Re: [dspace-tech] SMTP over TLS Failed

[Douglas Eder Uno Silva]

For me too!

Thanks Cristhian Andres Rey Casadiego !

Em sábado, 12 de março de 2022 às 10:32:30 UTC-3, Chalew Tesfaye escreveu:

> Cristhian's method worked for me too.!
> Thank you
>
> On Thursday, December 9, 2021 at 6:52:58 PM UTC+3 redu@gmail.com 
> wrote:
>
>> Cristhian's method worked for me too.!
>> Thanks for the help.
>>
>> Regards,
>>
>> El viernes, 14 de mayo de 2021 a las 19:03:37 UTC-6, Agboola Raphael 
>> escribió:
>>
>>> Yes,  Cristhian Rey method works for me.
>>> Thanks
>>>
>>> On Thursday, May 6, 2021 at 1:04:42 AM UTC+1 crisan...@gmail.com wrote:
>>>
>>>> Hi everybody I had the same issue in debian and fixed it adding this in 
>>>> dspace.conf:
>>>>
>>>> mail.extraproperties = mail.smtp.socketFactory.port=587, \
>>>>
>>>> mail.smtp.starttls.enable=true, \
>>>>
>>>> mail.smtp.starttls.required=true, \
>>>>
>>>> mail.smtp.ssl.protocols=TLSv1.2
>>>>
>>>>
>>>> Best Regards,
>>>>
>>>>
>>>> Cristhian Rey
>>>>
>>>> Colombia
>>>>
>>>> El miércoles, 17 de marzo de 2021 a las 14:08:24 UTC-5, 
>>>> gonza...@gmail.com escribió:
>>>>
>>>>> Just adding some info I've found troubleshooting the same error 
>>>>> (javax.net.ssl.SSLHandshakeException: No appropriate protocol (protocol 
>>>>> is 
>>>>> disabled or cipher suites are inappropriate)
>>>>>
>>>>> Running DSpace on Centos8 could require that command, depending on 
>>>>> your mail provider, as far as TLS 1.0 and 1.1 are deprecated and a legacy 
>>>>> mode is needed. 
>>>>>
>>>>> This solved the issue to me, using SMTPS under TLS on port 465
>>>>>
>>>>>
>>>>> https://access.redhat.com/documentation/en-us/red_hat_enterprise_linux/8/html/considerations_in_adopting_rhel_8/security_considerations-in-adopting-rhel-8#tls-v10-v11_security
>>>>>
>>>>>
>>>>> El Wednesday, December 9, 2020 a la(s) 5:39:39 PM UTC-3, 
>>>>> hbla...@gmail.com escribió:
>>>>>
>>>>>> Hi for all, 
>>>>>> Today I finally found a solution, the problem was with the operating 
>>>>>> system. execute the following command 
>>>>>>
>>>>>>  update-crypto-policies --set LEGACY  
>>>>>>
>>>>>> and after reboot it has worked.
>>>>>> Thanks to everyone for your support.
>>>>>>
>>>>>> El martes, 8 de diciembre de 2020 a la(s) 16:45:42 UTC-5, 
>>>>>> jacob.cameron escribió:
>>>>>>
>>>>>>> That should have said TLS 1.0 and 1.1 support.
>>>>>>>
>>>>>>>  
>>>>>>>
>>>>>>>  
>>>>>>>
>>>>>>> --
>>>>>>>
>>>>>>> Jake Cameron, BCS(UNB)
>>>>>>>
>>>>>>> Systems Support Specialist III
>>>>>>>
>>>>>>> Information Systems and Technical Services University of Lethbridge 
>>>>>>> Library
>>>>>>>
>>>>>>> Phone:(403)329-2756 <(403)%20329-2756>
>>>>>>>
>>>>>>> This e-mail, including any and all attachments, is only for the use 
>>>>>>> of the intended recipient(s) and may contain information that is 
>>>>>>> confidential or privileged. If you are not the intended recipient, you 
>>>>>>> are 
>>>>>>> advised that any dissemination, copying or other use of this e-mail is 
>>>>>>> prohibited. Please notify the sender of the error in communication by 
>>>>>>> return e-mail and destroy all copies of this e-mail. Thank you.
>>>>>>>
>>>>>>>  
>>>>>>>
>>>>>>> *From:* dspac...@googlegroups.com  *On 
>>>>>>> Behalf Of *Cameron, Jacob
>>>>>>> *Sent:* Tuesday, December 8, 2020 8:54 AM
>>>>>>> *To:* Humberto Blanco Castillo ; DSpace 
>>>>>>> Technical Support 
>>>>>>> *Subject:* RE: [dspace-tech] SMTP over 

Re: [dspace-tech] SMTP over TLS Failed

[Chalew Tesfaye]

Cristhian's method worked for me too.!
Thank you

On Thursday, December 9, 2021 at 6:52:58 PM UTC+3 redu@gmail.com wrote:

> Cristhian's method worked for me too.!
> Thanks for the help.
>
> Regards,
>
> El viernes, 14 de mayo de 2021 a las 19:03:37 UTC-6, Agboola Raphael 
> escribió:
>
>> Yes,  Cristhian Rey method works for me.
>> Thanks
>>
>> On Thursday, May 6, 2021 at 1:04:42 AM UTC+1 crisan...@gmail.com wrote:
>>
>>> Hi everybody I had the same issue in debian and fixed it adding this in 
>>> dspace.conf:
>>>
>>> mail.extraproperties = mail.smtp.socketFactory.port=587, \
>>>
>>> mail.smtp.starttls.enable=true, \
>>>
>>> mail.smtp.starttls.required=true, \
>>>
>>> mail.smtp.ssl.protocols=TLSv1.2
>>>
>>>
>>> Best Regards,
>>>
>>>
>>> Cristhian Rey
>>>
>>> Colombia
>>>
>>> El miércoles, 17 de marzo de 2021 a las 14:08:24 UTC-5, 
>>> gonza...@gmail.com escribió:
>>>
>>>> Just adding some info I've found troubleshooting the same error 
>>>> (javax.net.ssl.SSLHandshakeException: No appropriate protocol (protocol is 
>>>> disabled or cipher suites are inappropriate)
>>>>
>>>> Running DSpace on Centos8 could require that command, depending on your 
>>>> mail provider, as far as TLS 1.0 and 1.1 are deprecated and a legacy mode 
>>>> is needed. 
>>>>
>>>> This solved the issue to me, using SMTPS under TLS on port 465
>>>>
>>>>
>>>> https://access.redhat.com/documentation/en-us/red_hat_enterprise_linux/8/html/considerations_in_adopting_rhel_8/security_considerations-in-adopting-rhel-8#tls-v10-v11_security
>>>>
>>>>
>>>> El Wednesday, December 9, 2020 a la(s) 5:39:39 PM UTC-3, 
>>>> hbla...@gmail.com escribió:
>>>>
>>>>> Hi for all, 
>>>>> Today I finally found a solution, the problem was with the operating 
>>>>> system. execute the following command 
>>>>>
>>>>>  update-crypto-policies --set LEGACY  
>>>>>
>>>>> and after reboot it has worked.
>>>>> Thanks to everyone for your support.
>>>>>
>>>>> El martes, 8 de diciembre de 2020 a la(s) 16:45:42 UTC-5, 
>>>>> jacob.cameron escribió:
>>>>>
>>>>>> That should have said TLS 1.0 and 1.1 support.
>>>>>>
>>>>>>  
>>>>>>
>>>>>>  
>>>>>>
>>>>>> --
>>>>>>
>>>>>> Jake Cameron, BCS(UNB)
>>>>>>
>>>>>> Systems Support Specialist III
>>>>>>
>>>>>> Information Systems and Technical Services University of Lethbridge 
>>>>>> Library
>>>>>>
>>>>>> Phone:(403)329-2756 <(403)%20329-2756>
>>>>>>
>>>>>> This e-mail, including any and all attachments, is only for the use 
>>>>>> of the intended recipient(s) and may contain information that is 
>>>>>> confidential or privileged. If you are not the intended recipient, you 
>>>>>> are 
>>>>>> advised that any dissemination, copying or other use of this e-mail is 
>>>>>> prohibited. Please notify the sender of the error in communication by 
>>>>>> return e-mail and destroy all copies of this e-mail. Thank you.
>>>>>>
>>>>>>  
>>>>>>
>>>>>> *From:* dspac...@googlegroups.com  *On 
>>>>>> Behalf Of *Cameron, Jacob
>>>>>> *Sent:* Tuesday, December 8, 2020 8:54 AM
>>>>>> *To:* Humberto Blanco Castillo ; DSpace Technical 
>>>>>> Support 
>>>>>> *Subject:* RE: [dspace-tech] SMTP over TLS Failed
>>>>>>
>>>>>>  
>>>>>>
>>>>>> Hello Humberto,
>>>>>>
>>>>>>  
>>>>>>
>>>>>> Microsoft has ended TLS 1.0 and TLS 1.2 support for all their mail 
>>>>>> products.  You need to ensure you are using TLS 1.2 or higher on your 
>>>>>> server or the messages will fail.
>>>>>>
>>>>>>  
>>>>>>
>>>>>>  
>>>&

Re: [dspace-tech] SMTP over TLS Failed

[Edu Reyes Delgado]

Cristhian's method worked for me too.!
Thanks for the help.

Regards,

El viernes, 14 de mayo de 2021 a las 19:03:37 UTC-6, Agboola Raphael 
escribió:

> Yes,  Cristhian Rey method works for me.
> Thanks
>
> On Thursday, May 6, 2021 at 1:04:42 AM UTC+1 crisan...@gmail.com wrote:
>
>> Hi everybody I had the same issue in debian and fixed it adding this in 
>> dspace.conf:
>>
>> mail.extraproperties = mail.smtp.socketFactory.port=587, \
>>
>> mail.smtp.starttls.enable=true, \
>>
>> mail.smtp.starttls.required=true, \
>>
>> mail.smtp.ssl.protocols=TLSv1.2
>>
>>
>> Best Regards,
>>
>>
>> Cristhian Rey
>>
>> Colombia
>>
>> El miércoles, 17 de marzo de 2021 a las 14:08:24 UTC-5, 
>> gonza...@gmail.com escribió:
>>
>>> Just adding some info I've found troubleshooting the same error 
>>> (javax.net.ssl.SSLHandshakeException: No appropriate protocol (protocol is 
>>> disabled or cipher suites are inappropriate)
>>>
>>> Running DSpace on Centos8 could require that command, depending on your 
>>> mail provider, as far as TLS 1.0 and 1.1 are deprecated and a legacy mode 
>>> is needed. 
>>>
>>> This solved the issue to me, using SMTPS under TLS on port 465
>>>
>>>
>>> https://access.redhat.com/documentation/en-us/red_hat_enterprise_linux/8/html/considerations_in_adopting_rhel_8/security_considerations-in-adopting-rhel-8#tls-v10-v11_security
>>>
>>>
>>> El Wednesday, December 9, 2020 a la(s) 5:39:39 PM UTC-3, 
>>> hbla...@gmail.com escribió:
>>>
>>>> Hi for all, 
>>>> Today I finally found a solution, the problem was with the operating 
>>>> system. execute the following command 
>>>>
>>>>  update-crypto-policies --set LEGACY  
>>>>
>>>> and after reboot it has worked.
>>>> Thanks to everyone for your support.
>>>>
>>>> El martes, 8 de diciembre de 2020 a la(s) 16:45:42 UTC-5, jacob.cameron 
>>>> escribió:
>>>>
>>>>> That should have said TLS 1.0 and 1.1 support.
>>>>>
>>>>>  
>>>>>
>>>>>  
>>>>>
>>>>> --
>>>>>
>>>>> Jake Cameron, BCS(UNB)
>>>>>
>>>>> Systems Support Specialist III
>>>>>
>>>>> Information Systems and Technical Services University of Lethbridge 
>>>>> Library
>>>>>
>>>>> Phone:(403)329-2756 <(403)%20329-2756>
>>>>>
>>>>> This e-mail, including any and all attachments, is only for the use of 
>>>>> the intended recipient(s) and may contain information that is 
>>>>> confidential 
>>>>> or privileged. If you are not the intended recipient, you are advised 
>>>>> that 
>>>>> any dissemination, copying or other use of this e-mail is prohibited. 
>>>>> Please notify the sender of the error in communication by return e-mail 
>>>>> and 
>>>>> destroy all copies of this e-mail. Thank you.
>>>>>
>>>>>  
>>>>>
>>>>> *From:* dspac...@googlegroups.com  *On 
>>>>> Behalf Of *Cameron, Jacob
>>>>> *Sent:* Tuesday, December 8, 2020 8:54 AM
>>>>> *To:* Humberto Blanco Castillo ; DSpace Technical 
>>>>> Support 
>>>>> *Subject:* RE: [dspace-tech] SMTP over TLS Failed
>>>>>
>>>>>  
>>>>>
>>>>> Hello Humberto,
>>>>>
>>>>>  
>>>>>
>>>>> Microsoft has ended TLS 1.0 and TLS 1.2 support for all their mail 
>>>>> products.  You need to ensure you are using TLS 1.2 or higher on your 
>>>>> server or the messages will fail.
>>>>>
>>>>>  
>>>>>
>>>>>  
>>>>>
>>>>> --
>>>>>
>>>>> Jake Cameron, BCS(UNB)
>>>>>
>>>>> Systems Support Specialist III
>>>>>
>>>>> Information Systems and Technical Services University of Lethbridge 
>>>>> Library
>>>>>
>>>>> Phone:(403)329-2756 <(403)%20329-2756>
>>>>>
>>>>> This e-mail, including any and all attachments, is only for the use of 
>>>

Re: [dspace-tech] SMTP over TLS Failed

[Agboola Raphael]

Yes,  Cristhian Rey method works for me.
Thanks

On Thursday, May 6, 2021 at 1:04:42 AM UTC+1 crisan...@gmail.com wrote:

> Hi everybody I had the same issue in debian and fixed it adding this in 
> dspace.conf:
>
> mail.extraproperties = mail.smtp.socketFactory.port=587, \
>
> mail.smtp.starttls.enable=true, \
>
> mail.smtp.starttls.required=true, \
>
> mail.smtp.ssl.protocols=TLSv1.2
>
>
> Best Regards,
>
>
> Cristhian Rey
>
> Colombia
>
> El miércoles, 17 de marzo de 2021 a las 14:08:24 UTC-5, gonza...@gmail.com 
> escribió:
>
>> Just adding some info I've found troubleshooting the same error 
>> (javax.net.ssl.SSLHandshakeException: No appropriate protocol (protocol is 
>> disabled or cipher suites are inappropriate)
>>
>> Running DSpace on Centos8 could require that command, depending on your 
>> mail provider, as far as TLS 1.0 and 1.1 are deprecated and a legacy mode 
>> is needed. 
>>
>> This solved the issue to me, using SMTPS under TLS on port 465
>>
>>
>> https://access.redhat.com/documentation/en-us/red_hat_enterprise_linux/8/html/considerations_in_adopting_rhel_8/security_considerations-in-adopting-rhel-8#tls-v10-v11_security
>>
>>
>> El Wednesday, December 9, 2020 a la(s) 5:39:39 PM UTC-3, 
>> hbla...@gmail.com escribió:
>>
>>> Hi for all, 
>>> Today I finally found a solution, the problem was with the operating 
>>> system. execute the following command 
>>>
>>>  update-crypto-policies --set LEGACY  
>>>
>>> and after reboot it has worked.
>>> Thanks to everyone for your support.
>>>
>>> El martes, 8 de diciembre de 2020 a la(s) 16:45:42 UTC-5, jacob.cameron 
>>> escribió:
>>>
>>>> That should have said TLS 1.0 and 1.1 support.
>>>>
>>>>  
>>>>
>>>>  
>>>>
>>>> --
>>>>
>>>> Jake Cameron, BCS(UNB)
>>>>
>>>> Systems Support Specialist III
>>>>
>>>> Information Systems and Technical Services University of Lethbridge 
>>>> Library
>>>>
>>>> Phone:(403)329-2756 <(403)%20329-2756>
>>>>
>>>> This e-mail, including any and all attachments, is only for the use of 
>>>> the intended recipient(s) and may contain information that is confidential 
>>>> or privileged. If you are not the intended recipient, you are advised that 
>>>> any dissemination, copying or other use of this e-mail is prohibited. 
>>>> Please notify the sender of the error in communication by return e-mail 
>>>> and 
>>>> destroy all copies of this e-mail. Thank you.
>>>>
>>>>  
>>>>
>>>> *From:* dspac...@googlegroups.com  *On 
>>>> Behalf Of *Cameron, Jacob
>>>> *Sent:* Tuesday, December 8, 2020 8:54 AM
>>>> *To:* Humberto Blanco Castillo ; DSpace Technical 
>>>> Support 
>>>> *Subject:* RE: [dspace-tech] SMTP over TLS Failed
>>>>
>>>>  
>>>>
>>>> Hello Humberto,
>>>>
>>>>  
>>>>
>>>> Microsoft has ended TLS 1.0 and TLS 1.2 support for all their mail 
>>>> products.  You need to ensure you are using TLS 1.2 or higher on your 
>>>> server or the messages will fail.
>>>>
>>>>  
>>>>
>>>>  
>>>>
>>>> --
>>>>
>>>> Jake Cameron, BCS(UNB)
>>>>
>>>> Systems Support Specialist III
>>>>
>>>> Information Systems and Technical Services University of Lethbridge 
>>>> Library
>>>>
>>>> Phone:(403)329-2756 <(403)%20329-2756>
>>>>
>>>> This e-mail, including any and all attachments, is only for the use of 
>>>> the intended recipient(s) and may contain information that is confidential 
>>>> or privileged. If you are not the intended recipient, you are advised that 
>>>> any dissemination, copying or other use of this e-mail is prohibited. 
>>>> Please notify the sender of the error in communication by return e-mail 
>>>> and 
>>>> destroy all copies of this e-mail. Thank you.
>>>>
>>>>  
>>>>
>>>> *From:* dspac...@googlegroups.com  *On 
>>>> Behalf Of *Humberto Blanco Castillo
>>>> *Sent:* Tuesday, December 8, 2020 8:26 AM
>>&

Re: [dspace-tech] SMTP over TLS Failed

[Cristhian Andres Rey Casadiego]

Hi everybody I had the same issue in debian and fixed it adding this in 
dspace.conf:

mail.extraproperties = mail.smtp.socketFactory.port=587, \

mail.smtp.starttls.enable=true, \

mail.smtp.starttls.required=true, \

mail.smtp.ssl.protocols=TLSv1.2


Best Regards,


Cristhian Rey

Colombia

El miércoles, 17 de marzo de 2021 a las 14:08:24 UTC-5, gonza...@gmail.com 
escribió:

> Just adding some info I've found troubleshooting the same error 
> (javax.net.ssl.SSLHandshakeException: No appropriate protocol (protocol is 
> disabled or cipher suites are inappropriate)
>
> Running DSpace on Centos8 could require that command, depending on your 
> mail provider, as far as TLS 1.0 and 1.1 are deprecated and a legacy mode 
> is needed. 
>
> This solved the issue to me, using SMTPS under TLS on port 465
>
>
> https://access.redhat.com/documentation/en-us/red_hat_enterprise_linux/8/html/considerations_in_adopting_rhel_8/security_considerations-in-adopting-rhel-8#tls-v10-v11_security
>
>
> El Wednesday, December 9, 2020 a la(s) 5:39:39 PM UTC-3, hbla...@gmail.com 
> escribió:
>
>> Hi for all, 
>> Today I finally found a solution, the problem was with the operating 
>> system. execute the following command 
>>
>>  update-crypto-policies --set LEGACY  
>>
>> and after reboot it has worked.
>> Thanks to everyone for your support.
>>
>> El martes, 8 de diciembre de 2020 a la(s) 16:45:42 UTC-5, jacob.cameron 
>> escribió:
>>
>>> That should have said TLS 1.0 and 1.1 support.
>>>
>>>  
>>>
>>>  
>>>
>>> --
>>>
>>> Jake Cameron, BCS(UNB)
>>>
>>> Systems Support Specialist III
>>>
>>> Information Systems and Technical Services University of Lethbridge 
>>> Library
>>>
>>> Phone:(403)329-2756 <(403)%20329-2756>
>>>
>>> This e-mail, including any and all attachments, is only for the use of 
>>> the intended recipient(s) and may contain information that is confidential 
>>> or privileged. If you are not the intended recipient, you are advised that 
>>> any dissemination, copying or other use of this e-mail is prohibited. 
>>> Please notify the sender of the error in communication by return e-mail and 
>>> destroy all copies of this e-mail. Thank you.
>>>
>>>  
>>>
>>> *From:* dspac...@googlegroups.com  *On 
>>> Behalf Of *Cameron, Jacob
>>> *Sent:* Tuesday, December 8, 2020 8:54 AM
>>> *To:* Humberto Blanco Castillo ; DSpace Technical 
>>> Support 
>>> *Subject:* RE: [dspace-tech] SMTP over TLS Failed
>>>
>>>  
>>>
>>> Hello Humberto,
>>>
>>>  
>>>
>>> Microsoft has ended TLS 1.0 and TLS 1.2 support for all their mail 
>>> products.  You need to ensure you are using TLS 1.2 or higher on your 
>>> server or the messages will fail.
>>>
>>>  
>>>
>>>  
>>>
>>> --
>>>
>>> Jake Cameron, BCS(UNB)
>>>
>>> Systems Support Specialist III
>>>
>>> Information Systems and Technical Services University of Lethbridge 
>>> Library
>>>
>>> Phone:(403)329-2756 <(403)%20329-2756>
>>>
>>> This e-mail, including any and all attachments, is only for the use of 
>>> the intended recipient(s) and may contain information that is confidential 
>>> or privileged. If you are not the intended recipient, you are advised that 
>>> any dissemination, copying or other use of this e-mail is prohibited. 
>>> Please notify the sender of the error in communication by return e-mail and 
>>> destroy all copies of this e-mail. Thank you.
>>>
>>>  
>>>
>>> *From:* dspac...@googlegroups.com  *On 
>>> Behalf Of *Humberto Blanco Castillo
>>> *Sent:* Tuesday, December 8, 2020 8:26 AM
>>> *To:* DSpace Technical Support 
>>> *Subject:* [dspace-tech] SMTP over TLS Failed
>>>
>>>  
>>>
>>> Caution: This email was sent from someone *outside of the University of 
>>> Lethbridge*. Do not click on links or open attachments unless you know 
>>> they are safe. Suspicious emails should be forwarded to phis...@uleth.ca
>>> .
>>>
>>>  
>>>
>>> My dspace server was working with the following configuration 
>>>
>>>  
>>>
>>> *mail.server = outlook.office365.com <http://outlook.office365.com>*

Re: [dspace-tech] SMTP over TLS Failed

[gonza...@gmail.com]

Just adding some info I've found troubleshooting the same error 
(javax.net.ssl.SSLHandshakeException: No appropriate protocol (protocol is 
disabled or cipher suites are inappropriate)

Running DSpace on Centos8 could require that command, depending on your 
mail provider, as far as TLS 1.0 and 1.1 are deprecated and a legacy mode 
is needed. 

This solved the issue to me, using SMTPS under TLS on port 465

https://access.redhat.com/documentation/en-us/red_hat_enterprise_linux/8/html/considerations_in_adopting_rhel_8/security_considerations-in-adopting-rhel-8#tls-v10-v11_security


El Wednesday, December 9, 2020 a la(s) 5:39:39 PM UTC-3, hbla...@gmail.com 
escribió:

> Hi for all, 
> Today I finally found a solution, the problem was with the operating 
> system. execute the following command 
>
>  update-crypto-policies --set LEGACY  
>
> and after reboot it has worked.
> Thanks to everyone for your support.
>
> El martes, 8 de diciembre de 2020 a la(s) 16:45:42 UTC-5, jacob.cameron 
> escribió:
>
>> That should have said TLS 1.0 and 1.1 support.
>>
>>  
>>
>>  
>>
>> --
>>
>> Jake Cameron, BCS(UNB)
>>
>> Systems Support Specialist III
>>
>> Information Systems and Technical Services University of Lethbridge 
>> Library
>>
>> Phone:(403)329-2756 <(403)%20329-2756>
>>
>> This e-mail, including any and all attachments, is only for the use of 
>> the intended recipient(s) and may contain information that is confidential 
>> or privileged. If you are not the intended recipient, you are advised that 
>> any dissemination, copying or other use of this e-mail is prohibited. 
>> Please notify the sender of the error in communication by return e-mail and 
>> destroy all copies of this e-mail. Thank you.
>>
>>  
>>
>> *From:* dspac...@googlegroups.com  *On Behalf 
>> Of *Cameron, Jacob
>> *Sent:* Tuesday, December 8, 2020 8:54 AM
>> *To:* Humberto Blanco Castillo ; DSpace Technical 
>> Support 
>> *Subject:* RE: [dspace-tech] SMTP over TLS Failed
>>
>>  
>>
>> Hello Humberto,
>>
>>  
>>
>> Microsoft has ended TLS 1.0 and TLS 1.2 support for all their mail 
>> products.  You need to ensure you are using TLS 1.2 or higher on your 
>> server or the messages will fail.
>>
>>  
>>
>>  
>>
>> --
>>
>> Jake Cameron, BCS(UNB)
>>
>> Systems Support Specialist III
>>
>> Information Systems and Technical Services University of Lethbridge 
>> Library
>>
>> Phone:(403)329-2756 <(403)%20329-2756>
>>
>> This e-mail, including any and all attachments, is only for the use of 
>> the intended recipient(s) and may contain information that is confidential 
>> or privileged. If you are not the intended recipient, you are advised that 
>> any dissemination, copying or other use of this e-mail is prohibited. 
>> Please notify the sender of the error in communication by return e-mail and 
>> destroy all copies of this e-mail. Thank you.
>>
>>  
>>
>> *From:* dspac...@googlegroups.com  *On Behalf 
>> Of *Humberto Blanco Castillo
>> *Sent:* Tuesday, December 8, 2020 8:26 AM
>> *To:* DSpace Technical Support 
>> *Subject:* [dspace-tech] SMTP over TLS Failed
>>
>>  
>>
>> Caution: This email was sent from someone *outside of the University of 
>> Lethbridge*. Do not click on links or open attachments unless you know 
>> they are safe. Suspicious emails should be forwarded to phis...@uleth.ca.
>>
>>  
>>
>> My dspace server was working with the following configuration 
>>
>>  
>>
>> *mail.server = outlook.office365.com <http://outlook.office365.com>*
>>
>> *mail.server.username = **myu...@mydomain.com*
>>
>> *mail.server.password = mypassword*
>>
>> *mail.server.port = 587*
>>
>> *mail.from.address = **myu...@mydomain.com*
>>
>> *mail.feedback.recipient = ${mail.from.address}*
>>
>> *mail.admin = ${mail.from.address}*
>>
>> *mail.alert.recipient = ${mail.from.address}*
>>
>> *mail.registration.notify = ${mail.from.address}*
>>
>>  
>>
>> *mail.extraproperties =  mail.smtp.starttls.enable=true, \*
>>
>> *mail.smtp.socketFactory.port=587, \*
>>
>> *mail.smtp.socketFactory.fallback=false*
>>
>>  
>>
>> But a few days ago it stopped working,:
>>
>>  
>>
>> *About to send test email:*
>>
>> * - To: **myu...@mydomain.com*
>>
&

Re: [dspace-tech] SMTP over TLS Failed

[Humberto Blanco Castillo]

Hi for all, 
Today I finally found a solution, the problem was with the operating 
system. execute the following command 

 update-crypto-policies --set LEGACY  

and after reboot it has worked.
Thanks to everyone for your support.

El martes, 8 de diciembre de 2020 a la(s) 16:45:42 UTC-5, jacob.cameron 
escribió:

> That should have said TLS 1.0 and 1.1 support.
>
>  
>
>  
>
> --
>
> Jake Cameron, BCS(UNB)
>
> Systems Support Specialist III
>
> Information Systems and Technical Services University of Lethbridge Library
>
> Phone:(403)329-2756 <(403)%20329-2756>
>
> This e-mail, including any and all attachments, is only for the use of the 
> intended recipient(s) and may contain information that is confidential or 
> privileged. If you are not the intended recipient, you are advised that any 
> dissemination, copying or other use of this e-mail is prohibited. Please 
> notify the sender of the error in communication by return e-mail and 
> destroy all copies of this e-mail. Thank you.
>
>  
>
> *From:* dspac...@googlegroups.com  *On Behalf 
> Of *Cameron, Jacob
> *Sent:* Tuesday, December 8, 2020 8:54 AM
> *To:* Humberto Blanco Castillo ; DSpace Technical 
> Support 
> *Subject:* RE: [dspace-tech] SMTP over TLS Failed
>
>  
>
> Hello Humberto,
>
>  
>
> Microsoft has ended TLS 1.0 and TLS 1.2 support for all their mail 
> products.  You need to ensure you are using TLS 1.2 or higher on your 
> server or the messages will fail.
>
>  
>
>  
>
> --
>
> Jake Cameron, BCS(UNB)
>
> Systems Support Specialist III
>
> Information Systems and Technical Services University of Lethbridge Library
>
> Phone:(403)329-2756 <(403)%20329-2756>
>
> This e-mail, including any and all attachments, is only for the use of the 
> intended recipient(s) and may contain information that is confidential or 
> privileged. If you are not the intended recipient, you are advised that any 
> dissemination, copying or other use of this e-mail is prohibited. Please 
> notify the sender of the error in communication by return e-mail and 
> destroy all copies of this e-mail. Thank you.
>
>  
>
> *From:* dspac...@googlegroups.com  *On Behalf 
> Of *Humberto Blanco Castillo
> *Sent:* Tuesday, December 8, 2020 8:26 AM
> *To:* DSpace Technical Support 
> *Subject:* [dspace-tech] SMTP over TLS Failed
>
>  
>
> Caution: This email was sent from someone *outside of the University of 
> Lethbridge*. Do not click on links or open attachments unless you know 
> they are safe. Suspicious emails should be forwarded to phis...@uleth.ca.
>
>  
>
> My dspace server was working with the following configuration 
>
>  
>
> *mail.server = outlook.office365.com <http://outlook.office365.com>*
>
> *mail.server.username = **myu...@mydomain.com*
>
> *mail.server.password = mypassword*
>
> *mail.server.port = 587*
>
> *mail.from.address = **myu...@mydomain.com*
>
> *mail.feedback.recipient = ${mail.from.address}*
>
> *mail.admin = ${mail.from.address}*
>
> *mail.alert.recipient = ${mail.from.address}*
>
> *mail.registration.notify = ${mail.from.address}*
>
>  
>
> *mail.extraproperties =  mail.smtp.starttls.enable=true, \*
>
> *mail.smtp.socketFactory.port=587, \*
>
> *mail.smtp.socketFactory.fallback=false*
>
>  
>
> But a few days ago it stopped working,:
>
>  
>
> *About to send test email:*
>
> * - To: **myu...@mydomain.com*
>
> * - Subject: DSpace test email*
>
> * - Server: outlook.office365.com <http://outlook.office365.com>*
>
>  
>
>  
>
> *Error sending email:*
>
> * - Error: javax.mail.SendFailedException: Send failure 
> (javax.mail.MessagingException: Could not convert socket to TLS 
> (javax.net.ssl.SSLHandshakeException: No appropriate protocol (protocol is 
> disabled or cipher suites are inappropriate)))*
>
>  
>
>  
>
> the only modification its that now we are working with openjdk
>
> *openjdk version "1.8.0_272"*
>
> *OpenJDK Runtime Environment (build 1.8.0_272-b10)*
>
> *OpenJDK 64-Bit Server VM (build 25.272-b10, mixed mode)*
>
>  
>
>  
>
> Any knows why of this error, or giveme any ligtha about this?
>
>  
>
> really appreciate your help
>
>  
>
>  
>
>  
>
> Humberto,
>
>  
>
>  
>
> -- 
> All messages to this mailing list should adhere to the DuraSpace Code of 
> Conduct: https://duraspace.org/about/policies/code-of-conduct/
> --- 
> You received this message because you are subscribed to the Google Groups 
> "DSpace Technical Support

RE: [dspace-tech] SMTP over TLS Failed

[Cameron, Jacob]

That should have said TLS 1.0 and 1.1 support.


--
Jake Cameron, BCS(UNB)
Systems Support Specialist III
Information Systems and Technical Services University of Lethbridge Library
Phone:(403)329-2756
This e-mail, including any and all attachments, is only for the use of the 
intended recipient(s) and may contain information that is confidential or 
privileged. If you are not the intended recipient, you are advised that any 
dissemination, copying or other use of this e-mail is prohibited. Please notify 
the sender of the error in communication by return e-mail and destroy all 
copies of this e-mail. Thank you.

From: dspace-tech@googlegroups.com  On Behalf Of 
Cameron, Jacob
Sent: Tuesday, December 8, 2020 8:54 AM
To: Humberto Blanco Castillo ; DSpace Technical Support 

Subject: RE: [dspace-tech] SMTP over TLS Failed

Hello Humberto,

Microsoft has ended TLS 1.0 and TLS 1.2 support for all their mail products.  
You need to ensure you are using TLS 1.2 or higher on your server or the 
messages will fail.


--
Jake Cameron, BCS(UNB)
Systems Support Specialist III
Information Systems and Technical Services University of Lethbridge Library
Phone:(403)329-2756
This e-mail, including any and all attachments, is only for the use of the 
intended recipient(s) and may contain information that is confidential or 
privileged. If you are not the intended recipient, you are advised that any 
dissemination, copying or other use of this e-mail is prohibited. Please notify 
the sender of the error in communication by return e-mail and destroy all 
copies of this e-mail. Thank you.

From: dspace-tech@googlegroups.com<mailto:dspace-tech@googlegroups.com> 
mailto:dspace-tech@googlegroups.com>> On Behalf 
Of Humberto Blanco Castillo
Sent: Tuesday, December 8, 2020 8:26 AM
To: DSpace Technical Support 
mailto:dspace-tech@googlegroups.com>>
Subject: [dspace-tech] SMTP over TLS Failed

Caution: This email was sent from someone outside of the University of 
Lethbridge. Do not click on links or open attachments unless you know they are 
safe. Suspicious emails should be forwarded to 
phish...@uleth.ca<mailto:phish...@uleth.ca>.

My dspace server was working with the following configuration

mail.server = outlook.office365.com
mail.server.username = myu...@mydomain.com<mailto:myu...@mydomain.com>
mail.server.password = mypassword
mail.server.port = 587
mail.from.address = myu...@mydomain.com<mailto:myu...@mydomain.com>
mail.feedback.recipient = ${mail.from.address}
mail.admin = ${mail.from.address}
mail.alert.recipient = ${mail.from.address}
mail.registration.notify = ${mail.from.address}

mail.extraproperties =  mail.smtp.starttls.enable=true, \
mail.smtp.socketFactory.port=587, \
mail.smtp.socketFactory.fallback=false

But a few days ago it stopped working,:

About to send test email:
 - To: myu...@mydomain.com<mailto:myu...@mydomain.com>
 - Subject: DSpace test email
 - Server: outlook.office365.com


Error sending email:
 - Error: javax.mail.SendFailedException: Send failure 
(javax.mail.MessagingException: Could not convert socket to TLS 
(javax.net.ssl.SSLHandshakeException: No appropriate protocol (protocol is 
disabled or cipher suites are inappropriate)))


the only modification its that now we are working with openjdk
openjdk version "1.8.0_272"
OpenJDK Runtime Environment (build 1.8.0_272-b10)
OpenJDK 64-Bit Server VM (build 25.272-b10, mixed mode)


Any knows why of this error, or giveme any ligtha about this?

really appreciate your help



Humberto,


--
All messages to this mailing list should adhere to the DuraSpace Code of 
Conduct: https://duraspace.org/about/policies/code-of-conduct/
---
You received this message because you are subscribed to the Google Groups 
"DSpace Technical Support" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to 
dspace-tech+unsubscr...@googlegroups.com<mailto:dspace-tech+unsubscr...@googlegroups.com>.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/dspace-tech/f92ecb2e-d98d-4535-944a-d7b7e1eba897n%40googlegroups.com<https://groups.google.com/d/msgid/dspace-tech/f92ecb2e-d98d-4535-944a-d7b7e1eba897n%40googlegroups.com?utm_medium=email_source=footer>.
--
All messages to this mailing list should adhere to the DuraSpace Code of 
Conduct: https://duraspace.org/about/policies/code-of-conduct/
---
You received this message because you are subscribed to the Google Groups 
"DSpace Technical Support" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to 
dspace-tech+unsubscr...@googlegroups.com<mailto:dspace-tech+unsubscr...@googlegroups.com>.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/dspace-tech/QB1PR01MB3908DF0263E484EF3720CD0984CD0%40QB1PR01MB3908.CANPRD01.PROD.OUTLOOK.COM<https://groups.google.com/d/msgid

RE: [dspace-tech] SMTP over TLS Failed

[Cameron, Jacob]

Hello Humberto,

Microsoft has ended TLS 1.0 and TLS 1.2 support for all their mail products.  
You need to ensure you are using TLS 1.2 or higher on your server or the 
messages will fail.


--
Jake Cameron, BCS(UNB)
Systems Support Specialist III
Information Systems and Technical Services University of Lethbridge Library
Phone:(403)329-2756
This e-mail, including any and all attachments, is only for the use of the 
intended recipient(s) and may contain information that is confidential or 
privileged. If you are not the intended recipient, you are advised that any 
dissemination, copying or other use of this e-mail is prohibited. Please notify 
the sender of the error in communication by return e-mail and destroy all 
copies of this e-mail. Thank you.

From: dspace-tech@googlegroups.com  On Behalf Of 
Humberto Blanco Castillo
Sent: Tuesday, December 8, 2020 8:26 AM
To: DSpace Technical Support 
Subject: [dspace-tech] SMTP over TLS Failed

Caution: This email was sent from someone outside of the University of 
Lethbridge. Do not click on links or open attachments unless you know they are 
safe. Suspicious emails should be forwarded to 
phish...@uleth.ca.

My dspace server was working with the following configuration

mail.server = outlook.office365.com
mail.server.username = myu...@mydomain.com
mail.server.password = mypassword
mail.server.port = 587
mail.from.address = myu...@mydomain.com
mail.feedback.recipient = ${mail.from.address}
mail.admin = ${mail.from.address}
mail.alert.recipient = ${mail.from.address}
mail.registration.notify = ${mail.from.address}

mail.extraproperties =  mail.smtp.starttls.enable=true, \
mail.smtp.socketFactory.port=587, \
mail.smtp.socketFactory.fallback=false

But a few days ago it stopped working,:

About to send test email:
 - To: myu...@mydomain.com
 - Subject: DSpace test email
 - Server: outlook.office365.com


Error sending email:
 - Error: javax.mail.SendFailedException: Send failure 
(javax.mail.MessagingException: Could not convert socket to TLS 
(javax.net.ssl.SSLHandshakeException: No appropriate protocol (protocol is 
disabled or cipher suites are inappropriate)))


the only modification its that now we are working with openjdk
openjdk version "1.8.0_272"
OpenJDK Runtime Environment (build 1.8.0_272-b10)
OpenJDK 64-Bit Server VM (build 25.272-b10, mixed mode)


Any knows why of this error, or giveme any ligtha about this?

really appreciate your help



Humberto,


--
All messages to this mailing list should adhere to the DuraSpace Code of 
Conduct: https://duraspace.org/about/policies/code-of-conduct/
---
You received this message because you are subscribed to the Google Groups 
"DSpace Technical Support" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to 
dspace-tech+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/dspace-tech/f92ecb2e-d98d-4535-944a-d7b7e1eba897n%40googlegroups.com.

-- 
All messages to this mailing list should adhere to the DuraSpace Code of 
Conduct: https://duraspace.org/about/policies/code-of-conduct/
--- 
You received this message because you are subscribed to the Google Groups 
"DSpace Technical Support" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to dspace-tech+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/dspace-tech/QB1PR01MB3908DF0263E484EF3720CD0984CD0%40QB1PR01MB3908.CANPRD01.PROD.OUTLOOK.COM.

Re: [dspace-tech] SMTP over TLS Failed

[Jose Blanco]

Humberto,

I'm not sure, but from googling around I see that "You may get this error
when you are trying to send an e-mail using gmail server in java."

Try making this change:

mail.extraproperties =  mail.smtp.starttls.enable=true, \
mail.smtp.socketFactory.port=587, \
mail.smtp.socketFactory.fallback=false*, \*
*mail.smtp.ssl.trust=smtp.gmail.com
*

I saw this suggestion here:
http://javainfinite.com/error-and-solution/javax-mail-messagingexception-could-not-convert-socket-to-tls/

Maybe it's not the gmail server but the mail server you are using,  so
smtp.gmail.com might need to be *outlook.office365.com
*.

This is really just a guess.

Hope it helps.
-Jose

On Tue, Dec 8, 2020 at 10:25 AM Humberto Blanco Castillo <
hblanc...@gmail.com> wrote:

> My dspace server was working with the following configuration
>
> *mail.server = outlook.office365.com *
> *mail.server.username = myu...@mydomain.com *
> *mail.server.password = mypassword*
> *mail.server.port = 587*
> *mail.from.address = myu...@mydomain.com *
> *mail.feedback.recipient = ${mail.from.address}*
> *mail.admin = ${mail.from.address}*
> *mail.alert.recipient = ${mail.from.address}*
> *mail.registration.notify = ${mail.from.address}*
>
> *mail.extraproperties =  mail.smtp.starttls.enable=true, \*
>
> *mail.smtp.socketFactory.port=587, \*
> *mail.smtp.socketFactory.fallback=false*
>
> But a few days ago it stopped working,:
>
> *About to send test email:*
> * - To: myu...@mydomain.com *
> * - Subject: DSpace test email*
> * - Server: outlook.office365.com *
>
>
> *Error sending email:*
> * - Error: javax.mail.SendFailedException: Send failure
> (javax.mail.MessagingException: Could not convert socket to TLS
> (javax.net.ssl.SSLHandshakeException: No appropriate protocol (protocol is
> disabled or cipher suites are inappropriate)))*
>
>
> the only modification its that now we are working with openjdk
> *openjdk version "1.8.0_272"*
> *OpenJDK Runtime Environment (build 1.8.0_272-b10)*
> *OpenJDK 64-Bit Server VM (build 25.272-b10, mixed mode)*
>
>
> Any knows why of this error, or giveme any ligtha about this?
>
> really appreciate your help
>
>
>
> Humberto,
>
>
> --
> All messages to this mailing list should adhere to the DuraSpace Code of
> Conduct: https://duraspace.org/about/policies/code-of-conduct/
> ---
> You received this message because you are subscribed to the Google Groups
> "DSpace Technical Support" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to dspace-tech+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/dspace-tech/f92ecb2e-d98d-4535-944a-d7b7e1eba897n%40googlegroups.com
> 
> .
>

-- 
All messages to this mailing list should adhere to the DuraSpace Code of 
Conduct: https://duraspace.org/about/policies/code-of-conduct/
--- 
You received this message because you are subscribed to the Google Groups 
"DSpace Technical Support" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to dspace-tech+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/dspace-tech/CAK%3DKc-u3B-t_6L0FV%3DYwuPGOkSK3MRMv_Mi2_BUfDzNK1upe%3Dw%40mail.gmail.com.