A new user of DX4Win, W8TE, is trying to get his new CI-V cable [the popular
one from eBay] working properly with the latest rev of DX4Win. His 7800 is
firmware rev v210, and he's running the CI-V setting at 4800 baud with the
transceive setting = off. He has the Contest Mode set for $$ so his
Larry,
Normally his baudrate should be at 9600 baud in the radio setup and dx4win
Tried to simulate this behavior here but don´t have the problem
Mine is connected via the serial port on the back with CI-V for RS-232c
function
CI-V is on, tried also off
Guy ON4AOI
-Oorspronkelijk
Hello Jim, Paul and all the fellows...
Excuse me for this off-topic, but the reflector is smart enough to prevent
sending anything not related with DX4WIN...
Well, this is to wish to all of you a beautiful and merry Christmas, and
all the best in the new year (especially better
Tell him to try turning off Transceive mode in the ICOM (it's
somewhere in one of the radio menus). This mode causes the
transceiver to babble every time the dial is turned. It can cause
problems similar to what he is seeing.
73 - Jim AD1C
On Sun, Dec 21, 2008 at 5:00 AM, Larry Gauthier (K8UT)
The CQ DX Marathon is an annual recognition issued by CQ Magazine. It
is the sum total of the number of different entities, plus the number
of CQ zones, worked in a given year.
This conversion program reads an ADIF log and writes a comma-delimited
spreadsheet that can be copied/pasted into the
5 matches
Mail list logo
