INT_0, ints, MHL_INT_SIZE);
sii8620_write_buf(ctx, REG_MHL_INT_0, ints, MHL_INT_SIZE);
+
+ if (ints[MHL_INT_RCHANGE] & MHL_INT_RC_DCAP_CHG) {
+ switch (ctx->mode) {
+ case CM_MHL3:
+ sii8620_mt_read_xdevcap_reg(ctx, MHL_XDC_ECBUS_SPEEDS);
+ sii8620_mt_set_cont(ctx, sii8620_got_ecbus_speed);
+ break;
+ case CM_ECBUS_S:
+ sii8620_mt_read_devcap(ctx, true);
+ break;
+ default:
+ break;
+ }
+ }
}
static struct sii8620_mt_msg *sii8620_msc_msg_first(struct sii8620 *ctx)
diff --git a/drivers/gpu/drm/bridge/sil-sii8620.h
b/drivers/gpu/drm/bridge/sil-sii8620.h
index 6ff616a..3ee4e7e 100644
--- a/drivers/gpu/drm/bridge/sil-sii8620.h
+++ b/drivers/gpu/drm/bridge/sil-sii8620.h
@@ -841,6 +841,8 @@
#define MSK_MHL_DP_CTL7_DT_DRV_VBIAS_CASCTL 0xf0
#define MSK_MHL_DP_CTL7_DT_DRV_IREF_CTL 0x0f
+#define REG_MHL_DP_CTL8 0x0352
+
/* Tx Zone Ctl1, default value: 0x00 */
#define REG_TX_ZONE_CTL1 0x0361
#define VAL_TX_ZONE_CTL1_TX_ZONE_CTRL_MODE 0x08
@@ -1088,6 +1090,9 @@
/* CoC Status, default value: 0x00 */
#define REG_COC_STAT_0 0x0700
+#define BIT_COC_STAT_0_PLL_LOCKED BIT(7)
+#define MSK_COC_STAT_0_FSM_STATE 0x0f
+
#define REG_COC_STAT_1 0x0701
#define REG_COC_STAT_2 0x0702
#define REG_COC_STAT_3 0x0703
--
2.7.4
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
