] PSK31 config change in DX4WIN 6.02?
Yes it does... I'm doing it here... Hooked it up to LPT1 pin 1 and 16
just to try it out... Usually use a COM port...
Who says there is a bug?
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
On Behalf Of Larry Gauthier
Sent
PROTECTED]; dx4win@mailman.qth.net
Sent: Monday, March 17, 2003 09:40
Subject: Re: [Dx4win] PSK31 config change in DX4WIN 6.02? A solution!
Mel (et al),
Mel is absolutely correct - DX4WIN v6.02 keys pins 1 and 16 of the LPT
port,
and similarly keys RTS and DTS on a com port. There is no bug
In DX4WIN 5.x, the PSK SettingsTx screen allowed you to select the =
PSK keying com port from 1-8, and either RTS or DTR as the keyed line. =
The 5.x PSK selection was completely independent of the keyed line for =
CW. In DX4WIN 6.02, it seems that your only choices for PSK keying are =
either
=-
- Original Message -
From: Larry Gauthier [EMAIL PROTECTED]
To: dx4win@mailman.qth.net
Sent: Sunday, March 16, 2003 1:41 PM
Subject: [Dx4win] PSK31 config change in DX4WIN 6.02?
In DX4WIN 5.x, the PSK SettingsTx screen allowed you to select the PSK
keying com port from 1-8, and either
Gauthier' [EMAIL PROTECTED]
Cc: 'DX4Win Reflector' dx4win@mailman.qth.net
Sent: Sunday, March 16, 2003 3:24 PM
Subject: RE: [Dx4win] PSK31 config change in DX4WIN 6.02?
Hi Larry... You CAN use the LPT port to key both CW and PSK31/CW PTT...
I would think this would only be a problem if you
16, 2003 4:07 PM
To: [EMAIL PROTECTED]; 'Larry Gauthier'
Cc: 'DX4Win Reflector'
Subject: Re: [Dx4win] PSK31 config change in DX4WIN 6.02?
That doesn't work either, Mel. The PTT relay in the RigBlaster then keys
with every dit and dah or the radio PTT keys with every dit and dah in
the CW mode
PROTECTED]
Cc: 'DX4Win Reflector'
Subject: Re: [Dx4win] PSK31 config change in DX4WIN 6.02?
Mel,
Thanks for the note - and I agree that, theoretically, you should be
able to key the rig from the same port that you use for CW (at least
that's what the config menu says ;-). I am only using 1 rig here, so
) [EMAIL PROTECTED]
To: 'Roger Borowski' [EMAIL PROTECTED]; 'Larry Gauthier' [EMAIL
PROTECTED]
Cc: 'DX4Win Reflector' dx4win@mailman.qth.net
Sent: Sunday, March 16, 2003 8:13 PM
Subject: RE: [Dx4win] PSK31 config change in DX4WIN 6.02?
You haven't got it hooked up correctly...
On the LPT port
8 matches
Mail list logo