Re: [DX-CHAT] How do we make better DXers?

2006-08-03 Thread lmecseri -KE1F

Charlie,

Good work.

Going by the numbers (1-0) don't take into consideration propagation.

Numbers are no longer connected to geographical location. You know W1,2 
and 3 have different propagations as W4s.


Where do I belong? My call is W1 but located in W4 land. Yes I can try 
KE1F/4 when 4s are called. ( that is another story, I had been yelled at 
doing that many years ago)


73s

Lou  KE1F in Florida


Charles Harpole wrote:


The answer to this question is MAKE BETTER DXPEDITION OPERATORS.

The main reason ordinarily placid people become caller mad men is 
simple FRUSTRATION !


How to reduce frustration?

1.  The DX op must be a general, establish a calling pattern and never 
never vary.


2.  The DX op should call by numbers in this way call one one and 
then one two and then one three, and so on.  This method has many 
benefits the largest of which is it reduces the FRUSTRATION level of 
the callers  90% of the bad callers are just regular people who 
have been driven temporarily crazy by a bad DX operator's methods.  
The other 10% are just crazy, probably at birth.

Results of call by numbers are:

-Makes absolutely clear when one should call no ambiguity which 
leads to FRUSTRATION.
-Allows callers to break away from the rig for a few minutes to get 
coffee or something without losing any calling time.  A break reduces 
FRUSTRATION.
-This method eliminates the gripes that he is favoring JA or he is 
only working the East Coast when my area is really in the best 
propagation now.  All ones are equal this way yielding lowered 
FRUSTRATION.
-The DX op can slightly vary from this pattern if there are vastly 
more of one number than all others.


3. DX op must establish a reasonable split (10 kc?) and must MOVE FREQ 
AFTER EVERY QSO and move in the same direction.  This is a pain for 
the DX op, but it REDUCES FRUSTRATION because callers can select a 
freq and STAY THERE instead of doing the guessing game and moving 
around a lot.  This eliminates tail-enders --which, when taken, 
increases other callers' FRUSTRATION.  It also eliminates the extra 
deep pile on the freq. where a good QSO was just completed.  (The time 
lost in moving freq. is made up by a more orderly pile up.)


4.  The DX op should give QSL info and state his op method every half 
hour.  Anyone can wait a half hour and knowing the info is on sked 
reduces FRUSTRATION.


5.  The DX op must NEVER call a partial and then go back to someone 
else with none of the first letters nor numbers Bad Example is 
QRZ  the W3 and then G7XXX ur 59 .  The op must stick with his 
partial forever if it takes that, otherwise there is no reason to 
stand by if the DX is just going to take anyone regardless of his 
directed QRZ.


6 and a pet complaint  do not claim u r at a DX location to do 
propagation experiments and then send only 5-9 sig reports.  Oh, well.


Hams who live near frequent offenders must take it on themselves to 
take the bad guy to lunch (ideally in a group) and gently get to the 
point of his bad ops.  Suggest alternatives, be helpful, but pass the 
message that we hear u and do not like it IN PERSON.


73,

Charles Harpole, HS0ZCW
[EMAIL PROTECTED]






Charles Harpole
[EMAIL PROTECTED]


Subscribe/unsubscribe, feedback, FAQ, problems http://njdxa.org/dx-chat

To post a message, DX related items only, dx-chat@njdxa.org

This is the DX-CHAT reflector sponsored by the NJDXA http://njdxa.org



Subscribe/unsubscribe, feedback, FAQ, problems 
http://njdxa.org/dx-chat


To post a message, DX related items only, dx-chat@njdxa.org

This is the DX-CHAT reflector sponsored by the NJDXA 
http://njdxa.org




Re: [DX-CHAT] How do we make better DXers?

2006-08-03 Thread Dan Zimmerman N3OX

The US call districts are still mostly populated by the right numbers,
though this is a good point, especially when taken worldwide.

Calling one 1 and then one 2 and one 3 and so forth has the advantage
of NOT taking into account propagation (you're not trying to get only
1's, 2's, 3's before the band closes)

What it does do if done correctly is slashes the pileup size on
average by a factor of TEN and makes the other 9 numbers very patient
because they know that in a few QSO's they get their chance.

They can, as Charlie said, go get some coffee, or they can spend the
next nine QSO's listening and coming up with a calling strategy.  It
takes the pressure off. It's less stressful than taking ten or twenty
from each district as propagation fades out.  Having worked
DXpeditions that are using this method, I think it's a great way to
thin a pileup.  Since a lot of successful pileup breaking is listening
and thinking, this gives you 9 out of every 10 QSO's to work on that
instead of yelling into the microphone.

73,
Dan
Subscribe/unsubscribe, feedback, FAQ, problems 
http://njdxa.org/dx-chat


To post a message, DX related items only, dx-chat@njdxa.org

This is the DX-CHAT reflector sponsored by the NJDXA 
http://njdxa.org




Re: [DX-CHAT] How do we make better DXers?

2006-08-03 Thread Dan Zimmerman N3OX

Peter,

I'm never more frustrated than when I'm losing propagation and the DX
takes 15 4's then 15 5's then 15 6's then 15 7's then ***permanent
fade***  ... I would have had 4 other shots to work them if they were
only taking 1 per district. Guess it's a matter of personal
preference.

Dan
Subscribe/unsubscribe, feedback, FAQ, problems 
http://njdxa.org/dx-chat


To post a message, DX related items only, dx-chat@njdxa.org

This is the DX-CHAT reflector sponsored by the NJDXA 
http://njdxa.org




Re: [DX-CHAT] How do we make better DXers?

2006-08-03 Thread Dan Zimmerman N3OX

Peter, you make a good point.

Regarding 3Y0X, I think it probably goes to show that the raw skill of
the operators at pileup handling is much more important than any
subtle variations in technique.  I certainly had a lot easier time
getting through to them (3 bands) than to KH8SI (zero bands).

Actually, I felt a little silly later on in the 3Y0X operation,
because I duped them on 30m (as per their request when the log wasn't
working) because the first contact was a bit questionable, and so in
the first few days of the operation I fought through the 30m pileup
twice with my little invisible doublet and 100W, only to have them
begging for contacts by the end of the operation.  Even when the
pileup was enormous, though, I knew there would be some way to get
through.  The rate was good, the ops were predictable and in control.

I *think* they were working by numbers on 40M SSB when I got them but
I don't remember for sure.  I feel like I just happened to tune to
them to see how their SSB sig compared to CW and they were on 2's so I
figured I'd dump my call in when the 3's came around.  I almost fell
off my seat when they came back, I usually don't even consider 40M SSB
a useful DX band-mode given my antenna and power, but after the
contact was over I listened on my TX frequency and only a handful were
calling.

Dan
Subscribe/unsubscribe, feedback, FAQ, problems 
http://njdxa.org/dx-chat


To post a message, DX related items only, dx-chat@njdxa.org

This is the DX-CHAT reflector sponsored by the NJDXA 
http://njdxa.org




Re: [DX-CHAT] How do we make better DXers?

2006-08-03 Thread Pete D'Elia





98% of the operators going to rare  semi-rare entities are very good 
at what they do. 99% of the problems with these operations are caused by us, the 
callers, by not following DXpedition’s instructions  requests, callers not 
knowing there own call signs, call area, country or continent, 20 people 
screaming up, lid, or 59 to some guy that forget to check which VFO he was on, 
etc.. That’s what really slows the rate down. 

It’s like a child saying they didn’t get good grades, 
because it was the teacher fault. They won’t admit that they didn’t pay 
attention, follow instructions or study. 


Most of us, including myself forget that these ops are typically in 
extremely hot or cold climates, sleeping in tents, constant generator noises, 
running to filling generators, using temporary stations/antennas, physically and 
mentally drained from hauling, setting up and anticipating breakdown, sleep 
deprived, constant buzz saw noise of thousands constantly calling and fitting 
off insects and rodents. With all that, they must be thrilled to hear, what 
about 2s you skipped over us, whyare working JAs instead of NA, is this an 
SSB operation only - why, you worked eight 1s and only six 2s, your splits to 
wide, can you go to 12 CW right now I need you there, listen for my friend he's 
going to call you next, are you going to use LoTW, etc.by of a bunch of guys sitting in their 
comfortable shacks. 

Whoever isgoing or pay the bills should have the 
final word on how they want to run THEIR operation. All we shouldsay 
tothem is; thank you for being there, I appreciate your sacrifice, expense 
andwhat you're doing for us. 

73
Pete N2LM

  - Original Message - 
  From: Dan Zimmerman N3OX 
  To: dx-chat@njdxa.org 
  Sent: Thursday, August 03, 2006 10:15 
  AM
  Subject: Re: [DX-CHAT] How do we make 
  better DXers?
  The US call districts are still mostly populated by the right 
  numbers,though this is a good point, especially when taken 
  worldwide.Calling one 1 and then one 2 and one 3 and so forth has the 
  advantageof NOT taking into account propagation (you're not trying to get 
  only1's, 2's, 3's before the band closes)What it does do if done 
  correctly is slashes the pileup size onaverage by a factor of TEN and 
  makes the other 9 numbers very patientbecause they know that in a few 
  QSO's they get their chance.They can, as Charlie said, go get some 
  coffee, or they can spend thenext nine QSO's listening and coming up with 
  a calling strategy. Ittakes the pressure off. It's less stressful 
  than taking ten or twentyfrom each district as propagation fades 
  out. Having workedDXpeditions that are using this method, I think 
  it's a great way tothin a pileup. Since a lot of successful pileup 
  breaking is listeningand thinking, this gives you 9 out of every 10 QSO's 
  to work on thatinstead of yelling into the 
  microphone.73,DanSubscribe/unsubscribe, feedback, FAQ, 
  problems http://njdxa.org/dx-chatTo post a 
  message, DX related items only, dx-chat@njdxa.orgThis is the 
  DX-CHAT reflector sponsored by the NJDXA http://njdxa.org


RE: [DX-CHAT] How do we make better DXers?

2006-07-31 Thread Don
Excellent SSB OP this morning on 3798/3804) --- he heard AC7 and kept
beating back the pileup until he heard AC7Z, then AC7ZG, then kept beating
back the pileup until he completed the QSO.  Many Many times Standby
Standby Standby...AC7 ONLY AC7 ONLY.  After this, lots of JA's and 6's
calling over the 7's (he was calling 7's only)

(and the op on CW 30m last night was superb -- he had a high runrate, and
was worked quickly. Wish he would move to 20m tonight to give that pileup a
chance).

73
Don
AC7ZG

-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of
Jim Reisert AD1C
Sent: Sunday, July 30, 2006 2:57 PM
To: dx-chat@njdxa.org
Subject: Re: [DX-CHAT] How do we make better DXers?

A few made a good point, it is up to the DX station to control the 
pileup.  I didn't want to go down that path.  But a couple of points 
to keep in mind:

- We (the callers) are the many, they (the DXpedition operators) are 
the few.  They are the ones who have invested the time and money in 
getting there and operating.  We should be responsible enough to 
behave ourselves.  Ease the burden on the few.

- Frustration is caused by the belief that you will not work the DX 
station.  Frustration breeds desperation.  Imagine how much less 
frustration there would be if the out-of-turn callers just kept quiet 
and let the DX operator work someone in the clear.  The rate will 
go up, as will the hope of everyone else in the pileup.  Just because 
WX9QRO calls overtop of everyone, and in frustration and/or 
desperation, the DX operator works him to get him out of the way 
does NOT make it right, and does NOT mean that we have to follow that
example.

73 - Jim AD1C

-- 
Jim Reisert AD1C, 7 Charlemont Court, North Chelmsford, MA 01863
USA +978-251-9933, [EMAIL PROTECTED], http://www.ad1c.us

Subscribe/unsubscribe, feedback, FAQ, problems 
http://njdxa.org/dx-chat

To post a message, DX related items only, dx-chat@njdxa.org

This is the DX-CHAT reflector sponsored by the NJDXA 
http://njdxa.org

Subscribe/unsubscribe, feedback, FAQ, problems 
http://njdxa.org/dx-chat

To post a message, DX related items only, dx-chat@njdxa.org

This is the DX-CHAT reflector sponsored by the NJDXA 
http://njdxa.org



[DX-CHAT] How do we make better DXers?

2006-07-30 Thread Jim Reisert AD1C

It was frustrating and sad to listen to the KH8SI and 4O3T pileups
this weekend (mostly SSB).

When the DX station says, The station with 7 in the call, ending in
Germany why do unrelated calls from all over the country continue to
call?  When the DX station comes back to a full callsign, why does the
pileup size diminish only by half, rather than all but one?  It
makes it impossible for a better DXer to find the station being worked
because so many others are still calling.

The rate of these DX stations is being hindered by out-of-turn
callers.  When the rate is hindered, fewer people can work the DX
station.  Especially limited-time operations like KH8SI.

It made me sad to be a DXer this weekend.  My QSO with KH8SI on 17
meters took THREE go-arounds because they could not get my call
(presumably because of all the people still calling).  That's TWO MORE
possible QSOs that were wasted by the out-of-turn callers.

OUT-OF-TURN CALLERS ARE SETTING A BAD EXAMPLE, RUINING IT FOR
THEMSELVES AND EVERYONE ELSE!

73 - Jim AD1C

--
Jim Reisert AD1C, 7 Charlemont Court, North Chelmsford, MA 01863
USA +978-251-9933, [EMAIL PROTECTED], http://www.ad1c.us
Subscribe/unsubscribe, feedback, FAQ, problems 
http://njdxa.org/dx-chat


To post a message, DX related items only, dx-chat@njdxa.org

This is the DX-CHAT reflector sponsored by the NJDXA 
http://njdxa.org




Re: [DX-CHAT] How do we make better DXers?

2006-07-30 Thread Osten B Magnusson


Jim!

   from all over the country 

Not exactly...  from all over the world  would be more correct. 

This problem started (or should I say got worse) when the 
DX-clusters started to show up on Internet. 


73/DX de Osten SM5DQC

- Original Message - 
From: Jim Reisert AD1C [EMAIL PROTECTED]

To: dx-chat@njdxa.org
Sent: Sunday, July 30, 2006 5:21 PM
Subject: [DX-CHAT] How do we make better DXers?



It was frustrating and sad to listen to the KH8SI and 4O3T pileups
this weekend (mostly SSB).

When the DX station says, The station with 7 in the call, ending in
Germany why do unrelated calls from all over the country continue to
call?  When the DX station comes back to a full callsign, why does the
pileup size diminish only by half, rather than all but one?  It
makes it impossible for a better DXer to find the station being worked
because so many others are still calling.

The rate of these DX stations is being hindered by out-of-turn
callers.  When the rate is hindered, fewer people can work the DX
station.  Especially limited-time operations like KH8SI.

It made me sad to be a DXer this weekend.  My QSO with KH8SI on 17
meters took THREE go-arounds because they could not get my call
(presumably because of all the people still calling).  That's TWO MORE
possible QSOs that were wasted by the out-of-turn callers.

OUT-OF-TURN CALLERS ARE SETTING A BAD EXAMPLE, RUINING IT FOR
THEMSELVES AND EVERYONE ELSE!

73 - Jim AD1C

--
Jim Reisert AD1C, 7 Charlemont Court, North Chelmsford, MA 01863
USA +978-251-9933, [EMAIL PROTECTED], http://www.ad1c.us
Subscribe/unsubscribe, feedback, FAQ, problems 
http://njdxa.org/dx-chat


To post a message, DX related items only, dx-chat@njdxa.org

This is the DX-CHAT reflector sponsored by the NJDXA 
http://njdxa.org
Subscribe/unsubscribe, feedback, FAQ, problems 
http://njdxa.org/dx-chat


To post a message, DX related items only, dx-chat@njdxa.org

This is the DX-CHAT reflector sponsored by the NJDXA 
http://njdxa.org




Re: [DX-CHAT] How do we make better DXers?

2006-07-30 Thread Charlie, W0YG
Maybe they started there with the advent of clusters but it has been going 
on for ages over here.  Some just seem to want to call all the time 
regardless.


73,

Charlie, W0YG..

- Original Message - 
From: Osten B Magnusson [EMAIL PROTECTED]

To: Jim Reisert AD1C [EMAIL PROTECTED]; dx-chat@njdxa.org
Sent: Sunday, July 30, 2006 3:37 PM
Subject: Re: [DX-CHAT] How do we make better DXers?




Jim!

   from all over the country
Not exactly...  from all over the world  would be more correct.
This problem started (or should I say got worse) when the DX-clusters 
started to show up on Internet.

73/DX de Osten SM5DQC

- Original Message - 
From: Jim Reisert AD1C [EMAIL PROTECTED]

To: dx-chat@njdxa.org
Sent: Sunday, July 30, 2006 5:21 PM
Subject: [DX-CHAT] How do we make better DXers?



It was frustrating and sad to listen to the KH8SI and 4O3T pileups
this weekend (mostly SSB).

When the DX station says, The station with 7 in the call, ending in
Germany why do unrelated calls from all over the country continue to
call?  When the DX station comes back to a full callsign, why does the
pileup size diminish only by half, rather than all but one?  It
makes it impossible for a better DXer to find the station being worked
because so many others are still calling.

The rate of these DX stations is being hindered by out-of-turn
callers.  When the rate is hindered, fewer people can work the DX
station.  Especially limited-time operations like KH8SI.

It made me sad to be a DXer this weekend.  My QSO with KH8SI on 17
meters took THREE go-arounds because they could not get my call
(presumably because of all the people still calling).  That's TWO MORE
possible QSOs that were wasted by the out-of-turn callers.

OUT-OF-TURN CALLERS ARE SETTING A BAD EXAMPLE, RUINING IT FOR
THEMSELVES AND EVERYONE ELSE!

73 - Jim AD1C

--
Jim Reisert AD1C, 7 Charlemont Court, North Chelmsford, MA 01863
USA +978-251-9933, [EMAIL PROTECTED], http://www.ad1c.us
Subscribe/unsubscribe, feedback, FAQ, problems http://njdxa.org/dx-chat

To post a message, DX related items only, dx-chat@njdxa.org

This is the DX-CHAT reflector sponsored by the NJDXA http://njdxa.org

Subscribe/unsubscribe, feedback, FAQ, problems http://njdxa.org/dx-chat

To post a message, DX related items only, dx-chat@njdxa.org

This is the DX-CHAT reflector sponsored by the NJDXA http://njdxa.org



Subscribe/unsubscribe, feedback, FAQ, problems 
http://njdxa.org/dx-chat


To post a message, DX related items only, dx-chat@njdxa.org

This is the DX-CHAT reflector sponsored by the NJDXA 
http://njdxa.org




Re: [DX-CHAT] How do we make better DXers?

2006-07-30 Thread Tom Anderson

Jim:

I and the other ops in C9 earlier this month and part of June had the 
same problem, its nothing particular to KH8SI.  If I was calling for say 
USA or by the numbers only, ops in one country especially would keep 
coming back, no matter what I said.  If I asked the offending station if 
they were a say 6 and they were a 1 or if they were in the USA and they 
were in Europe, they just gave me the signal report like they never 
heard me calling by the numbers or anything else.  Often I had to work 
them because they were so strong they would blot out my entire listening 
range of 5-10 khz. up and they wouldn't give up no matter what I said.


One of our ops, NE5EE/C91EE Dave, had a novel reply back to them.  First 
he said he was blacklisting their call in his log, then if they 
persisted he said he was blacklisting their entire COUNTRY and would 
tell everyone who was the offending operator. He actually did it a few 
times, but I'm not sure how effective it was hi hi.  


73 de Tom, WW5L/C91TL

PS:  All C91TL cards received direct so far have been answered..



Jim Reisert AD1C wrote:


It was frustrating and sad to listen to the KH8SI and 4O3T pileups
this weekend (mostly SSB).

When the DX station says, The station with 7 in the call, ending in
Germany why do unrelated calls from all over the country continue to
call?  When the DX station comes back to a full callsign, why does the
pileup size diminish only by half, rather than all but one?  It
makes it impossible for a better DXer to find the station being worked
because so many others are still calling.

The rate of these DX stations is being hindered by out-of-turn
callers.  When the rate is hindered, fewer people can work the DX
station.  Especially limited-time operations like KH8SI.

It made me sad to be a DXer this weekend.  My QSO with KH8SI on 17
meters took THREE go-arounds because they could not get my call
(presumably because of all the people still calling).  That's TWO MORE
possible QSOs that were wasted by the out-of-turn callers.

OUT-OF-TURN CALLERS ARE SETTING A BAD EXAMPLE, RUINING IT FOR
THEMSELVES AND EVERYONE ELSE!

73 - Jim AD1C





Subscribe/unsubscribe, feedback, FAQ, problems 
http://njdxa.org/dx-chat


To post a message, DX related items only, dx-chat@njdxa.org

This is the DX-CHAT reflector sponsored by the NJDXA 
http://njdxa.org




Re: [DX-CHAT] How do we make better DXers?

2006-07-30 Thread WC7N
I will tell you why Jim..  This morning on 30 meters the op would get a 
partial call, say WK7 and would sent that back and then come back to a 
completely different call, like JA1ABC or something like that.  People now 
know that so they just keep calling on top of the other station.  It appears 
to work for a lot of them.  Also yesterday on 20 SSB the KH8 said ok I am 
standing by for Africa on 14215 Africa only, and then he went back to a 
stateside station...


Just not good DX procedure.

Rod WC7N
- Original Message - 
From: Jim Reisert AD1C [EMAIL PROTECTED]

To: dx-chat@njdxa.org
Sent: Sunday, July 30, 2006 8:21 AM
Subject: [DX-CHAT] How do we make better DXers?



It was frustrating and sad to listen to the KH8SI and 4O3T pileups
this weekend (mostly SSB).

When the DX station says, The station with 7 in the call, ending in
Germany why do unrelated calls from all over the country continue to
call?  When the DX station comes back to a full callsign, why does the
pileup size diminish only by half, rather than all but one?  It
makes it impossible for a better DXer to find the station being worked
because so many others are still calling.

The rate of these DX stations is being hindered by out-of-turn
callers.  When the rate is hindered, fewer people can work the DX
station.  Especially limited-time operations like KH8SI.

It made me sad to be a DXer this weekend.  My QSO with KH8SI on 17
meters took THREE go-arounds because they could not get my call
(presumably because of all the people still calling).  That's TWO MORE
possible QSOs that were wasted by the out-of-turn callers.

OUT-OF-TURN CALLERS ARE SETTING A BAD EXAMPLE, RUINING IT FOR
THEMSELVES AND EVERYONE ELSE!

73 - Jim AD1C

--
Jim Reisert AD1C, 7 Charlemont Court, North Chelmsford, MA 01863
USA +978-251-9933, [EMAIL PROTECTED], http://www.ad1c.us
Subscribe/unsubscribe, feedback, FAQ, problems http://njdxa.org/dx-chat

To post a message, DX related items only, dx-chat@njdxa.org

This is the DX-CHAT reflector sponsored by the NJDXA http://njdxa.org

Subscribe/unsubscribe, feedback, FAQ, problems 
http://njdxa.org/dx-chat


To post a message, DX related items only, dx-chat@njdxa.org

This is the DX-CHAT reflector sponsored by the NJDXA 
http://njdxa.org




Re: [DX-CHAT] How do we make better DXers?

2006-07-30 Thread Dan Zimmerman N3OX

The DX just has to be strict about who gets to get through.  The
pileup should be held up until WK7 gets to get through, or the DX says
the whiskey kilo seven please and is met with silence.  Yeah, QSO
rate may plummet, but that's just what has to happen to keep the
pileup in line.

I'm in favor of the DX giving specific instructions to keep the pileup
in line.  I've worked some hard ones on 30m because the DX sent UP
17 instead of just UP and three-quarters of the pile didn't follow.

The  more the DX can reward the good, skilled, and polite DXer with
the contact at the expense of the brute-force jerks, the better the
pileups will get.

Dan
Subscribe/unsubscribe, feedback, FAQ, problems 
http://njdxa.org/dx-chat


To post a message, DX related items only, dx-chat@njdxa.org

This is the DX-CHAT reflector sponsored by the NJDXA 
http://njdxa.org




Re: [DX-CHAT] How do we make better DXers?

2006-07-30 Thread Barry
Perhaps a little extreme, but I believe the only solution is for the DX 
peds to start blacklisting the offenders.  Post them on the 'net and 
when they send for their card, send a little note saying sorry.

73,
Barry

Charlie, W0YG wrote:
Maybe they started there with the advent of clusters but it has been 
going on for ages over here.  Some just seem to want to call all the 
time regardless.


73,

Charlie, W0YG..

- Original Message - From: Osten B Magnusson 
[EMAIL PROTECTED]

To: Jim Reisert AD1C [EMAIL PROTECTED]; dx-chat@njdxa.org
Sent: Sunday, July 30, 2006 3:37 PM
Subject: Re: [DX-CHAT] How do we make better DXers?




Jim!

   from all over the country
Not exactly...  from all over the world  would be more correct.
This problem started (or should I say got worse) when the DX-clusters 
started to show up on Internet.

73/DX de Osten SM5DQC

- Original Message - From: Jim Reisert AD1C 
[EMAIL PROTECTED]

To: dx-chat@njdxa.org
Sent: Sunday, July 30, 2006 5:21 PM
Subject: [DX-CHAT] How do we make better DXers?



It was frustrating and sad to listen to the KH8SI and 4O3T pileups
this weekend (mostly SSB).

When the DX station says, The station with 7 in the call, ending in
Germany why do unrelated calls from all over the country continue to
call?  When the DX station comes back to a full callsign, why does the
pileup size diminish only by half, rather than all but one?  It
makes it impossible for a better DXer to find the station being worked
because so many others are still calling.

The rate of these DX stations is being hindered by out-of-turn
callers.  When the rate is hindered, fewer people can work the DX
station.  Especially limited-time operations like KH8SI.

It made me sad to be a DXer this weekend.  My QSO with KH8SI on 17
meters took THREE go-arounds because they could not get my call
(presumably because of all the people still calling).  That's TWO MORE
possible QSOs that were wasted by the out-of-turn callers.

OUT-OF-TURN CALLERS ARE SETTING A BAD EXAMPLE, RUINING IT FOR
THEMSELVES AND EVERYONE ELSE!

73 - Jim AD1C

--
Jim Reisert AD1C, 7 Charlemont Court, North Chelmsford, MA 01863
USA +978-251-9933, [EMAIL PROTECTED], http://www.ad1c.us
Subscribe/unsubscribe, feedback, FAQ, problems http://njdxa.org/dx-chat

To post a message, DX related items only, dx-chat@njdxa.org

This is the DX-CHAT reflector sponsored by the NJDXA http://njdxa.org

Subscribe/unsubscribe, feedback, FAQ, problems http://njdxa.org/dx-chat

To post a message, DX related items only, dx-chat@njdxa.org

This is the DX-CHAT reflector sponsored by the NJDXA http://njdxa.org



Subscribe/unsubscribe, feedback, FAQ, problems http://njdxa.org/dx-chat

To post a message, DX related items only, dx-chat@njdxa.org

This is the DX-CHAT reflector sponsored by the NJDXA http://njdxa.org




--

Barry Kutner, W2UP 
Newtown, PA 

Subscribe/unsubscribe, feedback, FAQ, problems 
http://njdxa.org/dx-chat


To post a message, DX related items only, dx-chat@njdxa.org

This is the DX-CHAT reflector sponsored by the NJDXA 
http://njdxa.org




Re: [DX-CHAT] How do we make better DXers?

2006-07-30 Thread Dan Zimmerman N3OX

I think long-term blacklisting is too harsh.  I don't think that the
people who are calling out of turn are necessarily doing it because
they're bad people.  I think it's because they know it increases,
rather than decreases their chance of getting through.

I'm OK with short-term blacklisting though.  A quick KQ3XX come back
tomorrow, no contact today is likely fairly effective.  It should
just be for a single band-mode-day though.  It'd give the bad apples
many chances to modify their behavior.


Dan
Subscribe/unsubscribe, feedback, FAQ, problems 
http://njdxa.org/dx-chat


To post a message, DX related items only, dx-chat@njdxa.org

This is the DX-CHAT reflector sponsored by the NJDXA 
http://njdxa.org




Re: [DX-CHAT] How do we make better DXers?

2006-07-30 Thread Charlie, W0YG
I totally agree with what Dan says BUT it just doesn't work that way.  I 
have made plenty of DXpeditions, none to a place I had to stay in a tent in 
100+degree weather or wear a jacket so heavy I could barely move.  When you 
say the CV station only, many guys still call.  OK, you say again, the CV 
only.  Now a few less call but they still are QRMing the QRG.  You say again 
the CV only.  Now a few less call.  Finally you get the station, F2CV or 
N0CV or whoever, but it wasn't because guys quit calling.  It was because a 
few savvy DXers understood you were coming back to one station only and 
finally stood by.  I personally will never leave a call if I get a partial. 
Rate be damned!


I have seen this behavior time after time.  I don't think there is anything 
one can do to get this across to the masses.  As the DX, I just keep at it 
and never vary.  If your call is CV, you are going to get in the log!


Now, that being said, when working a JA pileup, it can be a thing of beauty 
but sometimes this even bites you.  You come back to a weak weak ABJ and 
give a report and you hear ABJ come back, weak as water but hearable because 
the other JA's stood by.  However, to get ABJ to send his call twice or 
three times is like pulling dragon's teeth.  The JA stations are so polite 
that JA9ABJ doesn't want to run the risk of QRMing JA1ABJ.


None of this will stop me from going out again.  Look for me from VK9C in 
October/November this year.


That's how it goes!

73,

Charlie, W0YG..

- Original Message - 
From: Dan Zimmerman N3OX [EMAIL PROTECTED]

To: dx-chat@njdxa.org
Sent: Sunday, July 30, 2006 4:10 PM
Subject: Re: [DX-CHAT] How do we make better DXers?



The DX just has to be strict about who gets to get through.  The
pileup should be held up until WK7 gets to get through, or the DX says
the whiskey kilo seven please and is met with silence.  Yeah, QSO
rate may plummet, but that's just what has to happen to keep the
pileup in line.

I'm in favor of the DX giving specific instructions to keep the pileup
in line.  I've worked some hard ones on 30m because the DX sent UP
17 instead of just UP and three-quarters of the pile didn't follow.

The  more the DX can reward the good, skilled, and polite DXer with
the contact at the expense of the brute-force jerks, the better the
pileups will get.

Dan
Subscribe/unsubscribe, feedback, FAQ, problems http://njdxa.org/dx-chat

To post a message, DX related items only, dx-chat@njdxa.org

This is the DX-CHAT reflector sponsored by the NJDXA http://njdxa.org



Subscribe/unsubscribe, feedback, FAQ, problems 
http://njdxa.org/dx-chat


To post a message, DX related items only, dx-chat@njdxa.org

This is the DX-CHAT reflector sponsored by the NJDXA 
http://njdxa.org




RE: [DX-CHAT] How do we make better DXers?

2006-07-30 Thread Ron Notarius W3WN
Why do they do it?

Two reasons:

(1)  Some don't know better.  They were never shown the ropes, or they've 
learned by observing, and unfortunately, they've observed bad examples.

(2)  It works.  I've been in too many pileups, over the years, where the DX has 
said the Alpha Whiskey or the W N 3 only, several totally unrelated calls 
have come back, and he WORKED them instead of trying for me (or whomever) 
again.  So the learned behavior is to call on any partial call, even unrelated, 
because too many DX will work the loudest signal coming back.

Oh yes, there's a third reason.  It has to do with the inherent nature of 
certain DX hogs themselves, but in order to accurately describe this type, I'd 
have to use language that isn't permitted on this reflector.

73, ron w3wn

-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf
Of Jim Reisert AD1C
Sent: Sunday, July 30, 2006 11:21 AM
To: dx-chat@njdxa.org
Subject: [DX-CHAT] How do we make better DXers?


It was frustrating and sad to listen to the KH8SI and 4O3T pileups
this weekend (mostly SSB).

When the DX station says, The station with 7 in the call, ending in
Germany why do unrelated calls from all over the country continue to
call?  When the DX station comes back to a full callsign, why does the
pileup size diminish only by half, rather than all but one?  It
makes it impossible for a better DXer to find the station being worked
because so many others are still calling.

The rate of these DX stations is being hindered by out-of-turn
callers.  When the rate is hindered, fewer people can work the DX
station.  Especially limited-time operations like KH8SI.

It made me sad to be a DXer this weekend.  My QSO with KH8SI on 17
meters took THREE go-arounds because they could not get my call
(presumably because of all the people still calling).  That's TWO MORE
possible QSOs that were wasted by the out-of-turn callers.

OUT-OF-TURN CALLERS ARE SETTING A BAD EXAMPLE, RUINING IT FOR
THEMSELVES AND EVERYONE ELSE!

73 - Jim AD1C

-- 
Jim Reisert AD1C, 7 Charlemont Court, North Chelmsford, MA 01863
USA +978-251-9933, [EMAIL PROTECTED], http://www.ad1c.us
Subscribe/unsubscribe, feedback, FAQ, problems 
http://njdxa.org/dx-chat

To post a message, DX related items only, dx-chat@njdxa.org

This is the DX-CHAT reflector sponsored by the NJDXA 
http://njdxa.org

Subscribe/unsubscribe, feedback, FAQ, problems
http://njdxa.org/dx-chat

To post a message, DX related items only, dx-chat@njdxa.org

This is the DX-CHAT reflector sponsored by the NJDXA
http://njdxa.org



Re: [DX-CHAT] How do we make better DXers?

2006-07-30 Thread Jerry Keller

If the DX announces he's listening in a range of frequencies, I think in
many instances those who can't find the frequency the DX is listening on
right now simply announce their callsign over and over, listening briefly
in between to see if the DX has heard it.  After all, the DX is supposedly
tuning around in the announced range, so if one cannot tail-end by finding
the station being worked, maybe one can get lucky.  The result is what we
all hear... bedlam. It's still a pile-up; it's just spread out more.
I'm not sufficiently expert to presume to know how to fix this, but it seems
to me that announcing a specific frequency is often better than a range.
Sure everyone will call together, but often DXers will figure out that if
they move off center a bit they stand a better chance of being heard by the
DX.  The DX can then work the edges of the pileup, the upper edge then the
lower edge, switching at intervals as the pileup realizes where he's
listening and flows in that direction.
It's really the same thing on a much narrower scale, but it seems to me
announcing a single listening frequency often works better than announcing a
5 or 10 KHz range.

73, Jerry K3BZ

- Original Message - 
From: Jim Reisert AD1C [EMAIL PROTECTED]

To: dx-chat@njdxa.org
Sent: Sunday, July 30, 2006 11:21 AM
Subject: [DX-CHAT] How do we make better DXers?



It was frustrating and sad to listen to the KH8SI and 4O3T pileups
this weekend (mostly SSB).

When the DX station says, The station with 7 in the call, ending in
Germany why do unrelated calls from all over the country continue to
call?  When the DX station comes back to a full callsign, why does the
pileup size diminish only by half, rather than all but one?  It
makes it impossible for a better DXer to find the station being worked
because so many others are still calling.

The rate of these DX stations is being hindered by out-of-turn
callers.  When the rate is hindered, fewer people can work the DX
station.  Especially limited-time operations like KH8SI.

It made me sad to be a DXer this weekend.  My QSO with KH8SI on 17
meters took THREE go-arounds because they could not get my call
(presumably because of all the people still calling).  That's TWO MORE
possible QSOs that were wasted by the out-of-turn callers.

OUT-OF-TURN CALLERS ARE SETTING A BAD EXAMPLE, RUINING IT FOR
THEMSELVES AND EVERYONE ELSE!

73 - Jim AD1C

--
Jim Reisert AD1C, 7 Charlemont Court, North Chelmsford, MA 01863
USA +978-251-9933, [EMAIL PROTECTED], http://www.ad1c.us
Subscribe/unsubscribe, feedback, FAQ, problems http://njdxa.org/dx-chat

To post a message, DX related items only, dx-chat@njdxa.org

This is the DX-CHAT reflector sponsored by the NJDXA http://njdxa.org



Subscribe/unsubscribe, feedback, FAQ, problems 
http://njdxa.org/dx-chat


To post a message, DX related items only, dx-chat@njdxa.org

This is the DX-CHAT reflector sponsored by the NJDXA 
http://njdxa.org




Re: [DX-CHAT] How do we make better DXers?

2006-07-30 Thread Jim Reisert AD1C
A few made a good point, it is up to the DX station to control the 
pileup.  I didn't want to go down that path.  But a couple of points 
to keep in mind:


- We (the callers) are the many, they (the DXpedition operators) are 
the few.  They are the ones who have invested the time and money in 
getting there and operating.  We should be responsible enough to 
behave ourselves.  Ease the burden on the few.


- Frustration is caused by the belief that you will not work the DX 
station.  Frustration breeds desperation.  Imagine how much less 
frustration there would be if the out-of-turn callers just kept quiet 
and let the DX operator work someone in the clear.  The rate will 
go up, as will the hope of everyone else in the pileup.  Just because 
WX9QRO calls overtop of everyone, and in frustration and/or 
desperation, the DX operator works him to get him out of the way 
does NOT make it right, and does NOT mean that we have to follow that example.


73 - Jim AD1C

--
Jim Reisert AD1C, 7 Charlemont Court, North Chelmsford, MA 01863
USA +978-251-9933, [EMAIL PROTECTED], http://www.ad1c.us

Subscribe/unsubscribe, feedback, FAQ, problems 
http://njdxa.org/dx-chat


To post a message, DX related items only, dx-chat@njdxa.org

This is the DX-CHAT reflector sponsored by the NJDXA 
http://njdxa.org




Re: [DX-CHAT] How do we make better DXers?

2006-07-30 Thread Joe Stepansky

At 12:26 PM 7/30/2006 -0400, Dan Zimmerman N3OX wrote:

I'm OK with short-term blacklisting though.  A quick KQ3XX come back
tomorrow, no contact today is likely fairly effective.


As a KQ3 type, I'm going to assume (with good humor) that wasn't directed 
toward me.  HI!!


But it's not all (or even partially) the DX station's fault.  I listened on 
various frequencies throughout the 20m listening range and was somewhat 
appalled by what I heard.  There was a 5-land station (not picking on 5s, 
it's just I could hear them well) who called no matter who KH8SI came back 
to.  I can understand that sometimes we can overlap with the DX, but this 
seemed to go beyond that.  The NE7 station  WA5 blah-blah...N9QL 
59  WA5 blah-blahWho's the 4PA?  WA5 blah-blah.  And on and on 
and on.


When my turn came up it went like this (1)  The Foxtrot(2) The 
station ending Foxtrot...(3)  The station with Foxtrot...(4)  The Kilo 
Quebec(5)  The Kilo Quebec with Foxtrot...finally (6) OK, I have it 
now, Kilo Quebec Three Foxtrot 59.


Now if he heard the Foxtrot, then he should have been able to hear the rest 
of it on the second or maybe third try.  Why did it take SIX takes until he 
got it?  Obviously, others were transmitting.


73, Joe KQ3F

Subscribe/unsubscribe, feedback, FAQ, problems 
http://njdxa.org/dx-chat


To post a message, DX related items only, dx-chat@njdxa.org

This is the DX-CHAT reflector sponsored by the NJDXA 
http://njdxa.org




Re: [DX-CHAT] How do we make better DXers?

2006-07-30 Thread Peter Dougherty

At 05:56 PM 07/30/2006, Jim Reisert AD1C wrote:
Just because WX9QRO calls overtop of everyone, and in frustration 
and/or desperation, the DX operator works him to get him out of the 
way does NOT make it right, and does NOT mean that we have to 
follow that example.


To that end it would be nice if the big-name operations (and 
operators) all got together and decided that Alpha-Hotels like WX9QRO 
in your example will get a proverbial Lump Of Coal in their QSL 
return envelope (and the donation kept).





Cheers,

Peter,
W2IRT 



Subscribe/unsubscribe, feedback, FAQ, problems 
http://njdxa.org/dx-chat


To post a message, DX related items only, dx-chat@njdxa.org

This is the DX-CHAT reflector sponsored by the NJDXA 
http://njdxa.org




Re: [DX-CHAT] How do we make better DXers?

2006-07-30 Thread Dan Zimmerman N3OX

Joe,

Didn't mean to single out your prefix!  I did a qrz.com search on
KQ3XX just in case ;-)

My favorite (and this happened a bit on 6m today when it was open to
the Carribean) is this, and I'll be the lid this time... that's safe.

DX: 6 Yankee One Victor QRZed?
DX: Kilo Quebec Three Foxt***NOVEMBER THREE OCEAN X-RAY*** and 9 in FK18.
KQ3F (who can luckily hear over me) thanks you're five and 9
DX: Thanks this is Six Yan***NOVEMBER THREE OCEAN X-RAY*** QRZed?

Gotta love it.  I'm working on worked all currently transmitting
stations by the way.  The situation in the big unruly pileups seems
exactly analogous to capital area traffic, by the way.  There are
times around here, if everyone just let one single person in from the
merge lane and just left a little, tiny bit of space for traffic to
move around, the Beltway would move at 60MPH.  Since everyone's being
skittish and selfish and watching out only for themselves, traffic
moves at 23MPH.

The selfishness, of course, is totally misplaced.  The best thing for
the DC metro drivers and the callers trying to break the pileup to do
to get through is calm down and be orderly.  Things will happen much
more smoothly, you'll get your to the end of the commute faster or get
your contact sooner.

Oh well, don't think KH8/S is going to happen for me this time, but I
did work 2 new 6m band-countries today so I've had a good one.

73,
Dan
Subscribe/unsubscribe, feedback, FAQ, problems 
http://njdxa.org/dx-chat


To post a message, DX related items only, dx-chat@njdxa.org

This is the DX-CHAT reflector sponsored by the NJDXA 
http://njdxa.org