http://bugzilla.kernel.org/show_bug.cgi?id=5784
Summary: savage DRI: kernel oops when running glxgears in second
X.org session
Kernel Version: 2.6.15-rc6
Status: NEW
Severity: high
Owner: [EMAIL PROTECTED]
Submitter: [EMAIL PROTECTED]
Distribution:
Fedora Core 4
Machine has a ProSavage chipset on-board. The output of the corresponding
devices
by /sbin/lspci is:
00:01.0 PCI bridge: VIA Technologies, Inc. VT8633 [Apollo Pro266 AGP]
01:00.0 VGA compatible controller: S3 Inc. VT8375 [ProSavage8 KM266/KL266]
Test program is glxgears, built from patched X.org CVS with savage DRM support.
Execution of glxgears in first X session runs OK. If the first X session is
terminated (for any reason), and a second one is started, execution of the same
program, glxgears (or any OpenGL client) systematically crashes with a
segmentation
fault.
When output of dmesg is examined, the following shows up in the kernel log:
Unable to handle kernel paging request at virtual address 00010001
printing eip:
deaaeadd
*pde = 00000000
Oops: 0002 [#1]
PREEMPT
Modules linked in: savage drm ipv6 lp autofs4 af_packet p4_clockmod
speedstep_lib binfmt_misc nls_cp437 vfat fat thermal processor fan button
battery ac uhci_hcd ehci_hcd parport_pc parport via_agp agpgart i2c_viapro
snd_via82xx_modem snd_via82xx gameport snd_ac97_codec snd_ac97_bus snd_seq_dummy
snd_seq_oss snd_seq_midi_event snd_seq snd_pcm_oss snd_mixer_oss snd_pcm
snd_timer snd_page_alloc snd_mpu401_uart snd_rawmidi snd_seq_device snd
soundcore via_rhine mii floppy ide_cd cdrom usbcore ext3 jbd
CPU: 0
EIP: 0060:[<deaaeadd>] Not tainted VLI
EFLAGS: 00210246 (2.6.15-rc6)
EIP is at savage_dma_flush+0x13d/0x27b [savage]
eax: 00010001 ebx: 0000002e ecx: dd709000 edx: 001fffff
esi: dc730400 edi: e0000080 ebp: 00000000 esp: d4317ecc
ds: 007b es: 007b ss: 0068
Process glxgears (pid: 2572, threadinfo=d4316000 task=d3c08030)
Stack: 082d7d00 00000000 00000000 00000000 00000002 08085460 dc730400 00000001
00000000 deab2132 da1fb800 00000000 08087590 082d7cf8 00000013 080853c8
00000013 00000000 00000000 08087590 00010000 00000000 082d7cf8 00000001
Call Trace:
[<deab2132>] savage_bci_cmdbuf+0x323/0x3a9 [savage]
[<deab1e0f>] savage_bci_cmdbuf+0x0/0x3a9 [savage]
[<deabb82a>] drm_ioctl+0x11a/0x15b [drm]
[<c0158c13>] do_ioctl+0x47/0x5d
[<c0158e7a>] vfs_ioctl+0x16c/0x17e
[<c0158ed2>] sys_ioctl+0x46/0x60
[<c0102b79>] syscall_call+0x7/0xb
Code: 89 f8 0b 46 3c 50 68 52 23 ab de 68 c0 28 ab de e8 fc 7f 66 e1 83 c4 10 ba
03 00 00 00 89 f0 ff 96 2c 01 00 00 8b 86 d0 00 00 00 <c7> 00 51 00 01 96 0b 7e
3c 89 78 04 d1 eb 8d 53 ff 81 ca 00 00
Keywords: savage drm dri opengl kernel oops
Kernel version: Linux version 2.6.15-rc6 ([EMAIL PROTECTED]) (gcc
versión 4.0.2 20051125 (Red Hat 4.0.2-8)) #1 PREEMPT Sat Dec 24 18:18:11 ECT
2005
Way to reproduce:
1) Compile X.org with savage DRI support
2) Start said X server
3) Run glxgears. Program runs normally
4) Shut down X server
5) Start a new instance of the same X server
6) Run glxgears again. Program crashes with kernel oops
Output of ver_linux:
If some fields are empty or look unusual you may have an old version.
Compare to the current minimal requirements in Documentation/Changes.
Linux karlalex.palosanto.com 2.6.15-rc6 #1 PREEMPT Sat Dec 24 18:18:11 ECT 2005
i686 i686 i386 GNU/Linux
Gnu C 4.0.2
Gnu make 3.80
binutils 2.15.94.0.2.2
util-linux 2.12p
mount 2.12p
module-init-tools 3.1
e2fsprogs 1.38
reiserfsprogs line
reiser4progs line
pcmcia-cs 3.2.8
quota-tools 3.12.
PPP 2.4.2
nfs-utils 1.0.7
Linux C Library 2.3.5
Dynamic linker (ldd) 2.3.5
Procps 3.2.5
Net-tools 1.60
Kbd 1.12
Sh-utils 5.2.1
udev 058
Modules Loaded savage drm ipv6 lp autofs4 af_packet p4_clockmod
speedstep_lib binfmt_misc nls_cp437 vfat fat thermal processor fan button
battery ac uhci_hcd ehci_hcd parport_pc parport via_agp agpgart i2c_viapro
snd_via82xx_modem snd_via82xx gameport snd_ac97_codec snd_ac97_bus snd_seq_dummy
snd_seq_oss snd_seq_midi_event snd_seq snd_pcm_oss snd_mixer_oss snd_pcm
snd_timer snd_page_alloc snd_mpu401_uart snd_rawmidi snd_seq_device snd
soundcore via_rhine mii floppy ide_cd cdrom usbcore ext3 jbd
/proc/cpuinfo:
processor : 0
vendor_id : GenuineIntel
cpu family : 15
model : 1
model name : Intel(R) Pentium(R) 4 CPU 1.70GHz
stepping : 2
cpu MHz : 425.219
cache size : 256 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov
pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm
bogomips : 3402.00
/proc/modules:
savage 30976 1 - Live 0xdeaae000
drm 64404 2 savage, Live 0xdeab8000
ipv6 224384 10 - Live 0xdeae4000
lp 10692 0 - Live 0xdea9f000
autofs4 17924 2 - Live 0xdea99000
af_packet 20488 0 - Live 0xdea92000
p4_clockmod 5128 0 - Live 0xdea37000
speedstep_lib 4864 1 p4_clockmod, Live 0xdea2e000
binfmt_misc 11016 1 - Live 0xdea33000
nls_cp437 5888 3 - Live 0xdea1d000
vfat 12160 3 - Live 0xde9fe000
fat 46364 1 vfat, Live 0xdea3d000
thermal 13448 0 - Live 0xdea29000
processor 22976 1 thermal, Live 0xdea22000
fan 4868 0 - Live 0xdea17000
button 6672 0 - Live 0xdea02000
battery 9604 0 - Live 0xde928000
ac 4868 0 - Live 0xde9fb000
uhci_hcd 28816 0 - Live 0xdea0e000
ehci_hcd 29704 0 - Live 0xdea05000
parport_pc 36676 1 - Live 0xde9ca000
parport 32840 2 lp,parport_pc, Live 0xde9f1000
via_agp 9472 1 - Live 0xde924000
agpgart 31304 2 drm,via_agp, Live 0xde9d5000
i2c_viapro 8084 0 - Live 0xde921000
snd_via82xx_modem 14344 5 - Live 0xde8d1000
snd_via82xx 26136 0 - Live 0xde8b1000
gameport 14472 1 snd_via82xx, Live 0xde8c6000
snd_ac97_codec 82848 2 snd_via82xx_modem,snd_via82xx, Live 0xde92c000
snd_ac97_bus 2304 1 snd_ac97_codec, Live 0xde843000
snd_seq_dummy 3844 0 - Live 0xde817000
snd_seq_oss 29184 0 - Live 0xde907000
snd_seq_midi_event 6784 1 snd_seq_oss, Live 0xde897000
snd_seq 45072 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event, Live 0xde8fa000
snd_pcm_oss 45600 0 - Live 0xde8ed000
snd_mixer_oss 16512 1 snd_pcm_oss, Live 0xde8c0000
snd_pcm 78472 6 snd_via82xx_modem,snd_via82xx,snd_ac97_codec,snd_pcm_oss, Live
0xde8d8000
snd_timer 22276 2 snd_seq,snd_pcm, Live 0xde8b9000
snd_page_alloc 9992 3 snd_via82xx_modem,snd_via82xx,snd_pcm, Live 0xde893000
snd_mpu401_uart 7168 1 snd_via82xx, Live 0xde890000
snd_rawmidi 23072 1 snd_mpu401_uart, Live 0xde8aa000
snd_seq_device 8204 4 snd_seq_dummy,snd_seq_oss,snd_seq,snd_rawmidi, Live
0xde88c000
snd 49508 20
snd_via82xx_modem,snd_via82xx,snd_ac97_codec,snd_seq_oss,snd_seq,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer,snd_mpu401_uart,snd_rawmidi,snd_seq_device,
Live 0xde89c000
soundcore 9440 1 snd, Live 0xde846000
via_rhine 21636 0 - Live 0xde885000
mii 5376 1 via_rhine, Live 0xde83e000
floppy 55108 0 - Live 0xde808000
ide_cd 36356 0 - Live 0xde831000
cdrom 33312 1 ide_cd, Live 0xde827000
usbcore 112388 3 uhci_hcd,ehci_hcd, Live 0xde868000
ext3 116744 1 - Live 0xde84a000
jbd 51348 1 ext3, Live 0xde819000
/proc/ioports:
0000-001f : dma1
0020-0021 : pic1
0040-0043 : timer0
0050-0053 : timer1
0060-006f : keyboard
0070-0077 : rtc
0080-008f : dma page reg
00a0-00a1 : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : ide1
01f0-01f7 : ide0
0376-0376 : ide1
0378-037a : parport0
03c0-03df : vga+
03f6-03f6 : ide0
03f8-03ff : serial
0400-040f : 0000:00:11.0
0400-0407 : vt596_smbus
0800-087f : 0000:00:11.0
0800-0803 : PM1a_EVT_BLK
0804-0805 : PM1a_CNT_BLK
0808-080b : PM_TMR
0810-0815 : ACPI CPU throttle
0820-0823 : GPE0_BLK
0cf8-0cff : PCI conf1
cc00-ccff : 0000:00:12.0
cc00-ccff : via-rhine
d000-d0ff : 0000:00:11.5
d000-d0ff : VIA8233
d400-d4ff : 0000:00:11.6
d400-d4ff : VIA82XX-MODEM
d800-d81f : 0000:00:10.0
d800-d81f : uhci_hcd
dc00-dc1f : 0000:00:10.1
dc00-dc1f : uhci_hcd
e000-e01f : 0000:00:10.2
e000-e01f : uhci_hcd
e400-e407 : 0000:00:0b.0
e800-e807 : 0000:00:0b.0
e800-e802 : parport1
e803-e807 : parport1
ec00-ec1f : 0000:00:0b.0
ec00-ec07 : serial
ec08-ec0f : serial
fc00-fc0f : 0000:00:11.1
fc00-fc07 : ide0
fc08-fc0f : ide1
/proc/iomem:
00000000-0009fbff : System RAM
0009fc00-0009ffff : reserved
000a0000-000bffff : Video RAM area
000c0000-000cbfff : Video ROM
000f0000-000fffff : System ROM
00100000-1dfeffff : System RAM
00100000-00280142 : Kernel code
00280143-00319c03 : Kernel data
1dff0000-1dff7fff : ACPI Tables
1dff8000-1dffffff : ACPI Non-volatile Storage
cfb00000-dfbfffff : PCI Bus #01
d0000000-d7ffffff : 0000:01:00.0
dfd00000-dfefffff : PCI Bus #01
dfe70000-dfe7ffff : 0000:01:00.0
dfe80000-dfefffff : 0000:01:00.0
dffffe00-dffffeff : 0000:00:12.0
dffffe00-dffffeff : via-rhine
dfffff00-dfffffff : 0000:00:10.3
dfffff00-dfffffff : ehci_hcd
e0000000-e3ffffff : 0000:00:00.0
fec00000-fec00fff : reserved
fee00000-fee00fff : reserved
fff80000-ffffffff : reserved
/sbin/lspci -vvv:
00:00.0 Host bridge: VIA Technologies, Inc. P4M266 Host Bridge
Subsystem: VIA Technologies, Inc.: Unknown device 0000
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping-
SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort-
<MAbort+ >SERR- <PERR-
Latency: 8
Region 0: Memory at e0000000 (32-bit, prefetchable) [size=64M]
Capabilities: [a0] AGP version 2.0
Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans-
64bit- FW- AGP3-
Rate=x1,x2,x4
Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP+ GART64- 64bit- FW-
Rate=<none>
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:01.0 PCI bridge: VIA Technologies, Inc. VT8633 [Apollo Pro266 AGP] (prog-if
00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping-
SERR+ FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort-
<MAbort+ >SERR- <PERR+
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: dfd00000-dfefffff
Prefetchable memory behind bridge: cfb00000-dfbfffff
Secondary status: 66Mhz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0b.0 Serial controller: Timedia Technology Co Ltd PCI2S550 (Dual 16550 UART)
(rev 01) (prog-if 02 [16550])
Subsystem: Timedia Technology Co Ltd: Unknown device 5079
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping+
SERR+ FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort-
<MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at ec00 [size=32]
Region 2: I/O ports at e800 [size=8]
Region 3: I/O ports at e400 [size=8]
00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
(rev 80) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping-
SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort-
<MAbort- >SERR- <PERR-
Latency: 32, Cache Line Size 08
Interrupt: pin A routed to IRQ 11
Region 4: I/O ports at d800 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
(rev 80) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping-
SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort-
<MAbort- >SERR- <PERR-
Latency: 32, Cache Line Size 08
Interrupt: pin B routed to IRQ 5
Region 4: I/O ports at dc00 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
(rev 80) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping-
SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort-
<MAbort- >SERR- <PERR-
Latency: 32, Cache Line Size 08
Interrupt: pin C routed to IRQ 5
Region 4: I/O ports at e000 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:10.3 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 82) (prog-if 20
[EHCI])
Subsystem: VIA Technologies, Inc. USB 2.0
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping-
SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort-
<MAbort- >SERR- <PERR-
Latency: 32, Cache Line Size 20
Interrupt: pin D routed to IRQ 11
Region 0: Memory at dfffff00 (32-bit, non-prefetchable) [size=256]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:11.0 ISA bridge: VIA Technologies, Inc. VT8235 ISA Bridge
Subsystem: VIA Technologies, Inc.: Unknown device 0000
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping+
SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort-
<MAbort- >SERR- <PERR-
Latency: 0
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:11.1 IDE interface: VIA Technologies, Inc.
VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06) (prog-if 8a
[Master SecP PriP])
Subsystem: VIA Technologies, Inc.
VT82C586/B/VT82C686/A/B/VT8233/A/C/VT8235
PIPC Bus Master IDE
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping-
SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort-
<MAbort- >SERR- <PERR-
Latency: 32
Interrupt: pin A routed to IRQ 255
Region 4: I/O ports at fc00 [size=16]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237
AC97 Audio Controller (rev 50)
Subsystem: VIA Technologies, Inc. K7VT2 motherboard
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping-
SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort-
<MAbort- >SERR- <PERR-
Interrupt: pin C routed to IRQ 5
Region 0: I/O ports at d000 [size=256]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:11.6 Communication controller: VIA Technologies, Inc. AC'97 Modem Controller
(rev 80)
Subsystem: VIA Technologies, Inc.: Unknown device 4161
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping-
SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort-
<MAbort- >SERR- <PERR-
Interrupt: pin C routed to IRQ 5
Region 0: I/O ports at d400 [size=256]
Capabilities: [d0] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 74)
Subsystem: VIA Technologies, Inc. VT6102 [Rhine II] Embeded Ethernet
Controller
on VT8235
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping-
SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort-
<MAbort- >SERR- <PERR-
Latency: 32 (750ns min, 2000ns max), Cache Line Size 08
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at cc00 [size=256]
Region 1: Memory at dffffe00 (32-bit, non-prefetchable) [size=256]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
01:00.0 VGA compatible controller: S3 Inc. VT8375 [ProSavage8 KM266/KL266]
(prog-if 00 [VGA])
Subsystem: S3 Inc. VT8375 [ProSavage8 KM266/KL266]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping-
SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort-
<MAbort- >SERR- <PERR-
Latency: 32 (1000ns min, 63750ns max), Cache Line Size 08
Interrupt: pin A routed to IRQ 11
Region 0: Memory at dfe80000 (32-bit, non-prefetchable) [size=512K]
Region 1: Memory at d0000000 (32-bit, prefetchable) [size=128M]
Expansion ROM at dfe70000 [disabled] [size=64K]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [80] AGP version 2.0
Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA- ITACoh- GART64- HTrans-
64bit- FW- AGP3-
Rate=x4
Command: RQ=32 ArqSz=0 Cal=0 SBA- AGP+ GART64- 64bit- FW-
Rate=x4
------- You are receiving this mail because: -------
You are the assignee for the bug, or are watching the assignee.
-------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc. Do you grep through log files
for problems? Stop! Download the new AJAX search engine that makes
searching your log files as easy as surfing the web. DOWNLOAD SPLUNK!
http://ads.osdn.com/?ad_id=7637&alloc_id=16865&op=click
--
_______________________________________________
Dri-devel mailing list
Dri-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/dri-devel
