Re: [PATCH] drm: edid: add support for E-DDC

2012-08-21 Thread Shirish S
Hello Daniel, On Tue, Aug 21, 2012 at 4:18 AM, Daniel Vetter dan...@ffwll.ch wrote: On Tue, Aug 21, 2012 at 9:10 AM, Shirish S s.shir...@samsung.com wrote: The current logic for probing ddc is limited to 2 blocks (256 bytes), this patch adds support for the 4 block (512) data. To do

Re: [PATCH] drm: edid: add support for E-DDC

2012-08-21 Thread Shirish S
On Tue, Aug 21, 2012 at 7:56 AM, Ville Syrjälä ville.syrj...@linux.intel.com wrote: On Tue, Aug 21, 2012 at 06:55:53AM -0700, Shirish S wrote: Hello Ville Syrjälä, On Tue, Aug 21, 2012 at 4:26 AM, Ville Syrjälä ville.syrj...@linux.intel.com wrote: On Tue, Aug 21, 2012 at 12:40

[PATCH] drm/exynos: Update the MAX_EDID value for E-DDC

2012-08-22 Thread Shirish S
From: Shirish Shankarappa s.shir...@samsung.com The value of MAX_EDID is now valid only for 2 block EDID data which is 256, but to support 4 block EDID (E-DDC) this needs to be 512. Signed-off-by: Shirish Shankarappa s.shir...@samsung.com --- drivers/gpu/drm/exynos/exynos_drm_connector.c |

[PATCH] Update MAX_EDID value in exynos

2012-08-22 Thread Shirish S
From: Shirish Shankarappa s.shir...@samsung.com The value of MAX_EDID is now valid only for 2 block EDID data which is 256, but to support 4 block EDID (E-DDC) this needs to be 512. Based on drm-next branch Shirish Shankarappa (1): drm/exynos: Update the MAX_EDID value for E-DDC

[PATCH V2] drm: edid: add support for E-DDC

2012-08-22 Thread Shirish S
From: Shirish Shankarappa s.shir...@samsung.com This patch adds support in probing 4 block edid data, for E-DDC. This is the first test case in CTS, for HDMI compliance. Changes from V1: 1. Data type of offset adress updated to unsigned short 2. Updated the buf feild of msg[0] Based on drm-next

[PATCH V2] drm: edid: add support for E-DDC

2012-08-22 Thread Shirish S
From: Shirish Shankarappa s.shir...@samsung.com The current logic for probing ddc is limited to 2 blocks (256 bytes), this patch adds support for the 4 block (512) data. To do this, a single 8-bit segment index is passed to the display via the I2C address 30h. Data from the selected segment is

[PATCH V2] drm: edid: add support for E-DDC

2012-08-22 Thread Shirish S
using a repeated I2C 'START' signal. Signed-off-by: Shirish S s.shir...@samsung.com --- drivers/gpu/drm/drm_edid.c | 19 +-- 1 files changed, 13 insertions(+), 6 deletions(-) diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c index a8743c3..33a3888 100644

Re: [PATCH] drm/exynos: Update the MAX_EDID value for E-DDC

2012-08-23 Thread Shirish S
Hello, On Thu, Aug 23, 2012 at 2:52 AM, 김승우 sw0312@samsung.com wrote: Hi Daniel, On 2012년 08월 23일 17:50, Daniel Vetter wrote: On Wed, Aug 22, 2012 at 06:53:33PM +0530, Shirish S wrote: From: Shirish Shankarappa s.shir...@samsung.com The value of MAX_EDID is now valid only for 2

Re: [PATCH] drm: edid: add support for E-DDC

2012-08-23 Thread Shirish S
Hello Ville, On Wed, Aug 22, 2012 at 12:52 AM, Ville Syrjälä ville.syrj...@linux.intel.com wrote: On Tue, Aug 21, 2012 at 04:28:20PM -0700, Shirish S wrote: On Tue, Aug 21, 2012 at 7:56 AM, Ville Syrjälä ville.syrj...@linux.intel.com wrote: On Tue, Aug 21, 2012 at 06:55:53AM -0700

Re: [PATCH] drm: edid: add support for E-DDC

2012-08-23 Thread Shirish S
Hello Daniel, On Thu, Aug 23, 2012 at 1:54 AM, Daniel Vetter dan...@ffwll.ch wrote: On Wed, Aug 22, 2012 at 10:52:26AM +0300, Ville Syrjälä wrote: On Tue, Aug 21, 2012 at 04:28:20PM -0700, Shirish S wrote: On Tue, Aug 21, 2012 at 7:56 AM, Ville Syrjälä ville.syrj...@linux.intel.com

Re: [PATCH] drm: edid: add support for E-DDC

2012-08-23 Thread Shirish S
Small clarification: On Thu, Aug 23, 2012 at 4:23 PM, Daniel Vetter dan...@ffwll.ch wrote: On Thu, Aug 23, 2012 at 07:06:53AM -0700, Shirish S wrote: Hello Daniel, On Thu, Aug 23, 2012 at 1:54 AM, Daniel Vetter dan...@ffwll.ch wrote: On Wed, Aug 22, 2012 at 10:52:26AM +0300, Ville

[PATCH V3] drm: edid: add support for E-DDC

2012-08-24 Thread Shirish S
This patch adds support in probing 4 block edid data, for E-DDC. This is the first test case in CTS, for HDMI compliance. Changes from V2: Add switch for DDC and E-DDC Based on drm-next branch Shirish S (1): drm: edid: add support for E-DDC drivers/gpu/drm/drm_edid.c | 87

[PATCH V3] drm: edid: add support for E-DDC

2012-08-24 Thread Shirish S
using a repeated I2C 'START' signal. Signed-off-by: Shirish S s.shir...@samsung.com --- drivers/gpu/drm/drm_edid.c | 83 --- 1 files changed, 62 insertions(+), 21 deletions(-) diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c index

[PATCH V4] drm: edid: add support for E-DDC

2012-08-25 Thread Shirish S
This patch adds support in probing 4 block edid data, for E-DDC. This is the first test case in CTS, for HDMI compliance. Changes from V3: Remove switch,and avoid sending of segment data for non E-DDC Based on drm-next branch Shirish S (1): drm: edid: add support for E-DDC drivers/gpu/drm

[PATCH V4] drm: edid: add support for E-DDC

2012-08-25 Thread Shirish S
using a repeated I2C 'START' signal. Signed-off-by: Shirish S s.shir...@samsung.com --- drivers/gpu/drm/drm_edid.c | 22 ++ 1 files changed, 18 insertions(+), 4 deletions(-) diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c index a8743c3..cde7af0 100644

Re: [PATCH V4] drm: edid: add support for E-DDC

2012-08-29 Thread Shirish S
On Wed, Aug 29, 2012 at 4:08 AM, Ville Syrjälä ville.syrj...@linux.intel.com wrote: On Sat, Aug 25, 2012 at 03:13:56PM +0530, Shirish S wrote: The current logic for probing ddc is limited to 2 blocks (256 bytes), this patch adds support for the 4 block (512) data. To do this, a single

[PATCH V5] drm: edid: add support for E-DDC

2012-08-29 Thread Shirish S
This patch adds support in probing 4 block edid data, for E-DDC. This is the first test case in CTS, for HDMI compliance. Changes from V4: Fix review comments about space and comment indentation. Based on drm-next branch Shirish S (1): drm: edid: add support for E-DDC drivers/gpu/drm

[PATCH V5] drm: edid: add support for E-DDC

2012-08-29 Thread Shirish S
using a repeated I2C 'START' signal. Signed-off-by: Shirish S s.shir...@samsung.com --- drivers/gpu/drm/drm_edid.c | 22 +++--- 1 files changed, 19 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c index bcc4725..b9ffc30 100644

Re: [PATCH V5] drm: edid: add support for E-DDC

2012-08-29 Thread Shirish S
Thanks for the comments Daniel and Jean I will upload patch set 6. This shall include Jean's review coments. And i will tag Daniel,Jean and Ville as reviewed. Regards, Shirish S On Wed, Aug 29, 2012 at 9:12 AM, Daniel Vetter dan...@ffwll.ch wrote: On Wed, Aug 29, 2012 at 4:46 PM, Shirish S

Re: [PATCH V4] drm: edid: add support for E-DDC

2012-08-29 Thread Shirish S
. Your patch never checked for the 3 message transfer complete, it checked only 2. With the changes above applied, you can add: Reviewed-by: Jean Delvare jdelv...@suse.de Will add your review comments in patch set 5 and your reviewed tag. Thanks Regards, Shirish S -- Jean Delvare Suse L3

[PATCH V6] drm: edid: add support for E-DDC

2012-08-30 Thread Shirish S
: Remove switch,and avoid sending of segment data for non E-DDC Changes from V4: Fix review comments about space and comment indentation. Changes from V5: Compacted the code. Based on drm-next branch Shirish S (1): drm: edid: add support for E-DDC drivers/gpu/drm/drm_edid.c | 19

[PATCH V6] drm: edid: add support for E-DDC

2012-08-30 Thread Shirish S
using a repeated I2C 'START' signal. Signed-off-by: Shirish S s.shir...@samsung.com Reviewed-by: Jean Delvare jdelv...@suse.de Reviewed-by: Daniel Vetter daniel.vet...@ffwll.ch Reviewed-by: Ville Syrjala ville.syrj...@linux.intel.com --- drivers/gpu/drm/drm_edid.c | 19 --- 1

Re: [PATCH V6] drm: edid: add support for E-DDC

2012-08-30 Thread Shirish S
On Thu, Aug 30, 2012 at 3:58 AM, Ville Syrjälä ville.syrj...@linux.intel.com wrote: On Thu, Aug 30, 2012 at 12:34:06PM +0530, Shirish S wrote: @@ -276,15 +283,21 @@ drm_do_probe_ddc_edid(struct i2c_adapter *adapter, unsigned char *buf, .buf= buf

Re: [PATCH V6] drm: edid: add support for E-DDC

2012-09-03 Thread Shirish S
Hello Dave, My patch-set for adding support for 4 block EDID is now reviewed and ready. Please let me know if you want any further clarification Regards, Shirish S On Thu, Aug 30, 2012 at 12:04 AM, Shirish S s.shir...@samsung.com wrote: The current logic for probing ddc is limited to 2

Re: [PATCH V6] drm: edid: add support for E-DDC

2012-09-07 Thread Shirish S
Hi Dave, Gentle Reminder! This patch is required for passing the very first test case of HDMI Compliance test suite. Regards, Shirish S On Mon, Sep 3, 2012 at 8:54 AM, Shirish S shirish@gmail.com wrote: Hello Dave, My patch-set for adding support for 4 block EDID is now reviewed and ready

Re: [PATCH V6] drm: edid: add support for E-DDC

2012-09-08 Thread Shirish S
I have already sent him the sample he had asked for. Regards, Shirish S On Sat, Sep 8, 2012 at 3:35 AM, Dave Airlie airl...@gmail.com wrote: On Sat, Sep 8, 2012 at 3:30 AM, Shirish S shirish@gmail.com wrote: Hi Dave, Gentle Reminder! This patch is required for passing the very first

Re: [PATCH V6] drm: edid: add support for E-DDC

2012-09-08 Thread Shirish S
inline, anyways,thanks for the correction. Am Samstag, den 08.09.2012, 08:49 -0700 schrieb Shirish S: On Sat, Sep 8, 2012 at 3:35 AM, Dave Airlie airl...@gmail.com wrote: On Sat, Sep 8, 2012 at 3:30 AM, Shirish S shirish@gmail.com wrote: Hi Dave, Gentle Reminder

Re: [PATCH V6] drm: edid: add support for E-DDC

2012-09-13 Thread Shirish S
Gentle Reminder! On Mon, Sep 3, 2012 at 9:24 PM, Shirish S shirish@gmail.com wrote: Hello Dave, My patch-set for adding support for 4 block EDID is now reviewed and ready. Please let me know if you want any further clarification Regards, Shirish S On Thu, Aug 30, 2012 at 12:04 AM

[PATCH] drm/exynos: add check for the device power status

2013-01-23 Thread Shirish S
The hdmi and mixer win_commit calls currently are not checking the status of IP before updating the respective registers, this patch adds this check. Signed-off-by: Shirish S s.shir...@samsung.com --- drivers/gpu/drm/exynos/exynos_hdmi.c | 3 +++ drivers/gpu/drm/exynos/exynos_mixer.c | 3 +++ 2

Re: [PATCH] drm/exynos: add check for the device power status

2013-01-23 Thread Shirish S
On Wed, Jan 23, 2013 at 8:18 PM, Sean Paul seanp...@chromium.org wrote: On Wed, Jan 23, 2013 at 5:10 AM, Shirish S s.shir...@samsung.com wrote: The hdmi and mixer win_commit calls currently are not checking the status of IP before updating the respective registers, this patch adds

[PATCH] drm/exynos: add check for the device power status

2013-01-23 Thread Shirish S
V2: Add mutex protection, while read. The hdmi and mixer win_commit calls currently are not checking the status of IP before updating the respective registers, this patch adds this check. Signed-off-by: Shirish S s.shir...@samsung.com --- drivers/gpu/drm/exynos/exynos_hdmi.c | 7

[PATCH 0/3] Add dt support for exynos hdmiphy settings

2013-08-13 Thread Shirish S
as-is in the driver and hence we can find all the hex values, which are not logically explained similar to driver. Shirish S (3): ARM: dts: smdk5250: Add hdmi phy settings ARM: dts: arndale: Add hdmi phy settings drm: exynos: hdmi: Add dt support for hdmiphy settings .../devicetree/bindings/video

[PATCH 1/3] ARM: dts: smdk5250: Add hdmi phy settings

2013-08-13 Thread Shirish S
This patch moves the hdmi phy setting to smdk5250 dts,as its more of a per board configuration and also shall be easier for supporting future chipsets. Signed-off-by: Shirish S s.shir...@samsung.com --- arch/arm/boot/dts/exynos5250-smdk5250.dts | 120 + 1 file

[PATCH 2/3] ARM: dts: arndale: Add hdmi phy settings

2013-08-13 Thread Shirish S
This patch moves the hdmi phy setting to arndale dts, as its more of a per board configuration and also shall be easier for supporting future chipsets. Signed-off-by: Shirish S s.shir...@samsung.com --- arch/arm/boot/dts/exynos5250-arndale.dts | 120 ++ 1 file

[PATCH 3/3] drm: exynos: hdmi: Add dt support for hdmiphy settings

2013-08-13 Thread Shirish S
This patch adds dt support to hdmiphy config settings as it is board specific and depends on the signal pattern of board. Signed-off-by: Shirish S s.shir...@samsung.com --- .../devicetree/bindings/video/exynos_hdmi.txt | 18 +- drivers/gpu/drm/exynos/exynos_hdmi.c | 191

[PATCH 2/3] ARM: dts: arndale: Add hdmi phy settings

2013-08-13 Thread Shirish S
This patch moves the hdmi phy setting to arndale dts, as its more of a per board configuration and also shall be easier for supporting future chipsets. Signed-off-by: Shirish S s.shir...@samsung.com --- arch/arm/boot/dts/exynos5250-arndale.dts | 120 ++ 1 file

[PATCH 0/3] Add dt support for exynos hdmiphy settings

2013-08-13 Thread Shirish S
as-is in the driver and hence we can find all the hex values, which are not logically explained similar to driver. Shirish S (3): ARM: dts: smdk5250: Add hdmi phy settings ARM: dts: arndale: Add hdmi phy settings drm: exynos: hdmi: Add dt support for hdmiphy settings .../devicetree/bindings/video

[PATCH 1/3] ARM: dts: smdk5250: Add hdmi phy settings

2013-08-13 Thread Shirish S
This patch moves the hdmi phy setting to smdk5250 dts,as its more of a per board configuration and also shall be easier for supporting future chipsets. Signed-off-by: Shirish S s.shir...@samsung.com --- arch/arm/boot/dts/exynos5250-smdk5250.dts | 120 + 1 file

[PATCH 3/3] drm: exynos: hdmi: Add dt support for hdmiphy settings

2013-08-13 Thread Shirish S
This patch adds dt support to hdmiphy config settings as it is board specific and depends on the signal pattern of board. Signed-off-by: Shirish S s.shir...@samsung.com --- .../devicetree/bindings/video/exynos_hdmi.txt | 18 +- drivers/gpu/drm/exynos/exynos_hdmi.c | 191

[PATCH 0/3] Add dt support for exynos hdmiphy settings

2013-08-14 Thread Shirish S
as-is in the driver and hence we can find all the hex values, which are not logically explained similar to driver. Shirish S (3): ARM: dts: smdk5250: Add hdmi phy settings ARM: dts: arndale: Add hdmi phy settings drm: exynos: hdmi: Add dt support for hdmiphy settings .../devicetree/bindings/video

[PATCH 1/3] ARM: dts: smdk5250: Add hdmi phy settings

2013-08-14 Thread Shirish S
This patch moves the hdmi phy setting to smdk5250 dts,as its more of a per board configuration and also shall be easier for supporting future chipsets. Signed-off-by: Shirish S s.shir...@samsung.com --- arch/arm/boot/dts/exynos5250-smdk5250.dts | 120 + 1 file

[PATCH 2/3] ARM: dts: arndale: Add hdmi phy settings

2013-08-14 Thread Shirish S
This patch moves the hdmi phy setting to arndale dts, as its more of a per board configuration and also shall be easier for supporting future chipsets. Signed-off-by: Shirish S s.shir...@samsung.com --- arch/arm/boot/dts/exynos5250-arndale.dts | 120 ++ 1 file

[PATCH 3/3] drm: exynos: hdmi: Add dt support for hdmiphy settings

2013-08-14 Thread Shirish S
This patch adds dt support to hdmiphy config settings as it is board specific and depends on the signal pattern of board. Signed-off-by: Shirish S s.shir...@samsung.com --- .../devicetree/bindings/video/exynos_hdmi.txt | 18 +- drivers/gpu/drm/exynos/exynos_hdmi.c | 191

Re: [PATCH 1/7] drm/exynos: move hdmiphy related code to hdmiphy driver

2013-10-03 Thread Shirish S
; devicet...@vger.kernel.org; linux-samsung-soc; sw0312.kim; sunil joshi; dri-devel; kgene.kim; Shirish S; Sylwester Nawrocki; Rahul Sharma; Stephen Warren; Mark Rutland; Kumar Gala; Pawel Moll; Rob Herring; Sean Paul Subject: Re: [PATCH 1/7] drm/exynos: move hdmiphy related code to hdmiphy

[PATCH] drm/exynos: set the active aspect ratio as per mode

2014-03-10 Thread Shirish S
now that the drm_display_mode also provides aspect ratio for all resolutions, this patch adds its usage to set the active aspect ratio of AVI info frame packets as per CEA-861-D standard's Table 9. This is also needed to abide by the 7-27 compliance test of HDMI. Signed-off-by: Shirish S

[PATCH] drm/exynos: add phy settings for RB resolutions

2014-03-10 Thread Shirish S
to be detected in exynos5250. Signed-off-by: Shirish S --- drivers/gpu/drm/exynos/exynos_hdmi.c | 45 ++ 1 file changed, 45 insertions(+) diff --git a/drivers/gpu/drm/exynos/exynos_hdmi.c b/drivers/gpu/drm/exynos/exynos_hdmi.c index c021ddc..650ce48 100644

[PATCH] drm/exynos: set the active aspect ratio as per mode

2014-03-11 Thread Shirish S
, and made the orr'ing logic correct Signed-off-by: Shirish S --- drivers/gpu/drm/exynos/exynos_hdmi.c | 38 +++--- 1 file changed, 31 insertions(+), 7 deletions(-) diff --git a/drivers/gpu/drm/exynos/exynos_hdmi.c b/drivers/gpu/drm/exynos/exynos_hdmi.c index

[PATCH] drm/exynos: add hdmi power on/off sequence

2014-03-11 Thread Shirish S
This patch implements the power on/off sequence (and its dependant functions) of HDMI exynos5250 as provided by the hardware team. Signed-off-by: Shirish S --- drivers/gpu/drm/exynos/exynos_hdmi.c | 137 +- drivers/gpu/drm/exynos/regs-hdmi.h | 15 2

[PATCH] drm/exynos: add phy settings for RB resolutions

2014-03-12 Thread Shirish S
Hi Tomasz, Thanks for the review comments, On Wed, Mar 12, 2014 at 8:26 AM, Tomasz Figa wrote: > > Hi Shirish, > > > On 10.03.2014 15:17, Shirish S wrote: >> >> below is list of pixel clocks and resoluitons >> this patch adds: >> >> 7100

[PATCH] drm/exynos: set the active aspect ratio as per mode

2014-03-12 Thread Shirish S
Hi Tomasz, On Wed, Mar 12, 2014 at 8:19 AM, Tomasz Figa wrote: > Hi Shirish, > > > On 10.03.2014 04:44, Shirish S wrote: >> >> now that the drm_display_mode also provides aspect >> ratio for all resolutions, this patch adds its usage >> to set the active aspec

[PATCH] drm/exynos: add phy settings for RB resolutions

2014-03-13 Thread Shirish S
- 1680x1050 at 60Hz RB Signed-off-by: Shirish S --- V2: Incorporated review comments drivers/gpu/drm/exynos/exynos_hdmi.c | 45 ++ 1 file changed, 45 insertions(+) diff --git a/drivers/gpu/drm/exynos/exynos_hdmi.c b/drivers/gpu/drm/exynos/exynos_hdmi.c index

[PATCH] drm/exynos: set the active aspect ratio as per mode

2014-03-13 Thread Shirish S
Now that the drm_display_mode also provides aspect ratio for all resolutions, this patch adds its usage to set the active aspect ratio of AVI info frame packets as per CEA-861-D standard's Table 9. This is also needed to abide by the 7-27 compliance test of HDMI. Signed-off-by: Shirish S --- V2

[PATCH] drm/exynos: add phy settings for RB resolutions

2014-05-05 Thread Shirish S
Hi, Have posted a patch that updates the phy settings provided by our hardware team. For now support for 88.75 MHz is removed, will update it as and when i recieve and settings for that pixel clock. Regards, Shirish S On Wed, Apr 2, 2014 at 9:39 AM, Shirish S wrote: > Hi, > Kindl

[PATCH] drm/exynos: update phy settings for RB resolutions

2014-05-05 Thread Shirish S
-by: Shirish S --- drivers/gpu/drm/exynos/exynos_hdmi.c | 33 - 1 file changed, 12 insertions(+), 21 deletions(-) diff --git a/drivers/gpu/drm/exynos/exynos_hdmi.c b/drivers/gpu/drm/exynos/exynos_hdmi.c index 9a6d652..7f14faf 100644 --- a/drivers/gpu/drm/exynos

[PATCH] drm/exynos: restore core HDMI settings

2014-05-13 Thread Shirish S
Hi, On Wed, Feb 19, 2014 at 4:02 PM, Inki Dae wrote: > 2014-02-14 16:34 GMT+09:00 Shirish S : >> In DVI mode the video preamble and Guard band should >> be disabled whereas it should be applied in HDMI mode, >> the re-applying of preamble and guard band was missing, >>

[PATCH] drm/exynos: add phy settings for exynos5420

2014-05-23 Thread Shirish S
This patch adds phy settings of the below mentioned pixel clocks in Exynos5420: 85.5 MHz- 1366x768 at 60Hz 162 MHz - 1600x1200 at 60Hz Signed-off-by: Shirish S --- drivers/gpu/drm/exynos/exynos_hdmi.c | 18 ++ 1 file changed, 18 insertions(+) diff --git a/drivers/gpu

[PATCH 4/4] drm: exynos: hdmi: Add dt support for hdmiphy settings

2014-01-08 Thread Shirish S
Hi Tomasz, Thanks for the review comments, please find my replies inline. On Thu, Dec 19, 2013 at 6:49 PM, Tomasz Figa wrote: > On Thursday 19 of December 2013 17:42:28 Shirish S wrote: >> This patch adds dt support to hdmiphy config settings >> as it is board specific and depend

[PATCH] Enable probing of non-rb modes

2014-01-08 Thread Shirish S
in connectors probed modes and hence on running xrandr is not listed. V2: made drm_mode_std static Shirish S (1): drm: edid: enable probing and listing of non rb modes drivers/gpu/drm/drm_edid.c | 39 ++- 1 file changed, 18 insertions(+), 21 deletions

[PATCH] drm: edid: enable probing and listing of non rb modes

2014-01-08 Thread Shirish S
pixel clock is not supported but non-rb mode is supported. This patch changes the drm_mode_std mode selection to collect all the supported modes and not just one mode. Signed-off-by: Shirish S --- drivers/gpu/drm/drm_edid.c | 39 ++- 1 file changed, 18

[PATCH] drm/exynos: restore core HDMI settings

2014-02-14 Thread Shirish S
. Signed-off-by: Shirish S --- drivers/gpu/drm/exynos/exynos_hdmi.c |2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/gpu/drm/exynos/exynos_hdmi.c b/drivers/gpu/drm/exynos/exynos_hdmi.c index a0e10ae..a102076 100644 --- a/drivers/gpu/drm/exynos/exynos_hdmi.c +++ b/drivers/gpu/drm

[PATCH 2/3] ARM: dts: arndale: Add hdmi phy settings

2013-10-28 Thread Shirish S
This patch moves the hdmi phy setting to arndale dts, as its more of a per board configuration and also shall be easier for supporting future chipsets. Signed-off-by: Shirish S --- arch/arm/boot/dts/exynos5250-arndale.dts | 68 ++ 1 file changed, 68 insertions

[PATCH 2/3] ARM: dts: arndale: Add hdmi phy settings

2013-10-28 Thread Shirish S
This patch moves the hdmi phy setting to arndale dts, as its more of a per board configuration and also shall be easier for supporting future chipsets. Signed-off-by: Shirish S --- arch/arm/boot/dts/exynos5250-arndale.dts | 68 ++ 1 file changed, 68 insertions

[PATCH 0/4] Add dt support for exynos hdmiphy settings

2013-10-29 Thread Shirish S
registers. V3: Incorporated Mark Rutland's comments. V4: Rebased and included cros5250-common.dtsi. Shirish S (4): ARM: dts: smdk5250: Add hdmi phy settings ARM: dts: arndale: Add hdmi phy settings ARM: exynos: dts: cros5250: Add hdmi phy settings drm: exynos: hdmi: Add dt support

[PATCH 1/4] ARM: dts: smdk5250: Add hdmi phy settings

2013-10-29 Thread Shirish S
This patch moves the hdmi phy setting to smdk5250 dts,as its more of a per board configuration and also shall be easier for supporting future chipsets. Signed-off-by: Shirish S --- arch/arm/boot/dts/exynos5250-smdk5250.dts | 75 + 1 file changed, 75 insertions

[PATCH 4/4] drm: exynos: hdmi: Add dt support for hdmiphy settings

2013-10-29 Thread Shirish S
This patch adds dt support to hdmiphy config settings as it is board specific and depends on the signal pattern of board. Signed-off-by: Shirish S --- .../devicetree/bindings/video/exynos_hdmi.txt | 34 + drivers/gpu/drm/exynos/exynos_hdmi.c | 79

[PATCH 3/4] ARM: exynos: dts: cros5250: Add hdmi phy settings

2013-10-29 Thread Shirish S
This patch moves the hdmi phy setting to arndale dts, as its more of a per board configuration and also shall be easier for supporting future chipsets. Signed-off-by: Shirish S --- arch/arm/boot/dts/cros5250-common.dtsi | 75 1 file changed, 75 insertions

[PATCH 3/3] drm: exynos: hdmi: Add dt support for hdmiphy settings

2013-10-28 Thread Shirish S
This patch adds dt support to hdmiphy config settings as it is board specific and depends on the signal pattern of board. Signed-off-by: Shirish S --- .../devicetree/bindings/video/exynos_hdmi.txt | 29 arch/arm/boot/dts/exynos5250-arndale.dts |6 +- drivers/gpu

[PATCH 1/3] ARM: dts: smdk5250: Add hdmi phy settings

2013-10-28 Thread Shirish S
This patch moves the hdmi phy setting to smdk5250 dts,as its more of a per board configuration and also shall be easier for supporting future chipsets. Signed-off-by: Shirish S --- arch/arm/boot/dts/exynos5250-smdk5250.dts | 68 + 1 file changed, 68 insertions

[PATCH 1/7] drm/exynos: move hdmiphy related code to hdmiphy driver

2013-10-28 Thread Shirish S
Hi, I have uploaded patch set 2, with only required registers being moved to dt file. Thanks, Shirish S On Thu, Oct 3, 2013 at 7:58 AM, Shirish S wrote: > Hi, > First of all sorry for the late response, > > > On Tue, Oct 1, 2013 at 10:09 AM, Inki Dae wrote: > >> >&

[PATCH 3/3] drm: exynos: hdmi: Add dt support for hdmiphy settings

2013-10-28 Thread Shirish S
Hi Mark, Firstly thanks for reviewing. On Mon, Oct 28, 2013 at 12:20 PM, Mark Rutland wrote: > Hi, > > On Mon, Oct 28, 2013 at 06:24:22AM +, Shirish S wrote: > > This patch adds dt support to hdmiphy config settings > > as it is board specific and depends on the signal

[PATCH 0/3] Add dt support for exynos hdmiphy settings

2013-10-28 Thread Shirish S
registers. V3: Incorporated Mark Rutland's comments. Shirish S (3): ARM: dts: smdk5250: Add hdmi phy settings ARM: dts: arndale: Add hdmi phy settings drm: exynos: hdmi: Add dt support for hdmiphy settings .../devicetree/bindings/video/exynos_hdmi.txt | 32 + arch/arm/boot

[PATCH 1/3] ARM: dts: smdk5250: Add hdmi phy settings

2013-10-28 Thread Shirish S
This patch moves the hdmi phy setting to smdk5250 dts,as its more of a per board configuration and also shall be easier for supporting future chipsets. Signed-off-by: Shirish S --- arch/arm/boot/dts/exynos5250-smdk5250.dts | 68 + 1 file changed, 68 insertions

[PATCH 3/3] drm: exynos: hdmi: Add dt support for hdmiphy settings

2013-10-28 Thread Shirish S
This patch adds dt support to hdmiphy config settings as it is board specific and depends on the signal pattern of board. Signed-off-by: Shirish S --- .../devicetree/bindings/video/exynos_hdmi.txt | 32 + drivers/gpu/drm/exynos/exynos_hdmi.c | 76

[PATCH 0/3] Add dt support for exynos hdmiphy settings

2013-10-29 Thread Shirish S
Original Message- > > From: Shirish S [mailto:s.shirish at samsung.com] > > Sent: Monday, October 28, 2013 7:39 PM > > To: dri-devel at lists.freedesktop.org; inki.dae at samsung.com; > > devicetree at vger.kernel.org > > Cc: seanpaul at chromium.org; sw0312.k

[PATCH 3/3] drm: exynos: hdmi: Add dt support for hdmiphy settings

2013-10-29 Thread Shirish S
On Tue, Oct 29, 2013 at 4:08 AM, Mark Rutland wrote: > On Mon, Oct 28, 2013 at 10:15:00AM +0000, Shirish S wrote: >> Hi Mark, >> Firstly thanks for reviewing. > > Hi, > > Please could you refrain from replying in HTML and use plaintext, it's rather > difficul

[PATCH 2/4] ARM: dts: arndale: Add hdmi phy settings

2013-10-29 Thread Shirish S
This patch moves the hdmi phy setting to arndale dts, as its more of a per board configuration and also shall be easier for supporting future chipsets. Signed-off-by: Shirish S --- arch/arm/boot/dts/exynos5250-arndale.dts | 75 ++ 1 file changed, 75 insertions

[PATCH 0/3] Add dt support for exynos hdmiphy settings

2013-10-28 Thread Shirish S
registers. Shirish S (3): ARM: dts: smdk5250: Add hdmi phy settings ARM: dts: arndale: Add hdmi phy settings drm: exynos: hdmi: Add dt support for hdmiphy settings .../devicetree/bindings/video/exynos_hdmi.txt | 29 arch/arm/boot/dts/exynos5250-arndale.dts | 68

[PATCH] drm/exynos: add phy settings for RB resolutions

2014-04-02 Thread Shirish S
Hi, Kindly hold the merging of this patch, i shall update it with proper values, once i receive it from our hardware team. Regards, ShirisH S On Thu, Mar 20, 2014 at 1:05 PM, St?phane Marchesin wrote: > > > > On Wed, Mar 12, 2014 at 10:28 PM, Shirish S wrote: >> >>

[PATCH] Enable probing of non-rb modes

2013-11-15 Thread Shirish S
in connectors probed modes and hence on running xrandr is not listed. Shirish S (1): drm: edid: enable probing and listing of non rb modes drivers/gpu/drm/drm_edid.c | 74 +--- 1 file changed, 36 insertions(+), 38 deletions(-) -- 1.7.9.5

[PATCH] drm: edid: enable probing and listing of non rb modes

2013-11-15 Thread Shirish S
pixel clock is not supported but non-rb mode is supported. This patch does 2 things: 1. adds "rb" suffix to rb modes. 2. changes the drm_mode_std mode selection to collect all the supported modes and not just one mode. Signed-off-by: Shirish S --- drivers/gpu/drm/drm_edi

[PATCH 4/4] drm: exynos: hdmi: Add dt support for hdmiphy settings

2013-11-18 Thread Shirish S
Hi, On Fri, Nov 15, 2013 at 9:47 PM, Mark Rutland wrote: > On Tue, Oct 29, 2013 at 08:12:32AM +0000, Shirish S wrote: >> This patch adds dt support to hdmiphy config settings >> as it is board specific and depends on the signal pattern >> of board. >>

[PATCH 0/4] Add dt support for exynos hdmiphy settings

2013-11-18 Thread Shirish S
to be updated. Shirish S (4): ARM: dts: smdk5250: Add hdmi phy settings ARM: dts: arndale: Add hdmi phy settings ARM: exynos: dts: cros5250: Add hdmi phy settings drm: exynos: hdmi: Add dt support for hdmiphy settings .../devicetree/bindings/video/exynos_hdmi.txt | 33 + arch/arm

[PATCH 1/4] ARM: dts: smdk5250: Add hdmi phy settings

2013-11-18 Thread Shirish S
This patch moves the hdmi phy setting to smdk5250 dts,as its more of a per board configuration and also shall be easier for supporting future chipsets. Signed-off-by: Shirish S --- arch/arm/boot/dts/exynos5250-smdk5250.dts | 75 + 1 file changed, 75 insertions

[PATCH 2/4] ARM: dts: arndale: Add hdmi phy settings

2013-11-18 Thread Shirish S
This patch moves the hdmi phy setting to arndale dts, as its more of a per board configuration and also shall be easier for supporting future chipsets. Signed-off-by: Shirish S --- arch/arm/boot/dts/exynos5250-arndale.dts | 75 ++ 1 file changed, 75 insertions

[PATCH 3/4] ARM: exynos: dts: cros5250: Add hdmi phy settings

2013-11-18 Thread Shirish S
This patch moves the hdmi phy setting to arndale dts, as its more of a per board configuration and also shall be easier for supporting future chipsets. Signed-off-by: Shirish S --- arch/arm/boot/dts/cros5250-common.dtsi | 75 1 file changed, 75 insertions

[PATCH 2/4] ARM: dts: arndale: Add hdmi phy settings

2013-11-18 Thread Shirish S
This patch moves the hdmi phy setting to arndale dts, as its more of a per board configuration and also shall be easier for supporting future chipsets. Signed-off-by: Shirish S --- arch/arm/boot/dts/exynos5250-arndale.dts | 74 ++ 1 file changed, 74 insertions

[PATCH 4/4] drm: exynos: hdmi: Add dt support for hdmiphy settings

2013-11-18 Thread Shirish S
This patch adds dt support to hdmiphy config settings as it is board specific and depends on the signal pattern of board. Signed-off-by: Shirish S --- .../devicetree/bindings/video/exynos_hdmi.txt | 33 + drivers/gpu/drm/exynos/exynos_hdmi.c | 77

[PATCH 0/4] Add dt support for exynos hdmiphy settings

2013-11-18 Thread Shirish S
to be updated. V6: removed nr-configs form the dtsi files. Shirish S (4): ARM: dts: smdk5250: Add hdmi phy settings ARM: dts: arndale: Add hdmi phy settings ARM: exynos: dts: cros5250: Add hdmi phy settings drm: exynos: hdmi: Add dt support for hdmiphy settings .../devicetree/bindings/video

[PATCH 4/4] drm: exynos: hdmi: Add dt support for hdmiphy settings

2013-11-18 Thread Shirish S
This patch adds dt support to hdmiphy config settings as it is board specific and depends on the signal pattern of board. Signed-off-by: Shirish S --- .../devicetree/bindings/video/exynos_hdmi.txt | 33 + drivers/gpu/drm/exynos/exynos_hdmi.c | 77

[PATCH 1/4] ARM: dts: smdk5250: Add hdmi phy settings

2013-11-18 Thread Shirish S
This patch moves the hdmi phy setting to smdk5250 dts,as its more of a per board configuration and also shall be easier for supporting future chipsets. Signed-off-by: Shirish S --- arch/arm/boot/dts/exynos5250-smdk5250.dts | 74 + 1 file changed, 74 insertions

[PATCH 3/4] ARM: exynos: dts: cros5250: Add hdmi phy settings

2013-11-18 Thread Shirish S
This patch moves the hdmi phy setting to arndale dts, as its more of a per board configuration and also shall be easier for supporting future chipsets. Signed-off-by: Shirish S --- arch/arm/boot/dts/cros5250-common.dtsi | 74 1 file changed, 74 insertions

[PATCH 4/4] drm: exynos: hdmi: Add dt support for hdmiphy settings

2013-11-19 Thread Shirish S
Hi Mark, I have uploaded patch set 5 and 6 back to back, but unfortunately still nr-configs is stuck in the example explanation in the exynos_hdmi.txt, just to inform you that am waiting for your review comments so that i can rectify it along with them in the next patch set. Regards, Shirish S

[PATCH] drm: edid: enable probing and listing of non rb modes

2013-11-19 Thread Shirish S
Hi, On Sat, Nov 16, 2013 at 12:29 AM, Adam Jackson wrote: > On Fri, 2013-11-15 at 10:38 +0530, Shirish S wrote: >> The current solution checks for the existing RB mode, >> if available in the edid block returns by adding it, >> but does not populate the connector with

[PATCH] Enable probing of non-rb modes

2013-11-25 Thread Shirish S
in connectors probed modes and hence on running xrandr is not listed. V2: Incorporate review comments by Adam Jackson remove suffix of 'rb' Shirish S (1): drm: edid: enable probing and listing of non rb modes drivers/gpu/drm/drm_edid.c | 40 ++-- 1 file changed

[PATCH 4/4] drm: exynos: hdmi: Add dt support for hdmiphy settings

2013-11-25 Thread Shirish S
This patch adds dt support to hdmiphy config settings as it is board specific and depends on the signal pattern of board. Signed-off-by: Shirish S --- .../devicetree/bindings/video/exynos_hdmi.txt | 31 drivers/gpu/drm/exynos/exynos_hdmi.c | 77

[PATCH] drm: edid: enable probing and listing of non rb modes

2013-11-25 Thread Shirish S
pixel clock is not supported but non-rb mode is supported. This patch changes the drm_mode_std mode selection to collect all the supported modes and not just one mode. Signed-off-by: Shirish S --- drivers/gpu/drm/drm_edid.c | 40 ++-- 1 file changed, 18

[PATCH 0/4] Add dt support for exynos hdmiphy settings

2013-11-25 Thread Shirish S
to be updated. V6: V7: removed nr-configs form the dtsi files. Shirish S (4): ARM: dts: smdk5250: Add hdmi phy settings ARM: dts: arndale: Add hdmi phy settings ARM: exynos: dts: cros5250: Add hdmi phy settings drm: exynos: hdmi: Add dt support for hdmiphy settings .../devicetree/bindings/video

[PATCH 1/4] ARM: dts: smdk5250: Add hdmi phy settings

2013-11-25 Thread Shirish S
This patch moves the hdmi phy setting to smdk5250 dts,as its more of a per board configuration and also shall be easier for supporting future chipsets. Signed-off-by: Shirish S --- arch/arm/boot/dts/exynos5250-smdk5250.dts | 74 + 1 file changed, 74 insertions

[PATCH 3/4] ARM: exynos: dts: cros5250: Add hdmi phy settings

2013-11-25 Thread Shirish S
This patch moves the hdmi phy setting to arndale dts, as its more of a per board configuration and also shall be easier for supporting future chipsets. Signed-off-by: Shirish S --- arch/arm/boot/dts/cros5250-common.dtsi | 74 1 file changed, 74 insertions

[PATCH] drm: edid: enable probing and listing of non rb modes

2013-11-25 Thread Shirish S
pixel clock is not supported but non-rb mode is supported. This patch changes the drm_mode_std mode selection to collect all the supported modes and not just one mode. Signed-off-by: Shirish S --- drivers/gpu/drm/drm_edid.c | 40 ++-- 1 file changed, 18

  1   2   >