I have had the problem at times in the past , every time it has turned out to
be a problem with the internet provider, not the cluster set up or Dx4win. Try
this cluster, it is bullet proof. If you get dropped i would say you have a
problem with your server.
kc5nyo.dns2go.com it's in
-Original Message-
Hi Jim,
Sounds good to me. Looking forward to getting 6.04.
Thanks, Buddy/K4CJB
I use VE7CC software (http://www.bcdxc.org/ve7cc/default.htm) to
connect to the cluster and then interface DX4WIN to it through a
local network. VE7CC will reconnect if you get dropped and DX4WIN
will never know it was disconnected.
Tom AA4VV
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.300 / Virus Database: 265.6.13 - Release Date: 16/01/2005
From [EMAIL PROTECTED] Mon Jan 17 09:47:06 2005
From: [EMAIL PROTECTED] (JerryVan)
Date: Mon Jan 17 09:51:53 2005
Subject: [Dx4win] LoTW export fixed (?) in
Think my text was stripped from the last Email, so here goes again:
Hi Jim,
I was wondering if the problem with group numbers has been fixed?
It was OK in 5.03 and went pear-shaped in 6.02/3.
I use a different group number for each of my old or current calls and
select these to print batches of
There isn't a solution readily available, since this is typically
an ISP inactivity timeout. I've sometimes found that using
a DXcluster node on a different ISP helps.
Opening the packet window and hitting ENTER helps,
or running Tardis with really aggressive time sync settings.
73, Byron
At
It happens when you change or use a selection.
73 de Tom, K4NR
- Original Message -
From: George [EMAIL PROTECTED]
To: dx4win@mailman.qth.net; [EMAIL PROTECTED]
Sent: Monday, January 17, 2005 9:02 AM
Subject: [Dx4win] Re: DX4WIN Ver. 6.04 Beta
I was wondering if the problem with
Paul is very right. VE7CC is one great cluster and it does have
reconnect... That is the only one I use
Rod WC7N
- Original Message -
From: Paul B. Peters, VE7AVV [EMAIL PROTECTED]
To: DX4WIN Reflector dx4win@mailman.qth.net
Sent: Monday, January 17, 2005 6:46 AM
Subject: RE:
Hi all,
Just downloaded this software, VE7CC, it connects up Ok to some nodes but I
cannot get it to connect to VE7CC or VE7CC-1, just says:
1602Z Winsock Error: The attempt to connect timed out: VE7CC-1
any ideas??
73's de Tony G8DQZ
-Original Message-
From: [EMAIL PROTECTED]
Tony... The VE7CC-1 cluster is very new and not included in the existing
cluster list. In the ve7cc program folder, open the cluster.dat file and add
this line: ve7cc-1,dxc.ve7cc.net,7373 . Be sure you follow the syntax or
format of the lines in order to ensure the entry is readable. My
Paul,
Thanks for this info, I am now looking at the cluster.dat file and it shows:
VE7CC,dxc.ve7cc.net,23
VE7CC-1,dxc.ve7cc.net,7373
In other words second line is as you have shown in the text of your reply
below??
Still when I switch on, select this node all I get is
1644Z Winsock Error:
Tony once you downloaded VE7CC to a file, mine is Program Files/VE7CC I
ended up with the following folders; cluster.dat, cty.dat, st6unst.log,
ve7cc2.cfg, ve7cc.cfg and ve7cc.exe
I created a desktop icon for ve7cc.exe.
Then I opened my dx4win folder and opened the folder dx4win.tcp and entered
Paul what does the VE7CC-1 cluster offer that the VE7CC one doesn't ?
Rod WC7N
- Original Message -
From: Paul B. Peters, VE7AVV [EMAIL PROTECTED]
To: 'Tony Lord' [EMAIL PROTECTED]; 'WC7N' [EMAIL PROTECTED];
'DX4WIN Reflector' dx4win@mailman.qth.net
Sent: Monday, January 17, 2005 8:15
Hi All,
I am running two Ar-Clusters, both are open one is filtered for NA. There is
no time out set on the clusters. They are both listed in DX4WIN.
You can use them to find out if your time out proublem is on your end
(ie:settings on your computer or your ISP).
All are welcome to use the
14 matches
Mail list logo
