Re: [linux-sunxi] Re: [PATCH v2 04/27] dt-bindings: display: sunxi-drm: Add TCON TOP description
On Wed, Jun 13, 2018 at 06:03:21PM +0200, Jernej Škrabec wrote: > > > +Required properties: > > > + - compatible: value must be one of: > > > +* allwinner,sun8i-r40-tcon-top > > > + - reg: base address and size of the memory-mapped region. > > > + - clocks: phandle to the clocks feeding the TCON TOP > > > +* bus: TCON TOP interface clock > > > + - clock-names: clock name mentioned above > > > + - resets: phandle to the reset line driving the DRC > > > > s/DRC/TCON TOP/ ? > > Yes, copy & paste issue > > > > > > +* rst: TCON TOP reset line > > > > Remaining consistent with the clock name would be great > > You mean "ahb"? I noticed that most other nodes with reset lines don't have a > name associated. Maybe I could just drop it and use first specified reset? It's called bus in the binding, but yes. And yeah, we can drop the name as well. > > > > > + - reset-names: reset name mentioned above > > > + - #clock-cells : must contain 1 > > > > An example would be nice here > > You mean node example? with ports? In the past, Rob was against examples > unless really necessary. Node from R40 DTSI can serve as an example. Ok. Maxime -- Maxime Ripard, Bootlin (formerly Free Electrons) Embedded Linux and Kernel engineering https://bootlin.com signature.asc Description: PGP signature ___ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel
Re: [linux-sunxi] Re: [PATCH v2 04/27] dt-bindings: display: sunxi-drm: Add TCON TOP description
Hi, Dne sreda, 13. junij 2018 ob 09:34:56 CEST je Maxime Ripard napisal(a): > Hi, > > Thanks for working on this! > > On Tue, Jun 12, 2018 at 10:00:13PM +0200, Jernej Skrabec wrote: > > TCON TOP main purpose is to configure whole display pipeline. It > > determines relationships between mixers and TCONs, selects source TCON > > for HDMI, muxes LCD and TV encoder GPIO output, selects TV encoder > > clock source and contains additional TV TCON and DSI gates. > > > > Signed-off-by: Jernej Skrabec > > --- > > > > .../bindings/display/sunxi/sun4i-drm.txt | 45 +++ > > include/dt-bindings/clock/sun8i-tcon-top.h| 11 + > > 2 files changed, 56 insertions(+) > > create mode 100644 include/dt-bindings/clock/sun8i-tcon-top.h > > > > diff --git a/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt > > b/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt index > > 3346c1e2a7a0..ef64c589a4b3 100644 > > --- a/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt > > +++ b/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt > > > > @@ -187,6 +187,51 @@ And on the A23, A31, A31s and A33, you need one more clock line: > > - 'lvds-alt': An alternative clock source, separate from the TCON > > channel 0 > > > > clock, that can be used to drive the LVDS clock > > > > +TCON TOP > > + > > + > > +TCON TOPs main purpose is to configure whole display pipeline. It > > determines +relationships between mixers and TCONs, selects source TCON > > for HDMI, muxes +LCD and TV encoder GPIO output, selects TV encoder clock > > source and contains +additional TV TCON and DSI gates. > > + > > +It allows display pipeline to be configured in very different ways: > > + > > + / LCD0/LVDS0 > > + / TCON-LCD0 > > + | \ MIPI DSI > > + mixer0 | > > +\/ TCON-LCD1 - LCD1/LVDS1 > > + TCON-TOP > > +/\ TCON-TV0 - TVE0/RGB > > + mixer1 | \ > > + | TCON-TOP - HDMI > > + | / > > + \ TCON-TV1 - TVE1/RGB > > + > > +Note that both TCON TOP references same physical unit. > > + > > +Required properties: > > + - compatible: value must be one of: > > +* allwinner,sun8i-r40-tcon-top > > + - reg: base address and size of the memory-mapped region. > > + - clocks: phandle to the clocks feeding the TCON TOP > > +* bus: TCON TOP interface clock > > + - clock-names: clock name mentioned above > > + - resets: phandle to the reset line driving the DRC > > s/DRC/TCON TOP/ ? Yes, copy & paste issue > > > +* rst: TCON TOP reset line > > Remaining consistent with the clock name would be great You mean "ahb"? I noticed that most other nodes with reset lines don't have a name associated. Maybe I could just drop it and use first specified reset? > > > + - reset-names: reset name mentioned above > > + - #clock-cells : must contain 1 > > An example would be nice here You mean node example? with ports? In the past, Rob was against examples unless really necessary. Node from R40 DTSI can serve as an example. > > > +- ports: A ports node with endpoint definitions as defined in > > +Documentation/devicetree/bindings/media/video-interfaces.txt. The > > first port +should be the input for mixer0 mux. The second should be > > the output for that +mux. Third port should be input for mixer1 mux. > > Fourth port should be output +for mixer1 mux. Fifth port should be > > input for HDMI mux. Sixth port should +be output for it. All output > > endpoints should have reg property with the id +of the target TCON. > > All ports should have only one enpoint connected to > ^ endpoint > > I guess it would me more readable if you were to make it a bullet > list, but this works for me otherwise. Since I have to fix this patch anyway, I can refactor this text. Best regards, Jernej ___ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel
Re: [PATCH v2 04/27] dt-bindings: display: sunxi-drm: Add TCON TOP description
Hi, Thanks for working on this! On Tue, Jun 12, 2018 at 10:00:13PM +0200, Jernej Skrabec wrote: > TCON TOP main purpose is to configure whole display pipeline. It > determines relationships between mixers and TCONs, selects source TCON > for HDMI, muxes LCD and TV encoder GPIO output, selects TV encoder > clock source and contains additional TV TCON and DSI gates. > > Signed-off-by: Jernej Skrabec > --- > .../bindings/display/sunxi/sun4i-drm.txt | 45 +++ > include/dt-bindings/clock/sun8i-tcon-top.h| 11 + > 2 files changed, 56 insertions(+) > create mode 100644 include/dt-bindings/clock/sun8i-tcon-top.h > > diff --git a/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt > b/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt > index 3346c1e2a7a0..ef64c589a4b3 100644 > --- a/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt > +++ b/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt > @@ -187,6 +187,51 @@ And on the A23, A31, A31s and A33, you need one more > clock line: > - 'lvds-alt': An alternative clock source, separate from the TCON channel > 0 > clock, that can be used to drive the LVDS clock > > +TCON TOP > + > + > +TCON TOPs main purpose is to configure whole display pipeline. It determines > +relationships between mixers and TCONs, selects source TCON for HDMI, muxes > +LCD and TV encoder GPIO output, selects TV encoder clock source and contains > +additional TV TCON and DSI gates. > + > +It allows display pipeline to be configured in very different ways: > + > + / LCD0/LVDS0 > + / TCON-LCD0 > + | \ MIPI DSI > + mixer0 | > +\/ TCON-LCD1 - LCD1/LVDS1 > + TCON-TOP > +/\ TCON-TV0 - TVE0/RGB > + mixer1 | \ > + | TCON-TOP - HDMI > + | / > + \ TCON-TV1 - TVE1/RGB > + > +Note that both TCON TOP references same physical unit. > + > +Required properties: > + - compatible: value must be one of: > +* allwinner,sun8i-r40-tcon-top > + - reg: base address and size of the memory-mapped region. > + - clocks: phandle to the clocks feeding the TCON TOP > +* bus: TCON TOP interface clock > + - clock-names: clock name mentioned above > + - resets: phandle to the reset line driving the DRC s/DRC/TCON TOP/ ? > +* rst: TCON TOP reset line Remaining consistent with the clock name would be great > + - reset-names: reset name mentioned above > + - #clock-cells : must contain 1 An example would be nice here > +- ports: A ports node with endpoint definitions as defined in > +Documentation/devicetree/bindings/media/video-interfaces.txt. The first > port > +should be the input for mixer0 mux. The second should be the output for > that > +mux. Third port should be input for mixer1 mux. Fourth port should be > output > +for mixer1 mux. Fifth port should be input for HDMI mux. Sixth port > should > +be output for it. All output endpoints should have reg property with the > id > +of the target TCON. All ports should have only one enpoint connected to ^ endpoint I guess it would me more readable if you were to make it a bullet list, but this works for me otherwise. Thanks! Maxime -- Maxime Ripard, Bootlin (formerly Free Electrons) Embedded Linux and Kernel engineering https://bootlin.com signature.asc Description: PGP signature ___ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel
[PATCH v2 04/27] dt-bindings: display: sunxi-drm: Add TCON TOP description
TCON TOP main purpose is to configure whole display pipeline. It determines relationships between mixers and TCONs, selects source TCON for HDMI, muxes LCD and TV encoder GPIO output, selects TV encoder clock source and contains additional TV TCON and DSI gates. Signed-off-by: Jernej Skrabec --- .../bindings/display/sunxi/sun4i-drm.txt | 45 +++ include/dt-bindings/clock/sun8i-tcon-top.h| 11 + 2 files changed, 56 insertions(+) create mode 100644 include/dt-bindings/clock/sun8i-tcon-top.h diff --git a/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt b/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt index 3346c1e2a7a0..ef64c589a4b3 100644 --- a/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt +++ b/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt @@ -187,6 +187,51 @@ And on the A23, A31, A31s and A33, you need one more clock line: - 'lvds-alt': An alternative clock source, separate from the TCON channel 0 clock, that can be used to drive the LVDS clock +TCON TOP + + +TCON TOPs main purpose is to configure whole display pipeline. It determines +relationships between mixers and TCONs, selects source TCON for HDMI, muxes +LCD and TV encoder GPIO output, selects TV encoder clock source and contains +additional TV TCON and DSI gates. + +It allows display pipeline to be configured in very different ways: + + / LCD0/LVDS0 + / TCON-LCD0 + | \ MIPI DSI + mixer0 | +\/ TCON-LCD1 - LCD1/LVDS1 + TCON-TOP +/\ TCON-TV0 - TVE0/RGB + mixer1 | \ + | TCON-TOP - HDMI + | / + \ TCON-TV1 - TVE1/RGB + +Note that both TCON TOP references same physical unit. + +Required properties: + - compatible: value must be one of: +* allwinner,sun8i-r40-tcon-top + - reg: base address and size of the memory-mapped region. + - clocks: phandle to the clocks feeding the TCON TOP +* bus: TCON TOP interface clock + - clock-names: clock name mentioned above + - resets: phandle to the reset line driving the DRC +* rst: TCON TOP reset line + - reset-names: reset name mentioned above + - #clock-cells : must contain 1 + +- ports: A ports node with endpoint definitions as defined in +Documentation/devicetree/bindings/media/video-interfaces.txt. The first port +should be the input for mixer0 mux. The second should be the output for that +mux. Third port should be input for mixer1 mux. Fourth port should be output +for mixer1 mux. Fifth port should be input for HDMI mux. Sixth port should +be output for it. All output endpoints should have reg property with the id +of the target TCON. All ports should have only one enpoint connected to +remote endpoint. + DRC --- diff --git a/include/dt-bindings/clock/sun8i-tcon-top.h b/include/dt-bindings/clock/sun8i-tcon-top.h new file mode 100644 index ..c05e92770402 --- /dev/null +++ b/include/dt-bindings/clock/sun8i-tcon-top.h @@ -0,0 +1,11 @@ +/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ +/* Copyright (C) 2018 Jernej Skrabec */ + +#ifndef _DT_BINDINGS_CLOCK_SUN8I_TCON_TOP_H_ +#define _DT_BINDINGS_CLOCK_SUN8I_TCON_TOP_H_ + +#define CLK_BUS_TCON_TOP_DSI 0 +#define CLK_BUS_TCON_TOP_TV0 1 +#define CLK_BUS_TCON_TOP_TV1 2 + +#endif /* _DT_BINDINGS_CLOCK_SUN8I_TCON_TOP_H_ */ -- 2.17.1 ___ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel
