[PATCH v4 2/3] drm/panel: Add support for S6E3HA2 panel driver on TM2 board
Hi Hoegeun,
I tested this patch on Exynos5433-TM2 board. It is well working
Tested-by: Chanwoo Choi
Regards,
Chanwoo Choi
On 2017ë
01ì 04ì¼ 15:58, Hoegeun Kwon wrote:
> This patch add support for MIPI-DSI based S6E3HA2 AMOLED panel
> driver. This panel has 1440x2560 resolution in 5.7-inch physical
> panel in the TM2 device.
>
> Signed-off-by: Donghwa Lee
> Signed-off-by: Hyungwon Hwang
> Signed-off-by: Hoegeun Kwon
> ---
> .../bindings/display/panel/samsung,s6e3ha2.txt | 40 ++
> drivers/gpu/drm/panel/Kconfig | 6 +
> drivers/gpu/drm/panel/Makefile | 1 +
> drivers/gpu/drm/panel/panel-samsung-s6e3ha2.c | 741
> +
> 4 files changed, 788 insertions(+)
> create mode 100644
> Documentation/devicetree/bindings/display/panel/samsung,s6e3ha2.txt
> create mode 100644 drivers/gpu/drm/panel/panel-samsung-s6e3ha2.c
>
> diff --git
> a/Documentation/devicetree/bindings/display/panel/samsung,s6e3ha2.txt
> b/Documentation/devicetree/bindings/display/panel/samsung,s6e3ha2.txt
> new file mode 100644
> index 000..6879f51
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/panel/samsung,s6e3ha2.txt
> @@ -0,0 +1,40 @@
> +Samsung S6E3HA2 5.7" 1440x2560 AMOLED panel
> +
> +Required properties:
> + - compatible: "samsung,s6e3ha2"
> + - reg: the virtual channel number of a DSI peripheral
> + - vdd3-supply: I/O voltage supply
> + - vci-supply: voltage supply for analog circuits
> + - reset-gpios: a GPIO spec for the reset pin (active low)
> + - enable-gpios: a GPIO spec for the panel enable pin (active high)
> + - te-gpios: a GPIO spec for the tearing effect synchronization signal
> +gpio pin (active high)
> +
> +The device node can contain one 'port' child node with one child
> +'endpoint' node, according to the bindings defined in [1]. This
> +node should describe panel's video bus.
> +
> +[1]: Documentation/devicetree/bindings/media/video-interfaces.txt
> +
> +Example:
> +
> + {
> + ...
> +
> + panel at 0 {
> + compatible = "samsung,s6e3ha2";
> + reg = <0>;
> + vdd3-supply = <_reg>;
> + vci-supply = <_reg>;
> + reset-gpios = < 0 GPIO_ACTIVE_LOW>;
> + enable-gpios = < 5 GPIO_ACTIVE_HIGH>;
> + te-gpios = < 3 GPIO_ACTIVE_HIGH>;
> +
> + port {
> + panel_in: endpoint {
> + remote-endpoint = <_out>;
> + };
> + };
> + };
> +};
> +
> diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig
> index 62aba97..eea2902 100644
> --- a/drivers/gpu/drm/panel/Kconfig
> +++ b/drivers/gpu/drm/panel/Kconfig
> @@ -52,6 +52,12 @@ config DRM_PANEL_PANASONIC_VVX10F034N00
> WUXGA (1920x1200) Novatek NT1397-based DSI panel as found in some
> Xperia Z2 tablets
>
> +config DRM_PANEL_SAMSUNG_S6E3HA2
> + tristate "Samsung S6E3HA2 DSI video mode panel"
> + depends on OF
> + depends on DRM_MIPI_DSI
> + select VIDEOMODE_HELPERS
> +
> config DRM_PANEL_SAMSUNG_S6E8AA0
> tristate "Samsung S6E8AA0 DSI video mode panel"
> depends on OF
> diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile
> index a5c7ec0..1d483b0 100644
> --- a/drivers/gpu/drm/panel/Makefile
> +++ b/drivers/gpu/drm/panel/Makefile
> @@ -3,6 +3,7 @@ obj-$(CONFIG_DRM_PANEL_JDI_LT070ME05000) +=
> panel-jdi-lt070me05000.o
> obj-$(CONFIG_DRM_PANEL_LG_LG4573) += panel-lg-lg4573.o
> obj-$(CONFIG_DRM_PANEL_PANASONIC_VVX10F034N00) +=
> panel-panasonic-vvx10f034n00.o
> obj-$(CONFIG_DRM_PANEL_SAMSUNG_LD9040) += panel-samsung-ld9040.o
> +obj-$(CONFIG_DRM_PANEL_SAMSUNG_S6E3HA2) += panel-samsung-s6e3ha2.o
> obj-$(CONFIG_DRM_PANEL_SAMSUNG_S6E8AA0) += panel-samsung-s6e8aa0.o
> obj-$(CONFIG_DRM_PANEL_SHARP_LQ101R1SX01) += panel-sharp-lq101r1sx01.o
> obj-$(CONFIG_DRM_PANEL_SHARP_LS043T1LE01) += panel-sharp-ls043t1le01.o
> diff --git a/drivers/gpu/drm/panel/panel-samsung-s6e3ha2.c
> b/drivers/gpu/drm/panel/panel-samsung-s6e3ha2.c
> new file mode 100644
> index 000..8c5a1c2
> --- /dev/null
> +++ b/drivers/gpu/drm/panel/panel-samsung-s6e3ha2.c
> @@ -0,0 +1,741 @@
> +/*
> + * MIPI-DSI based s6e3ha2 AMOLED 5.7 inch panel driver.
> + *
> + * Copyright (c) 2016 Samsung Electronics Co., Ltd.
> + * Donghwa Lee
> + * Hyungwon Hwang
> + * Hoegeun Kwon
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +#include
> +#include
> +#include
> +#include
> +#include
> +#include
> +
> +#define S6E3HA2_MIN_BRIGHTNESS 0
> +#define S6E3HA2_MAX_BRIGHTNESS 100
> +#define S6E3HA2_DEFAULT_BRIGHTNESS 80
> +
> +#define S6E3HA2_NUM_GAMMA_STEPS 46
> +#define S6E3HA2_GAMMA_CMD_CNT35
> +#define
[PATCH v4 2/3] drm/panel: Add support for S6E3HA2 panel driver on TM2 board
This patch add support for MIPI-DSI based S6E3HA2 AMOLED panel
driver. This panel has 1440x2560 resolution in 5.7-inch physical
panel in the TM2 device.
Signed-off-by: Donghwa Lee
Signed-off-by: Hyungwon Hwang
Signed-off-by: Hoegeun Kwon
---
.../bindings/display/panel/samsung,s6e3ha2.txt | 40 ++
drivers/gpu/drm/panel/Kconfig | 6 +
drivers/gpu/drm/panel/Makefile | 1 +
drivers/gpu/drm/panel/panel-samsung-s6e3ha2.c | 741 +
4 files changed, 788 insertions(+)
create mode 100644
Documentation/devicetree/bindings/display/panel/samsung,s6e3ha2.txt
create mode 100644 drivers/gpu/drm/panel/panel-samsung-s6e3ha2.c
diff --git
a/Documentation/devicetree/bindings/display/panel/samsung,s6e3ha2.txt
b/Documentation/devicetree/bindings/display/panel/samsung,s6e3ha2.txt
new file mode 100644
index 000..6879f51
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/samsung,s6e3ha2.txt
@@ -0,0 +1,40 @@
+Samsung S6E3HA2 5.7" 1440x2560 AMOLED panel
+
+Required properties:
+ - compatible: "samsung,s6e3ha2"
+ - reg: the virtual channel number of a DSI peripheral
+ - vdd3-supply: I/O voltage supply
+ - vci-supply: voltage supply for analog circuits
+ - reset-gpios: a GPIO spec for the reset pin (active low)
+ - enable-gpios: a GPIO spec for the panel enable pin (active high)
+ - te-gpios: a GPIO spec for the tearing effect synchronization signal
+gpio pin (active high)
+
+The device node can contain one 'port' child node with one child
+'endpoint' node, according to the bindings defined in [1]. This
+node should describe panel's video bus.
+
+[1]: Documentation/devicetree/bindings/media/video-interfaces.txt
+
+Example:
+
+ {
+ ...
+
+ panel at 0 {
+ compatible = "samsung,s6e3ha2";
+ reg = <0>;
+ vdd3-supply = <_reg>;
+ vci-supply = <_reg>;
+ reset-gpios = < 0 GPIO_ACTIVE_LOW>;
+ enable-gpios = < 5 GPIO_ACTIVE_HIGH>;
+ te-gpios = < 3 GPIO_ACTIVE_HIGH>;
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <_out>;
+ };
+ };
+ };
+};
+
diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig
index 62aba97..eea2902 100644
--- a/drivers/gpu/drm/panel/Kconfig
+++ b/drivers/gpu/drm/panel/Kconfig
@@ -52,6 +52,12 @@ config DRM_PANEL_PANASONIC_VVX10F034N00
WUXGA (1920x1200) Novatek NT1397-based DSI panel as found in some
Xperia Z2 tablets
+config DRM_PANEL_SAMSUNG_S6E3HA2
+ tristate "Samsung S6E3HA2 DSI video mode panel"
+ depends on OF
+ depends on DRM_MIPI_DSI
+ select VIDEOMODE_HELPERS
+
config DRM_PANEL_SAMSUNG_S6E8AA0
tristate "Samsung S6E8AA0 DSI video mode panel"
depends on OF
diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile
index a5c7ec0..1d483b0 100644
--- a/drivers/gpu/drm/panel/Makefile
+++ b/drivers/gpu/drm/panel/Makefile
@@ -3,6 +3,7 @@ obj-$(CONFIG_DRM_PANEL_JDI_LT070ME05000) +=
panel-jdi-lt070me05000.o
obj-$(CONFIG_DRM_PANEL_LG_LG4573) += panel-lg-lg4573.o
obj-$(CONFIG_DRM_PANEL_PANASONIC_VVX10F034N00) +=
panel-panasonic-vvx10f034n00.o
obj-$(CONFIG_DRM_PANEL_SAMSUNG_LD9040) += panel-samsung-ld9040.o
+obj-$(CONFIG_DRM_PANEL_SAMSUNG_S6E3HA2) += panel-samsung-s6e3ha2.o
obj-$(CONFIG_DRM_PANEL_SAMSUNG_S6E8AA0) += panel-samsung-s6e8aa0.o
obj-$(CONFIG_DRM_PANEL_SHARP_LQ101R1SX01) += panel-sharp-lq101r1sx01.o
obj-$(CONFIG_DRM_PANEL_SHARP_LS043T1LE01) += panel-sharp-ls043t1le01.o
diff --git a/drivers/gpu/drm/panel/panel-samsung-s6e3ha2.c
b/drivers/gpu/drm/panel/panel-samsung-s6e3ha2.c
new file mode 100644
index 000..8c5a1c2
--- /dev/null
+++ b/drivers/gpu/drm/panel/panel-samsung-s6e3ha2.c
@@ -0,0 +1,741 @@
+/*
+ * MIPI-DSI based s6e3ha2 AMOLED 5.7 inch panel driver.
+ *
+ * Copyright (c) 2016 Samsung Electronics Co., Ltd.
+ * Donghwa Lee
+ * Hyungwon Hwang
+ * Hoegeun Kwon
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include
+#include
+#include
+#include
+#include
+#include
+
+#define S6E3HA2_MIN_BRIGHTNESS 0
+#define S6E3HA2_MAX_BRIGHTNESS 100
+#define S6E3HA2_DEFAULT_BRIGHTNESS 80
+
+#define S6E3HA2_NUM_GAMMA_STEPS46
+#define S6E3HA2_GAMMA_CMD_CNT 35
+#define S6E3HA2_VINT_STATUS_MAX10
+
+static const u8 gamma_tbl[S6E3HA2_NUM_GAMMA_STEPS][S6E3HA2_GAMMA_CMD_CNT] = {
+ { 0x00, 0xb8, 0x00, 0xc3, 0x00, 0xb1, 0x89, 0x87, 0x87, 0x82, 0x83,
+ 0x85, 0x88, 0x8b, 0x8b, 0x84, 0x88, 0x82, 0x82, 0x89, 0x86, 0x8c,
+ 0x94, 0x84, 0xb1, 0xaf, 0x8e, 0xcf, 0xad, 0xc9, 0x00, 0x00, 0x00,
+ 0x00, 0x00 },
+ { 0x00, 0xb8, 0x00, 0xc3, 0x00, 0xb1,
