Hello Group,
Has anyone run into this problem with the RP2000V repeater:
at 25 watts i have the worst desense that I've seen in many years, I've
owned and built many repeaters over the years
for my-self and many groups but this is the worst, with a 4 can
duplexer's and a pass cavity i
This link may be helpful. Your mileage may very.
http://www.bosshardradio.com/dstarrepeatertesting/dstarrepeatertesting.htm
--- In dstar_digital@yahoogroups.com, Radioman radioma...@... wrote:
Hello Group,
Has anyone run into this problem with the RP2000V repeater:
at 25 watts
well to start with the outside signal is garbled up until i switch to
low then the user clears up, when switching back to hi he gets garbled
up again and when the user unkeys i here 2 seconds of robotic noise, and
the robotic noise does not happen on low.
i think that clear enough desense, with
Hi Group,
We are busy setting up a new D-Star system in Curacao, Caribbean. Due to a
frequency issue, we had to exchange some items with Icom. During this process,
the CDROM with the drivers and config software got 'misplaced'. Can anybody
help me with a copy/email or FTP site where I can
honestly i don't think you could ask for any better then that, but the
desense sounds like i have no duplexer's
and I'm starting to point at the poor construction of this over sized
empty box and shielding mobile radios give you
Hmm, well there are many ‘poor construction over sized empty
ya, thats a nice way to test it out...
i'll try the patch cables first, then work from there
but at this point you can see my frustration..
Tony
NN1D
On Nov 27, 2009, at 10:09 AM, Radioman wrote:
Has anyone run into this problem with the RP2000V repeater:
at 25 watts i have the worst desense that I've seen in many years, I've
owned and built many repeaters over the years
for my-self and many groups but this is the worst, with a 4 can
Well
At least I'm not alone
I presume I have the same problem, and I didn't relize I needed 90
plus isolation, so I'll swap out the 4 pack for the 6 pack I have and
check things out, did u swap out the internal jumpers?
Thanks for the reply and better news!
73 -
Tony
Sent from my iPod
On
Hi Tony;
I think you will find that this may be the
problem as I could have swore that the old
duplexers were enough to do it. As for the
jumpers yes we purchased brand new double
shielded RG-142 with new N connectors between the
repeater band pass filter and duplexers just to
make sure.
Shanon,
I'm fwding this for info.
On Nov 27, 2009, at 5:19 PM, Allan Boyd ve3...@vianet.ca
mailto:ve3...@vianet.ca wrote:
Greetings Tony;
Well after reading your e-mail let me know you
are not alone with this problem with desense with
the Icom D-Star 2 meter repeater. Our D-Star
10 matches
Mail list logo