Greetings to you all,
When I import an ADIF file from N1MM after a contes, I always get the
frequency in it's field but also rx frequency in the note for this qso
field. Is it possible to remove this note in all QSOs in a simple maner?
Sometimes I work without the computor connected to the rig.
It sounds like N1MM exports both the FREQ and FREQ_RX fields, even when
the QSO is simplex (i.e. the latter is not needed).
You would have to go into the ADIF file, find all the FREQ_RX fields
(both name and value) and completely delete them. May not be so easy.
I'll see if I can add this to
Hello all...
It sounds like N1MM exports both the FREQ and FREQ_RX fields, even when
the QSO is simplex (i.e. the latter is not needed).
You would have to go into the ADIF file, find all the FREQ_RX fields
(both name and value) and completely delete them. May not be so easy.
I use to
On 5/2/2010 9:35 PM, Isidro Acosta Hernández wrote:
I use to change the unwanted fields, adding a _ before them (FREQ_RX...
becomes_FREQ_RX...), so they are not recognized and imported by DX4WIN.
If necessary, I can later restore the correct name.
Muy buena idea!
73 - Jim AD1C
--
Jim
4 matches
Mail list logo