sri off topic but I have tried some ICOM reflectors with bounced mail.....
pse help???
IC-706 Mark 2 problem:
Symptoms
Sudenly stopped the variable RF output function. And, the RF power out
meter now shows nothing , but RF is being output at about 150 watts.
Happened
when I had it hooked correctly to an IC-2KL that worked with it before
moving the whole set up to a new desk. I keyed down with the menu allowing
me to adjust RF power out to 50 watts. Worked ok but 2KL went to fault for
unknown reason. Reset 2kl and keyed CW on 706 again. This time, the 2kl
faulted off and the 706 RF power output meter stopped showing anything. The
meter will show ALC and small SWR, but no PO. Also, at the same time, the
706 now (off the amplifier) will only output about 5 watts and with slight
turn of knob goes to full output with no gradient of po allowed. AND, the
RF out is now about 180 watts on 20m and at least 130 watts out on all other
bands. (Earlier it was only full 100 watts on all bands).
What happened? and how can I fix it???
Big thanks and 73
Charles Harpole, HS0ZCW
[EMAIL PROTECTED]
_________________________________________________________________
Turn searches into helpful donations. Make your search count.
http://click4thecause.live.com/search/charity/default.aspx?source=hmemtagline_donation&FORM=WLMTAG
Subscribe/unsubscribe, feedback, FAQ, problems
http://njdxa.org/dx-chat
To post a message, DX related items only, dx-chat@njdxa.org
This is the DX-CHAT reflector sponsored by the NJDXA
http://njdxa.org