On 3/29/2024 9:41 AM, Kuogee Hsieh wrote:
Currently qmp_combo_dp_power_on() always return 0 in regardless of
return value of cfg->configure_dp_phy(). This patch propagate
return value of cfg->configure_dp_phy() all the way back to caller.
Fixes: 52e013d0bffa ("phy: qcom-qmp: Add support for
On Fri, 29 Mar 2024 at 18:48, Kuogee Hsieh wrote:
>
> At current x1e80100 interface table, interface #3 is wrongly
> connected to DP controller #0 and interface #4 wrongly connected
> to DP controller #2. Fix this problem by connect Interface #3 to
> DP controller #0 and interface #4 connect to
I2C v7, SMBus 3.2, and I3C specifications have replaced "master/slave"
with more appropriate terms. Inspired by and following on to Wolfram's
series to fix drivers/i2c/[1], fix the terminology for users of
I2C_ALGOBIT bitbanging interface, now that the approved verbiage exists
in the
I2C v7, SMBus 3.2, and I3C specifications have replaced "master/slave"
with more appropriate terms. Inspired by and following on to Wolfram's
series to fix drivers/i2c/[1], fix the terminology for users of
I2C_ALGOBIT bitbanging interface, now that the approved verbiage exists
in the
I2C v7, SMBus 3.2, and I3C specifications have replaced "master/slave"
with more appropriate terms. Inspired by and following on to Wolfram's
series to fix drivers/i2c/[1], fix the terminology for users of
I2C_ALGOBIT bitbanging interface, now that the approved verbiage exists
in the
I2C v7, SMBus 3.2, and I3C specifications have replaced "master/slave"
with more appropriate terms. Inspired by and following on to Wolfram's
series to fix drivers/i2c/[1], fix the terminology for users of
I2C_ALGOBIT bitbanging interface, now that the approved verbiage exists
in the
I2C v7, SMBus 3.2, and I3C specifications have replaced "master/slave"
with more appropriate terms. Inspired by and following on to Wolfram's
series to fix drivers/i2c/[1], fix the terminology for users of
I2C_ALGOBIT bitbanging interface, now that the approved verbiage exists
in the
I2C v7, SMBus 3.2, and I3C specifications have replaced "master/slave"
with more appropriate terms. Inspired by and following on to Wolfram's
series to fix drivers/i2c/[1], fix the terminology for users of
I2C_ALGOBIT bitbanging interface, now that the approved verbiage exists
in the
I2C v7, SMBus 3.2, and I3C specifications have replaced "master/slave"
with more appropriate terms. Inspired by and following on to Wolfram's
series to fix drivers/i2c/[1], fix the terminology for users of
I2C_ALGOBIT bitbanging interface, now that the approved verbiage exists
in the
On 3/26/2024 2:23 PM, Miguel Ojeda wrote:
Clang 14 in an (essentially) defconfig arm64 build for next-20240326
reports [1]:
drivers/gpu/drm/msm/adreno/a6xx_gpu_state.c:843:6: error:
variable 'out' set but not used [-Werror,-Wunused-but-set-variable]
The variable `out` in these
At current x1e80100 interface table, interface #3 is wrongly
connected to DP controller #0 and interface #4 wrongly connected
to DP controller #2. Fix this problem by connect Interface #3 to
DP controller #0 and interface #4 connect to DP controller #1.
Also add interface #6, #7 and #8 connections
Hi Linus,
Regular fixes for rc2, quite a few i915/amdgpu as usual, some xe, and
then mostly scattered around. rc3 might be quieter with the holidays
but we shall see.
Regards.
Dave.
drm-fixes-2024-03-30:
drm fixes for 6.9-rc2
bridge:
- select DRM_KMS_HELPER
dma-buf:
- fix NULL-pointer deref
Hi,
On Sat, Feb 3, 2024 at 5:47 AM Dmitry Baryshkov
wrote:
>
> Both dp_link_adjust_levels() and dp_ctrl_update_vx_px() limit swing and
> pre-emphasis to 2, while the real maximum value for the sum of the
> voltage swing and pre-emphasis is 3. Fix the DP code to remove this
> limitation.
>
>
On Wed, Mar 27, 2024 at 07:39:20PM +, Simon Horman wrote:
[ ... ]
> > >
> > > Hi Guenter,
> > >
> > > a minor nit from my side: this change results in a Kernel doc warning.
> > >
> > > .../bug.h:29: warning: expecting prototype for _EMIT_BUG_ENTRY().
> > > Prototype was for
Currently qmp_combo_dp_power_on() always return 0 in regardless of
return value of cfg->configure_dp_phy(). This patch propagate
return value of cfg->configure_dp_phy() all the way back to caller.
Changes in V3:
-- add v2 changes log
Changes in V2:
-- add Fixes tag
-- add dev_err() to
Currently qmp_combo_dp_power_on() always return 0 in regardless of
return value of cfg->configure_dp_phy(). This patch propagate
return value of cfg->configure_dp_phy() all the way back to caller.
Fixes: 52e013d0bffa ("phy: qcom-qmp: Add support for DP in USB3+DP combo phy")
Signed-off-by: Kuogee
On 3/29/2024 10:38 AM, Andi Shyti wrote:
> Hi,
>
>
with more appropriate terms. Inspired by and following on to Wolfram's
series to fix drivers/i2c/[1], fix the terminology for users of
I2C_ALGOBIT bitbanging interface, now that the approved verbiage exists
in the
The pull request you sent on Sat, 30 Mar 2024 06:29:04 +1000:
> https://gitlab.freedesktop.org/drm/kernel.git tags/drm-fixes-2024-03-30
has been merged into torvalds/linux.git:
https://git.kernel.org/torvalds/c/486291a0e6246364936df1ecd64c90affef4b9c5
Thank you!
--
Deet-doot-dot, I am a bot.
On Fri, Mar 29, 2024 at 12:38:33AM +, Klymenko, Anatoliy wrote:
> Thank you for the feedback.
> > From: Krzysztof Kozlowski
> > Subject: Re: [PATCH v3 8/9] dt-bindings: xlnx: Add VTC and TPG bindings
> > On 22/03/2024 20:12, Klymenko, Anatoliy wrote:
> > >> From: Krzysztof Kozlowski
> > >>
On 10/01/2024 00:07, Christian Hewitt wrote:
Playing 4K media with 59.94 fractional rate (typically VP9) causes the screen
to lose
sync with the following error reported in the system log:
[ 89.610280] Fatal Error, invalid HDMI vclk freq 593406
Modetest shows the following:
3840x2160 59.94
On 29/03/2024 13:35, Jerome Brunet wrote:
On Mon 25 Mar 2024 at 12:09, Neil Armstrong wrote:
In order to setup the DSI clock, let's make the unused VCLK2 clock path
configuration via CCF.
The nocache option is removed from following clocks:
- vclk2_sel
- vclk2_input
- vclk2_div
- vclk2
-
On 29/03/2024 13:33, Jerome Brunet wrote:
On Mon 25 Mar 2024 at 12:09, Neil Armstrong wrote:
The VCLK and VCLK_DIV clocks have supplementary bits.
The VCLK gate has a "SOFT RESET" bit to toggle after the whole
VCLK sub-tree rate has been set, this is implemented in
the gate enable callback.
On 3/28/2024 3:27 AM, Marek Vasut wrote:
G121XCE-L01 is a Color Active Matrix Liquid Crystal Display composed of
a TFT LCD panel, a driver circuit, and LED backlight system. The screen
format is intended to support the 4:3, 1024(H) x 768(V) screen and either
262k/16.7M colors (RGB 6-bits or
On Tue, Mar 26, 2024 at 7:29 PM Zhiguo Jiang wrote:
>
> The issue is a UAF issue of dmabuf file fd. Throght debugging, we found
> that the dmabuf file fd is added to the epoll event listener list, and
> when it is released, it is not removed from the epoll list, which leads
> to the
On 3/28/2024 3:27 AM, Marek Vasut wrote:
Use display_timing instead of drm_display_mode to define a range of
possible display timings supported by this panel. This makes the panel
support more flexible and improves compatibility. No functional change
is expected.
The settings are picked from
I2C v7, SMBus 3.2, and I3C specifications have replaced "master/slave"
with more appropriate terms. Inspired by and following on to Wolfram's
series to fix drivers/i2c[1], fix the terminology for users of
I2C_ALGOBIT bitbanging interface, now that the approved verbiage exists
in the specification.
I2C v7, SMBus 3.2, and I3C specifications have replaced "master/slave"
with more appropriate terms. Inspired by and following on to Wolfram's
series to fix drivers/i2c/[1], fix the terminology for users of
I2C_ALGOBIT bitbanging interface, now that the approved verbiage exists
in the
I2C v7, SMBus 3.2, and I3C specifications have replaced "master/slave"
with more appropriate terms. Inspired by and following on to Wolfram's
series to fix drivers/i2c/[1], fix the terminology for users of
I2C_ALGOBIT bitbanging interface, now that the approved verbiage exists
in the
On 3/28/2024 3:27 AM, Marek Vasut wrote:
The .bpc = 6 implies .bus_format = MEDIA_BUS_FMT_RGB666_1X7X3_SPWG ,
add the missing bus_format. Add missing connector type and bus_flags
as well.
Documentation [1] 1.4 GENERAL SPECIFICATI0NS indicates this panel is
capable of both RGB 18bit/24bit
I2C v7, SMBus 3.2, and I3C specifications have replaced "master/slave"
with more appropriate terms. Inspired by and following on to Wolfram's
series to fix drivers/i2c/[1], fix the terminology for users of
I2C_ALGOBIT bitbanging interface, now that the approved verbiage exists
in the
I2C v7, SMBus 3.2, and I3C specifications have replaced "master/slave"
with more appropriate terms. Inspired by and following on to Wolfram's
series to fix drivers/i2c/[1], fix the terminology for users of
I2C_ALGOBIT bitbanging interface, now that the approved verbiage exists
in the
I2C v7, SMBus 3.2, and I3C specifications have replaced "master/slave"
with more appropriate terms. Inspired by and following on to Wolfram's
series to fix drivers/i2c/[1], fix the terminology for users of
I2C_ALGOBIT bitbanging interface, now that the approved verbiage exists
in the
Various Kconfig options selected the per-architecture helpers for
fbdev. But none of the contained code depends on fbdev. Standardize
on CONFIG_VIDEO, which will allow to add more general helpers for
video functionality.
CONFIG_VIDEO protects each architecture's video/ directory. This
allows for
The per-architecture fbdev code has no dependencies on fbdev and can
be used for any video-related subsystem. Rename the files to 'video'.
Use video-sti.c on parisc as the source file depends on CONFIG_STI_CORE.
On arc, arm, arm64, sh, and um the asm header file is an empty wrapper
around the
At current x1e80100 interface table, interface #3 is wrongly
connected to DP controller #0 and interface #4 wrongly connected
to DP controller #2. Fix this problem by connect Interface #3 to
DP controller #0 and interface #4 connect to DP controller #1.
Also add interface #6, #7 and #8 connections
I2C v7, SMBus 3.2, and I3C specifications have replaced "master/slave"
with more appropriate terms. Inspired by and following on to Wolfram's series
to fix drivers/i2c[1], fix the terminology where I had a role to play, now that
the approved verbiage exists in the specification.
Compile tested,
I2C v7, SMBus 3.2, and I3C specifications have replaced "master/slave"
with more appropriate terms. Inspired by and following on to Wolfram's
series to fix drivers/i2c/[1], fix the terminology for users of the
I2C_ALGOBIT bitbanging interface, now that the approved verbiage exists
in the
Hi Easwar,
On Fri, Mar 29, 2024 at 05:00:26PM +, Easwar Hariharan wrote:
> I2C v7, SMBus 3.2, and I3C specifications have replaced "master/slave"
I don't understand why we forget that i3c is 1.1.1 :-)
> with more appropriate terms. Inspired by and following on to Wolfram's
> series to fix
From: John Harrison
The previous fix for the circlular lock splat about the busyness
worker wasn't quite complete. Even though the reset-in-progress flag
is cleared at the start of intel_uc_reset_finish, the entire function
is still inside the reset mutex lock. Not sure why the patch appeared
to
On Fri, Mar 29, 2024 at 07:23:07AM +0200, Dmitry Baryshkov wrote:
> On Fri, 29 Mar 2024 at 06:02, Bjorn Andersson
> wrote:
> > diff --git a/drivers/gpu/drm/msm/dp/dp_display.c
> > b/drivers/gpu/drm/msm/dp/dp_display.c
[..]
> > static const struct msm_dp_desc sc8280xp_edp_descs[] = {
>
> This
Hi,
On Tue, 09 Jan 2024 23:07:04 +, Christian Hewitt wrote:
> Playing 4K media with 59.94 fractional rate (typically VP9) causes the screen
> to lose
> sync with the following error reported in the system log:
>
> [ 89.610280] Fatal Error, invalid HDMI vclk freq 593406
>
> Modetest shows
Hi,
On Mon, 25 Mar 2024 08:49:54 -0500, Chris Morgan wrote:
> From: Chris Morgan
>
> Add support for the GameForce Chi [1].
>
> The GameForce Chi has the following hardware:
> Tested:
> - 3.5" dual lane 640x480 DSI display.
> - 15 GPIO based face buttons.
> - 2 ADC based face buttons.
> -
On 3/29/2024 10:16 AM, Andi Shyti wrote:
> Hi Easwar,
>
> On Fri, Mar 29, 2024 at 05:00:26PM +, Easwar Hariharan wrote:
>> I2C v7, SMBus 3.2, and I3C specifications have replaced "master/slave"
>
> I don't understand why we forget that i3c is 1.1.1 :-)
That's because it's a copy-paste error
On 3/29/2024 10:28 AM, Easwar Hariharan wrote:
> On 3/29/2024 10:16 AM, Andi Shyti wrote:
>> Hi Easwar,
>>
>>
>> The specification talks about:
>>
>> - master -> controller
>> - slave -> target (and not client)
>>
>> But both you and Wolfram have used client. I'd like to reach
>> some more
Hi,
On Fri, Mar 29, 2024 at 10:28:14AM -0700, Easwar Hariharan wrote:
> On 3/29/2024 10:16 AM, Andi Shyti wrote:
> > Hi Easwar,
> >
> > On Fri, Mar 29, 2024 at 05:00:26PM +, Easwar Hariharan wrote:
> >> I2C v7, SMBus 3.2, and I3C specifications have replaced "master/slave"
> >
> > I don't
Hello:
This series was applied to netdev/net-next.git (main)
by Jakub Kicinski :
On Tue, 26 Mar 2024 23:37:59 +0100 you wrote:
> From: Arnd Bergmann
>
> With randconfig build testing, I found only eight files that produce
> warnings with clang when -Wformat-truncation is enabled. This means
>
The per-architecture video helpers do not depend on struct fb_info
or anything else from fbdev. Remove it from the interface and replace
fb_is_primary_device() with video_is_primary_device(). The new helper
is similar in functionality, but can operate on non-fbdev devices.
Signed-off-by: Thomas
Make architecture helpers for display functionality depend on general
video functionality instead of fbdev. This avoids the dependency on
fbdev and makes the functionality available for non-fbdev code.
Patch 1 replaces the variety of Kconfig options that control the
Makefiles with CONFIG_VIDEO.
> -Original Message-
> From: Conor Dooley
> Sent: Friday, March 29, 2024 8:47 AM
> To: Klymenko, Anatoliy
> Cc: Krzysztof Kozlowski ; Laurent Pinchart
> ; Maarten Lankhorst
> ; Maxime Ripard
> ; Thomas Zimmermann ;
> David Airlie ; Daniel Vetter ; Simek,
> Michal ; Andrzej Hajda
> ;
Hi Doug
On 3/29/2024 4:07 PM, Doug Anderson wrote:
Hi,
On Sat, Feb 3, 2024 at 5:47 AM Dmitry Baryshkov
wrote:
Both dp_link_adjust_levels() and dp_ctrl_update_vx_px() limit swing and
pre-emphasis to 2, while the real maximum value for the sum of the
voltage swing and pre-emphasis is 3. Fix
In case of CMD DSI panels, the vblank IRQ can be used outside of
irq_enable/irq_disable pair. This results in the following kind of
messages. Move assignment of IRQ indices to atomic_enable /
atomic_disable callbacks.
[dpu error]invalid IRQ=[134217727, 31]
There is little point in using %ps to print a value known to be NULL. On
the other hand it makes sense to print the callback symbol in the
'invalid IRQ' message. Correct those two error messages to make more
sense.
Fixes: 6893199183f8 ("drm/msm/dpu: stop using raw IRQ indices in the kernel
From: Sumit Semwal
LG SW43408 is 1080x2160, 4-lane MIPI-DSI panel present on Google Pixel 3
phones.
Signed-off-by: Vinod Koul
Signed-off-by: Sumit Semwal
[caleb: convert to yaml]
Signed-off-by: Caleb Connolly
Signed-off-by: Dmitry Baryshkov
---
.../bindings/display/panel/lg,sw43408.yaml
From: Sumit Semwal
LG SW43408 is 1080x2160, 4-lane MIPI-DSI panel, used in some Pixel3
phones.
Whatever init sequence we have for this panel isn't capable of
initialising it completely, toggling the reset gpio ever causes the
panel to die. Until this is resolved we avoid resetting the panel.
The LG SW43408 panel is used on Google Pixel3 devices. For a long time
we could not submit the driver, as the panel was not coming up from the
reset. The panel seems to be picky about some of the delays during init
and it also uses non-standard payload for MIPI_DSI_COMPRESSION_MODE.
The LG SW43408 panel requires sending non-standard data as a part of the
MIPI_DSI_COMPRESSION_MODE packet. Rather than hacking existing
mipi_dsi_compression_mode() add mipi_dsi_compression_mode_raw(), which
accepts raw data buffer and length.
Signed-off-by: Dmitry Baryshkov
---
On Thu, Mar 21, 2024 at 03:55:37PM +0800, guomengqi (A) wrote:
>
> 在 2024/3/21 15:39, Greg KH 写道:
> > On Thu, Mar 21, 2024 at 03:07:52PM +0800, Guo Mengqi wrote:
> > > commit 73a82b22963d ("drm/atomic: Fix potential use-after-free
> > > in nonblocking commits") introduced drm_dev_get/put() to
> >
Hi Rodrigo,
When I opened dashboard early morning all results were available, so I don't
think there was any issue during night.
It could be long reporting queue - reporting through AWS takes ages but this is
not an issue with reporting, this is how AWS works.
Regards,
Ewelina
-Original
Am 29.03.24 um 12:10 schrieb Christian König:
Am 25.03.24 um 08:45 schrieb Jesse Zhang:
remove the unsed the paramter in the function
ttm_bo_bounce_temp_buffer and ttm_bo_add_move_fence.
Signed-off-by: Jesse Zhang
Good catch, Reviewed-by: Christian König
Please rebase that patch on top
On 29/03/2024 11:27, Bartosz Golaszewski wrote:
> On Wed, Mar 27, 2024 at 1:45 PM Krzysztof Kozlowski
> wrote:
>>
>> virtio core already sets the .owner, so driver does not need to.
>>
>> Signed-off-by: Krzysztof Kozlowski
>>
>> ---
>>
>> Depends on the first patch.
>> ---
>>
On Fri, Mar 29, 2024 at 12:35 PM Krzysztof Kozlowski
wrote:
>
> On 29/03/2024 11:27, Bartosz Golaszewski wrote:
> > On Wed, Mar 27, 2024 at 1:45 PM Krzysztof Kozlowski
> > wrote:
> >>
> >> virtio core already sets the .owner, so driver does not need to.
> >>
> >> Signed-off-by: Krzysztof
From: Shradha Gupta
[ Upstream commit 5abffb66d12bcac84bf7b66389c571b8bb6e82bd ]
In drm_kms_helper_poll_disable() check if output polling
support is initialized before disabling polling. If not flag
this as a warning.
Additionally in drm_mode_config_helper_suspend() and
From: Koby Elbaz
[ Upstream commit 8c075401f2dbda43600c61f780a165abde77877a ]
Fix a warning of a buffer overflow:
‘snprintf’ output between 38 and 47 bytes into a destination of size 32
Signed-off-by: Koby Elbaz
Reviewed-by: Oded Gabbay
Signed-off-by: Oded Gabbay
Signed-off-by: Sasha Levin
On Fri, Mar 29, 2024 at 11:27:19AM +0100, Bartosz Golaszewski wrote:
On Wed, Mar 27, 2024 at 1:45 PM Krzysztof Kozlowski
wrote:
virtio core already sets the .owner, so driver does not need to.
Signed-off-by: Krzysztof Kozlowski
---
Depends on the first patch.
---
Am 25.03.24 um 08:45 schrieb Jesse Zhang:
remove the unsed the paramter in the function
ttm_bo_bounce_temp_buffer and ttm_bo_add_move_fence.
Signed-off-by: Jesse Zhang
Good catch, Reviewed-by: Christian König
Regards,
Christian.
---
drivers/gpu/drm/ttm/ttm_bo.c | 10 --
1 file
On 29.03.24 06:38, Kasireddy, Vivek wrote:
Hi David,
On 25.02.24 08:56, Vivek Kasireddy wrote:
Currently, some drivers (e.g, Udmabuf) that want to longterm-pin
the pages/folios associated with a memfd, do so by simply taking a
reference on them. This is not desirable because the pages/folios
On Wed, Mar 27, 2024 at 01:40:54PM +0100, Krzysztof Kozlowski wrote:
Modules registering driver with register_virtio_driver() might forget to
set .owner field. i2c-virtio.c for example has it missing. The field
is used by some of other kernel parts for reference counting
(try_module_get()), so
On 29/03/2024 12:42, Stefano Garzarella wrote:
>> };
>>
>> -int register_virtio_driver(struct virtio_driver *driver)
>> +int __register_virtio_driver(struct virtio_driver *driver, struct module
>> *owner)
>> {
>> /* Catch this early. */
>> BUG_ON(driver->feature_table_size &&
From: Samuel Dionne-Riel
[ Upstream commit 2f862fdc0fd802e728b6ca96bc78ec3f01bf161e ]
This adds a DMI orientation quirk for the GPD Win Mini panel.
Signed-off-by: Samuel Dionne-Riel
Signed-off-by: Linus Walleij
Link:
From: Alvin Lee
[ Upstream commit fc9f47455ae143e8831415a46eab3fbc69e408aa ]
[Why & How]
For FPO and SubVP/DRR cases we need to ensure to program
OTG_V_TOTAL_MIN/MAX_SEL, otherwise stretching the vblank
in FPO / SubVP / DRR cases will not have any effect
and we could hit underflow / corruption.
From: Nicholas Kazlauskas
[ Upstream commit 6226a5aa77370329e01ee8abe50a95e60618ce97 ]
[Why]
Workaroud for a race condition where DMCUB is in the process of
committing to IPS1 during the handshake causing us to miss the
transition into IPS2 and touch the INBOX1 RPTR causing a HW hang.
[How]
From: Tony Lindgren
[ Upstream commit dc90214ff58be575fdceb549f901506cdef5d093 ]
The BOE BP082WX1-100 is a 8.2" panel similar to the 10.1" panel
BP101WX1-100. Both panels use the same timings.
Acked-by: Conor Dooley
Reviewed-by: Dmitry Baryshkov
Signed-off-by: Tony Lindgren
Link:
On Wed, Mar 27, 2024 at 1:45 PM Krzysztof Kozlowski
wrote:
>
> virtio core already sets the .owner, so driver does not need to.
>
> Signed-off-by: Krzysztof Kozlowski
>
> ---
>
> Depends on the first patch.
> ---
> drivers/gpio/gpio-virtio.c | 1 -
> 1 file changed, 1 deletion(-)
>
> diff --git
On 29.03.2024 8:45 AM, Luca Weiss wrote:
> Add the node for the DisplayPort controller found on the SM6350 SoC.
>
> Reviewed-by: Dmitry Baryshkov
> Signed-off-by: Luca Weiss
> ---
Reviewed-by: Konrad Dybcio
Konrad
On Wed, Mar 27, 2024 at 01:41:09PM +0100, Krzysztof Kozlowski wrote:
virtio core already sets the .owner, so driver does not need to.
Signed-off-by: Krzysztof Kozlowski
---
Depends on the first patch.
---
net/vmw_vsock/virtio_transport.c | 1 -
1 file changed, 1 deletion(-)
Acked-by:
On Mon 25 Mar 2024 at 12:09, Neil Armstrong wrote:
> The VCLK and VCLK_DIV clocks have supplementary bits.
>
> The VCLK gate has a "SOFT RESET" bit to toggle after the whole
> VCLK sub-tree rate has been set, this is implemented in
> the gate enable callback.
>
> The VCLK_DIV clocks as enable
From: "Stanley.Yang"
[ Upstream commit 601429cca96b4af3be44172c3b64e4228515dbe1 ]
Why:
The PCI error slot reset maybe triggered after inject ue to UMC multi
times, this
caused system hang.
[ 557.371857] amdgpu :af:00.0: amdgpu: GPU reset succeeded, trying to
resume
[
From: Maíra Canal
[ Upstream commit 5ee0d47dcf33efd8950b347dcf4d20bab12a3fa9 ]
Currently, when using non-blocking commits, we can see the following
kernel warning:
[ 110.908514] [ cut here ]
[ 110.908529] refcount_t: underflow; use-after-free.
[ 110.908620] WARNING:
From: Vignesh Raman
[ Upstream commit d315a68e94a76310c349add3f9c914cefda0a87f ]
build-kdl.sh was doing a `clone --depth 1` of the default branch,
then checking out a commit that might not be the latest of that
branch, resulting in container build error.
From: Christian König
[ Upstream commit 28e5126718c7b306b8c29d2ae8f48417e9303aa1 ]
Only convert it to ENOMEM in ttm_bo_validate.
This allows ttm_bo_validate to distinguish between an out of memory
situation and just out of space in a placement domain.
v2: improve commit message
v3: fix
From: Sohaib Nadeem
[ Upstream commit d46fb0068c54d3dc95ae8298299c4d9edb0fb7c1 ]
[why]
Originally, PMFW said min FCLK is 300Mhz, but min DCFCLK can be increased
to 400Mhz because min FCLK is now 600Mhz so FCLK >= 1.5 * DCFCLK hardware
requirement will still be satisfied. Increasing min DCFCLK
From: Srinivasan Shanmugam
[ Upstream commit eb4f139888f636614dab3bcce97ff61cefc4b3a7 ]
This ensures that the memory mapped by ioremap for adev->rmmio, is
properly handled in amdgpu_device_init(). If the function exits early
due to an error, the memory is unmapped. If the function completes
From: Aric Cyr
[ Upstream commit 14d68acfd04b39f34eea7bea65dda652e6db5bf6 ]
[Why]
Nanosec stats can overflow on long running systems potentially causing
statistic logging issues.
[How]
Use 64bit types for nanosec stats to ensure no overflow.
Reviewed-by: Rodrigo Siqueira
Tested-by: Daniel
From: Samuel Dionne-Riel
[ Upstream commit 2f862fdc0fd802e728b6ca96bc78ec3f01bf161e ]
This adds a DMI orientation quirk for the GPD Win Mini panel.
Signed-off-by: Samuel Dionne-Riel
Signed-off-by: Linus Walleij
Link:
From: Christian König
[ Upstream commit 28e5126718c7b306b8c29d2ae8f48417e9303aa1 ]
Only convert it to ENOMEM in ttm_bo_validate.
This allows ttm_bo_validate to distinguish between an out of memory
situation and just out of space in a placement domain.
v2: improve commit message
v3: fix
From: Aric Cyr
[ Upstream commit 14d68acfd04b39f34eea7bea65dda652e6db5bf6 ]
[Why]
Nanosec stats can overflow on long running systems potentially causing
statistic logging issues.
[How]
Use 64bit types for nanosec stats to ensure no overflow.
Reviewed-by: Rodrigo Siqueira
Tested-by: Daniel
On Mon 25 Mar 2024 at 12:09, Neil Armstrong wrote:
> In order to setup the DSI clock, let's make the unused VCLK2 clock path
> configuration via CCF.
>
> The nocache option is removed from following clocks:
> - vclk2_sel
> - vclk2_input
> - vclk2_div
> - vclk2
> - vclk_div1
> - vclk2_div2_en
>
From: Koby Elbaz
[ Upstream commit 8c075401f2dbda43600c61f780a165abde77877a ]
Fix a warning of a buffer overflow:
‘snprintf’ output between 38 and 47 bytes into a destination of size 32
Signed-off-by: Koby Elbaz
Reviewed-by: Oded Gabbay
Signed-off-by: Oded Gabbay
Signed-off-by: Sasha Levin
Add the required changes to support DisplayPort (normally(?) available
via the USB-C connector) on the SM6350/SM7225 SoC.
This has been tested on a Fairphone 4 smartphone with additional changes
not included in this series (mostly just wiring up TCPM and the SBU
mux).
Signed-off-by: Luca Weiss
Add the node for the DisplayPort controller found on the SM6350 SoC.
Reviewed-by: Dmitry Baryshkov
Signed-off-by: Luca Weiss
---
arch/arm64/boot/dts/qcom/sm6350.dtsi | 88
1 file changed, 88 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sm6350.dtsi
Add the compatible string for the DisplayPort controller on SM6350 which
is compatible with the one on SM8350.
Acked-by: Rob Herring
Signed-off-by: Luca Weiss
---
Documentation/devicetree/bindings/display/msm/dp-controller.yaml | 1 +
1 file changed, 1 insertion(+)
diff --git
Document the displayport controller subnode of the SM6350 MDSS.
Signed-off-by: Luca Weiss
---
.../devicetree/bindings/display/msm/qcom,sm6350-mdss.yaml| 9 +
1 file changed, 9 insertions(+)
diff --git
a/Documentation/devicetree/bindings/display/msm/qcom,sm6350-mdss.yaml
Provide a helper to shrink ttm_tt page-vectors on a per-page
basis. A ttm_backup backend could then in theory get away with
allocating a single temporary page for each struct ttm_tt.
This is accomplished by splitting larger pages before trying to
back them up.
In the future we could allow
The -ENOSPC failure from ttm_bo_swapout() meant that the lru_lock
was dropped and simply restarting the iteration meant we'd likely
hit the same error again on the same resource. Now that we can
restart the iteration even if the lock was dropped, do that.
Cc: Christian König
Cc: Somalapuram
Have iterators insert themselves into the list they are iterating
over using hitch list nodes. Since only the iterator owner
can remove these list nodes from the list, it's safe to unlock
the list and when continuing, use them as a starting point. Due to
the way LRU bumping works in TTM, newly
This series implements TTM shrinker / eviction helpers and an xe bo
shrinker. It builds on two previous series. First
https://www.mail-archive.com/dri-devel@lists.freedesktop.org/msg484425.html
for patch 1-4, which IMO still could be reviewed and pushed as a
separate series.
Second the previous
Export the needed functions from TTM and provide a generic LRU
walker in xe, in the spirit of drm_gem_lru_scan() but building
on the restartable TTM LRU functionality.
The LRU walker optionally supports locking objects as part of
a drm_exec locking transaction, and can thus be used for both
Initially intended for experimenting with different backup
solutions (shmem vs direct swap cache insertion), abstract
the backup destination using a virtual base class.
Also provide a sample implementation for shmem.
While when settling on a preferred backup solution, one could
perhaps skip the
To address the problem with hitches moving when bulk move
sublists are lru-bumped, register the list cursors with the
ttm_lru_bulk_move structure when traversing its list, and
when lru-bumping the list, move the cursor hitch to the tail.
This also means it's mandatory for drivers to call
To be able to handle list unlocking while traversing the LRU
list, we want the iterators not only to point to the next
position of the list traversal, but to insert themselves as
list nodes at that point to work around the fact that the
next node might otherwise disappear from the list while
the
1 - 100 of 118 matches
Mail list logo
