Re: [PATCH v2 0/4] drm/bridge: dw-hdmi: Add support for HDR metadata

2019-10-10 Thread Neil Armstrong
On 07/10/2019 21:19, Jonas Karlman wrote:
> Add support for HDR metadata using the hdr_output_metadata connector property,
> configure Dynamic Range and Mastering InfoFrame accordingly.
> 
> A use_drm_infoframe flag is added to dw_hdmi_plat_data that platform drivers
> can use to signal when Dynamic Range and Mastering infoframes is supported.
> This flag is needed because Amlogic GXBB and GXL report same DW-HDMI version,
> and only GXL support DRM InfoFrame.
> 
> The first patch add functionality to configure DRM InfoFrame based on the
> hdr_output_metadata connector property.
> 
> The remaining patches sets the use_drm_infoframe flag on some SoCs supporting
> Dynamic Range and Mastering InfoFrame.
> 
> v2 has been runtime tested on a Rock64 (RK3328) and Rock Pi 4 (RK3399),
> only build tested for Amlogic and Allwinner.
> 
> Changes in v2:
>   * address comments from Andrzej Hajda
>   - renamed blob_equal to hdr_metadata_equal
>   - renamed drm_infoframe flag to use_drm_infoframe
>   - use hdmi_drm_infoframe_pack and a loop to write regs
>   - remove hdmi version check in hdmi_config_drm_infoframe
> 
> Jonas Karlman (4):
>   drm/bridge: dw-hdmi: Add Dynamic Range and Mastering InfoFrame support
>   drm/rockchip: Enable DRM InfoFrame support on RK3328 and RK3399
>   drm/meson: Enable DRM InfoFrame support on GXL, GXM and G12A
>   drm/sun4i: Enable DRM InfoFrame support on H6
> 
>  drivers/gpu/drm/bridge/synopsys/dw-hdmi.c   | 81 +
>  drivers/gpu/drm/bridge/synopsys/dw-hdmi.h   | 37 ++
>  drivers/gpu/drm/meson/meson_dw_hdmi.c   |  5 ++
>  drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c |  2 +
>  drivers/gpu/drm/sun4i/sun8i_dw_hdmi.c   |  2 +
>  drivers/gpu/drm/sun4i/sun8i_dw_hdmi.h   |  1 +
>  include/drm/bridge/dw_hdmi.h|  1 +
>  7 files changed, 129 insertions(+)
> 

Applied to drm-misc-next,

Thanks,
Neil


[PATCH v2 0/4] drm/bridge: dw-hdmi: Add support for HDR metadata

2019-10-07 Thread Jonas Karlman
Add support for HDR metadata using the hdr_output_metadata connector property,
configure Dynamic Range and Mastering InfoFrame accordingly.

A use_drm_infoframe flag is added to dw_hdmi_plat_data that platform drivers
can use to signal when Dynamic Range and Mastering infoframes is supported.
This flag is needed because Amlogic GXBB and GXL report same DW-HDMI version,
and only GXL support DRM InfoFrame.

The first patch add functionality to configure DRM InfoFrame based on the
hdr_output_metadata connector property.

The remaining patches sets the use_drm_infoframe flag on some SoCs supporting
Dynamic Range and Mastering InfoFrame.

v2 has been runtime tested on a Rock64 (RK3328) and Rock Pi 4 (RK3399),
only build tested for Amlogic and Allwinner.

Changes in v2:
  * address comments from Andrzej Hajda
  - renamed blob_equal to hdr_metadata_equal
  - renamed drm_infoframe flag to use_drm_infoframe
  - use hdmi_drm_infoframe_pack and a loop to write regs
  - remove hdmi version check in hdmi_config_drm_infoframe

Jonas Karlman (4):
  drm/bridge: dw-hdmi: Add Dynamic Range and Mastering InfoFrame support
  drm/rockchip: Enable DRM InfoFrame support on RK3328 and RK3399
  drm/meson: Enable DRM InfoFrame support on GXL, GXM and G12A
  drm/sun4i: Enable DRM InfoFrame support on H6

 drivers/gpu/drm/bridge/synopsys/dw-hdmi.c   | 81 +
 drivers/gpu/drm/bridge/synopsys/dw-hdmi.h   | 37 ++
 drivers/gpu/drm/meson/meson_dw_hdmi.c   |  5 ++
 drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c |  2 +
 drivers/gpu/drm/sun4i/sun8i_dw_hdmi.c   |  2 +
 drivers/gpu/drm/sun4i/sun8i_dw_hdmi.h   |  1 +
 include/drm/bridge/dw_hdmi.h|  1 +
 7 files changed, 129 insertions(+)

-- 
2.17.1