Adam Ford wrote:
> > > > >
> > > > > On Fri, Aug 5, 2022 at 5:55 AM Adam Ford wrote:
> > > > > >
> > > > > > On Fri, Aug 5, 2022 at 3:44 AM Biju Das
> > > > > > wrote:
> > > > > > >
> >
AM Adam Ford wrote:
> > > > >
> > > > > On Fri, Aug 5, 2022 at 3:44 AM Biju Das
> > > > > wrote:
> > > > > >
> > > > > > Hi Adam and all,
> > > > > >
> > >
3:44 AM Biju Das
> > > > wrote:
> > > > >
> > > > > Hi Adam and all,
> > > > >
> > > > > > Subject: Re: imx8mm lcdif->dsi->adv7535 no video, no errors
> > > > > >
> > > > >
> > > Hi Adam and all,
> > > >
> > > > > Subject: Re: imx8mm lcdif->dsi->adv7535 no video, no errors
> > > > >
> > > > > On Thu, Aug 4, 2022 at 9:52 AM Dave Stevenson
> > > > > wrote:
> > > > > >
On Fri, Aug 5, 2022 at 7:56 AM Adam Ford wrote:
>
> On Fri, Aug 5, 2022 at 5:55 AM Adam Ford wrote:
> >
> > On Fri, Aug 5, 2022 at 3:44 AM Biju Das wrote:
> > >
> > > Hi Adam and all,
> > >
> > > > Subject: Re: imx8mm lcdif->dsi->
On Fri, Aug 5, 2022 at 5:55 AM Adam Ford wrote:
>
> On Fri, Aug 5, 2022 at 3:44 AM Biju Das wrote:
> >
> > Hi Adam and all,
> >
> > > Subject: Re: imx8mm lcdif->dsi->adv7535 no video, no errors
> > >
> > > On Thu, Aug 4, 2022 at 9:52 AM D
On Fri, Aug 5, 2022 at 3:44 AM Biju Das wrote:
>
> Hi Adam and all,
>
> > Subject: Re: imx8mm lcdif->dsi->adv7535 no video, no errors
> >
> > On Thu, Aug 4, 2022 at 9:52 AM Dave Stevenson
> > wrote:
> > >
> > > On Thu, 4 Aug 2022 a
Hi Adam and all,
> Subject: Re: imx8mm lcdif->dsi->adv7535 no video, no errors
>
> On Thu, Aug 4, 2022 at 9:52 AM Dave Stevenson
> wrote:
> >
> > On Thu, 4 Aug 2022 at 13:51, Marco Felsch
> wrote:
> > >
> > > Hi Dave,
> > &g
On Thu, Aug 4, 2022 at 9:52 AM Dave Stevenson
wrote:
>
> On Thu, 4 Aug 2022 at 13:51, Marco Felsch wrote:
> >
> > Hi Dave,
> >
> > On 22-08-04, Dave Stevenson wrote:
> > > Hi Marco
> > >
> > > On Thu, 4 Aug 2022 at 10:38, Marco Felsch wrote:
> > > >
> > > > Hi Dave, Adam,
> > > >
> > > > On
On Thu, 4 Aug 2022 at 13:51, Marco Felsch wrote:
>
> Hi Dave,
>
> On 22-08-04, Dave Stevenson wrote:
> > Hi Marco
> >
> > On Thu, 4 Aug 2022 at 10:38, Marco Felsch wrote:
> > >
> > > Hi Dave, Adam,
> > >
> > > On 22-08-03, Dave Stevenson wrote:
> > > > Hi Adam
> > > >
> > > > On Wed, 3 Aug 2022
Hi Adam,
> Subject: Re: imx8mm lcdif->dsi->adv7535 no video, no errors
>
> On Thu, Aug 4, 2022 at 7:52 AM Marco Felsch
> wrote:
> >
> > Hi Dave,
> >
> > On 22-08-04, Dave Stevenson wrote:
> > > Hi Marco
> > >
> > > On Thu
Hi Adam,
On 22-08-04, Adam Ford wrote:
> On Thu, Aug 4, 2022 at 7:52 AM Marco Felsch wrote:
> >
> > Hi Dave,
> >
> > On 22-08-04, Dave Stevenson wrote:
> > > Hi Marco
> > >
> > > On Thu, 4 Aug 2022 at 10:38, Marco Felsch wrote:
> > > >
> > > > Hi Dave, Adam,
> > > >
> > > > On 22-08-03, Dave
Hi Dave,
On 22-08-04, Dave Stevenson wrote:
> Hi Marco
>
> On Thu, 4 Aug 2022 at 11:28, Marco Felsch wrote:
> >
> > On 22-08-03, Dave Stevenson wrote:
> > > On Wed, 3 Aug 2022 at 13:31, Adam Ford wrote:
> >
> > ...
> >
> > > > Mine also states the DSI source needs to provide correct video
On Thu, Aug 4, 2022 at 7:52 AM Marco Felsch wrote:
>
> Hi Dave,
>
> On 22-08-04, Dave Stevenson wrote:
> > Hi Marco
> >
> > On Thu, 4 Aug 2022 at 10:38, Marco Felsch wrote:
> > >
> > > Hi Dave, Adam,
> > >
> > > On 22-08-03, Dave Stevenson wrote:
> > > > Hi Adam
> > > >
> > > > On Wed, 3 Aug
Hi Dave,
On 22-08-04, Dave Stevenson wrote:
> Hi Marco
>
> On Thu, 4 Aug 2022 at 10:38, Marco Felsch wrote:
> >
> > Hi Dave, Adam,
> >
> > On 22-08-03, Dave Stevenson wrote:
> > > Hi Adam
> > >
> > > On Wed, 3 Aug 2022 at 12:03, Adam Ford wrote:
> >
> > ...
> >
> > > > > Did managed to get
Hi Marco
On Thu, 4 Aug 2022 at 11:28, Marco Felsch wrote:
>
> On 22-08-03, Dave Stevenson wrote:
> > On Wed, 3 Aug 2022 at 13:31, Adam Ford wrote:
>
> ...
>
> > > Mine also states the DSI source needs to provide correct video timing
> > > with start and stop sync packets.
> > >
> > > If I
Hi Marco
On Thu, 4 Aug 2022 at 10:38, Marco Felsch wrote:
>
> Hi Dave, Adam,
>
> On 22-08-03, Dave Stevenson wrote:
> > Hi Adam
> >
> > On Wed, 3 Aug 2022 at 12:03, Adam Ford wrote:
>
> ...
>
> > > > Did managed to get access to the ADV7535 programming guide? This is the
> > > > black box here.
On 22-08-03, Dave Stevenson wrote:
> On Wed, 3 Aug 2022 at 13:31, Adam Ford wrote:
...
> > Mine also states the DSI source needs to provide correct video timing
> > with start and stop sync packets.
> >
> > If I remember correctly, it seemed like Marek V wanted the hard coded
> >
On 22-08-03, Adam Ford wrote:
> On Wed, Aug 3, 2022 at 7:17 AM Dave Stevenson
...
> > Not meaning to butt in, but I have datasheets for ADV7533 and 7535
> > from previously looking at these chips.
>
> Thanks for the feedback.
>
> > Mine fairly plainly states:
> > "The DSI receiver input
Hi Dave, Adam,
On 22-08-03, Dave Stevenson wrote:
> Hi Adam
>
> On Wed, 3 Aug 2022 at 12:03, Adam Ford wrote:
...
> > > Did managed to get access to the ADV7535 programming guide? This is the
> > > black box here. Let me check if I can provide you a link with our repo
> > > so you can test
On 22-08-03, Adam Ford wrote:
> On Wed, Aug 3, 2022 at 1:20 AM Marco Felsch wrote:
> >
> > On 22-08-02, Adam Ford wrote:
> >
> > ...
> >
> > > > I did some reading about the internal timing generator. It appears
> > > > that it's required when video formats use fractional bytes, and it's
> > > >
On Wed, 3 Aug 2022 at 13:31, Adam Ford wrote:
>
> On Wed, Aug 3, 2022 at 7:17 AM Dave Stevenson
> wrote:
> >
> > Hi Adam
> >
> > On Wed, 3 Aug 2022 at 12:03, Adam Ford wrote:
> > >
> > > On Wed, Aug 3, 2022 at 1:20 AM Marco Felsch
> > > wrote:
> > > >
> > > > On 22-08-02, Adam Ford wrote:
> >
On Wed, Aug 3, 2022 at 7:17 AM Dave Stevenson
wrote:
>
> Hi Adam
>
> On Wed, 3 Aug 2022 at 12:03, Adam Ford wrote:
> >
> > On Wed, Aug 3, 2022 at 1:20 AM Marco Felsch wrote:
> > >
> > > On 22-08-02, Adam Ford wrote:
> > >
> > > ...
> > >
> > > > > I did some reading about the internal timing
Hi Adam
On Wed, 3 Aug 2022 at 12:03, Adam Ford wrote:
>
> On Wed, Aug 3, 2022 at 1:20 AM Marco Felsch wrote:
> >
> > On 22-08-02, Adam Ford wrote:
> >
> > ...
> >
> > > > I did some reading about the internal timing generator. It appears
> > > > that it's required when video formats use
On Wed, Aug 3, 2022 at 1:20 AM Marco Felsch wrote:
>
> On 22-08-02, Adam Ford wrote:
>
> ...
>
> > > I did some reading about the internal timing generator. It appears
> > > that it's required when video formats use fractional bytes, and it's
> > > preconfigured to run at 720p by default, but
On 22-08-02, Adam Ford wrote:
...
> > I did some reading about the internal timing generator. It appears
> > that it's required when video formats use fractional bytes, and it's
> > preconfigured to run at 720p by default, but registers 28h through 37h
> > configure it for other video modes.
>
Hi Adam,
sorry for the delay.
On 22-08-02, Adam Ford wrote:
...
> > > I think that the most important one is the blanking calc. Can you try to
> > > revert "drm/bridge: adv7511: Repair bus_flags and bus_format" and check
> > > if you can get a output still? Also something to try would be to
On Tue, Aug 2, 2022 at 8:51 AM Adam Ford wrote:
>
> On Tue, Aug 2, 2022 at 7:13 AM Adam Ford wrote:
> >
> > On Tue, Aug 2, 2022 at 3:08 AM Marco Felsch wrote:
> > >
> > > Hi Adam, Fabio,
> > >
> > > On 22-08-01, Adam Ford wrote:
> > > > On Mon, Aug 1, 2022 at 8:53 PM Fabio Estevam wrote:
> > >
On Tue, Aug 2, 2022 at 7:13 AM Adam Ford wrote:
>
> On Tue, Aug 2, 2022 at 3:08 AM Marco Felsch wrote:
> >
> > Hi Adam, Fabio,
> >
> > On 22-08-01, Adam Ford wrote:
> > > On Mon, Aug 1, 2022 at 8:53 PM Fabio Estevam wrote:
> > > >
> > > > On Mon, Aug 1, 2022 at 10:39 PM Adam Ford wrote:
> > >
On Tue, Aug 2, 2022 at 3:08 AM Marco Felsch wrote:
>
> Hi Adam, Fabio,
>
> On 22-08-01, Adam Ford wrote:
> > On Mon, Aug 1, 2022 at 8:53 PM Fabio Estevam wrote:
> > >
> > > On Mon, Aug 1, 2022 at 10:39 PM Adam Ford wrote:
> > >
> > > > I managed to get my HDMI output working. I had the lanes
Hi Adam, Fabio,
On 22-08-01, Adam Ford wrote:
> On Mon, Aug 1, 2022 at 8:53 PM Fabio Estevam wrote:
> >
> > On Mon, Aug 1, 2022 at 10:39 PM Adam Ford wrote:
> >
> > > I managed to get my HDMI output working. I had the lanes set to 2
> > > instead of 4. Once I switched to 4-lanes, the monitor
On Mon, Aug 1, 2022 at 8:53 PM Fabio Estevam wrote:
>
> On Mon, Aug 1, 2022 at 10:39 PM Adam Ford wrote:
>
> > I managed to get my HDMI output working. I had the lanes set to 2
> > instead of 4. Once I switched to 4-lanes, the monitor came up in
> > 1080p. I haven't yet been able to get other
On Mon, Aug 1, 2022 at 10:39 PM Adam Ford wrote:
> I managed to get my HDMI output working. I had the lanes set to 2
> instead of 4. Once I switched to 4-lanes, the monitor came up in
> 1080p. I haven't yet been able to get other modes to work.
Ok, good. On another thread, you mentioned that
On Mon, Aug 1, 2022 at 6:12 PM Fabio Estevam wrote:
>
> Hi Marco,
>
> On Mon, Aug 1, 2022 at 7:55 PM Marco Felsch wrote:
>
> > Question is, does your setup work for all modes after applying your
> > patches and without using the NXP-downstream porches settings? We also
>
> Without Frieder's
Hi Marco,
On Mon, Aug 1, 2022 at 7:55 PM Marco Felsch wrote:
> Question is, does your setup work for all modes after applying your
> patches and without using the NXP-downstream porches settings? We also
Without Frieder's patch:
"drm/exynos: Fix horizontal timing settings in MHPORCH/MSYNC
On Mon, Aug 1, 2022 at 3:07 PM Adam Ford wrote:
>
> On Mon, Aug 1, 2022 at 2:33 PM Fabio Estevam wrote:
> >
> > Hi Adam,
> >
> > On Sat, Jul 30, 2022 at 12:16 PM Adam Ford wrote:
> > >
> > > Hey all,
> > >
> > > I am trying to test Jagan's patch series [1] to add support for the
> > > samsung
Hi Fabio, Adam,
+Cc Marek, Robert, Laurentiu
On 22-08-01, Fabio Estevam wrote:
> Hi Adam,
>
> On Sat, Jul 30, 2022 at 12:16 PM Adam Ford wrote:
> >
> > Hey all,
> >
> > I am trying to test Jagan's patch series [1] to add support for the
> > samsung dsim bridge which is used on the imx8mm to
On Mon, Aug 1, 2022 at 2:33 PM Fabio Estevam wrote:
>
> Hi Adam,
>
> On Sat, Jul 30, 2022 at 12:16 PM Adam Ford wrote:
> >
> > Hey all,
> >
> > I am trying to test Jagan's patch series [1] to add support for the
> > samsung dsim bridge which is used on the imx8mm to output DSI video.
> > The
Hi Adam,
On Sat, Jul 30, 2022 at 12:16 PM Adam Ford wrote:
>
> Hey all,
>
> I am trying to test Jagan's patch series [1] to add support for the
> samsung dsim bridge which is used on the imx8mm to output DSI video.
> The DSIM gets the video from the mxsfb, and in my case, the DSI is
> sent to
On Mon, Aug 1, 2022 at 5:54 AM Adam Ford wrote:
>
> On Mon, Aug 1, 2022 at 1:20 AM Marco Felsch wrote:
> >
> > Hi Adam,
> >
> > On 22-07-30, Adam Ford wrote:
> > > Hey all,
> > >
> > > I am trying to test Jagan's patch series [1] to add support for the
> > > samsung dsim bridge which is used on
On Mon, Aug 1, 2022 at 1:20 AM Marco Felsch wrote:
>
> Hi Adam,
>
> On 22-07-30, Adam Ford wrote:
> > Hey all,
> >
> > I am trying to test Jagan's patch series [1] to add support for the
> > samsung dsim bridge which is used on the imx8mm to output DSI video.
> > The DSIM gets the video from the
Hey all,
I am trying to test Jagan's patch series [1] to add support for the
samsung dsim bridge which is used on the imx8mm to output DSI video.
The DSIM gets the video from the mxsfb, and in my case, the DSI is
sent to the adv7535 for connecting to HDMI.
I have been able to get the device tree
42 matches
Mail list logo
