Re: [PATCH v8 1/3] dt-bindings: Add support for samsung s6e3ha2 panel binding

[Rob Herring]

On Wed, Jan 11, 2017 at 03:33:57PM +0900, Hoegeun Kwon wrote:
> The Samsung s6e3ha2 is a 5.7" 1440x2560 AMOLED panel connected
> using MIPI-DSI interfaces.
> 
> Signed-off-by: Donghwa Lee 
> Signed-off-by: Hyungwon Hwang 
> Signed-off-by: Hoegeun Kwon 
> Tested-by: Chanwoo Choi 
> Reviewed-by: Andrzej Hajda 
> ---
>  .../bindings/display/panel/samsung,s6e3ha2.txt | 26 
> ++
>  1 file changed, 26 insertions(+)
>  create mode 100644 
> Documentation/devicetree/bindings/display/panel/samsung,s6e3ha2.txt

Acked-by: Rob Herring 
___
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [PATCH v8 1/3] dt-bindings: Add support for samsung s6e3ha2 panel binding

[Chanwoo Choi]

Hi Hoegeun,

2017-01-11 15:33 GMT+09:00 Hoegeun Kwon :
> The Samsung s6e3ha2 is a 5.7" 1440x2560 AMOLED panel connected
> using MIPI-DSI interfaces.
>
> Signed-off-by: Donghwa Lee 
> Signed-off-by: Hyungwon Hwang 
> Signed-off-by: Hoegeun Kwon 
> Tested-by: Chanwoo Choi 

I think my tested-by tag is improper against binding documentation.
Maybe you added the my tested-by tag when you split the panel
driver because I replied my tested-by tag to panel driver.

You better to drop the my tested-by tag from only this patch
(binding documentation).

> Reviewed-by: Andrzej Hajda 
> ---
>  .../bindings/display/panel/samsung,s6e3ha2.txt | 26 
> ++
>  1 file changed, 26 insertions(+)
>  create mode 100644 
> Documentation/devicetree/bindings/display/panel/samsung,s6e3ha2.txt
>
> diff --git 
> a/Documentation/devicetree/bindings/display/panel/samsung,s6e3ha2.txt 
> b/Documentation/devicetree/bindings/display/panel/samsung,s6e3ha2.txt
> new file mode 100644
> index 000..3e7892c
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/panel/samsung,s6e3ha2.txt
> @@ -0,0 +1,26 @@
> +Samsung S6E3HA2 5.7" 1440x2560 AMOLED panel
> +
> +Required properties:
> +  - compatible: "samsung,s6e3ha2"
> +  - reg: the virtual channel number of a DSI peripheral
> +  - vdd3-supply: I/O voltage supply
> +  - vci-supply: voltage supply for analog circuits
> +  - reset-gpios: a GPIO spec for the reset pin (active low)
> +  - enable-gpios: a GPIO spec for the panel enable pin (active high)
> +  - te-gpios: a GPIO spec for the tearing effect synchronization signal
> +gpio pin (active high)
> +
> +Example:
> + {
> +   ...
> +
> +   panel@0 {
> +   compatible = "samsung,s6e3ha2";
> +   reg = <0>;
> +   vdd3-supply = <_reg>;
> +   vci-supply = <_reg>;
> +   reset-gpios = < 0 GPIO_ACTIVE_LOW>;
> +   enable-gpios = < 5 GPIO_ACTIVE_HIGH>;
> +   te-gpios = < 3 GPIO_ACTIVE_HIGH>;
> +   };
> +};
> --
> 1.9.1
>
> ___
> dri-devel mailing list
> dri-devel@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel



-- 
Best Regards,
Chanwoo Choi
Samsung Electronics
___
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel