> -Original Message-
> From: k...@linuxonhyperv.com
> Sent: Wednesday, November 21, 2018 6:51 PM
> To: gre...@linuxfoundation.org; linux-ker...@vger.kernel.org;
> de...@linuxdriverproject.org; o...@aepfle.de; a...@canonical.com;
> jasow...@redhat.com; Stephen Hemminger ;
> Michael
From: Michael Kelley
Update drivers/hv/Kconfig so CONFIG_HYPERV can be selected on ARM64,
causing the Hyper-V specific code to be built.
Signed-off-by: Michael Kelley
Signed-off-by: K. Y. Srinivasan
---
drivers/hv/Kconfig | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git
From: Michael Kelley
Add ARM64-specific code to enable Hyper-V. This code includes:
* Detecting Hyper-V and initializing the guest/Hyper-V interface
* Setting up Hyper-V's synthetic clocks
* Making hypercalls using the HVC instruction
* Setting up VMbus and stimer0 interrupts
* Setting up kexec
From: Michael Kelley
Add hooks to enable/disable a per-CPU IRQ for VMbus. These hooks
are in the architecture independent setup and shutdown paths for
Hyper-V, and are needed by Linux guests on Hyper-V on ARM64. The
x86/x64 implementation is null because VMbus interrupts on x86/x64
don't use an
From: Michael Kelley
hyperv-tlfs.h defines Hyper-V interfaces from the Hyper-V Top Level
Functional Spec (TLFS). The TLFS is distinctly oriented to x86/x64,
and Hyper-V has not separated out the architecture-dependent parts into
x86/x64 vs. ARM64. So hyperv-tlfs.h includes information for ARM64
From: "K. Y. Srinivasan"
This series enables Linux guests running on Hyper-V on ARM64
hardware. New ARM64-specific code in arch/arm64/hyperv initializes
Hyper-V, including its synthetic clocks and hypercall mechanism.
Existing architecture independent drivers for Hyper-V's VMbus and
synthetic
From: "K. Y. Srinivasan"
This series enables Linux guests running on Hyper-V on ARM64
hardware. New ARM64-specific code in arch/arm64/hyperv initializes
Hyper-V, including its synthetic clocks and hypercall mechanism.
Existing architecture independent drivers for Hyper-V's VMbus and
synthetic
From: Michał Mirosław
Date: Tue, 20 Nov 2018 13:20:30 +0100
> This is a cleanup set after VLAN_TAG_PRESENT removal. The CFI bit
> handling is made similar to how other tag fields are used.
Series applied, thanks.
___
devel mailing list
Hi Rui,
I love your patch! Perhaps something to improve:
[auto build test WARNING on linuxtv-media/master]
[also build test WARNING on v4.20-rc3 next-20181121]
[if your patch is applied to the wrong git tree, please drop us a note to help
improve the system]
url:
https://github.com/0day-ci
From: kbuild test robot
drivers/staging/media/imx/imx7-mipi-csis.c:1125:3-8: No need to set .owner
here. The core will do it.
Remove .owner field if calls are used which set it automatically
Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci
Fixes: 181331ab8acb ("media:
Hi Rui,
I love your patch! Yet something to improve:
[auto build test ERROR on linuxtv-media/master]
[also build test ERROR on v4.20-rc3 next-20181121]
[if your patch is applied to the wrong git tree, please drop us a note to help
improve the system]
url:
https://github.com/0day-ci/linux
Hi Rui,
On Wed, Nov 21, 2018 at 11:15:49AM +, Rui Miguel Silva wrote:
> This add the media entity subdevice and control driver for the i.MX7
> CMOS Sensor Interface.
>
> Signed-off-by: Rui Miguel Silva
> ---
> drivers/staging/media/imx/Kconfig |9 +-
>
Hi Rui,
On Wed, Nov 21, 2018 at 11:15:51AM +, Rui Miguel Silva wrote:
> Add bindings documentation for i.MX7 media drivers.
> The imx7 MIPI CSI2 and imx7 CMOS Sensor Interface.
>
> Signed-off-by: Rui Miguel Silva
> Reviewed-by: Rob Herring
> Acked-by: Sakari Ailus
> ---
>
Remove unnecessary parentheses reported by checkpatch.
Signed-off-by: Michael Straube
---
drivers/staging/rtl8188eu/hal/rtl8188eu_led.c | 8
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/staging/rtl8188eu/hal/rtl8188eu_led.c
Rename the function LedControl8188eu to avoid CamelCase.
LedControl8188eu -> led_control_8188eu
Signed-off-by: Michael Straube
---
drivers/staging/rtl8188eu/core/rtw_cmd.c | 6 +++---
drivers/staging/rtl8188eu/core/rtw_led.c | 2 +-
drivers/staging/rtl8188eu/core/rtw_mlme.c| 4 ++--
Rename the function SwLedOff to avoid CamelCase.
SwLedOff -> sw_led_off
Signed-off-by: Michael Straube
---
drivers/staging/rtl8188eu/core/rtw_led.c | 6 +++---
drivers/staging/rtl8188eu/hal/rtl8188eu_led.c | 2 +-
drivers/staging/rtl8188eu/include/rtw_led.h | 2 +-
3 files changed, 5
The comment for blink_handler() adds no extra information
in addition to the function name, so remove it.
Signed-off-by: Michael Straube
---
drivers/staging/rtl8188eu/core/rtw_led.c | 4
1 file changed, 4 deletions(-)
diff --git a/drivers/staging/rtl8188eu/core/rtw_led.c
Rename the variable LedCfg to avoid CamleCase.
LedCfg -> led_cfg
Signed-off-by: Michael Straube
---
drivers/staging/rtl8188eu/hal/rtl8188eu_led.c | 20 +--
1 file changed, 10 insertions(+), 10 deletions(-)
diff --git a/drivers/staging/rtl8188eu/hal/rtl8188eu_led.c
Rename the function BlinkHandler to avoid CamelCase.
BlinkHandler -> blink_handler
Signed-off-by: Michael Straube
---
drivers/staging/rtl8188eu/core/rtw_led.c| 4 ++--
drivers/staging/rtl8188eu/include/rtw_led.h | 2 +-
2 files changed, 3 insertions(+), 3 deletions(-)
diff --git
Rename struct field SwLed0 to avoid CamelCase.
SwLed0 -> sw_led
Signed-off-by: Michael Straube
---
drivers/staging/rtl8188eu/core/rtw_led.c | 2 +-
drivers/staging/rtl8188eu/hal/rtl8188eu_led.c | 4 ++--
drivers/staging/rtl8188eu/include/rtw_led.h | 4 +---
3 files changed, 4
Remove comments in rtl8188eu_led.c. The function names are well
descriptive.
Signed-off-by: Michael Straube
---
drivers/staging/rtl8188eu/hal/rtl8188eu_led.c | 16 +---
1 file changed, 1 insertion(+), 15 deletions(-)
diff --git a/drivers/staging/rtl8188eu/hal/rtl8188eu_led.c
Rename the function SwLedOn to avoid CamelCase.
SwLedOn -> sw_led_on
Signed-off-by: Michael Straube
---
drivers/staging/rtl8188eu/core/rtw_led.c | 2 +-
drivers/staging/rtl8188eu/hal/rtl8188eu_led.c | 2 +-
drivers/staging/rtl8188eu/include/rtw_led.h | 2 +-
3 files changed, 3
Add spaces around '&' to follow kernel coding style.
Reported by checkpatch.
Signed-off-by: Michael Straube
---
drivers/staging/rtl8188eu/hal/rtl8188eu_led.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/staging/rtl8188eu/hal/rtl8188eu_led.c
On Tue, 20 Nov 2018 21:59:19 -0200
Matheus Tavares Bernardino wrote:
> On Mon, Nov 19, 2018 at 6:09 AM Ardelean, Alexandru
> wrote:
> >
> > On Sun, 2018-11-18 at 02:25 -0200, Matheus Tavares wrote:
> > > This patch adds device tree support to ad2s90 with standard
> > > device tree id table.
>
Previously, the AD7780 driver only supported gpio for the 'powerdown'
pin. This commit adds suppport for the 'gain' and 'filter' pin.
Signed-off-by: Giuliano Belinassi
---
drivers/staging/iio/adc/ad7780.c | 61 --
include/linux/iio/adc/ad_sigma_delta.h | 5 +++
2
On 21.11.18 15:58, Kazuhito Hagio wrote:
> Hi David,
>
>> Linux marks pages that are logically offline via a page flag (map count).
>> Such pages e.g. include pages infated as part of a balloon driver or
>> pages that were not actually onlined when onlining the whole section.
>>
>> While the
Hi David,
> Linux marks pages that are logically offline via a page flag (map count).
> Such pages e.g. include pages infated as part of a balloon driver or
> pages that were not actually onlined when onlining the whole section.
>
> While the hypervisor usually allows to read such inflated
On 21.11.18 12:35, William Kucharski wrote:
> If you are adding PageOffline(page) to the condition list of the already
> existing if in
> saveable_highmem_page(), why explicitly add it as a separate statement in
> saveable_page()?
>
> It would seem more consistent to make the second check:
>
>
On 11/21/2018 12:15 PM, Rui Miguel Silva wrote:
> Hi,
> This series introduces the Media driver to work with the i.MX7 SoC. it uses
> the
> already existing imx media core drivers but since the i.MX7, contrary to
> i.MX5/6, do not have an IPU and because of that some changes in the imx media
>
If you are adding PageOffline(page) to the condition list of the already
existing if in
saveable_highmem_page(), why explicitly add it as a separate statement in
saveable_page()?
It would seem more consistent to make the second check:
- if (swsusp_page_is_forbidden(page) ||
Add rst document to describe the i.MX7 media driver and also a working
example from the Warp7 board usage with a OV2680 sensor.
Signed-off-by: Rui Miguel Silva
---
Documentation/media/v4l-drivers/imx7.rst | 157 ++
Documentation/media/v4l-drivers/index.rst | 1 +
2 files
This patch adds the device tree nodes for csi, video multiplexer and mipi-csi
besides the graph connecting the necessary endpoints to make the media capture
entities to work in imx7 Warp board.
Signed-off-by: Rui Miguel Silva
---
arch/arm/boot/dts/imx7s-warp.dts | 51
Add some i.MX7 related entries to TODO file.
Signed-off-by: Rui Miguel Silva
---
drivers/staging/media/imx/TODO | 9 +
1 file changed, 9 insertions(+)
diff --git a/drivers/staging/media/imx/TODO b/drivers/staging/media/imx/TODO
index aeeb15494a49..6f29b5ca5324 100644
---
Add non vendor bayer formats to the allowed format array.
Signed-off-by: Rui Miguel Silva
---
drivers/media/platform/video-mux.c | 20
1 file changed, 20 insertions(+)
diff --git a/drivers/media/platform/video-mux.c
b/drivers/media/platform/video-mux.c
index
Warp7 comes with a Omnivision OV2680 sensor, add the node here to make complete
the camera data path for this system. Add the needed regulator to the analog
voltage supply, the port and endpoints in mipi_csi node and the pinctrl for the
reset gpio.
Signed-off-by: Rui Miguel Silva
---
Hi,
This series introduces the Media driver to work with the i.MX7 SoC. it uses the
already existing imx media core drivers but since the i.MX7, contrary to
i.MX5/6, do not have an IPU and because of that some changes in the imx media
core are made along this series to make it support that case.
Add power domain index 0 related with mipi-phy to imx7s.
While at it rename pcie power-domain node to remove pgc prefix.
Signed-off-by: Rui Miguel Silva
---
arch/arm/boot/dts/imx7s.dtsi | 8 +++-
1 file changed, 7 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/imx7s.dtsi
Adds MIPI CSI-2 subdev for i.MX7 to connect with sensors with a MIPI CSI-2
interface.
Signed-off-by: Rui Miguel Silva
---
drivers/staging/media/imx/Makefile |1 +
drivers/staging/media/imx/imx7-mipi-csis.c | 1134
2 files changed, 1135 insertions(+)
create mode
Add bindings documentation for i.MX7 media drivers.
The imx7 MIPI CSI2 and imx7 CMOS Sensor Interface.
Signed-off-by: Rui Miguel Silva
Reviewed-by: Rob Herring
Acked-by: Sakari Ailus
---
.../devicetree/bindings/media/imx7-csi.txt| 45 ++
.../bindings/media/imx7-mipi-csi2.txt
Refactor and move media device initialization code to a new common module, so it
can be used by other devices, this will allow for example a near to introduce
imx7 CSI driver, to use this media device.
Signed-off-by: Rui Miguel Silva
---
drivers/staging/media/imx/Makefile| 1 +
The IOMUXC General Purpose Register has bitfield to control video bus
multiplexer to control the CSI input between the MIPI-CSI2 and parallel
interface. Add that register and mask.
Signed-off-by: Rui Miguel Silva
Reviewed-by: Philipp Zabel
---
arch/arm/boot/dts/imx7s.dtsi | 8 +++-
1 file
This add the media entity subdevice and control driver for the i.MX7
CMOS Sensor Interface.
Signed-off-by: Rui Miguel Silva
---
drivers/staging/media/imx/Kconfig |9 +-
drivers/staging/media/imx/Makefile |2 +
drivers/staging/media/imx/imx7-media-csi.c | 1352
Some imx system do not have IPU, so prepare the imx media drivers to support
this kind of devices. Rename the group ids to include an _IPU_ prefix, add a new
group id to support systems with only a CSI without IPU, and also
rename the create internal links to make it clear that only systems with
On Wed, 2018-11-21 at 08:21 +, Ardelean, Alexandru wrote:
> On Tue, 2018-11-20 at 22:30 +0530, Shreeya Patel wrote:
> > ADT7316 driver no more uses platform data and hence use device tree
> > data instead of platform data for assigning irq_type field.
> > Switch case figures out the type of
On 21.11.18 04:22, Nadav Amit wrote:
> Thanks for this patch!
>
>> On Nov 19, 2018, at 2:16 AM, David Hildenbrand wrote:
>>
>> Mark inflated and never onlined pages PG_offline, to tell the world that
>> the content is stale and should not be dumped.
>>
>> Cc: Xavier Deguillard
>> Cc: Nadav Amit
On 21.11.18 07:04, Baoquan He wrote:
> On 11/19/18 at 11:16am, David Hildenbrand wrote:
>> diff --git a/kernel/crash_core.c b/kernel/crash_core.c
>> index 933cb3e45b98..093c9f917ed0 100644
>> --- a/kernel/crash_core.c
>> +++ b/kernel/crash_core.c
>> @@ -464,6 +464,8 @@ static int __init
On Tue, 2018-11-20 at 22:30 +0530, Shreeya Patel wrote:
> ADT7316 driver no more uses platform data and hence use device tree
> data instead of platform data for assigning irq_type field.
> Switch case figures out the type of irq and if it's the default case
> then assign the default value to the
47 matches
Mail list logo
