Re: [PATCH v3 6/7] arm: dts: sun8i: a33: Add the DSI-related nodes
Hi, On Thu, Mar 22, 2018 at 10:23:32AM +0800, Chen-Yu Tsai wrote: > On Tue, Mar 6, 2018 at 9:56 PM, Maxime Ripard> wrote: > > From: Maxime Ripard > > > > The A33 has a MIPI-DSI block, along with its D-PHY. Let's add it in order > > to use it in the relevant boards. > > > > Signed-off-by: Maxime Ripard > > --- > > arch/arm/boot/dts/sun8i-a33.dtsi | 44 +- > > 1 file changed, 44 insertions(+) > > > > diff --git a/arch/arm/boot/dts/sun8i-a33.dtsi > > b/arch/arm/boot/dts/sun8i-a33.dtsi > > index 50eb84fa246a..94cfa7b1bbfa 100644 > > --- a/arch/arm/boot/dts/sun8i-a33.dtsi > > +++ b/arch/arm/boot/dts/sun8i-a33.dtsi > > @@ -236,6 +236,11 @@ > > #address-cells = <1>; > > #size-cells = <0>; > > reg = <1>; > > + > > + tcon0_out_dsi0: endpoint@1 { > > + reg = <1>; > > + remote-endpoint = > > <_in_tcon0>; > > + }; > > }; > > }; > > }; > > @@ -280,6 +285,45 @@ > > #io-channel-cells = <0>; > > }; > > > > + dsi0: dsi@1ca { > > Nit: There's only one so you don't need the numbered suffix. I'll fix it. > Also, is "dsi" specific enough, or should we use "mipi-dsi" If we were to be pedantic about it, that would even be MIPI-DSI2, but I'm not sure it's worth it to be honest. > > + compatible = "allwinner,sun6i-a31-mipi-dsi"; > > + reg = <0x01ca 0x1000>; > > + interrupts = ; > > + clocks = < CLK_BUS_MIPI_DSI>, > > +< CLK_DSI_SCLK>; > > + clock-names = "bus", "mod"; > > + resets = < RST_BUS_MIPI_DSI>; > > + phys = <>; > > + phy-names = "dphy"; > > + status = "disabled"; > > + > > + ports { > > + #address-cells = <1>; > > + #size-cells = <0>; > > + > > + port@0 { > > + #address-cells = <1>; > > + #size-cells = <0>; > > + reg = <0>; > > + > > + dsi0_in_tcon0: endpoint { > > + remote-endpoint = > > <_out_dsi0>; > > + }; > > + }; > > + }; > > + }; > > + > > + dphy0: d-phy@1ca1000 { > > Same nit, and "dsi-phy" would be better. D-PHY is one of the MIPI standards that can be used with DSI, but it doesn't mean DSI-PHY. You also have C-PHY (that can be used with DSI as well) and M-PHY (than can be used with UniPro and CSI3). So, no, it really is a D-PHY controller :) Maxime -- Maxime Ripard, Bootlin (formerly Free Electrons) Embedded Linux and Kernel engineering https://bootlin.com signature.asc Description: PGP signature ___ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel
Re: [PATCH v3 6/7] arm: dts: sun8i: a33: Add the DSI-related nodes
On Tue, Mar 6, 2018 at 9:56 PM, Maxime Ripardwrote: > From: Maxime Ripard > > The A33 has a MIPI-DSI block, along with its D-PHY. Let's add it in order > to use it in the relevant boards. > > Signed-off-by: Maxime Ripard > --- > arch/arm/boot/dts/sun8i-a33.dtsi | 44 +- > 1 file changed, 44 insertions(+) > > diff --git a/arch/arm/boot/dts/sun8i-a33.dtsi > b/arch/arm/boot/dts/sun8i-a33.dtsi > index 50eb84fa246a..94cfa7b1bbfa 100644 > --- a/arch/arm/boot/dts/sun8i-a33.dtsi > +++ b/arch/arm/boot/dts/sun8i-a33.dtsi > @@ -236,6 +236,11 @@ > #address-cells = <1>; > #size-cells = <0>; > reg = <1>; > + > + tcon0_out_dsi0: endpoint@1 { > + reg = <1>; > + remote-endpoint = > <_in_tcon0>; > + }; > }; > }; > }; > @@ -280,6 +285,45 @@ > #io-channel-cells = <0>; > }; > > + dsi0: dsi@1ca { Nit: There's only one so you don't need the numbered suffix. Also, is "dsi" specific enough, or should we use "mipi-dsi" > + compatible = "allwinner,sun6i-a31-mipi-dsi"; > + reg = <0x01ca 0x1000>; > + interrupts = ; > + clocks = < CLK_BUS_MIPI_DSI>, > +< CLK_DSI_SCLK>; > + clock-names = "bus", "mod"; > + resets = < RST_BUS_MIPI_DSI>; > + phys = <>; > + phy-names = "dphy"; > + status = "disabled"; > + > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + > + port@0 { > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <0>; > + > + dsi0_in_tcon0: endpoint { > + remote-endpoint = > <_out_dsi0>; > + }; > + }; > + }; > + }; > + > + dphy0: d-phy@1ca1000 { Same nit, and "dsi-phy" would be better. Otherwise, Reviewed-by: Chen-Yu Tsai > + compatible = "allwinner,sun6i-a31-mipi-dphy"; > + reg = <0x01ca1000 0x1000>; > + clocks = < CLK_BUS_MIPI_DSI>, > +< CLK_DSI_DPHY>; > + clock-names = "bus", "mod"; > + resets = < RST_BUS_MIPI_DSI>; > + status = "disabled"; > + #phy-cells = <0>; > + }; > + > fe0: display-frontend@1e0 { > compatible = "allwinner,sun8i-a33-display-frontend"; > reg = <0x01e0 0x2>; > -- > git-series 0.9.1 ___ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel
[PATCH v3 6/7] arm: dts: sun8i: a33: Add the DSI-related nodes
From: Maxime RipardThe A33 has a MIPI-DSI block, along with its D-PHY. Let's add it in order to use it in the relevant boards. Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun8i-a33.dtsi | 44 +- 1 file changed, 44 insertions(+) diff --git a/arch/arm/boot/dts/sun8i-a33.dtsi b/arch/arm/boot/dts/sun8i-a33.dtsi index 50eb84fa246a..94cfa7b1bbfa 100644 --- a/arch/arm/boot/dts/sun8i-a33.dtsi +++ b/arch/arm/boot/dts/sun8i-a33.dtsi @@ -236,6 +236,11 @@ #address-cells = <1>; #size-cells = <0>; reg = <1>; + + tcon0_out_dsi0: endpoint@1 { + reg = <1>; + remote-endpoint = <_in_tcon0>; + }; }; }; }; @@ -280,6 +285,45 @@ #io-channel-cells = <0>; }; + dsi0: dsi@1ca { + compatible = "allwinner,sun6i-a31-mipi-dsi"; + reg = <0x01ca 0x1000>; + interrupts = ; + clocks = < CLK_BUS_MIPI_DSI>, +< CLK_DSI_SCLK>; + clock-names = "bus", "mod"; + resets = < RST_BUS_MIPI_DSI>; + phys = <>; + phy-names = "dphy"; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + dsi0_in_tcon0: endpoint { + remote-endpoint = <_out_dsi0>; + }; + }; + }; + }; + + dphy0: d-phy@1ca1000 { + compatible = "allwinner,sun6i-a31-mipi-dphy"; + reg = <0x01ca1000 0x1000>; + clocks = < CLK_BUS_MIPI_DSI>, +< CLK_DSI_DPHY>; + clock-names = "bus", "mod"; + resets = < RST_BUS_MIPI_DSI>; + status = "disabled"; + #phy-cells = <0>; + }; + fe0: display-frontend@1e0 { compatible = "allwinner,sun8i-a33-display-frontend"; reg = <0x01e0 0x2>; -- git-series 0.9.1 ___ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel