Dr OMs,
how can I reverse the ALT+R polarity?
This problem continues since DX4WIN contains the PSK31 module.
I'am using the YAESU FT1000MP MARK-V.
Standard FT1000MP setting for PSK 31 is PKT and LSB.
Not PKT and USB which dx4win needs.
This setting is given by rig possibility to switch narrow
Due to a shortage of serial ports, I use LPT1 to key CW in DX4WIN. This
works fine for CW, but when operating in PSK31 mode, the LPT keyed line does
not seem to operate. I have gone into the PSK Tx preference window and
checked the use CW control - but the LPT CW line does not work from PSK.
(the
Larry, In Ver 6.0x, you have to geo into Preferences and Control and
switch the configuration from CW to PSK31 PTT and back and forth depending
on the mode you are using at the moment. In Ver. 5.02/03 the PTT keying port
was selectable in the PSK31 window. Now its a real pain to switch between
Doesn't work when CW is on the rig control port and PSK31 uses a different
port. May work with LPT poet but not with different serial ports...
-=Rog-K9RB=-
- Original Message -
From: Martin De Craemer [EMAIL PROTECTED]
To: dx4win@mailman.qth.net
Sent: Sunday, October 26, 2003 12:41 PM
Hello Roger
Had the same problem here,they both have to be on the same port but it is
possible to use only cw on DTR or RTS
and cw control enabled in the psk window with 500ms PTT delay to key the
transceeiver.
All you need is a connector on your transceiver that allows CW and PTT on
the same
Been a long weekend. I was in the ADD OFF LINE mode.
Time to go to bed. Sorry for the bandwidth. Cheers, Larry
6 matches
Mail list logo
