I have tested these changes on an ili9486-based display connected through SPI
to a raspberry pi and can confirm they work in combination with another patch
I'll send shortly. I only had to fix the reset pin polarity in the device tree
overlay I used.
Regards, Jan
On July 11, 2019, 8:31 a.m.,
Typically gpiod_set_value calls would assert the reset line and
then release it using the symantics of:
gpiod_set_value(par->gpio.reset, 0);
... delay
gpiod_set_value(par->gpio.reset, 1);
And the gpio binding would specify the polarity.
Prior to conversion to gpiod calls
