When I was using DX4WIN, I set my old call QSOs as Group 1 (or whatever you
have available). Then my new call was Group 0 default. The QSOs stay in
the same log for tracking purposes. I also used other groups for operating
from work club station, when I went portable 7, etc. Some use groups
The CAT port on the Yaesu does not interface with CW at all (see page 32 of
manual). You need to use another port that can key the CW jack which will
probably not work directly (since USB to COM, WIN 11 timing, etc., will mess
up the CW). You need a WinKeyer, or similar, and then it becomes
I also was a great fan of DX4WIN for many years (version 5.xx or late 4 is
where I started). I even slugged through the long delay to V9 from V8. I
have moved on after a year or so of V9 when no further real updates were
expected. I also would never recommend a newer ham to use DX4WIN since the
Please send me a direct message to me if you are using the DARC outgoing
buro service. I have a simple question since I am looking to replace the
defunct GlobalQSL. I will go back 3 years since I am not sure what got
sent. I am not a big buro QSLer anymore (do not need much) so only send 10
or
Alan,
Of course, you can look on the LoTW website for this QSO and see what VK5DOC
has entered on his certificate. I also suspect you accepted your logged
zone and did not correct with LoTW.
Dan KI6X
-Original Message-
From: dx4win-boun...@mailman.qth.net On
Behalf Of Alan Zack
Sent:
Only can set cutoff between CW and SSB in Preferences for each band. No
digital band range. Dan KI6X
-Original Message-
From: dx4win-boun...@mailman.qth.net On Behalf
Of OZ0J Joe
Sent: Tuesday, June 15, 2021 1:12 PM
To: dx4win@mailman.qth.net
Subject: Re: [Dx4win] alerts
I have not
Just use the "wsjtx_log.adi" and specify don't include duplicates. Then
only the new ones come in quickly. Dan KI6X
-Original Message-
From: dx4win-boun...@mailman.qth.net On
Behalf Of Pat Pat
Sent: Saturday, March 13, 2021 2:48 AM
To: Jim Reisert AD1C ; DaveK
Cc: DX4WIN Reflector
Larry, I did not test. Try:
QSLs
PRINT QSL LABELS
EDIT
Update font there
Dan KI6X
-Original Message-
From: dx4win-boun...@mailman.qth.net On
Behalf Of LARRY MALLEK
Sent: Wednesday, July 8, 2020 3:37 PM
To: dx4win@mailman.qth.net
Subject: [Dx4win] SLASH ZERO IN ADDRESS LABLE
I USE THE
call and then
search your own call for the “station notes”.
73, Dan KI6X
From: Tim moore
Sent: Monday, June 22, 2020 7:00 PM
To: Dan Violette
Cc: DX4WIN Reflector
Subject: Re: [Dx4win] Comments in logbook?
hmmthat's EXACTLY what I do with Notes for this QSO. New antenna
You missed the point.
Tom meant non-QSO related notes (e.g., raised dipole to 60', new TS-990, new
amp, North Korea added to deleted countries, etc.). QSO related notes are easy.
I liked someone's idea about logging yourself and using that for personal
station notes. I actually still have a
As long as it accepts your log it is working and will eventually process.
Very large logs can make it look like it is frozen. Give it 24 hours and
then worry. Most of the time during weekdays it processes smaller uploads
in a couple minutes. Z Monday (after a weekend where the contests are)
Was hoping someone had the right answer before I started speculating.
Not sure, but I think some things are cleaned up deleting (or rename for
now) "config.dat" in SAVE directory.
Worth a try. Might have to reset all your configurations if you have not
saved.
I can rename members.dat to
Kostas said: " I explain that the most important thing in a logging program is
to be reliable (not loose my qsos) and show the right dxcc entity and zone of
every call. Dx4win does perfect these 2 things."
And if it was not for Jim (AD1C) the accuracy would not be there either.
Just an FYI
If you made the QSO in 1998 but it CONFIRMS in LoTW on March 15, 2020 the
March 15, 2020 is the date you will be downloading the confirmation from.
You do not need to go back to 1998 or you will be downloading ALL
CONFIRMATIONS since 1998. Not needed if you already download regularly.
LoTW keeps
I have s second location. I upload to DX4WIN in a different group. Then
when LoTW submittal time, I sort by that group and export to LoTW (keep the
filter). Then I clear the filter and export the rest. Now I have two ADIF
files saves for each location (I add location and date in file name).
They come a slight different color by default. Say default is blue highlight
for "New award Mode" becomes blue text for "Award Mode not confirmed"
See Packet 2 settings.
Might check off in Packet 1 settings "alert unconfirmed country" which I think
then does what you are thinking.
Dan KI6X
#1 - For a specific time period (like a contest), turn on contest mode (QSO -
Contest Mode). Make sure to check off contest mode. I think it now resets
when you exit when it used to stay on until you unchecked. It will then let
you know of dupes and give a serial number. Works nice for
Updater is now built in. Go to HELP - CHECK FOR UPDATES to update
everything you want.
Dan KI6X
-Original Message-
From: dx4win-boun...@mailman.qth.net On
Behalf Of andyphewitt via DX4WIN
Sent: Tuesday, November 26, 2019 8:25 AM
To: Dx4win@Mailman. Qth. Net
Subject: [Dx4win] DX4win
I think mine had updated fine. Can't find a quick way to check version
installed. Tried AH2B and came up as Guam (change in new version). File
date of country.dat is 10/30/2019, the day I did the update (I don't do
often but tried when these comments started).
Dan KI6X
-Original
JTAlert will allow you to specify another file name to export o real time (in
an easier to find location) but still have to manually import. I did that for
a while too but do not use JTAlert much anymore.
Dan KI6X
-Original Message-
From: dx4win-boun...@mailman.qth.net On Behalf
Of
On Windows the WSJT will usually still be in the "Recent" folder when you
import. Then you don't have to remember where it is nor map a drive. You can
always look up the folder in WSJT under Open Log File Location (or something
similar).
Dan KI6X
-Original Message-
From:
F8 works for me before I Export to LOTW. I label my QSOs from work club
with a different group number. Then I F8 to only that group number and
export to LoTW so when I use TSL I select the right location. It does ask
to use filter which I say yes. Then I clear the filter and upload the rest
as
I have never had a problem with the '*' and Excel. I convert VUCC to CSV then
edit to one page for reference and saved to .XLSX. I also do DXCC with an
Excel macro (.XLSM) to format and remove deleted that were not worked. Again,
for a reference paper I take with me.
Dan KI6X
-Original
You need to edit the AWARD boxes at the very bottom. LOTW=Y just says you got
a confirmation via LOTW. The boxes at the bottom specify your award status
(submitted, confirmed) for DXCC, DXCC/CW, WAZ, etc.
Dan KI6X
-Original Message-
From: dx4win-boun...@mailman.qth.net On Behalf
Of
Mine is correct (within 3 minutes). All I can think of is make sure your
lat/long or 6 digit gridsquare is correct. Are you near a time change
border? Fake your gridsquare (lat/long) a little more into the timezone?
Dan KI6X
-Original Message-
From: dx4win-boun...@mailman.qth.net On
You do have to stop the radio in DX4WIN if you run both programs together so
the contest program can use the radio control. I also use N1MM+ then ADIF
export and then import into DX4WIN. No program is going to log into DX4WIN so
you are really just using DX4WIN for the cluster spots telling
I do #2 and create a personal log that I overwrite with new LoTW info for
JT-Alert, Import (ignore duplicates) like the other file. I actually then
have the WSJT-X log file as a backup and my JTAlert as my real one.
Remember you do not need to go before July 1, 2017 for uploads since FT8 did
not
Start Import ADIF file like you normally would.
Import "wsjtx_log.adi" probably in "C:\Users\ki6x_000\AppData\Local\WSJT-X"
with "ki6x_000" actually replaced with your USERNAME on the PC. I know
there is a shortcut that is generic but don't know it off the top of my
head.
When "Option for
And you can add LoTW acceptance also in that check box in the settings. Dan
KI6X
-Original Message-
From: dx4win-boun...@mailman.qth.net On
Behalf Of Jim Reisert AD1C
Sent: Tuesday, May 1, 2018 6:20 AM
To: DX4WIN Reflector
I have been trying to help Juan EA5FID with his problem. I ran out of
ideas. Here are the clues:
* MMTTY transmits and receives OK alone
* MMTTY launches out of DX4WIN OK (executable entered correctly and
launches)
* MMTTY receives OK when launched from DX4WIN
*
Add Step 5 - Import this ADIF once in a while and mark "Ignore Duplicates" and
you will get your new QSOs into your log without typing them in
Dan KI6X
-Original Message-
From: dx4win-boun...@mailman.qth.net On Behalf
Of Leigh
Sent: Friday, April 6,
Juan, Try Jim's APP Note:
http://dx4win.ad1c.us/appnotes/mmtty.html
Dan KI6X
-Original Message-
From: dx4win-boun...@mailman.qth.net On
Behalf Of Juan Del Olmo, EA5FID
Sent: Sunday, March 25, 2018 1:19 AM
To: 'DX4WIN Reflector'
Is there a way to search for RST of 0? I have used that for NIL and DX4WIN
will not let me search for that.
Dan KI6X
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
That's what I was going to basically say. Never will be a LoTW match unless
they go back. You uploaded with the correct info in case they do? As long
as the records match credits you are fine and all you can do. I too have
DXCC submittals from 80's - 90's and all they did was write the call
Not sure of specific problem but want to make sure you understand that Group
000 is ALL CALLS. So, if you select Group 000 all QSOs/QSLs from your log
are selected, no matter the actual call used or group number. Group 000
would select your Groups 000, 001, 002 and any others you create.
Dan
You must have DX4WIN V9 to have the FT8 mode included. Which version do you
have? There is a work around for V8:
Set those QSOs to an unused mode like "TOR" and then update TQSL settings to
convert TOR to FT8 upon upload to LoTW - OR - edit the ADIF from TOR to FT8
before upload. Note if
Desktop or laptop PC? The desktop with a PCI parallel/serial port card works
great. Dan KI6X
-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net] On
Behalf Of John Pritt
Sent: Friday, December 15, 2017 2:04 PM
To: dx4win@mailman.qth.net
You better give all the details:
Each install from the original download (including new license) or did you
do some copy?
Your log is ONLY on the first PC and not on a shared drive somewhere?
Is your old DX4WIN log available to the new program on the new PC?
When you say 20 QSLs, do you mean 20
Which file you wanting to print? In the DOCS subfolder are some PDF files
which are easy to print. One is Version 7 manual (which I printed years ago
and still reference but marked up for V8 some). Also another noted as the
HELP file, I THINK, is the help file for V9 put into a document. I
Doyle - File ends in ".dx4w9", correct? Make sure it is in your DX4W90x folder
(x being another number, probably DX4W901 but maybe the later updates
originally installed create another name matching the version) and not being
saved in an older version folder by mistake.
All - Speaking of
I would try the TS-850 if someone with the radio does not answer you. About
same vintage. Not sure how it would handle 6M+ though auto selections.
Most Kenwoods are almost the same in radio control. Can create a custom RIG
file if something missing. Just start with the closest Kenwood first.
Been a long time since I set this up. I have a "paper size" set in my
PRINTER preferences itself called "QSL Card" (you can call it anything).
Then I choose that from the custom paper. Hopefully this gets you started.
I could do some more research if needed. It is nice putting a pile of my
File - Preferences - Screen -- I have been seeing a lot of people talking
about having 80% in there. 100% should do it. Mine was and stayed at 100%.
Dan KI6X
-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net] On
Behalf Of Bud Governale,
Don't see a reply yet. I am not the best to answer since I let everything
through, but some things I do know:
DX Alerts are the audible notices. This allows you to specify what you want
announced (voice, alarm, etc,)
Ignore Gray/Black I think is the highest level you can go to block.
I do not
Many of use change the mode to "TOR". This leave the 3 characters in the
ADIF, you can have TQSL convert TOR to FT8 upon upload, and when DX4WIN
(version 9 in beta) comes out you can sort by TOR and change to FT8
(assuming you have not used TOR for real - it is not an ADIF mode so should
never
And I am logging FT8 as FAX so that I can do a global find/replace in the
ADIF file before upload. The will not need to be changed since
both have 3 characters. I have not used FAX ever so will do the same in my
log when the next version (or another logging program I change to) has FT8
Filter for JT65 before creating the Report. Dan KI6X
-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf Of Robert Garceau
Sent: Friday, August 11, 2017 1:14 PM
To: dx4win@mailman.qth.net
Subject: [Dx4win] JT65 in report
How do I get
Check the options in the drop down list when you are ready to import. "Issue
Warning and Stop" is not the only choice, only the default. Dan KI6X
-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net] On
Behalf Of Bud Governale, W3LL
Sent:
How did you transfer? If you IMPORTED to 8.05 from an export from another
major version, it would be another format and make sure you select the
correct filetype (.DX4WN8, .DX4WIN6, etc.). I think 6 and 7 are the same.
DX4WIN8 changed the log.
Dan KI6X
-Original Message-
From:
Go to the home webpage listed at the bottom and go to existing members and
edit the choice. Dan KI6X
-Original Message-
From: DX4WIN [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of Dean
Norris
Sent: Tuesday, May 2, 2017 7:28 AM
To: dx4win@mailman.qth.net
Subject: Re: [Dx4win] DX4WIN
Mine match in my records so can't investigate my own. Maybe you worked a
station (more than one or one more than once) that their operation was later
disallowed and the confirmations removed. I do not know how they remove
LoTW QSLs for illegal operations. For paper QSLs they catch it if you try
Try Jim's comparison software.
http://dx4win.ad1c.us/lotw/index.html
Dan, KI6X
-Original Message-
From: DX4WIN [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of PY2YP
Sent: Monday, April 24, 2017 3:40 AM
To: DX4WIN Reflector
Subject: [Dx4win] LOTW issue
If old PC is also 8.05 you can actually copy the whole directory and not even
"install" on new PC. Just put shortcut on new PC. I think the "SAVE"
directory, your license in the root and any other files in the root you do not
have would work. But, I would just copy everything and put
Easier to do in person. Basic ideas: Run in CW part of band first and get
signal on the screen. Should be blue/gray background with yellow signal
(something like that, going by memory don't do too often). Makes sure wide
filter and there is a slider for shooting for 0 when no signal (and +
Bjorn, Tested mine. It does it too. Plays the "asterisk" sound from Windows.
Have not had 2 sound cards long so never really paid attention to it. My theme
plays a quiet "strum" that would hardly be heard over the RTTY and monitor I
usually listen to at the same time. Don't contest with
I have DX4WIN at home and SteppIR at work club so could not answer direct
with that combo. As long as DX4WN is following your radio OK then you "Y"
the SDA-100 from the same serial line and it listens in and sets itself too.
See: http://www.steppir.com/wp-content/uploads/2011/10/Y-Cable.pdf
Dan
I knew Jim had it but did not find in my first pass (even though I have most
of the articles printed and could have looked in my manual notebook).
http://dx4win.ad1c.us/appnotes/dxcc.html
Dan, KI6X
-Original Message-
From: Dan Violette [mailto:dank...@socal.rr.com]
Sent: Tuesday, March
John, Check out:
REPORTS (menu)
DXCC
Under Reports/Actions choose SUBMITTAL
I forget the details off the top of my head and don't want to mess up my log
to test right now. It should just move the "C" to "S". You can filter and
do it on the filtered items if you want. I forget how I normally
Will, Is this preprinted cards and you want to go in a blank spot instead of
sticking on a label (that is what I do)? What printer do you expect to use?
This will all help for replies since everyone is in a different situation
and lots of customizing needed. Dan KI6X
-Original Message-
Good read Bud. I missed the "x" versus "X". Cort, that will do it. DX4WIN
list:
http://www.dx4win.com/HelpVer804/index.html?noteeditfunckeys.htm
Dan, KI6X
-Original Message-
From: DX4WIN [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of Bud Semon
Sent: Sunday, January 17, 2016
Mine saved and is always unchecked. Dan KI6X
-Original Message-
From: DX4WIN [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of w...@att.net
Sent: Tuesday, December 29, 2015 9:50 AM
To: 'Doug Joyce'
Cc: 'dx4win@mailman. qth. net'
Subject: Re: [Dx4win] Wasted label
Tnx for Info, but
Uncheck "Print Method Labels" before printing. Dan
-Original Message-
From: DX4WIN [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of
w...@att.net
Sent: Tuesday, December 29, 2015 9:08 AM
To: dx4win@mailman. qth. net
Subject: [Dx4win] Wasted label
Hi, When I print QSl labels first
If it is marked as Mailed (M) then there is a date it was mailed and then
printing assumes already sent and does not print. Remove the date mailed
when you mark it Y for Label and it should change to Label (L) and show up.
Try one and if works you can search for all "Y" in Label and then under
If you are showing DXCC (default) packet spots then look at REPORTS / AWARDS
and DXCC checked off settings. Dan KI6X
-Original Message-
From: DX4WIN [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of Byron
Peebles
Sent: Sunday, December 6, 2015 3:06 PM
To: dx4win@mailman.qth.net
No problem for me. Used F9 this weekend. Must be a custom redirect for
your PC. Dan KI6X
-Original Message-
From: DX4WIN [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of Rick
Sent: Monday, November 30, 2015 3:52 PM
To: dx4win@mailman.qth.net
Subject: [Dx4win] F9 key on new Windows
was the
issue.
Can be frustrating when you know you are missing something obvious!
Dan KI6X
-Original Message-
From: Dan Violette [mailto:dank...@socal.rr.com]
Sent: Wednesday, November 25, 2015 6:33 PM
To: 'DX4WIN@mailman.qth.net'
Subject: RE: [Dx4win] VUCC Report Blank
Now I realize the VUCC
-
From: n...@comcast.net [mailto:n...@comcast.net]
Sent: Wednesday, November 25, 2015 6:42 PM
To: Dan Violette
Subject: Re: [Dx4win] VUCC Report Blank
Dan
Have you checked the band boxes for VUCC in the SETUP Preferences?
Arne N7KA
-Original Message-----
From: Dan Violette [mailto:dank...@socal.rr.
Now I realize the VUCC field should be blank since I never submitted
anything. Just not getting W/C results in my VUCC Report. Dan KI6X
-Original Message-
From: DX4WIN [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of Dan
Violette
Sent: Wednesday, November 25, 2015 5:12 PM
To: DX4WIN
I have done this every few months for a couple years now and cannot today
after an hour trying. I am trying to get a VUCC report of my grids worked
and confirmed. I then save as CSV and edit in Excel to have paper report.
All VUCC reports are blank (some say "prefix" in the first column where
Are the port numbers high (above 8)? I think there is a limit but may be
mixing up the programs. Dan KI6X
-Original Message-
From: DX4WIN [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of Howard
K2HK
Sent: Monday, November 2, 2015 4:13 PM
To: dx4win dx4
Subject: [Dx4win] FW: HELP
Yes, I was going to say the same thing. Look at Jim's (AD1C) utility ADIF
to DX4WIN. You can assign a group number, add a note, and couple other
nice things. I use to import my contacts from club station to keep separate
from home station QSOs. It originally was only for importing contests but
Well it actually can with the interfaces. http://pignology.net/ Dan, KI6X
From: Radivoj Kar, F6GNZ [mailto:f6...@yahoo.com]
Sent: Wednesday, April 1, 2015 12:26 AM
To: Dan Violette; 'Paul van der Eijk'
Subject: Re: [Dx4win] DX4WIN for Android
Hi Dan,
Thanks for your message, but I also
Lee, I would use just Notepad as a text editor and Find/Replace the section
of say Mode:2CW to say Mode:3JT9 or whatever you are after.
Copy/Paste if only a few to do. Missed what you were after changing. Dan
KI6X
-Original Message-
From: DX4WIN [mailto:dx4win-boun...@mailman.qth.net]
Also, there is a preference to leave it always on top. Dan KI6X
-Original Message-
From: DX4WIN [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of John Shaw
Sent: Wednesday, January 14, 2015 12:45 PM
To: DX4WIN@mailman.qth.net
Subject: Re: [Dx4win] Tuning indicator with MMTTY?
Hi
As Kostas says. I print directly by telling DX4WIN where to print the label
and have an HP paper size profile I choose when I go to print. Can feed
from the front load feeder on an HP Color Laser CP2025. Dan KI6X
-Original Message-
From: DX4WIN [mailto:dx4win-boun...@mailman.qth.net]
And did he install in a folder on the root drive and not inprogram files?
Win 7 and 8 hate updating in that folder without admin rights constantly being
implemented. / Dan KI6X
Sent from my iPad
On Oct 21, 2014, at 5:56 PM, Art - W6KY via DX4WIN dx4win@mailman.qth.net
wrote:
I would
And if you use the updater, create a local.tcp file and those will always
show up at the top of the list. They are included at the top when a new TCP
file is created. Dan, KI6X
-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf Of
Dave,
My LOTW ADIF exports from DX4WIN can list MODE:4RTTY and they are
accepted by LoTW and credited as data just fine. The other modes are
special. I forget which way PSK/PSK31 needs to be. That was an earlier
discussion. Not sure about others, but I have submitted a couple weird
modes
And Jim's adif2dxq program will convert ADIF from really any contest and
allow you to assign a group and notes during the convert. Then DX4WIN does
not need any changes to import with everything you want. Dan KI6X
-Original Message-
From: dx4win-boun...@mailman.qth.net
Version has 60M. Dan/KI6X
-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf Of Glenn Wyant
Sent: Thursday, January 23, 2014 3:33 PM
To: dx4win@mailman.qth.net
Subject: [Dx4win] DX4WIN
My version 6 DX4WIN does not have a slot for
60
I use them both together, on the same audio feed, on another logging
software at our club station. Work fine together on one audio line, each
decoding separately in separate windows, and one being the transmitter. Dan
KI6X
-Original Message-
From: dx4win-boun...@mailman.qth.net
Joe,
Jim AD1C is the manager of that and many other lists (he does all the
callsign overrides for basically all contesting/logging programs). Check
http://ad1c.com for DX4WIN info and the rest he assists with (on his own,
not with author's support but with their concurrence). He got a Ham of
Checkout:
http://dx4win.ad1c.us/appnotes/upgrade.html
/Dan KI6X
-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf Of a...@aol.com
Sent: Thursday, November 07, 2013 8:52 PM
To: dx4win@mailman.qth.net
Subject: [Dx4win] Upgrading with
Checkout:
http://dx4win.ad1c.us/appnotes/lotw.html
/Dan KI6X
-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf Of John Shaw
Sent: Thursday, November 07, 2013 8:17 PM
To: dx4win@mailman.qth.net
Subject: Re: [Dx4win] DXCC QSL
Alan,
I don't think you can. The exact frequency ends up in the notes field if
you added the $$ (so probably cannot be put on a label). There is the
setting in the QSO preference for MHZ instead of Band, but without trying, I
think it will just put 14 MHz instead of 20m and not the exact
I think this is an ICOM software (CI-V?) issue. DXlab does it to an IC756
also at the club station. I have never had it happen with my Kenwood.
Seems to be a command that connects the ICOM radio to the software causes
things to switch to the sub-VFO for a couple seconds and then back. With a
You did make sure you ran the program as Administrator one time to allow
installation? Win 7/8 prevent some things from happening automatically
unless you tell it to. Dan KI6X
-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf Of
Nope, will not. Not a contesting program per the author (other than the
minor ability it has). Cabrillo needs special headers and format for each
contest so would be too much worth anyway. Contest in another program (e.g,
N1MM) and export ADIF from that and import into DX4WIN. You can output
Should not be an issue with dupes anymore. What I have seen people talk
about is when there is a problem, it could think the file when resent is
dupes. Just say send anyway and you are back in sync. Should not need it
marked anymore and then will properly prevent you from sending a file twice
At a minimum it makes the signing and upload as one step (same as just
signing in 1.13). No more going to ARRL site to upload (or email). Dan
KI6X
-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf Of Art - W6KY
Sent: Sunday, June
Also make sure you have 6M checked for showing in Preferences / Station.
Dan KI6X
-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf Of Pat Rose
Sent: Sunday, March 24, 2013 3:37 PM
To: dx4win@mailman.qth.net
Subject: [Dx4win] DX
Also strongly recommend the new Group # for these QSOs. Did that for a
portable operation for me and helps more than once. Dan KI6X
-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf Of Jim Reisert AD1C
Sent: Sunday, March 24, 2013
If you can export to ADIF from LogWindows it is an easy import. Jim (AD1C)
can usually look at the format (from a file or sample file) and write a
converter (if he has not already done one). Give it a day or two and I
would expect he would reply with some good idea. Dan KI6X
-Original
To: Dan Violette
Subject: Re: [Dx4win] DX4win Label printing
Hi Dan,
Thanks for the response, I have a Brother laser printer will try
printing the Avery 5160 labels on it.
Received several messages from other folks all use the Avery or
equivalent labels.
Will take a look
Laser printer on sheets of labels. Though, after all the effort of the last
buro shipment a while back, I moved to GlobalQSL.com /Dan KI6X
-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf Of Doyle
Sent: Friday, March 01, 2013 1:30
Guess the first question is: Are they marked confirmed in DX4WIN for LoTW
(versus just in LoTW)? Dan KI6X
-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf Of Hugh Phillips K7XM
Sent: Tuesday, February 26, 2013 4:25 PM
To:
Groups can be any date since you specify each QSO to a certain group #.
If you want to view (filter) only a certain group # then you go in to:
Filter and Search by group number
OR if you want a selection instead:
Filter
Selection
Under Current Selection if you have already created the other
parts boxes.
73 de Ed, AA9OZ
-Original Message-
From: Dan Violette [dank...@socal.rr.com]
Date: 01/09/2013 09:29 PM
To: 'Ed Douglass' aa...@doorpi.net;, dx4win@mailman.qth.net
Subject: RE: [Dx4win] operating CW from keyboard and keyer without
unplugging
As others said, yes should work. Make
As others said, yes should work. Make sure the small switch on the back of
the TS-850 is on manual keying (not using internal keyer). Since you are
using basically 2 external keyers (on/off keying of the line), either keying
will key the radio.
Dan KI6X
-Original Message-
From:
It shows an upload date which corresponds to when it is processed not first
uploaded despite the wording. I verified this with my last upload actual
date/time versus when new QSL matches hit.. Dan KI6X
-Original Message-
From: dx4win-boun...@mailman.qth.net
1 - 100 of 132 matches
Mail list logo