Re: [PATCH 10/20] gpio: pca953x: Add optional reset gpio control

Hi, On Thu, 29 Dec 2016 14:27:25 -0800 Steve Longerbeam wrote: > Add optional reset-gpios pin control. If present, de-assert the > specified reset gpio pin to bring the chip out of reset. > > Signed-off-by: Steve Longerbeam > Cc: Linus Walleij

[PATCH 2/3] staging: rtl8188eu: remove unused function _linked_rx_signal_strehgth_display

Not referenced anymore since the removal of field bRxRSSIDisplay in struct adapter. Cc: Greg Kroah-Hartman Cc: Larry Finger Cc: Ivan Safonov Cc: de...@driverdev.osuosl.org Signed-off-by: Luca Ceresoli

[PATCH 3/3] staging: rtl8188eu: remove unused members from struct recv_priv

Since commit da25a8ec6b2d ("staging: rtl8188eu: remove unused debugging functions") is_signal_dbg is never set to true, so the code under if (adapter->recvpriv.is_signal_dbg) is dead. Remove the variable and the dead code. The signal_strength_dbg was referenced only in the code that is being

[PATCH 1/3] staging: rtl8188eu: remove unused field bRxRSSIDisplay in struct adapter

Since commit da25a8ec6b2d ("staging: rtl8188eu: remove unused debugging functions") this field is never set set to any nonzero value, so it is actually always zero. It is also used only once, as a boolean inside an if(). This means the code under that if() is dead code, so remove it as well. Cc:

[PATCH 20/20] ARM: imx_v6_v7_defconfig: Enable staging video4linux drivers

Enable imx v4l2 staging drivers. For video capture on the SabreAuto, the ADV7180 video decoder also requires the i2c-mux-gpio and the max7310 port expander. The Sabrelite requires PWM clocks for the OV5640. Signed-off-by: Steve Longerbeam ---

[PATCH 18/20] media: imx: Add MIPI CSI-2 OV5640 sensor subdev driver

This driver is based on ov5640_mipi.c from Freescale imx_3.10.17_1.0.0_beta branch, modified heavily to bring forward to latest interfaces and code cleanup. Signed-off-by: Steve Longerbeam --- drivers/staging/media/imx/Kconfig |8 +

[PATCH 14/20] media: imx: Add IC subdev drivers

This is a set of three media entity subdevice drivers for the i.MX Image Converter. The i.MX IC module contains three independent "tasks": - Pre-processing Encode task: video frames are routed directly from the CSI and can be scaled, color-space converted, and rotated. Scaled output is

[PATCH 16/20] media: imx: Add MIPI CSI-2 Receiver subdev driver

Adds MIPI CSI-2 Receiver subdev driver. This subdev is required for sensors with a MIPI CSI2 interface. Signed-off-by: Steve Longerbeam --- drivers/staging/media/imx/Makefile| 1 + drivers/staging/media/imx/imx-mipi-csi2.c | 509

[PATCH 17/20] media: imx: Add video switch subdev driver

From: Philipp Zabel This driver can handle SoC internal and extern video bus multiplexers, controlled either by register bit fields or by GPIO. Signed-off-by: Sascha Hauer Signed-off-by: Philipp Zabel Signed-off-by: Steve

[PATCH 11/20] media: Add i.MX media core driver

Add the core media driver for i.MX SOC. Signed-off-by: Steve Longerbeam --- Documentation/devicetree/bindings/media/imx.txt | 205 + Documentation/media/v4l-drivers/imx.rst | 429 ++ drivers/staging/media/Kconfig | 2 +

[PATCH 15/20] media: imx: Add Camera Interface subdev driver

This is the camera interface driver that provides the v4l2 user interface. Frames can be received from various sources: - directly from SMFC for capturing unconverted images directly from camera sensors. - from the IC pre-process encode task. - from the IC pre-process viewfinder task. - from

[PATCH 08/20] ARM: dts: imx6-sabreauto: add pinctrl for gpt input capture

Add pinctrl groups for both GPT input capture channels. Signed-off-by: Steve Longerbeam --- arch/arm/boot/dts/imx6qdl-sabreauto.dtsi | 12 1 file changed, 12 insertions(+) diff --git a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi

[PATCH 07/20] ARM: dts: imx6-sabreauto: add reset-gpios property for max7310_b

The reset pin to the port expander chip (MAX7310) is controlled by a gpio, so define a reset-gpios property to control it. There are three MAX7310's on the SabreAuto CPU card (max7310_[abc]), but all use the same pin for their reset. Since all can't acquire the same pin, assign it to max7310_b,

[PATCH 13/20] media: imx: Add SMFC subdev driver

This is a media entity subdevice driver for the i.MX Sensor Multi-FIFO Controller module. Video frames are received from the CSI and can be routed to various sinks including the i.MX Image Converter for scaling, color-space conversion, motion compensated deinterlacing, and image rotation. ---

[PATCH 09/20] ARM: dts: imx6-sabreauto: add the ADV7180 video decoder

Enables the ADV7180 decoder sensor. The ADV7180 connects to the parallel-bus mux input on ipu1_csi0_mux. On the sabreauto, two analog video inputs are routed to the ADV7180, composite on Ain1, and composite on Ain3. Those inputs are defined via inputs and input-names under the ADV7180 node. The

[PATCH 10/20] gpio: pca953x: Add optional reset gpio control

Add optional reset-gpios pin control. If present, de-assert the specified reset gpio pin to bring the chip out of reset. Signed-off-by: Steve Longerbeam Cc: Linus Walleij Cc: Alexandre Courbot Cc:

[PATCH 06/20] ARM: dts: imx6-sabreauto: create i2cmux for i2c3

The sabreauto uses a steering pin to select between the SDA signal on i2c3 bus, and a data-in pin for an SPI NOR chip. Use i2cmux to control this steering pin. Idle state of the i2cmux selects SPI NOR. This is not a classic way to use i2cmux, since one side of the mux selects something other than

[PATCH 12/20] media: imx: Add CSI subdev driver

This is a media entity subdevice for the i.MX Camera Serial Interface module. Signed-off-by: Steve Longerbeam --- drivers/staging/media/imx/Kconfig | 13 + drivers/staging/media/imx/Makefile | 2 + drivers/staging/media/imx/imx-csi.c | 638

[PATCH 04/20] ARM: dts: imx6-sabrelite: add OV5642 and OV5640 camera sensors

Enables the OV5642 parallel-bus sensor, and the OV5640 MIPI CSI-2 sensor. Both hang off the same i2c2 bus, so they require different (and non- default) i2c slave addresses. The OV5642 connects to the parallel-bus mux input port on ipu1_csi0_mux. The OV5640 connects to the input port on the MIPI

[PATCH 05/20] ARM: dts: imx6-sabresd: add OV5642 and OV5640 camera sensors

Enables the OV5642 parallel-bus sensor, and the OV5640 MIPI CSI-2 sensor. The OV5642 connects to the parallel-bus mux input port on ipu1_csi0_mux. The OV5640 connects to the input port on the MIPI CSI-2 receiver on mipi_csi. It is set to transmit over MIPI virtual channel 1. Until the OV5652

[PATCH 03/20] ARM: dts: imx6qdl: add media device

Signed-off-by: Steve Longerbeam --- arch/arm/boot/dts/imx6q.dtsi | 4 arch/arm/boot/dts/imx6qdl.dtsi | 8 2 files changed, 12 insertions(+) diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi index 56a314f..2fbe0b3 100644 ---

[PATCH 02/20] ARM: dts: imx6qdl: Add mipi_ipu1/2 multiplexers, mipi_csi, and their connections

From: Philipp Zabel This patch adds the device tree graph connecting the input multiplexers to the IPU CSIs and the MIPI-CSI2 gasket on i.MX6. The MIPI_IPU multiplexers are added as children of the iomuxc-gpr syscon device node. On i.MX6Q/D two two-input multiplexers in

[PATCH 01/20] ARM: dts: imx6qdl: Add compatible, clocks, irqs to MIPI CSI-2 node

Add to the MIPI CSI2 receiver node: compatible string, interrupt sources, clocks. Signed-off-by: Steve Longerbeam --- arch/arm/boot/dts/imx6qdl.dtsi | 7 +++ 1 file changed, 7 insertions(+) diff --git a/arch/arm/boot/dts/imx6qdl.dtsi

[PATCH 00/20] i.MX Media Driver

This is a media driver for video capture on i.MX. Refer to Documentation/media/v4l-drivers/imx.rst for example capture pipelines on SabreSD, SabreAuto, and SabreLite reference platforms. This patchset includes the OF graph layout as proposed by Philipp Zabel, with only minor changes which are

[PATCH] staging: wilc1000: Fix endian sparse warning

drivers/staging/wilc1000/linux_wlan.c:995:18: warning: restricted __be16 degrades to integer Signed-off-by: Mike Kofron --- drivers/staging/wilc1000/linux_wlan.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/staging/wilc1000/linux_wlan.c

[PATCH] staging:lustre:remove braces from single-line body

Remove unnecessary braces from single line if statement. This warning is found using checkpatch.pl. Signed-off-by: Tabrez khan --- drivers/staging/lustre/lustre/obdecho/echo_client.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git

Re: [PATCH 12/15] hyperv: move VMBus connection ids to uapi

On Wed, 28 Dec 2016 20:09:44 +0300 Roman Kagan wrote: > On Wed, Dec 21, 2016 at 07:54:11PM +, KY Srinivasan wrote: > > > > > > > -Original Message- > > > From: Stephen Hemminger [mailto:step...@networkplumber.org] > > > Sent: Wednesday, December 21, 2016

[PATCH] staging: r8188eu: fix spelling mistake on xmitframe_coalsece

From: Colin Ian King trivial fix to spelling mistake of function name in debuf message, should be xmitframe_coalesce instead of xmitframe_coalsece. Signed-off-by: Colin Ian King --- drivers/staging/rtl8188eu/hal/rtl8188eu_xmit.c | 2 +- 1

[PATCH] staging:lustre:fixed space coding style in o2iblnd_cb.c

Space required before assignment operator, to make close to kernel coding style. This error is found using checkpatch.pl. Signed-off-by: Tabrez khan --- drivers/staging/lustre/lnet/klnds/o2iblnd/o2iblnd_cb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff

[PATCH] staging:lustre:fixed space coding style in o2iblnd_cb.c

Space required before assignment operator, to make close to kernel coding style. This error is found using checkpatch.pl. Signed-off-by: Tabrez khan --- drivers/staging/lustre/lnet/klnds/o2iblnd/o2iblnd_cb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff

[PATCH] staging : lustre : Remove braces from single line body.

Remove unnecessary braces from single line if statement. This warning is found using checkpatch.pl. Signed-off-by: Tabrez khan --- drivers/staging/lustre/lustre/osc/lproc_osc.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git