Re: [Dx4win] New vanity call sign and log in Dx4WIN

[Dan Violette]

When I was using DX4WIN, I set my old call QSOs as Group 1 (or whatever you
have available).  Then my new call was Group 0 default.  The QSOs stay in
the same log for tracking purposes.  I also used other groups for operating
from work club station, when I went portable 7, etc.  Some use groups for
different contests.  Helps with sorting for sure.

Dan KI6X 

-Original Message-
From: dx4win-boun...@mailman.qth.net  On
Behalf Of Lauren Ware via DX4WIN
Sent: Friday, December 15, 2023 6:35 AM
To: dx4win@mailman.qth.net
Subject: [Dx4win] New vanity call sign and log in Dx4WIN

So this morning I got an email from the FCC that my new call sign was
granted. I wondered if I should start a new log in DX4WIN or just change my
call sign in preferences and keep using the same log?
 I know I will need to apply for a new LOTW certificate once the FCC call
sign change winds its way through. 

I am interested in tracking award progress with the combined activity but
not sure what steps I need to take. Thanks for any guidance on this. 

Lauren W4LEW formerly WD4FMG


Sent from my iPhone
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Computer keying of Yaesu FT-857D

[Dan Violette]

The CAT port on the Yaesu does not interface with CW at all (see page 32 of
manual).  You need to use another port that can key the CW jack which will
probably not work directly (since USB to COM, WIN 11 timing, etc., will mess
up the CW).  You need a WinKeyer, or similar, and then it becomes another
COM port (connected to your USB) and sends the CW itself internally so
Windows is not involved and keys the CW port of the radio fine.

Dan KI6X

-Original Message-
From: dx4win-boun...@mailman.qth.net  On
Behalf Of Joe
Sent: Friday, May 19, 2023 5:18 PM
To: DX4WIN@mailman.qth.net
Subject: [Dx4win] Computer keying of Yaesu FT-857D

I'm trying to hook up a Yaesu FT-857D to a new Windows 11 laptop.  (Haven't
used the Yaesu before.)  I'm using the Yaesu CT-62 CAT cable to an Edgeport
USB to RS232 unit and into a USB port on the computer.  COM 5 is the
appropriate port, and the Radio type is "Yaesu FT-857 modified by G4IRN."
I can get DX4WIN 8.05 to correctly show the frequency on the band map, move
the frequency when I rotate the radio dial and jump to spots when I click on
them in the band map.

But I can't get it to send CW via the computer.  I have COM 5 selected in
the CW setup tab, the Device type is DX4WIN, DTR is CW keying and RTS is
None.  If I key the radio with a straight key it works fine, but the
computer does nothing.

I also have the same situation with N1MM Logger+.  I can get the frequency
data to work, but can't key the radio with the computer.

Any suggestions would be welcome.

Tnx es 73, Joe, K1JB

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] any upgrades?

[Dan Violette]

I also was a great fan of DX4WIN for many years (version 5.xx or late 4 is
where I started).  I even slugged through the long delay to V9 from V8.  I
have moved on after a year or so of V9 when no further real updates were
expected.  I also would never recommend a newer ham to use DX4WIN since the
items that most would find almost necessary these days are LoTW integration
(upload/download confirmations within the program), and notification of
award needs in the WSJT window.  Keeping LoTW in sync with one button and
seeing color coded FT8 needs in WSJT receive window sure is nice.

Dan KI6X

-Original Message-
From: dx4win-boun...@mailman.qth.net  On
Behalf Of Bruce Blackley via DX4WIN
Sent: Thursday, March 30, 2023 9:29 AM
To: John K9EL 
Cc: dx4win@mailman.qth.net
Subject: Re: [Dx4win] any upgrades?

Subject: Re: [Dx4win] any upgrades? 

 Hi John,you hit the nail on the head. I am 78 years old and I have been
using Dx4Win ever since version 6.XX. The last thing I need is a big
learning curve with a program that may not be as good as Dx4Win when I
finally figure it out. With a little work you will find out that Dx4Win will
do more things than you can imagine. I wouldn't give up Dx4Win if someone
paid me. 

When ever a new ham joins our radio club I suggest Dx4Win for their logging.
They are all happy because is is very easy to get started using it. As time
goes on one can add more and more knowledge of the use of the many features.

73 

Bruce WD4LBR 

---Original Message--- 

 

From: John, K9EL 

Date: 3/29/2023 7:35:26 PM 

To: 'Courtney Judd'; 'Dx4win' 

Subject: Re: [Dx4win] any upgrades? 

 

I believe most DX4Win users who also operate FT8 would like full 

integration. Most likely that would require adding UDP communication and 

Paul says that is not likely to happen, at least not anytime soon. 

 

Fortunately, it is not difficult to add FT8 QSOs to DX4Win. I create a 

shortcut to the WSJT-X (or JTDX) .adi file. I import that file and it 

imports very quickly. Not ideal, but very easy. 

 

If you need a logging program with real time uploads to Club Log, LOTW, full


integration with other software and other fun things, DX Labs software may 

be your choice. But the learning curve is steep and the number of settings 

and options is significant. DX4Win is very straight forward and so easy to 

use. I want to focus on making QSOs, not spending tons of time on the 

logging program. 

 

Just my 2 cents 

 

K9EL 

 

 

 

-Original Message- 

From: dx4win-boun...@mailman.qth.net  On 

Behalf Of Courtney Judd 

Sent: Wednesday, March 29, 2023 6:15 PM 

To: dx4win@mailman.qth.net 

Subject: [Dx4win] any upgrades? 

 

I am just sorta on the fence here now since I finally have made the jump to 

FT8 and just wondering if DX4WIN is going to be upgraded to handle WSJT-X 

like it does with MMTTY. I have been using DX4WIN for many years and now 

have 160K+ q's in the log. There are several minor changes I would like to 

see but integration of WSJT-X is one that I would like to see. So while I 

have been looking at all the windows logging programs now available I don't 

really want to move away from DX4WIN if something is in the pipeline. If 

nothing coming then I guess I'll be looking at other options. Thanks for 

reading 73's Cort K4WI 

 

Sent from Postbox  

__ 

DX4WIN mailing list 

Home: http://mailman.qth.net/mailman/listinfo/dx4win 

Help: http://mailman.qth.net/mmfaq.htm 

Post: mailto:DX4WIN@mailman.qth.net 

 

This list hosted by: http://www.qsl.net 

Please help support this email list: http://www.qsl.net/donate.html 

 

__ 

DX4WIN mailing list 

Home: http://mailman.qth.net/mailman/listinfo/dx4win 

Help: http://mailman.qth.net/mmfaq.htm 

Post: mailto:DX4WIN@mailman.qth.net 

 

This list hosted by: http://www.qsl.net 

Please help support this email list: http://www.qsl.net/donate.html

--
This email has been checked for viruses by AVG antivirus software.
www.avg.com
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Dx4win] Anyone Using DARC Outgoing Buro

[Dan Violette]

Please send me a direct message to me if you are using the DARC outgoing
buro service.  I have a simple question since I am looking to replace the
defunct GlobalQSL.  I will go back 3 years since I am not sure what got
sent.  I am not a big buro QSLer anymore (do not need much) so only send 10
or so a year.  I have asked DARC my question in their request form.  Has
been over a week and no response yet.

 

Dan KI6X

k...@arrl.net  

 

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] VK5 DX Zones

[Dan Violette]

Alan,

Of course, you can look on the LoTW website for this QSO and see what VK5DOC
has entered on his certificate.  I also suspect you accepted your logged
zone and did not correct with LoTW.

Dan KI6X

-Original Message-
From: dx4win-boun...@mailman.qth.net  On
Behalf Of Alan Zack
Sent: Sunday, June 12, 2022 10:28 PM
To: 'WA7AA' ; dx4win@mailman.qth.net
Subject: Re: [Dx4win] VK5 DX Zones

Yes, the LOTW entry shows Z29 in the confirmation. I don't remember now but
am guessing after downloading the confirmation ADIF file from and entering
it into my DX4WIN file either it automatically changed it to Z29 to match
his info or I was directed to do so when I ran the search for IMPORT to find
differences between what I had logged and what LOTW had in its records.
Usually the only differences are in GRID numbers. Anyway, mystery solved,
not a problem with my country file.
Thanks for pointing me in the right direction.
73 

Alan Zack
Amateur Radio Station K7ACZ

-Original Message-
From: dx4win-boun...@mailman.qth.net On Behalf Of WA7AA
Sent: Sunday, June 12, 2022 06:54 PM
To: dx4win@mailman.qth.net
Subject: Re: [Dx4win] VK5 DX Zones

On 11-Jun-22 19:55, Alan Zack wrote:
> How does DX4WIN determine DX Zones? By the country list? I have the 
> latest country list in my DX4WIN I just received my 2021 DX Marathon

> UBN results back and I got dinged for entering VK5DOC for Z29. The 
> VK5DOC qrz.com page does not show what zone he is in. When I logged 
> him in my DX4WIN log it was entered as Z29, not Z30. The QSO is 
> confirmed with LoTW. It shows him in Z29, not Z30.
>   
> When I asked John K9EL, the contest manager, why I was dinged for a 
> wrong entry for Z29 here was his reply:
> I also use DX4Win and if I enter VK5DOC, it says Zone 30.
> I have never heard that any VK5 stations can be in Zone 29.  I have 
> been doing this contest since 2008.
>   
> John may very well be right but why would my version of DX4WIN show
> Z29 and his show Z30? I only have one entry for VK5DOC on
07/03/2021.
> In my log for Z29 I have many VK6, VK8, and VK9 stations but only
one 
> VK5, the VK5DOC shows as Z29.
>   

Entering VK5DOC over here correctly assumes zone 30. If your log has him as
29, it's possible that you created an exception in the database by
overriding 30 with 29. He may have given you a wrong number - he wouldn't be
the first one. The other possibility is that he incorrectly set up his TQSL
station information with a wrong zone and you overrode the default zone in
the log by accepting the LOTW value.
LOTW works on the GIGO system - virtually no station info verification
exists.

Hope this helps.

WA7AA


__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] alerts

[Dan Violette]

Only can set cutoff between CW and SSB in Preferences for each band.  No 
digital band range.  Dan KI6X

-Original Message-
From: dx4win-boun...@mailman.qth.net  On Behalf 
Of OZ0J Joe
Sent: Tuesday, June 15, 2021 1:12 PM
To: dx4win@mailman.qth.net
Subject: Re: [Dx4win] alerts

I have not found the solution in version 9. I guess that the spot on 50313 
(EY8MM) is shown SSB? And the spot will be shown SSB, because the spotter has 
not put in FT8 in the note field. 

If the problem should be solved, I guess that there must be a band plan for 
e.g. DIGI including FT4, FT8 etc. build into DX4WIN. I am not sure whatever 
that is possible. 


73 Joe, OZ0J
https://english.oz0j.dk 

-Oprindelig meddelelse-
Fra: dx4win-boun...@mailman.qth.net  På vegne 
af RCSEG
Sendt: 14. juni 2021 12:06
Til: dx4win@mailman.qth.net
Emne: Re: [Dx4win] alerts

Anybody can help ?

Le 12/06/2021 à 14:12, RCSEG a écrit :
> In continuation of this mail below, one example EY8MM already worked 
> and confirmed on FT8 on 6m CW cut of frequency on 6 is 50100 Spot for 
> EY8MM on 50313 shows needed, but it is already confirmed .
> So how to solve ?
> 73
> Pierre
>
> Le 12/06/2021 à 13:09, RCSEG a écrit :
>> Good day
>> The DX spot window has only 2 modes , CW on one side, all other modes 
>> on the other side.
>> This is also the case by CW cut of frequency.
>> How can we select colours to make difference between CW digi modes 
>> and SSB?
>>
>> 73
>> Pierre
>>
>
>

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] RE : Import FT8 LOG FILE INTO DX4WIN.... NOT WORK

[Dan Violette]

Just use the "wsjtx_log.adi" and specify don't include duplicates.  Then
only the new ones come in quickly.  Dan KI6X

-Original Message-
From: dx4win-boun...@mailman.qth.net  On
Behalf Of Pat Pat
Sent: Saturday, March 13, 2021 2:48 AM
To: Jim Reisert AD1C ; DaveK 
Cc: DX4WIN Reflector 
Subject: [Dx4win] RE : Import FT8 LOG FILE INTO DX4WIN NOT WORK

Hellooo everybody,

Just verify this thing :

Create your wsjt_log from WSJT-X software.

Open the file you have created and you will see this :

WSJT-X ADIF Export

You just have to make a correction to , you must write  :

WSJT-X ADIF Export

And then it will work well, because i am also using DX4WIN and WSJT-X 2.2
and that work fine like that.

Best 73 from Belgium.

Pat ON5SV



De : Jim Reisert AD1C
Envoyé le :samedi 13 mars 2021 01:15
À : DaveK
Cc : DX4WIN Reflector
Objet :Re: [Dx4win] Import FT8 LOG FILE INTO DX4WIN NOT WORK

Also see:

http://mailman.qth.net/pipermail/dx4win/2018-January/023807.html

--
Jim Reisert AD1C, , https://www.ad1c.us
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] SLASH ZERO IN ADDRESS LABLE

[Dan Violette]

Larry, I did not test.  Try:

QSLs
PRINT QSL LABELS
EDIT
Update font there

Dan KI6X

-Original Message-
From: dx4win-boun...@mailman.qth.net  On
Behalf Of LARRY MALLEK
Sent: Wednesday, July 8, 2020 3:37 PM
To: dx4win@mailman.qth.net
Subject: [Dx4win] SLASH ZERO IN ADDRESS LABLE

I USE THE ANDALE MONO FONT IN DX4WIN AND SLASH ZERO EVEN ON CHECKS I WRITE.
HOW DO I GET DX4WIN TO PRINT USING ANDALE MONO ON THE ADDRESS LABEL WHEN
DOING QSLING.

--
Larry A. Mallek, K6YUI
lmal...@roadrunner.com
1st K6/W6 TO MAKE HONOR ROLL ON RTTY. (2012) Skype name larry-k6yui
President So Calif DX Club 2010

U.S.A.F. 1960-1966
  

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Comments in logbook?

[Dan Violette]

Yep, there are a few ways someone could do it.  I just think it would be hard 
to find the notes when they are inside random QSO records.  In a paper log I 
would add it to the middle of the row with blanks top/bottom.  Then a quick 
scan through the logs finds the notes.  I can see using personal call and then 
search your own call for the “station notes”.

 

73,  Dan KI6X

 

From: Tim moore  
Sent: Monday, June 22, 2020 7:00 PM
To: Dan Violette 
Cc: DX4WIN Reflector 
Subject: Re: [Dx4win] Comments in logbook?

 

hmmthat's EXACTLY what I do with Notes for this QSO. New antenna.make a 
note there...when I make my first contact with that new antenna. New 
micmake a note on the QSO(s) with the new mic. Country deleted.make a 
note there (on that country that I just worked that got deleted...), etc, etc. 
So I guess I'm still missing the point, as you say. No problem though, it works 
just fine for me.so I don't have any issues. Hope others figure out 
something that works for them. It works perfectly to make "non-QSO" related 
notes as isfor me. I guess I'll consider myself lucky!

 

K4TK


 

  
<https://docs.google.com/uc?export=download=1HoWeYGw7VOx7iewxuoqNRRcHT_4FLLRp=0B7PmBh_D1C4AZ1dEeW43QmlicGN6YTZBZ3FSeFpIRU94Z0g4PQ>
 
<https://docs.google.com/uc?export=download=1b-Nm7oqcgna1gSGfpU6n-GMcT6vxFIJw=0B7PmBh_D1C4AWFBhOW5sVkF6YnhYejR6MFRhUmRXUm1IaXdrPQ>
 

 

Tim Moore

PMP

 

 

On Mon, Jun 22, 2020 at 7:54 PM Dan Violette mailto:dank...@socal.rr.com> > wrote:

You missed the point.

Tom meant non-QSO related notes (e.g., raised dipole to 60', new TS-990, new 
amp, North Korea added to deleted countries, etc.).  QSO related notes are easy.

I liked someone's idea about logging yourself and using that for personal 
station notes.  I actually still have a paper log handy where all it is used 
for now is station notes.  I should just use a notebook and can then file a lot 
of stuff in there with the notes.  I have heard that recommended before but 
have not implemented (is it too late?).

Dan KI6X

-Original Message-
From: dx4win-boun...@mailman.qth.net <mailto:dx4win-boun...@mailman.qth.net>  
mailto:dx4win-boun...@mailman.qth.net> > On 
Behalf Of Tim moore
Sent: Saturday, June 20, 2020 6:59 PM
To: Tom Doligalski mailto:w...@mac.com> >
Cc: DX4WIN Reflector mailto:DX4WIN@mailman.qth.net> >
Subject: Re: [Dx4win] Comments in logbook?

I might be missing your pointbut there aere already two fields in the QSO 
window for each QSO made. Notes for this QSO and Notes for this Call (if I 
remember correctly, I don't have the program loaded on this computer). So are 
you talking about some other kind of comments? I use them frequently. When I 
work someone with the same radio as me, I'll put a comment in the QSO in one of 
those fields. When I get a new radio, I add comments like "first 6 meter 
contact on new FT991A"or "he's using same microphone as me"and on and 
on, etc, etc.

So are you talking about something different? Because there are already TWO 
comment fields as the software already is. So I'm a bit confused what you are 
asking foris it something different

K4TK



Tim Moore
PMP


On Fri, Jun 19, 2020 at 3:26 PM Tom Doligalski via DX4WIN < 
dx4win@mailman.qth.net <mailto:dx4win@mailman.qth.net> > wrote:

> Years ago, in the dark ages before we had electronics logs, it was 
> very convenient to write a comment in the logbook. Something like “new dipole”
> or “new radio”.
>
> I would like to suggest a similar function for dx4win. Maybe have the 
> program recognize and entry made with the callsign field starting with 
> the #sign as a comment. No entries for qsl, etc. but just day, time, 
> notes for this qso. Maybe the current frequency and mode.
>
> Items would appear chronologically in the log, but nowhere else.
>
> Not sure how difficult this would be, but it would be very useful, 
> albeit only used occasionally.
>
> 73, Tom W4KX
>
> Sent from my iPad
> __
> DX4WIN mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:DX4WIN@mailman.qth.net <mailto:DX4WIN@mailman.qth.net> 
>
> This list hosted by: http://www.qsl.net Please help support this email 
> list: http://www.qsl.net/donate.html
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net <mailto:DX4WIN@mailman.qth.net> 

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/m

Re: [Dx4win] Comments in logbook?

[Dan Violette]

You missed the point.

Tom meant non-QSO related notes (e.g., raised dipole to 60', new TS-990, new 
amp, North Korea added to deleted countries, etc.).  QSO related notes are easy.

I liked someone's idea about logging yourself and using that for personal 
station notes.  I actually still have a paper log handy where all it is used 
for now is station notes.  I should just use a notebook and can then file a lot 
of stuff in there with the notes.  I have heard that recommended before but 
have not implemented (is it too late?).

Dan KI6X

-Original Message-
From: dx4win-boun...@mailman.qth.net  On Behalf 
Of Tim moore
Sent: Saturday, June 20, 2020 6:59 PM
To: Tom Doligalski 
Cc: DX4WIN Reflector 
Subject: Re: [Dx4win] Comments in logbook?

I might be missing your pointbut there aere already two fields in the QSO 
window for each QSO made. Notes for this QSO and Notes for this Call (if I 
remember correctly, I don't have the program loaded on this computer). So are 
you talking about some other kind of comments? I use them frequently. When I 
work someone with the same radio as me, I'll put a comment in the QSO in one of 
those fields. When I get a new radio, I add comments like "first 6 meter 
contact on new FT991A"or "he's using same microphone as me"and on and 
on, etc, etc.

So are you talking about something different? Because there are already TWO 
comment fields as the software already is. So I'm a bit confused what you are 
asking foris it something different

K4TK



Tim Moore
PMP


On Fri, Jun 19, 2020 at 3:26 PM Tom Doligalski via DX4WIN < 
dx4win@mailman.qth.net> wrote:

> Years ago, in the dark ages before we had electronics logs, it was 
> very convenient to write a comment in the logbook. Something like “new dipole”
> or “new radio”.
>
> I would like to suggest a similar function for dx4win. Maybe have the 
> program recognize and entry made with the callsign field starting with 
> the #sign as a comment. No entries for qsl, etc. but just day, time, 
> notes for this qso. Maybe the current frequency and mode.
>
> Items would appear chronologically in the log, but nowhere else.
>
> Not sure how difficult this would be, but it would be very useful, 
> albeit only used occasionally.
>
> 73, Tom W4KX
>
> Sent from my iPad
> __
> DX4WIN mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:DX4WIN@mailman.qth.net
>
> This list hosted by: http://www.qsl.net Please help support this email 
> list: http://www.qsl.net/donate.html
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] LoTW

[Dan Violette]

As long as it accepts your log it is working and will eventually process.
Very large logs can make it look like it is frozen.  Give it 24 hours and
then worry.  Most of the time during weekdays it processes smaller uploads
in a couple minutes.  Z Monday (after a weekend where the contests are)
it will slow down.  DXPedition uploads really slow it down.  It was not too
many years ago when 24 hours was expected.  We sure have gotten used to
immediate gratification!

Dan KI6X

-Original Message-
From: dx4win-boun...@mailman.qth.net  On
Behalf Of Paul F6EXV
Sent: Sunday, April 26, 2020 7:04 AM
To: DX4WIN Refelector 
Subject: [Dx4win] LoTW

Hi all
Anybody knows what the problem is with LoTW ?
It gets stuck very often, and no log at all is uploaded for hours. This has
been going on for weeks, if not months.
Are they planning to solve the problem ?

73
Paul F6EXV
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] DX4WIN Will Not Start

[Dan Violette]

Was hoping someone had the right answer before I started speculating.  

Not sure, but I think some things are cleaned up deleting (or rename for
now) "config.dat" in SAVE directory.

Worth a try.  Might have to reset all your configurations if you have not
saved.

I can rename members.dat to .datx and DX4WIN still launches so something
else.

Dan KI6X

-Original Message-
From: dx4win-boun...@mailman.qth.net  On
Behalf Of Bud Governale
Sent: Tuesday, April 7, 2020 5:43 PM
To: WA7AA 
Cc: Bud Governale ; DX4WIN Reflector 
Subject: Re: [Dx4win] DX4WIN Will Not Start

Hi Zoran,

I used your members.dat file.
It did not fix the problem.
DX4WIN still fails to start with access denied to members.dat.

Unsettling to have DX4WIN dead in the water.

Still need help from anyone.

73,

Bud W3LL

On Tue, Apr 7, 2020 at 8:26 PM WA7AA  wrote:

> On 07-Apr-20 17:19, Bud Governale wrote:
> > Hi Zoran,
> >
> > The problem has not been resolved.
> > DX4WIN still will mot start.
> > Any help will be much appreciated.
> >
> > 73,
> >
> > Bud W3LL
> >
>
> I would imagine you already restarted the PC without change *and* you 
> don't have a backup of your files, so I'm sending you the members.dat 
> file. Copy it into the c:\dx4094\save folder (first delete or override 
> the old file when prompted) and see if that fixes it. If ARRL.net 
> doesn't allow attachments, let me know - there are other ways of 
> getting it.
>
>
>
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Auto Upload to LOTW, etc.

[Dan Violette]

Kostas said:  " I explain that the most important thing in a logging program is 
to be reliable (not loose my qsos) and show the right dxcc entity and zone of 
every call. Dx4win does perfect these 2 things."

And if it was not for Jim (AD1C) the accuracy would not be there either.  

Just an FYI from earlier discussion:  I use DXLabs at the club station and we 
send in our LoTW uploads in bulk but just two clicks to send (one to add 
requested QSOs, one to send).  Then downloads are one click to download log 
match (that QSOs are matched in both places) and one more to update 
confirmations.  Last click can be done whenever you want to check for more 
confirmations.  I also think every QSO uploaded real time is a waste of LoTW 
computer resources but they are so fast normally now that is not really an 
issue.

Dan KI6X

-Original Message-
From: dx4win-boun...@mailman.qth.net  On Behalf 
Of Kostas SV1DPI
Sent: Monday, April 6, 2020 1:23 AM
To: dx4win@mailman.qth.net
Subject: Re: [Dx4win] Auto Upload to LOTW, etc.

It is normal that the most of the users still use dx4win are not interested for 
auto upload to lotw, clublog and eqsl. After some time I believe the majority 
of the dx4win users will be like me: they will not have interest for ft8 as 
well.

Dx4win should be able to offer these 2 things. Of course switchable auto or 
not. But this is what most of the people ask today. I have showed dx4win to 
many new hams. I explain that the most important thing in a logging program is 
to be reliable (not loose my qsos) and show the right dxcc entity and zone of 
every call. Dx4win does perfect these 2 things. 
I am a CQ checker in my country. You can not believe how many mistakes other 
programs have in zones. But all the new hams are interesting for
ft8 and other digi and they don't like the way dx4win handles this. Also they 
want to be able easily upload to lotw and clublog. In combination that they 
need to pay for dx4win (not a few $) the most of them go away. 
This is not good for most of us even we are ok with dx4win...

73 Kostas SV1DPI


__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] LoTW import

[Dan Violette]

If you made the QSO in 1998 but it CONFIRMS in LoTW on March 15, 2020 the
March 15, 2020 is the date you will be downloading the confirmation from.
You do not need to go back to 1998 or you will be downloading ALL
CONFIRMATIONS since 1998.  Not needed if you already download regularly.
LoTW keeps track of last download date.

Dan

-Original Message-
From: dx4win-boun...@mailman.qth.net  On
Behalf Of Mike Cizek W0VTT
Sent: Friday, April 3, 2020 5:48 AM
To: 'Luc' ; 'REFLECTOR dx4win' 
Subject: Re: [Dx4win] LoTW import

Hello Luc,

Those are the correct steps.  LoTW keeps track of when you made your last
download and when new QSLs arrive.  You do not need to put a date in when
you download your reports.

--
73,
Mike Cizek W0VTT 

-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf Of Luc
Sent: Friday, April 03, 2020 05:38
To: REFLECTOR dx4win
Subject: [Dx4win] LoTW import

Hi, I have a doubt.
I have imported all my log to DX4WIN from the ARRL's Logbook on the World
page.
1) Your QSO
2) Download report (I put the date where my radio activity started)
3) Your Call sign (any)
4) Download report (save it as Lotwreport.adi)
5) Then I go to DX4WIN in the LoTW menu, Import from LoTW and import the
file Lotwreport.adi into DX4WIN.

I think those are the correct steps.

My question is: Every time I import that file, should I do it completely?
Imagine that a QSO arrives confirming an entity that I made in 1998, should
I import from before that date?

Greetings to all and wishing this pandemic to pass as soon as possible.

73 de EA8AM

--
Si reenvía este correo, es OBLIGACIÓN LEGAL según la "Agencia Española de
Protección de Datos de Carácter Personal" proteger la intimidad de sus
contactos, para ello y para evitar SPAM (correo no deseado) hay que seguir
los siguientes pasos:

1.- Borre la dirección del remitente y cualquier otra dirección que aparezca
en el cuerpo del mensaje.

2.- Introduzca los destinatarios en el apartado CCO (CON COPIA OCULTA)

Recuerde:

Para: Déjelo en blanco.

Ccc: Déjelo en blanco.

Cco: Incluya aquí a sus destinatarios.

Coloque esta nota en sus mensajes.

GRACIAS POR COLABORAR.
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Portable grids?

[Dan Violette]

I have s second location.  I upload to DX4WIN in a different group.  Then
when LoTW submittal time, I sort by that group and export to LoTW (keep the
filter).  Then I clear the filter and export the rest.  Now I have two ADIF
files saves for each location (I add location and date in file name).  Then
when I run TQSL, I choose the file and station location associated.  Then
the county, state, grid, etc. get uploaded to match.  Actually for me
everything the same except grid but with some 6M and FT8 etc. it matters.

Dan KI6X

-Original Message-
From: dx4win-boun...@mailman.qth.net  On
Behalf Of Jim Rhodes
Sent: Friday, January 17, 2020 7:32 AM
To: dx4win@mailman.qth.net
Subject: [Dx4win] Portable grids?

How does one deal with periods of operation when in another grid? I travel
for work and will set up a portable operation and work some FT4/8 but I
don't see how to track this in my main log. I don't want to work people from
North Dakota and submit to LOTW showing that I was in Nebraska.

--
Jim K0XU
j...@rhodesend.net
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] New Country Question

[Dan Violette]

They come a slight different color by default.  Say default is blue highlight 
for "New award Mode" becomes blue text for "Award Mode not confirmed"

See Packet 2 settings.

Might check off in Packet 1 settings "alert unconfirmed country" which I think 
then does what you are thinking.

Dan KI6X

-Original Message-
From: dx4win-boun...@mailman.qth.net  On Behalf 
Of Rich
Sent: Thursday, December 26, 2019 12:59 PM
To: dx4win@mailman.qth.net
Subject: [Dx4win] New Country Question

I hope this is clearer than mud!

Does the DX4WIN DX Spots consider a COUNTRY a NEW ONE until it is CONFIRMED or 
WORKED?

Example:

I have no contacts with Mexico.  I make my first QSO with Mexico, but it is not 
confirmed.

Will the DX4win DX Spot window, continue to consider any spots with Mexico as a 
new Country?

In my case they appear in yellow.

Thanks

Rich

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Ideas for development

[Dan Violette]

#1 - For a specific time period (like a contest), turn on contest mode (QSO - 
Contest Mode).  Make sure to check off contest mode.  I think it now resets 
when you exit when it used to stay on until you unchecked.  It will then let 
you know of dupes and give a serial number.  Works nice for casual contest 
efforts.

#2 and #3 have been talked about here but I would not expect to see and have 
not seen a possibility list of future updates.

Dan KI6X

-Original Message-
From: dx4win-boun...@mailman.qth.net  On Behalf 
Of Paul GRANGER
Sent: Wednesday, November 27, 2019 8:49 AM
To: REFLECTOR dx4win 
Subject: Re: [Dx4win] Ideas for development

I did not see much reaction to this...

Le 25/11/2019 à 10:06, F6EXV a écrit :
> Hi all
> Ideas for development :
> 1/ Be "warned" when a QSO is a dupe
> For example, when we import a contest log, we work the same stations 
> over and over again. It wouod be nice to get a warning, or a message 
> being copied automatically into the "Notes for this QSO" for example, 
> that this is a dupe.
> This dupe info should also be notified for a standard QSO, being input 
> the normal way.
>
> 2/ Link the FT8 programs, so a QSO entered there is automatically 
> transfered to DX4Win, without going through the import procedure.
>
> 3/ Allow automatic upload to Clublog, which MANY of us are using.
>
> If many users support these developments, maybe they will be taken 
> care of...
> Thanks
> Paul F6EXV

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] DX4win updater

[Dan Violette]

Updater is now built in.  Go to HELP - CHECK FOR UPDATES to update
everything you want.

Dan KI6X

-Original Message-
From: dx4win-boun...@mailman.qth.net  On
Behalf Of andyphewitt via DX4WIN
Sent: Tuesday, November 26, 2019 8:25 AM
To: Dx4win@Mailman. Qth. Net 
Subject: [Dx4win] DX4win updater

HI I need some advice please. I am in the process of loading up a new W10
Laptop. The predecessor had DX4Win 8.05 loaded with the data updater. I have
loaded DX4Win 9.03  and my key. That is working OK but I am not sure if I
need to download a newer UPDATER or whether I can copy over the one I used
for DX4W 8.05?

In any case I suppose it would be best to download afresh he updater, the
question is where is it hiding?

73

Andy

G3SVD

 

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] DX4WIN Updates

[Dan Violette]

I think mine had updated fine.  Can't find a quick way to check version
installed.  Tried AH2B and came up as Guam (change in new version).  File
date of country.dat is 10/30/2019, the day I did the update (I don't do
often but tried when these comments started).

Dan KI6X

-Original Message-
From: dx4win-boun...@mailman.qth.net  On
Behalf Of Mack WA4HKX
Sent: Saturday, November 2, 2019 5:40 PM
To: Brian Bird ; dx4win@mailman.qth.net
Subject: Re: [Dx4win] DX4WIN Updates

Same here Brian. I saw Jim's email pertaining to the new country file but
have yet to see it in the update list when selecting Help for Updates. As of
today, it has yet to appear.
73's
Mack WA4HKX


Get Outlook for iOS 
From: dx4win-boun...@mailman.qth.net  on
behalf of Brian Bird via DX4WIN 
Sent: Friday, November 1, 2019 9:54:10 PM
To: dx4win@mailman.qth.net 
Subject: [Dx4win] DX4WIN Updates

I believe I've seen a couple of comments on this the past month or so but
have never really seen an answer to my knowledge.

I'm running version 9.0.7.1230 on a windows 10 computer.

The past month or so when trying to update the data bases in DX4WIN I run
into an issue,  I click on help/check for updates. The DX4WIN Update Status
box appears and is blank under the files tab. I click on OK below and it
comes back and says "No Updates were Installed". I'm just not seeing any
updates. I know there has been two updates as I've seen the email from Jim
saying so. I thought I just read another user having this same issue last
week and Paul said the last update went out October 16.

Any ideas of why I am not seeing the updates now? Everything else appears to
work normally in the program.

Thank you,
Brian - NX0X
Sent from my iPad
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Fwd: WSJT to DX4WIN

[Dan Violette]

JTAlert will allow you to specify another file name to export o real time (in 
an easier to find location) but still have to manually import.  I did that for 
a while too but do not use JTAlert much anymore.

Dan KI6X

-Original Message-
From: dx4win-boun...@mailman.qth.net  On Behalf 
Of Irwin Darack
Sent: Tuesday, October 15, 2019 12:57 PM
To: n...@vci.net
Cc: dx4win list 
Subject: Re: [Dx4win] Fwd: WSJT to DX4WIN

Possibly this can be done in JTAlert. This program will transfer FT8 QSO's to 
Ham Radio Deluxe and other logging programs.

Thanks, Irwin KD3TB

On Tue, Oct 15, 2019 at 3:34 PM  wrote:

> Hello Raymundo,
>
> Unfortunately, there is not an easy way to import your logged QSOs 
> from WSJT-X into DX4WIN.  We have asked Paul to consider adding UDP 
> broadcast support to DX4WIN, so that once a QSO is logged within 
> WSJT-X it would also automatically be logged in DX4WIN.  But Paul has 
> not responded to this request -- even though most other logging programs 
> already support UDP.
>
> So now all you can do is manually import the logfile from WSJT-X into 
> DX4WIN.  This is not as easy as it sounds because the WSJT-X logfile 
> is hidden in an obscure folder within Windows.  I have shortened the 
> search process by mapping a drive in Windows to the folder within 
> WSJT-X so that I can find the file faster.  But it is still not ideal.  We 
> need UDP support.
>
> To manually import the log file from WSJT-X, go to File in DX4WIN, 
> then Import/Export, make sure ADIF is the file type selected, in the 
> smaller window select File again, Import and then go find the logfile for 
> WSJT-X.
> Select the logfile and either double click or click on Open.  You will 
> see a new window for "Options for duplicate QSOs", and make sure "that 
> Imported QSO is ignored" is the one appearing in the drop down menu.  
> You want DX4WIN to ignore all duplicates as it imports the log from 
> WSJT-X.  Click OK and you are done.
>
> I have over 6,500 FT8 QSOs and 1,300 FT4 QSOs in my log and they all 
> have been imported that way.  The manual import of the logfile is very 
> time consuming and laborious, and can be a real problem when you are 
> in the middle of a big opening on 6 meters into EU.  DX4WIN is an 
> excellent logging problem except for this one glaring weakness.
>
> Now all you can do is manually import the WSJT-X logfile over and over 
> and over...
>
> I hope this helps.
>
> 73,
>
> Dave, N4QS
>
>
>
> -Original Message-
> From: dx4win-boun...@mailman.qth.net  
> On Behalf Of Raymundo Rodriguez
> Sent: Tuesday, October 15, 2019 2:08 PM
> To: dx4win list 
> Subject: [Dx4win] Fwd: WSJT to DX4WIN
>
> Dear friends, I have my DX4WIN updated and I am starting to operate 
> FT8 with Joe Taylor's WSJT software but I need to incorporate my WSJT 
> log contacts to my permanent DX4WIN Log so I would appreciate if 
> possible provide me with the instructions I must follow to achieve  
> Incorporate them, I will be highly grateful for your support in completing 
> this task.
> Sincerely Ray / YS1RR
>
> Raymundo Rodríguez - YS1RR
> Ingeniero Industrial, mba
>
> Enviado desde mi iPad Air 2
>
> Inicio del mensaje reenviado:
>
> > De: Raymundo Rodriguez 
> > Fecha: 15 de octubre de 2019, 1:05:32 p. m. CST
> > Para: dx4win list 
> > Asunto: WSJT to DX4WIN
> >
> > 
> >  Dear friends, I have my DX4WIN updated and I am starting to 
> > operate
> FT8 with Joe Taylor's WSJT software but I need to incorporate my WSJT 
> log contacts to my permanent DX4WIN Log so I would appreciate if 
> possible provide me with the instructions I must follow to achieve  
> Incorporate them, I will be highly grateful for your support in completing 
> this task.
> >
> > Sincerely
> >
> > Ray / YS1RR
> >
> > Raymundo Rodríguez - YS1RR
> > Ingeniero Industrial, mba
> >
> > Enviado desde mi iPad Air 2
> __
> DX4WIN mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:DX4WIN@mailman.qth.net
>
> This list hosted by: http://www.qsl.net Please help support this email 
> list: http://www.qsl.net/donate.html
>
> __
> DX4WIN mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:DX4WIN@mailman.qth.net
>
> This list hosted by: http://www.qsl.net Please help support this email 
> list: http://www.qsl.net/donate.html



--
Irwin KD3TB
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: 

Re: [Dx4win] Fwd: WSJT to DX4WIN

[Dan Violette]

On Windows the WSJT will usually still be in the "Recent" folder when you 
import.  Then you don't have to remember where it is nor map a drive.  You can 
always look up the folder in WSJT under Open Log File Location (or something 
similar).

Dan KI6X

-Original Message-
From: dx4win-boun...@mailman.qth.net  On Behalf 
Of n...@vci.net
Sent: Tuesday, October 15, 2019 12:34 PM
To: 'Raymundo Rodriguez' ; 'dx4win list' 

Subject: Re: [Dx4win] Fwd: WSJT to DX4WIN

Hello Raymundo,

Unfortunately, there is not an easy way to import your logged QSOs from WSJT-X 
into DX4WIN.  We have asked Paul to consider adding UDP broadcast support to 
DX4WIN, so that once a QSO is logged within WSJT-X it would also automatically 
be logged in DX4WIN.  But Paul has not responded to this request -- even though 
most other logging programs already support UDP.

So now all you can do is manually import the logfile from WSJT-X into DX4WIN.  
This is not as easy as it sounds because the WSJT-X logfile is hidden in an 
obscure folder within Windows.  I have shortened the search process by mapping 
a drive in Windows to the folder within WSJT-X so that I can find the file 
faster.  But it is still not ideal.  We need UDP support.

To manually import the log file from WSJT-X, go to File in DX4WIN, then 
Import/Export, make sure ADIF is the file type selected, in the smaller window 
select File again, Import and then go find the logfile for WSJT-X.  Select the 
logfile and either double click or click on Open.  You will see a new window 
for "Options for duplicate QSOs", and make sure "that Imported QSO is ignored" 
is the one appearing in the drop down menu.  You want DX4WIN to ignore all 
duplicates as it imports the log from WSJT-X.  Click OK and you are done.

I have over 6,500 FT8 QSOs and 1,300 FT4 QSOs in my log and they all have been 
imported that way.  The manual import of the logfile is very time consuming and 
laborious, and can be a real problem when you are in the middle of a big 
opening on 6 meters into EU.  DX4WIN is an excellent logging problem except for 
this one glaring weakness.

Now all you can do is manually import the WSJT-X logfile over and over and 
over...

I hope this helps.

73,

Dave, N4QS



-Original Message-
From: dx4win-boun...@mailman.qth.net  On Behalf 
Of Raymundo Rodriguez
Sent: Tuesday, October 15, 2019 2:08 PM
To: dx4win list 
Subject: [Dx4win] Fwd: WSJT to DX4WIN

Dear friends, I have my DX4WIN updated and I am starting to operate FT8 with 
Joe Taylor's WSJT software but I need to incorporate my WSJT log contacts to my 
permanent DX4WIN Log so I would appreciate if possible provide me with the 
instructions I must follow to achieve  Incorporate them, I will be highly 
grateful for your support in completing this task.  Sincerely Ray / YS1RR

Raymundo Rodríguez - YS1RR 
Ingeniero Industrial, mba

Enviado desde mi iPad Air 2

Inicio del mensaje reenviado:

> De: Raymundo Rodriguez 
> Fecha: 15 de octubre de 2019, 1:05:32 p. m. CST
> Para: dx4win list 
> Asunto: WSJT to DX4WIN
> 
> 
>  Dear friends, I have my DX4WIN updated and I am starting to operate FT8 
> with Joe Taylor's WSJT software but I need to incorporate my WSJT log 
> contacts to my permanent DX4WIN Log so I would appreciate if possible provide 
> me with the instructions I must follow to achieve  Incorporate them, I will 
> be highly grateful for your support in completing this task.  
> 
> Sincerely 
> 
> Ray / YS1RR
> 
> Raymundo Rodríguez - YS1RR 
> Ingeniero Industrial, mba
> 
> Enviado desde mi iPad Air 2
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] upload to LoTW problem from DX4WIN

[Dan Violette]

F8 works for me before I Export to LOTW.  I label my QSOs from work club
with a different group number.  Then I F8 to only that group number and
export to LoTW so when I use TSL I select the right location.  It does ask
to use filter which I say yes.  Then I clear the filter and upload the rest
as my home location for TQSL home location.

Out of time tonight to test with one QSO.  I would assume the one QSO has
LOTW Upload flag set to Y.

Dan KI6X

-Original Message-
From: dx4win-boun...@mailman.qth.net  On
Behalf Of Chris Sauvageot
Sent: Monday, August 26, 2019 4:08 AM
To: dx4win@mailman.qth.net
Subject: Re: [Dx4win] upload to LoTW problem from DX4WIN

F8 and Export to LoTW has no relation!

Export to Lotw means: check all QSO and select where is LotW field set to Y

Only this QSOs will exported in a file for the upload

73 Chris
DL5NAM

Am 26.08.2019 um 13:03 schrieb sp...@pzk.pl:
> Serch QSO for export ( F8)
>
> next.
>
> 2.Menu LoTW
>
> 3.Export to LoTW
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Log export as .csv file (for spreadsheet analysis)

[Dan Violette]

I have never had a problem with the '*' and Excel.  I convert VUCC to CSV then 
edit to one page for reference and saved to .XLSX.  I also do DXCC with an 
Excel macro (.XLSM) to format and remove deleted that were not worked.  Again, 
for a reference paper I take with me.

Dan KI6X

-Original Message-
From: dx4win-boun...@mailman.qth.net  On Behalf 
Of Randy Farmer
Sent: Thursday, August 22, 2019 6:30 AM
To: dx4win@mailman.qth.net
Subject: Re: [Dx4win] Log export as .csv file (for spreadsheet analysis)

Be aware if you are exporting a DX4WIN report as a csv file into Excel:

DX4WIN uses an asterisk (*) to denote credited entities in a report. 
This character is a special reserved character in Excel, and attempting to use 
the raw csv export file from a DX4WIN report will therefore give some weird 
results. I'm always forced to first run the csv file through Notepad or Wordpad 
and do a search and replace on all the * characters. 
This has been a problem with the program forever, and I sure wish it could be 
fixed.

73...
Randy, W8FN

On 8/22/2019 5:16 AM, David Gould wrote:
> Hi Cesar,
>
> Thanks for that,  it has solved my problem.
>
> 73,
>
> Dave  G3UEG
>
>
> On 22/08/2019 11:08, PY2YP wrote:
>> Hi Dave
>>
>> Right click on the logbook window then choose save file.
>>
>> 73 DX de PY2YP - Cesar
>>
>> On 22/08/2019 07:01, David Gould wrote:
>>> I was surprised not to find a .csv file export option.
>>>
>>> Can anyone suggest a way to get the log data into a spreadsheet. I 
>>> want to sort the data on various columns.
>>>
>>> 73,
>>>
>>> Dave  G3UEG
> __
> DX4WIN mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:DX4WIN@mailman.qth.net
>
> This list hosted by: http://www.qsl.net Please help support this email 
> list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Not Recognizing LOTW Confirmation

[Dan Violette]

You need to edit the AWARD boxes at the very bottom.  LOTW=Y just says you got 
a confirmation via LOTW.  The boxes at the bottom specify your award status 
(submitted, confirmed) for DXCC, DXCC/CW, WAZ, etc.

Dan KI6X

-Original Message-
From: dx4win-boun...@mailman.qth.net  On Behalf 
Of Bud Governale
Sent: Friday, April 26, 2019 9:05 AM
To: Mike Cizek W0VTT 
Cc: Bud Governale ; DX4WIN Reflector 
Subject: Re: [Dx4win] Not Recognizing LOTW Confirmation

Hi Mike,

The first thing I did in DX4WIN was to change each one individually to S.
Then in ARRL LOTW I confirmed and paid.
Today ARRL LOTW confirmed them.
I went into DX4WIN Reports and changed Submitted to Confirmed for Mixed, Band 
and Mode.
Then I made Bothe the LOTW and DX4WIN files and saved them.
Then I started AD1C LOTW DX4WIN program.
Pointed DX4WIN and LOTW each to their file locations.
Then ran ADIC.
Surprised to see the AD1C report with the 8 mismatches.
Looked in DX4WIN DXCC reports and surprised to see M for each.
Next went into each of the 8 contacts and at the bottom changed LOTW to Y.
Updated the DX4WIN file that AD1C looks at and ran it.
Still 8 mismatches.

The 8 contacts in DX4WIN still do show a C in the DXCC Reports window.
Each individual  8 contacts still do show a Y in the confirm box.

No Joy.

73,

Bud W3LL



On Fri, Apr 26, 2019 at 11:46 AM Mike Cizek W0VTT  wrote:

> Hello Bud,
>
> Since there are only 8 of them, it's probably easiest to do them 
> manually by changing the flags at the bottom of the QSO window.  For 
> future reference, when you want to do a submission, do it in DX4WIN:
> Reports > DXCC (or whatever award); check Band Mode and/or Mixed, as 
> appropriate; Select LoTW.
>
> This will change all of your new LoTW confirmations to "S" for submitted.
>
> When ARRL processes the submission go back to the Reports menu:
> Reports > Award Flags > Action > Submitted ->Checked This will change 
> all the "S" to "*" for Checked.
> You may need to do this more than once if you are submitting for both 
> the Challenge and any single mode endorsements.
>
> --
> 73,
> Mike Cizek WØVTT
>
> -Original Message-
> From: dx4win-boun...@mailman.qth.net [mailto:
> dx4win-boun...@mailman.qth.net]
> On Behalf Of Bud Governale
> Sent: Friday, April 26, 2019 09:38
> To: DX4WIN Reflector
> Subject: [Dx4win] Not Recognizing LOTW Confirmation
>
> I completed an ARRL LOTW submittal.
> It was completed by ARRL LOTW.
> I updated DX4WIN for the 8 confirmations by downloading the ARRL LOTW 
> report into my created LOTW file folder.
> Next I confirmed "LOTW Using ADIF file" using the downloaded ARRL LOTW 
> report in my LOTW folder.
> Just as I have always done.
>
> In Reports DXCC Listing those 8 LOTW confirmations show as "C" and not "*".
> Putting a "Y" in the LOTW box for each of the individual contacts does 
> change the "C" to "*".
>
> AD1C Compare shows these 8 contacts as mismatches.
> The AD1C report has LOTW: [*]  DX4WIN: [C].
>
> I don't know how to change (C) to (*) in the DX4WIN report.
>
> How do I do this?
>
> 73,
>
> Bud W3LL
> w...@arrl.net
> __
> DX4WIN mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:DX4WIN@mailman.qth.net
>
> This list hosted by: http://www.qsl.net Please help support this email 
> list: http://www.qsl.net/donate.html
>
>
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Sunrise and Sunset time

[Dan Violette]

Mine is correct (within 3 minutes).  All I can think of is make sure your
lat/long or 6 digit gridsquare is correct.  Are you near a time change
border?  Fake your gridsquare (lat/long) a little more into the timezone?

Dan KI6X

-Original Message-
From: dx4win-boun...@mailman.qth.net  On
Behalf Of Arthur Caswell
Sent: Saturday, March 16, 2019 4:01 PM
To: dx4win@mailman.qth.net
Subject: [Dx4win] Sunrise and Sunset time

Hi
 
I am running the latest version of DX4WIN and my sunrise and sunset times
are off by -1 hour, I have had this problem since before the time change.
Tried changing the time zone of the computer to see if that changed any
thing, no luck.  Looked in online help, the manual and different all the
window drop downs.  In earlier versions there was a place to change time or
zones.  Please help.
 
Thanks
73
Skip KE9L


---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Contest log program

[Dan Violette]

You do have to stop the radio in DX4WIN if you run both programs together so 
the contest program can use the radio control.  I also use N1MM+ then ADIF 
export and then import into DX4WIN.  No program is going to log into DX4WIN so 
you are really just using DX4WIN for the cluster spots telling you what you 
need special (but can't click to move radio to freq in DX4WIN).

Dan KI6X

-Original Message-
From: dx4win-boun...@mailman.qth.net  On Behalf 
Of Jay Chamberlain
Sent: Monday, February 18, 2019 3:03 PM
To: Mark Endorf 
Cc: DX4WIN@mailman.qth.net
Subject: Re: [Dx4win] Contest log program

I haven’t had any success running  two logging programs at the same time with 
my IC-7300 because the USB control fight.

NS4Jay


On Mon, Feb 18, 2019 at 3:40 PM Mark Endorf  wrote:

> A good contest program to use is N1MM.
> All of the contest programs are capable of generating an ADIF file 
> which you then can import into DX4WIN.
> 73
> WA0MHJ
>
> -Original Message-
> From: dx4win-boun...@mailman.qth.net [mailto:
> dx4win-boun...@mailman.qth.net]
> On Behalf Of Scott Millick
> Sent: Monday, February 18, 2019 2:30 PM
> To: DX4WIN@mailman.qth.net
> Subject: [Dx4win] Contest log program
>
> What is a good contest program to use with dx4win
>
> Sent from my iPhone
>
> __
> DX4WIN mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:DX4WIN@mailman.qth.net
>
> This list hosted by: http://www.qsl.net Please help support this email 
> list: http://www.qsl.net/donate.html
>
> __
> DX4WIN mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:DX4WIN@mailman.qth.net
>
> This list hosted by: http://www.qsl.net Please help support this email 
> list: http://www.qsl.net/donate.html
>
--
NS4Jay
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] JTAlert and DX4WIN

[Dan Violette]

I do #2 and create a personal log that I overwrite with new LoTW info for
JT-Alert,  Import (ignore duplicates) like the other file.  I actually then
have the WSJT-X log file as a backup and my JTAlert as my real one.
Remember you do not need to go before July 1, 2017 for uploads since FT8 did
not exist (go back another month if you were testing early).

Dan KI6X

-Original Message-
From: dx4win-boun...@mailman.qth.net  On
Behalf Of Paul Ferguson
Sent: Saturday, June 2, 2018 8:57 AM
To: dx4win@mailman.qth.net
Subject: [Dx4win] JTAlert and DX4WIN

I am interested in running JTAlert with DX4WIN. A question was asked last
year about this, and Joe Subich, W4TV, posted the following:

-
> Re: [Dx4win] WSJT-X
> Joe Subich, W4TV Sun, 22 Oct 2017 07:25:16 -0700
> 
> JTAlert is logging already direct with : DXLab- HRD - Log4OM - AClog, 
> with this new updating of DX4Win WSJT-X is a MUST In order for JTAlert 
> to log directly to D4Win, you will need to convince Laurie, VK3AMA to 
> add that capability.  To do so, he requires two things
> - a documented API for inserting a QSO into the log and API for 
> reading the log database (to confirm the QSO has been logged, to scan 
> the log for "QSO B4" and to scan the log to update the JTAlert "Need"
list).
> 
> The best way to accomplish this is for the developer to contact Laurie 
> directly and work out the details between themselves.
> 
> 73,
> 
>... Joe, W4TV
--

I have two questions:

1. Does DX4WIN developer, KK4HD, have any plans to provide support for this?

2. Are any DX4WIN users currently using JTAlert by exporting a copy of the
DX4WIN log into a format supported by JTAlert, and importing it back into
DX4WIN. If so, please describe your procedure and experiences. 

73,
Paul
K5ESW



__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to dank...@socal.rr.com

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to arch...@mail-archive.com

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] log question

[Dan Violette]

Start Import ADIF file like you normally would.

Import "wsjtx_log.adi" probably in "C:\Users\ki6x_000\AppData\Local\WSJT-X"
with "ki6x_000" actually replaced with your USERNAME on the PC.  I know
there is a shortcut that is generic but don't know it off the top of my
head.

When "Option for duplicates" pops up make sure it is "Imported QSO is
ignored" so you don't get the previously imported ones again.

There was discussion on this which has better explanation:

http://mailman.qth.net/pipermail/dx4win/2018-April/thread.html

See "Importing WSJT-X ADI..." thread.  Not the best information and can't
find the other messages quickly.

Might be some from March also (or earlier):
http://mailman.qth.net/pipermail/dx4win/

Dan KI6X

-Original Message-
From: dx4win-boun...@mailman.qth.net  On
Behalf Of w8gc
Sent: Saturday, May 19, 2018 1:39 PM
To: dx4win 
Subject: [Dx4win] log question

Any help on how to configure WSJT-X to log my QSOs to dx4win v 9.0.4.1176?

73, Bob, w8gc
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to dank...@socal.rr.com

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to arch...@mail-archive.com

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Check your WAZ award flags!

[Dan Violette]

And you can add LoTW acceptance also in that check box in the settings.  Dan
KI6X

-Original Message-
From: dx4win-boun...@mailman.qth.net  On
Behalf Of Jim Reisert AD1C
Sent: Tuesday, May 1, 2018 6:20 AM
To: DX4WIN Reflector 
Subject: [Dx4win] Check your WAZ award flags!

This morning, I discovered the many (most) modes were *not* enabled for the
CQ WAZ award in DX4WIN.  This may have been something specific to my DX4WIN
configuration.

Go to File | Awards, then click on the WAZ tab at the top.  The box in the
lower left lists "Valid modes".  I believe all can/should be checked.

The reason I noticed this is that I was not getting "Worked" credit for an
FT8 QSO made with Zone 24.

Also see:
http://www.cq-amateur-radio.com/cq_awards/cq_waz_awards/cq_waz_award_types.h
tml

73 - Jim AD1C

--
Jim Reisert AD1C, , http://www.ad1c.us
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to dank...@socal.rr.com

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to arch...@mail-archive.com

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Dx4win] MMTTY with DX4WIN will not TX (for EA5FID)

[Dan Violette]

I have been trying to help Juan EA5FID with his problem.  I ran out of
ideas.  Here are the clues:

 

*   MMTTY transmits and receives OK alone
*   MMTTY launches out of DX4WIN OK (executable entered correctly and
launches)
*   MMTTY receives OK when launched from DX4WIN
*   Problem:  Does not transmit when launched out of DX4WIN

*   Using: TX / PTT & FSK / Port EXTFSK in MMTTY 
*   Using ICOM radio commands for Rx/Tx (Icom CI-V)

 

If you can help Juan that would be appreciated.  I am not using Icom.  I can
send an email train with pictures of his settings directly if needed.

 

/Dan KI6X

 

 

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to arch...@mail-archive.com

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Interface JT-Alert with DX4WIN?

[Dan Violette]

Add Step 5 - Import this ADIF once in a while and mark "Ignore Duplicates" and 
you will get your new QSOs into your log without typing them in

Dan KI6X

-Original Message-
From: dx4win-boun...@mailman.qth.net  On Behalf 
Of Leigh
Sent: Friday, April 6, 2018 9:56 AM
To: 'David Kozinn, K2DBK' ; 'Dennis Petrich' 
; 'John, K9EL' ; 'William Liporace' 
; 'Dx4win@Mailman. Qth. Net' 
Subject: Re: [Dx4win] Interface JT-Alert with DX4WIN?

It is very simple to do.  

1. Simply create an up to date ADI file of your entire log using DX4WIN.

2. Under logging in JTAlert, point to this file as your log file.

3. In JTAlert, use scan log and rebuild

4. Specify mode as FT8 for example, and all your DXCC countries worked and 
needed will be updated for that mode.

New worked stations will be automatically added to the ADI file you created in 
step 1.  As always, create a back up copy of your log in case something gets 
hosed up.

Worked great for me.  Good luck.

Mike
K7PI

-Original Message-
From: dx4win-boun...@mailman.qth.net  On Behalf 
Of David Kozinn, K2DBK
Sent: Friday, April 6, 2018 09:33
To: 'Dennis Petrich' ; 'John, K9EL' ; 
'William Liporace' ; 'Dx4win@Mailman. Qth. Net' 

Subject: Re: [Dx4win] Interface JT-Alert with DX4WIN?

There doesn't appear to be a simple way to do this, as far as I can tell. I 
think that Paul would need to make some kind of an interface available.

There might be some way to have JT-AlertX do a period ingest of an ADI file to 
get the countries, but I just decided that I'd treat everything as a new one on 
FT8 so I haven't bothered to try (though fortunately my needed list of ATNO is 
small enough to enter manually).

-Original Message-
From: dx4win-boun...@mailman.qth.net  On Behalf 
Of Dennis Petrich
Sent: Friday, April 06, 2018 11:11 AM
To: John, K9EL ; 'William Liporace' ; 
'Dx4win@Mailman. Qth. Net' 
Subject: [Dx4win] Interface JT-Alert with DX4WIN?

Has anyone on the reflector interfaced DX4WIN with JT-Alert with respect to 
keeping up with the countries you have worked and so on?

Dennis, k0eoo

Sent from Mail for Windows 10

From: John, K9EL
Sent: Wednesday, April 4, 2018 6:26 PM
To: 'William Liporace'; 'Dennis Petrich'; 'Dx4win@Mailman. Qth. Net'
Subject: RE: [Dx4win] Importing WXJT-X ADI file into DX4WIN V9?

You can also navigate to the WSJT-X adi file, create a shortcut and then move 
that shortcut to your DX4Win SAVE folder.


73,
John K9EL

-Original Message-
From: dx4win-boun...@mailman.qth.net  On Behalf 
Of William Liporace
Sent: Wednesday, April 04, 2018 6:01 PM
To: Dennis Petrich ; Dx4win@Mailman. Qth. Net 

Subject: Re: [Dx4win] Importing WXJT-X ADI file into DX4WIN V9?

From his email:
I got tired of navigating to the WSJT-X directory every time I wanted to import 
my WSJT-X log into DX4WIN.  Fortunately, Windows 10 has a solution.  The idea 
is to create a symbolic link in your SAVE directory that points to the WSJT-X 
log directory.  The full instructions for creating symbolic links are here:

https://www.howtogeek.com/howto/16226/complete-guide-to-
symbolic-links-symlinks-on-windows-or-linux/

Here's the quick start:

1.  Start by opening a Command Prompt in Administrator mode.  From the Start 
menu, find "Windows System" and right-click on "Command Prompt'.
Follow the "More" link and then click "Run as Administrator".

2.  Determine the location of your WSJT-X log directory.  Here is one way:

cd %localappdata%
C:
dir

You should see a WSJT-X directory there.  The full path should look 
something like this:

C:\Users\jjrei\AppData\Local\WSJT-X

3.  Now determine the location of your DX4WIN SAVE directory.  Mine is here:

E:\dx4w903\save

4.  "cd" into your DX4WIN save directory:

cd E:\dx4w903\save
E:

5.  Finally, create the link.  Here is the command I used:

E:\dx4w903\save> mklink /D WSJT-X C:\Users\jjrei\AppData\Local\WSJT-X

(do not type the part *before* the >, only the part beginning with "mklink"

That's all there is to it.  The next time you want to import using "File | 
Import", you will see the WSJT-X link in your SAVE directory.
Double-click on that link, and you'll find your WSJT-X ADIF file there.

This is not limited to WSJT-X, you can create links to anything you want.

73 - Jim AD1C

On Wed, Apr 4, 2018 at 6:57 PM, Dennis Petrich  wrote:

> Hi John, where do I find Jim’s shortcut?  I have already looked on the 
> DX4WIN Support page and found nothing pertaining to this subject.
>
> Thanks, Dennis
>
> Sent from Mail for Windows 10
>
> From: John, 

Re: [Dx4win] Radio (.rig) file for ICOM IC-7610

[Dan Violette]

Juan, Try Jim's APP Note:

http://dx4win.ad1c.us/appnotes/mmtty.html

Dan KI6X

-Original Message-
From: dx4win-boun...@mailman.qth.net  On
Behalf Of Juan Del Olmo, EA5FID
Sent: Sunday, March 25, 2018 1:19 AM
To: 'DX4WIN Reflector' 
Subject: Re: [Dx4win] Radio (.rig) file for ICOM IC-7610

Jim, many thanks !!!

 

Now it works perfectly, but I need the Dx4Win to work with the MMTTY too. 

 

Can somebody help me ?

 

Thanks in advance, 73

 

EA5FID

Juan Del Olmo

ea5...@lynxdxg.com  

http://lynxdxg.com/ 

EA1DX ArCluster 185.73.168.155:23

 

 

-Mensaje original-
De: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
En nombre de Jim Reisert AD1C
Enviado el: sábado, 24 de marzo de 2018 23:30
Para: DX4WIN Reflector
Asunto: [Dx4win] Radio (.rig) file for ICOM IC-7610

 

I finally uploaded some ICOM IC-7610 files to my web site:

 

http://dx4win.ad1c.us/radios/

 

They have been tested with DX4WIN 9.0x. There are two versions - one that
sets the CW filter to 250 Hz bandwidth when you double-click on a DX spot,
and another that sets the CW filter to 500 Hz bandwidth.

 

I make no promises as to whether they work on older versions of DX4WIN.  If
you want to try them with an older version of DX4WIN, please report your
results to the DX4WIN reflector.

 

If you run into any problems using these files, please report the

problelm(s) to the DX4WIN reflector.

 

73 - Jim AD1C

 

--

Jim Reisert AD1C, <  jjreis...@alum.mit.edu>,
 http://www.ad1c.us
__

DX4WIN mailing list

Home:  
http://mailman.qth.net/mailman/listinfo/dx4win

Help:   http://mailman.qth.net/mmfaq.htm

Post:   mailto:DX4WIN@mailman.qth.net

Message delivered to   ea5...@lynxdxg.com

 

This list hosted by:   http://www.qsl.net

Please help support this email list:  
http://www.qsl.net/donate.html



---
El software de antivirus Avast ha analizado este correo electrónico en busca
de virus.
https://www.avast.com/antivirus
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to dank...@socal.rr.com

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to arch...@mail-archive.com

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Dx4win] Search for RST = 0

[Dan Violette]

Is there a way to search for RST of 0?  I have used that for NIL and DX4WIN
will not let me search for that.

 

Dan KI6X

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to arch...@mail-archive.com

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] What do you do for LoTW DXCC_QSLs... entries that have wrong or bogus dates?

[Dan Violette]

That's what I was going to basically say.  Never will be a LoTW match unless
they go back.  You uploaded with the correct info in case they do?  As long
as the records match credits you are fine and all you can do.  I too have
DXCC submittals from 80's - 90's and all they did was write the call suffix
on the proper record sheet (SSB, CW, etc.) and did not note date, band, even
mode in some cases.

/Dan, KI6X

-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf Of Rick Murphy
Sent: Monday, February 12, 2018 4:46 PM
To: Lee Hallin 
Cc: dx4win@mailman.qth.net
Subject: Re: [Dx4win] What do you do for LoTW DXCC_QSLs... entries that have
wrong or bogus dates?

These are probably pre-computerization QSLs. I have several DXCC records
that have no info other than a entity name since I've never submitted a
paper card or LoTW credit since computerization.
For example, this one:

*Worked Station*
*Worked*   002
*DXCC*   ABU AIL ISLANDS (DELETED) (2)
*Date*   1945-11-15
*Mode*   UNKNOWN
*Band*   UNKNOWN
There's no QSO details for LoTW to provide since there's no QSO details
recorded. I occasionally submit QSLs to fill in the details for these,
especially back when a submission allowed 100 QSLs.
73
-Rick

On Mon, Feb 12, 2018 at 6:32 PM, Lee Hallin  wrote:

> I have found that sometimes the entry in the DXCC_QSLs... file (that 
> you download from LoTW to show DXCC confirmations) has the wrong date.  
> The date seems to be "guessed" by LoTW.  For instance, the 
> confirmation QSO date for a QSO says 19890101 when in reality the date 
> of the QSO was 19890304.  In this case, do you create a "dummy" QSO 
> for 19890101 and, perhaps via "Notes for this QSO", point to the QSO 
> in your log when you "really" worked them?
>
> Or do you just keep track of the QSOs in DXCCQSLs that are wrong and 
> ignore them when they are shown as "unmatched" in your log?
>
> Other ideas?
>
> Thanks & 73,
> Lee  N7NU
>
> P.S.  Another date I have seen many times is 19451115; the date that 
> DXCC started.
>
> __
> DX4WIN mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:DX4WIN@mailman.qth.net
> Message delivered to k1mu.nos...@gmail.com
>
> This list hosted by: http://www.qsl.net Please help support this email 
> list: http://www.qsl.net/donate.html
>



--
Rick Murphy, CISSP-ISSAP, K1MU/4, Annandale VA USA
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to dank...@socal.rr.com

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to arch...@mail-archive.com

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Multiple Calls - LOTW - QSLing

[Dan Violette]

Not sure of specific problem but want to make sure you understand that Group
000 is ALL CALLS.  So, if you select Group 000 all QSOs/QSLs from your log
are selected, no matter the actual call used or group number.   Group 000
would select your Groups 000, 001, 002 and any others you create.

Dan KI6X

-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf Of William Liporace
Sent: Saturday, January 20, 2018 7:25 AM
To: Dx4win@Mailman. Qth. Net 
Subject: [Dx4win] Multiple Calls - LOTW - QSLing

OK, I guess I am missing something and have tried following the info here:
http://dx4win.ad1c.us/appnotes/nr7.html

It appears that two of my group filters may work, but one does not. I want
to be able to filter my log so I can sign and upload the correct info.

So I have created three Groups - One for each call
000 - WC2L
001 - NA2NA
002 - KB2HUN

Under Selection Editor I created three Selections
000 - WC2L-QSL
001 - NA2NA-QSL
002 - KB2HUN-QSL
They are all Group/Date filters  The WC2L & KB2HUN appear to work, The NA2NA
does not. They are all configured what I think is right. I have not tested
any of them.

Ideas and Suggestions??
TNX Will WC2L
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to dank...@socal.rr.com

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to arch...@mail-archive.com

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] FT8

[Dan Violette]

You must have DX4WIN V9 to have the FT8 mode included.  Which version do you 
have?  There is a work around for V8:

Set those QSOs to an unused mode like "TOR" and then update TQSL settings to 
convert TOR to FT8 upon upload to LoTW - OR - edit the ADIF from TOR to FT8 
before upload.  Note if you use another mode and edit the ADIF that the length 
of the MODE field is 3 when FT8 is used.  Later when you upgrade, you can 
convert all 'TOR' QSOs easily to 'FT8'.

Dan KI6X

-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net] On 
Behalf Of w...@att.net
Sent: Tuesday, December 26, 2017 8:53 AM
To: dx4win@mailman.qth.net
Subject: [Dx4win] FT8

Hi When I imported to Dx4-from WSJT-X,it imported as CW mode?
 How do I change it to FT8(don’t see a listing)?
To eventually get it to LoTW
thank you in 73 de Bernie/WO2N.>

Sent from my iPhone X
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to dank...@socal.rr.com

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to arch...@mail-archive.com

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Keying a radio with a USB to parallel port adapter

[Dan Violette]

Desktop or laptop PC?  The desktop with a PCI parallel/serial port card works 
great.  Dan KI6X

-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net] On 
Behalf Of John Pritt
Sent: Friday, December 15, 2017 2:04 PM
To: dx4win@mailman.qth.net
Subject: [Dx4win] Keying a radio with a USB to parallel port adapter

Has anyone had any luck keying a radio using an USB to printer adapter? I just 
purchased a new PC and of course it doesn't have a conventional serial port or 
printer port.  I purchased a USB to Serial adapter and installed it and that 
works great to my Ten Tec Omni VI with DX4WIN V8. I plugged the USB to Printer 
adapter in but it is not showing up on the device manager screen.  The adapter 
is sold under the name of UGREEN.  I would really appreciate some input on this 
idea or must I key the radio using a USB to serial port adapter?

Thank you,

John  (N1JP)

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to dank...@socal.rr.com

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to arch...@mail-archive.com

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] HELP

[Dan Violette]

You better give all the details:

Each install from the original download (including new license) or did you
do some copy?
Your log is ONLY on the first PC and not on a shared drive somewhere?
Is your old DX4WIN log available to the new program on the new PC?
When you say 20 QSLs, do you mean 20 QSOs were inputted and now 5000 of
yours are there on the new PC?

Etc.

/Dan KI6X

-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf Of Gene Alward
Sent: Saturday, November 25, 2017 9:37 AM
To: DX4WIN@mailman.qth.net
Subject: [Dx4win] HELP

I loaded DX4WIN 9.0.3 on my Dell desktop and all went well and I entered
about 20 QSL's to be sure it all worked correctly and when it did show the
20 QSL's in the log I assumed all was well so I proceeded to load the same
program into my NEW Dell laptop that had never had a logging program on it
and after I had loaded the same 20 QSL'S I then I checked the logbook and
found over 5000 contacts listed and a spot check showed that at least the
ones I checked were mine.  How did this list get in there and where did it
come from.  I am sure Jim does not keep a record of our QSO'S and I am
wondering if anybody has ever had this happen.  I am hesitant to ask the
group for fear they may have me committed since it sounds so crazy but it
happened.

 

Any answers, guesses, or thoughts in general would surely be helpful.

 

Gene

W4WKB

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to dank...@socal.rr.com

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to arch...@mail-archive.com

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] VERSION 9 MANUAL

[Dan Violette]

Which file you wanting to print?  In the DOCS subfolder are some PDF files
which are easy to print.  One is Version 7 manual (which I printed years ago
and still reference but marked up for V8 some).  Also another noted as the
HELP file, I THINK, is the help file for V9 put into a document.  I would
need to read the archives of this list again.  I think Paul said that.  It
is some 246 pages long though.

Dan KI6X

-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf Of Gene Alward
Sent: Thursday, November 23, 2017 5:50 AM
To: DX4WIN@mailman.qth.net
Subject: [Dx4win] VERSION 9 MANUAL

Good morning and a Happy Thanksgiving to the group.

 

I would like to print the complete manual for version 9 that came with the
download but I don't see a way to do that.  Is it possible to do that and I
am too dumb to figure it out?

 

Version 9.03 sure works great and it is exciting to have it to use.

 

Thanks for your help.

 

Gene

W4WKB

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to dank...@socal.rr.com

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to arch...@mail-archive.com

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] DX4WIN V9

[Dan Violette]

Doyle - File ends in ".dx4w9", correct?  Make sure it is in your DX4W90x folder 
(x being another number, probably DX4W901 but maybe the later updates 
originally installed create another name matching the version) and not being 
saved in an older version folder by mistake.

All - Speaking of that, makes me wonder, would there be much of a problem 
renaming the folder to end in the 9 (i.e., DX4W9).  Would that affect more than 
just the log not being found the first time (which might still be found since 
launching out of that folder).  Thinking out loud before trying...

Dan KI6X

-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net] On 
Behalf Of Doyle
Sent: Wednesday, November 22, 2017 4:23 PM
To: dx4win@mailman.qth.net
Subject: [Dx4win] DX4WIN V9

*Need a little help.*

*I received the DX4WIN9 license file.*
Make
*Extracted it into the DX4WIN9 file where the DX4WIN9 EXE is located.*

*Rebooted the computer.
*

*I still keep getting "NO LICENSE FILE FOUND"*

*What am I doing wrong?*

*Doyle/N4VV
*

*
*


__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to dank...@socal.rr.com

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to arch...@mail-archive.com

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Rig file ? Kenwood TS690S

[Dan Violette]

I would try the TS-850 if someone with the radio does not answer you.  About
same vintage.  Not sure how it would handle 6M+ though auto selections.
Most Kenwoods are almost the same in radio control.  Can create a custom RIG
file if something missing.  Just start with the closest Kenwood first.  I
have not done that but many have on here and someone may have a 690 rig file
they created already.

Dan

-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf Of Luis Teixeira
Sent: Monday, November 20, 2017 8:12 AM
To: DX4WIN Reflector 
Subject: [Dx4win] Rig file ? Kenwood TS690S

Trying to configurate one Kenwood TS690S with DX4Win V.9, but this one is
not listed in the list of Radio models. Should I use another configuration
instead?
Thanks and best 73 de Luis, CT4NH
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to dank...@socal.rr.com

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to arch...@mail-archive.com

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Printing Direct To QSL

[Dan Violette]

Been a long time since I set this up.  I have a "paper size" set in my
PRINTER preferences itself called "QSL Card" (you can call it anything).
Then I choose that from the custom paper.  Hopefully this gets you started.
I could do some more research if needed.  It is nice putting a pile of my
printed cards with a blank spot for QSL info in the laser printer and just
spitting them out.  Global QSL though has cut back my use of that ability a
lot.

Dan KI6X

-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf Of Mike Rhodes
Sent: Monday, October 23, 2017 6:22 PM
To: 'DX4WIN' 
Subject: [Dx4win] Printing Direct To QSL

OK, I used to know how to do this but have obviously forgotten.

Using Version 9

I am setting up (trying to that is) to print directly to one of my
pre-printed QSLs. The card is 5.5W x 3.5H. The info needs to print in the
top right corner, starting at 2.81 from the left and the size of the
printing window is 2.69 x 1.69 inches.

I have created a custom label (Custom1) with label width and height set as
above. Spacing left is 2.81 and spacing top is .16. Nr Across and Down is 1.
I have set a custom paper size of 5.5 x 3.5 and that seems to be the issue.
When I click Ok, I get a "Not able to set Custom Paper Size" message. In
'Preview', I get a graphic of the label in the correct position but the page
size is 8.5 x 11.

Just found out that it does not like 4 x 6 but accepts 5 x 7.

Am I missing something or is what I'm trying to do just plain illegal?

Thanks,
Mike / W8DN
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to dank...@socal.rr.com

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to arch...@mail-archive.com

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Entry Window Smaller In VErsion 9.0.1

[Dan Violette]

File - Preferences - Screen  --  I have been seeing a lot of people talking 
about having 80% in there.  100% should do it.  Mine was and stayed at 100%.  
Dan KI6X

-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net] On 
Behalf Of Bud Governale, W3LL
Sent: Sunday, October 22, 2017 11:43 AM
To: dx4win@mailman.qth.net
Subject: [Dx4win] Entry Window Smaller In VErsion 9.0.1

My entry window is smaller in version 9.

Example: 3-1/2” wide by 4” high in Ver. 9.0.1

and 4-1/2” wide by 4” high in Ver. 8.05

All my other windows opened in their correct positions and size.

How do I fix this?

73,

Bud W3LL
w...@arrl.net
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to dank...@socal.rr.com

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to arch...@mail-archive.com

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Packet Filtering

[Dan Violette]

Don't see a reply yet.  I am not the best to answer since I let everything
through, but some things I do know:

DX Alerts are the audible notices.  This allows you to specify what you want
announced (voice, alarm, etc,)
Ignore Gray/Black I think is the highest level you can go to block.

I do not think this would work, but, have you tried setting the color for
the items you do not want to see to black?  Maybe you only want level 1, 2,
3 then set 4+ to black (or gray).  Pay careful attention to what each level
does.  I think there is some overlap.  I want new bands and modes for each
DXCC and level 6 is more important to me than 4 & 5.  I pay attention to all
background highlighted spots.  That is if I have kept the default spot
colors where levels 1, 2, 3 & 6 are highlighted.  I may have done that
myself (forget since have had Ver 8 since it first came out years ago).

Dan, KI6X

-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf Of John Warburton
Sent: Thursday, October 12, 2017 2:03 PM
To: DX4WIN@mailman.qth.net
Subject: [Dx4win] Packet Filtering

Hi

I'd like to filter out spots from the packet window that have a priority
level of 6 or above.

The following parameters have been set:

Preferences | Packet 1 | DX Alerts = Award Band not conf

Preferences | Packet 1 |Options | Spots to Ignore = Gray and Black (this is
confirmed to filter out P8 and P9 spots)

Yet still I see spots in the packet window of priority 6 and 7 - in addition
to those I want of P1-P5 (well I see P2-P5 anyway).

Actually the DX Alerts setting doesn't seem to make much difference.

Am I doing something wrong or is there a bug?

73 John G4IRN.

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] question (FT8)

[Dan Violette]

Many of use change the mode to "TOR".  This leave the 3 characters in the
ADIF, you can have TQSL convert TOR to FT8 upon upload, and when DX4WIN
(version 9 in beta) comes out you can sort by TOR and change to FT8
(assuming you have not used TOR for real - it is not an ADIF mode so should
never have been used).  I even change the WSJT-X mode in the ADI file to TOR
after I transfer (find/replace) so I can keep the ADI file for checking for
worked before and I can specify "Ignore Duplicate QSOs" when I import so I
don't get doubles

Dan KI6X

-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf Of Robert Garceau
Sent: Friday, September 29, 2017 12:33 PM
To: dx4win@mailman.qth.net
Subject: [Dx4win] question

I have been uploading JT65 logs and JT65 shows up in the mode block.
However, I recently started using FT8 and when I upload to DX4WIN the mode
block shows SSB.  How do I change that, if I can? Of do I need to wait until
the next version?

 

I have been uploading the adif file direct to LOTW to bypass the DX4WIN
upload, so I can get credit for contacts.

 

Bob, W1EQ 

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] How do I modify ADIF so that I can upload FT8 QSO's?

[Dan Violette]

And I am logging FT8 as FAX so that I can do a global find/replace in the
ADIF file before upload.  The  will not need to be changed since
both have 3 characters.  I have not used FAX ever so will do the same in my
log when the next version (or another logging program I change to) has FT8
available.  

Dan, KI6X

-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf Of Mark Lunday
Sent: Monday, August 14, 2017 6:42 PM
To: DX4WIN Reflector 
Subject: [Dx4win] How do I modify ADIF so that I can upload FT8 QSO's?

I know we don't have that update yet.  How are other folks doing the mod?

Mark Lunday, WD4ELG
Greensboro, NC  FM06be
wd4...@arrl.net
http://wd4elg.blogspot.com
SKCC #16439  FISTS #17972



__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] JT65 in report

[Dan Violette]

Filter for JT65 before creating the Report.  Dan KI6X

-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf Of Robert Garceau
Sent: Friday, August 11, 2017 1:14 PM
To: dx4win@mailman.qth.net
Subject: [Dx4win] JT65 in report

How do I get the JT65 mode into the reports?

I have logged over 100 Q's and the they do show up at JT65 in the mode
column of the logbook.

 

I'm trying to determine which DX countries I have worked..

 

Bob, W1EQ

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] ADI Import Having Duplicates Rejected

[Dan Violette]

Check the options in the drop down list when you are ready to import.  "Issue 
Warning and Stop" is not the only choice, only the default.  Dan KI6X

-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net] On 
Behalf Of Bud Governale, W3LL
Sent: Tuesday, July 4, 2017 6:13 PM
To: dx4win@mailman.qth.net
Subject: [Dx4win] ADI Import Having Duplicates Rejected

I imported the WSJT-X adi file containing my first QSO into DX4WIN. It went 
perfectly. The DX4WIN log shows mode JT65. Perfect.

The WSJT-X adi file now has three qso’s including the first one.

DX4WIN rejected the import because of the one duplicate QSO.

How do I set DX4WIN to accept all duplicates in the adi file?

73,

Bud W3LL
w...@arrl.net
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Problem with DX4WIN 8.05

[Dan Violette]

How did you transfer?  If you IMPORTED to 8.05 from an export from another
major version, it would be another format and make sure you select the
correct filetype (.DX4WN8, .DX4WIN6, etc.).  I think 6 and 7 are the same.
DX4WIN8 changed the log.

Dan KI6X

-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf Of Carol Richards
Sent: Sunday, June 11, 2017 12:35 PM
To: dx4win@mailman.qth.net
Subject: [Dx4win] Problem with DX4WIN 8.05

Hello all,

When I transferred over to DX4WIN 8.05 on a win 7 machine, things are not
quite right. I had my contacts from my XP-machine saved on a flash drive. I
imported them to the WIN7 machine which has 8.05 on it. All 420K qsos
imported very nicely except for one problem...All of my qso info is gone;
i.e.; names, qth's, etc. Only the call sign and all the qsos related to the
call sign appear..Just no information.


Any thoughts?



Carol


__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] DX4WIN Digest, Vol 157, Issue 1

[Dan Violette]

Go to the home webpage listed at the bottom and go to existing members and
edit the choice.  Dan KI6X

-Original Message-
From: DX4WIN [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of Dean
Norris
Sent: Tuesday, May 2, 2017 7:28 AM
To: dx4win@mailman.qth.net
Subject: Re: [Dx4win] DX4WIN Digest, Vol 157, Issue 1

How do I switch from the digest view  to individual form of messages?


TIA



End of DX4WIN Digest, Vol 157, Issue 1
**
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] LOTW issue

[Dan Violette]

Mine match in my records so can't investigate my own.  Maybe you worked a
station (more than one or one more than once) that their operation was later
disallowed and the confirmations removed.  I do not know how they remove
LoTW QSLs for illegal operations.  For paper QSLs they catch it if you try
to submit.  Dan KI6X

-Original Message-
From: DX4WIN [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of WA7AA
Sent: Wednesday, April 26, 2017 1:46 PM
To: dx4win@mailman.qth.net
Subject: Re: [Dx4win] LOTW issue

On 26-Apr-17 12:04, PY2YP wrote:
> The ARRL has answered my question:
> 
>
> Cesar,
>
> I spoke with the IT Department and they tell me that the difference in 
> those numbers can be caused by many different things.
>
> One of them is that when contact are manually removed or updated, the 
> system does not automatically correct itself.
>
> It looks like that someone you worked had some contacts removed from 
> the system, which is affecting your totals.


Yeah, except for this:

-

*Can I delete QSOs that I've submitted?*

No. If you've submitted a QSO containing erroneous information, correct 
the information and submit the QSO again 
.

-


So how can the total be affected with an action that can not be taken?


WA7AA

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] LOTW issue

[Dan Violette]

Try Jim's comparison software. 

http://dx4win.ad1c.us/lotw/index.html

Dan, KI6X

-Original Message-
From: DX4WIN [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of PY2YP
Sent: Monday, April 24, 2017 3:40 AM
To: DX4WIN Reflector 
Subject: [Dx4win] LOTW issue

Hello

I wonder what am I missing regarding this LOTW issue:
I hold 4 callsigns: PY2YP, PY9UC, PR2O and ZZ2Z. The LOTW under the QSOs
menu shows the following statistics:
PY2YP: 9,412 QSLs;
PY9UC: 17 QSLs;
PR2O: 1,100 QSLs;
ZZ2Z: 5,131 QSLs.
The total is: 15,660 QSLs

However the "Your QSOs" page shows:
You have 57,993 QSO records
You have 15,662 QSL records

Where are the missing 2 QSLs?

--
73 DX de PY2YP - Cesar
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] DX4Win805 and a new computer.

[Dan Violette]

If old PC is also 8.05 you can actually copy the whole directory and not even 
"install" on new PC.  Just put shortcut on new PC.  I think the "SAVE" 
directory, your license in the root and any other files in the root you do not 
have would work.  But, I would just copy everything and put shortcut.  I have 
done that.

Dan KI6X  

-Original Message-
From: DX4WIN [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of Joe via DX4WIN
Sent: Monday, February 6, 2017 5:06 PM
To: DX4WIN@mailman.qth.net
Subject: [Dx4win] DX4Win805 and a new computer.

 I will soon be installing DX4Win805 on a new computer.After the installation 
has been completed what do I needto transfer from the old computer to the new 
computer,as far as configuration data etc., so that both computersare the same 
as far as DX4Win805 is concerned?
Thanks de Joe w6rll. 
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] JT65A

[Dan Violette]

Easier to do in person.  Basic ideas:  Run in CW part of band first and get 
signal on the screen.  Should be blue/gray background with yellow signal 
(something like that, going by memory don't do too often).  Makes sure wide 
filter and there is a slider for shooting for 0 when no signal (and + numbers 
when signal).  When you see a signal, go to 14.076 and see if you find some 
JT65 there.  Make sure either digital mode or USB depending on what radio 
recommends.  If you hear something, it should decode at the end of the minute 
(46 seconds after).  Do that a bit until you are comfortable receiving.  Then 
TX is a combination of speaker output from the PC and radio mic gain along with 
PTT.  More difficult but get the RX first.

This all assumes you have the audio lines from the PC to the radio correct.  
May need to find a local friend who has done it.

Dan KI6X

-Original Message-
From: DX4WIN [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of Courtney Judd
Sent: Thursday, August 11, 2016 3:03 PM
To: Joe Subich, W4TV 
Cc: ACG ; SECC ; 
Dx4win@mailman.qth.net
Subject: Re: [Dx4win] JT65A

ok, I use a 2000D hooked to my computer via a microKeyer 2 by microHAM. 
I downloaded JT65-hf and it seemed to be much simpler. I have com port 3 for 
keying and rig control/freq etc selected as it is that way in the microHAM 
router. BUT, it will key but no audio received or sent and no freq showing. I 
have tried all combos of listed devices and no luck. 
Somehow I knew that this was not going to be easy!! lol any help/ideas? 
thanks Cort K4WI

> Joe Subich, W4TV  Thursday, August 11, 2016 
> 10:32 AM
>
> On 8/11/2016 10:40 AM, Björn Ekelund wrote:
> > If you use any of Microham's USB enabled units (CW keyers, TNC, rig
> > controllers...) this functionality is built in.
>
> Only microHAM "Keyer" series interfaces (microkeyer, microkeyer II, 
> digikeyer, digikeyer II, CW Keyer or MK2R+).  USB Interface II and USB 
> Interface III do not provide the CAT/2nd CAT capability as they have 
> no internal microprocessor.
>
> 73,
>
>... Joe, W4TV
>
>
>
> __
> DX4WIN mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:DX4WIN@mailman.qth.net
>
> This list hosted by: http://www.qsl.net Please help support this email 
> list: http://www.qsl.net/donate.html
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] MMTTY

[Dan Violette]

Bjorn, Tested mine.  It does it too.  Plays the "asterisk" sound from Windows.  
Have not had 2 sound cards long so never really paid attention to it.  My theme 
plays a quiet "strum" that would hardly be heard over the RTTY and monitor I 
usually listen to at the same time.  Don't contest with DX4WIN so never really 
noticed.

Dan KI6X 

-Original Message-
From: DX4WIN [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of Björn Ekelund
Sent: Friday, July 1, 2016 12:41 AM
To: dx4win@mailman.qth.net
Subject: Re: [Dx4win] MMTTY

Hi List,

Thank you for all the responses.

I now know %X/%e are valid macro tokens used to switch on/off FSK transmission 
in the DX4Win GUI for MMTTY.

However the "ding mystery" remains unsolved.

I have made the following observations:

The loudspeaker ding is associated with using the %X token (start FSK
transmission) in a function key macro (e.g. F1). The %e (stop
transmission) creates no ding.

The actual sound made is called "Windows Background" and is also used e.g. when 
changing the Windows loudspeaker volume using the mouse in the system tray.

I have confirmed the issue on three different installations; A HP Pavilion 
Desktop running Swedish Windows 10, an ASUS UL-30VT Laptop running Swedish 
Windows 7 and an HP Folio Laptop running English Windows 7.

The ding sound comes through Windows' general audio channel, not the 
communications audio channel (which is used for e.g. the FSK audio from MMTTY). 
If you use an extra sound card (like I ended up doing) the ding will come 
through your loudspeakers and just annoy you.
However, more severely, if you use the PC's built-in sound card for the FSK 
signal the ding will overlay with the FSK and distort the first few characters 
of ALL your transmissions.

I have tried different settings in "keying setup" Alt-S with no effect.

I have tried placing the MMTTY executable in the default place (c:\program 
files\mmtty instead of c:\ham\mmtty where it is installed by default) with no 
effect

I have tried changing the settings on most things I find in the Preferences 
drop down with no effect.

I have also played around with the standalone version of MMTTY and it shows no 
such behavior (it uses backslash "\" as a token to turn on and off transmission 
in function key macros.)

Am I alone in seeing this?

Björn SM7IUN


2016-06-30 19:07 GMT+02:00 Björn Ekelund :
> Hi all,
>
> I have two questions relating to the MMTTY Window:
>
> 1. Where is the complete list of %macros? I can't seem to find it 
> anywhere in the help file or on the web. E.g. the %X macro that starts 
> transmission or the %M macro that I don't know the meaning of.
>
> 2. Is there a way to avoid/disable the "ding" in the loudspeaker when 
> executing the %X macro, e.g. in a CQ macro?
>
> thanks in advance,
>
> Björn
> SM7IUN
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] DX4WIN and SteppIR?

[Dan Violette]

I have DX4WIN at home and SteppIR at work club so could not answer direct
with that combo.  As long as DX4WN is following your radio OK then you "Y"
the SDA-100 from the same serial line and it listens in and sets itself too.
See:  http://www.steppir.com/wp-content/uploads/2011/10/Y-Cable.pdf
Dan KI6X

-Original Message-
From: DX4WIN [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of RadioDen45
Sent: Saturday, May 21, 2016 6:43 AM
To: Alan Zack ; 'Paul van der Eijk' 
Cc: dx4win@mailman.qth.net
Subject: [Dx4win] DX4WIN and SteppIR?

Hello all you out there in radio land,

I'm trying to setup V8.05 of DX4WIN to control my 3ele Steppir beam, I have
followed the HELP files but NO JOY.  Is any one out there controlling their
SteppIR with DX4WIN?  I'm using the SDA-100 controller...

Thanks in advance for any help.

Dennis, k0eoo 

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Confirmed to Submitted

[Dan Violette]

I knew Jim had it but did not find in my first pass (even though I have most
of the articles printed and could have looked in my manual notebook).

http://dx4win.ad1c.us/appnotes/dxcc.html

Dan, KI6X

-Original Message-
From: Dan Violette [mailto:dank...@socal.rr.com] 
Sent: Tuesday, March 29, 2016 6:30 PM
To: 'j...@w9rpm.com'; 'DX4WIN'
Subject: RE: [Dx4win] Confirmed to Submitted

John, Check out:

REPORTS (menu)
DXCC
Under Reports/Actions choose SUBMITTAL

I forget the details off the top of my head and don't want to mess up my log
to test right now.  It should just move the "C" to "S".  You can filter and
do it on the filtered items if you want.  I forget how I normally would do
it since I would probably have some duplicates for a band country.

Dan, KI6X

-Original Message-
From: DX4WIN [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of W9RPM
Sent: Tuesday, March 29, 2016 5:38 PM
To: DX4WIN
Subject: [Dx4win] Confirmed to Submitted

Is their a way to change all my Confirmed QSO to Submitted in one process?

73 John

--
EMAIL: j...@w9rpm.com
WEBPAGE: http://www.w9rpm.com/
Wisconsin VHF/UHF County Hunters: http://www.wivuch.com/ DX and CONTEST
CLUB: http://www.w9idx.com/ La Crosse Hams: http://www.lacrossehams.org/ AOL
IM: W9RPM
YAHOO: W9RPM

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Confirmed to Submitted

[Dan Violette]

John, Check out:

REPORTS (menu)
DXCC
Under Reports/Actions choose SUBMITTAL

I forget the details off the top of my head and don't want to mess up my log
to test right now.  It should just move the "C" to "S".  You can filter and
do it on the filtered items if you want.  I forget how I normally would do
it since I would probably have some duplicates for a band country.

Dan, KI6X

-Original Message-
From: DX4WIN [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of W9RPM
Sent: Tuesday, March 29, 2016 5:38 PM
To: DX4WIN
Subject: [Dx4win] Confirmed to Submitted

Is their a way to change all my Confirmed QSO to Submitted in one process?

73 John

--
EMAIL: j...@w9rpm.com
WEBPAGE: http://www.w9rpm.com/
Wisconsin VHF/UHF County Hunters: http://www.wivuch.com/ DX and CONTEST
CLUB: http://www.w9idx.com/ La Crosse Hams: http://www.lacrossehams.org/ AOL
IM: W9RPM
YAHOO: W9RPM

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Print QSL Cards

[Dan Violette]

Will, Is this preprinted cards and you want to go in a blank spot instead of
sticking on a label (that is what I do)?  What printer do you expect to use?
This will all help for replies since everyone is in a different situation
and lots of customizing needed.  Dan KI6X

-Original Message-
From: DX4WIN [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of William
Liporace
Sent: Sunday, March 20, 2016 5:07 PM
To: DX4WIN POSTINGS
Subject: [Dx4win] Print QSL Cards

I was looking at testing printing directly to QSL cards. I am using typical
QSL card stock that is 3.5x5.5. Can someone tell me how to get DX4WIN to
print directly on the cards??

TNX Will

--
William Liporace WC2L
http://www.wc2l.com or http://dxc.wc2l.com AR-Cluster Node  telnet
dxc.wc2l.com or 144.93 MHz w...@wc2l.com

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] rtty

[Dan Violette]

Good read Bud.  I missed the "x" versus "X".  Cort, that will do it.  DX4WIN
list:

http://www.dx4win.com/HelpVer804/index.html?noteeditfunckeys.htm

Dan, KI6X

-Original Message-
From: DX4WIN [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of Bud Semon
Sent: Sunday, January 17, 2016 2:28 PM
To: Courtney Judd; DX4WIN@mailman.qth.net
Subject: Re: [Dx4win] rtty

Cort,

%x (small x) sends the date, so that is why you are sending the date.  I
think you want %X (capital X), which starts the transmission - even though
it says starts a PSK transmission.  %X is what I am using.

Offhand, I can't find the complete definitions of all the control keys with
capital letters - maybe someone else can point us at it.

Good luck.

73, Bud N7CW

On Sun, Jan 17, 2016 at 2:52 PM, Courtney Judd  wrote:

> hi all need some help getting mmtty to work in dx4win. I am trying to 
> get the rtty buttons programed but I am not clear on what %(letter) 
> starts transmission. %e stops it. I have %x will start it but sends a 
> date along with it which is not what I want. F1 button is this: 
> CQ|%x%Mcq cq cq de %~ %~%m%E .This works but sends 1/16/2016 in front 
> of CQ etc. The help file shows nothing other than %M, %C, and %X 
> what to use in place? thanks Cort K4WI 
> __
> DX4WIN mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:DX4WIN@mailman.qth.net
>
> This list hosted by: http://www.qsl.net Please help support this email 
> list: http://www.qsl.net/donate.html
>
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Wasted label

[Dan Violette]

Mine saved and is always unchecked.  Dan KI6X

-Original Message-
From: DX4WIN [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of w...@att.net
Sent: Tuesday, December 29, 2015 9:50 AM
To: 'Doug Joyce'
Cc: 'dx4win@mailman. qth. net'
Subject: Re: [Dx4win] Wasted label

Tnx for Info, but does it save the change, or do you have to keep unchecking 
the box?
Bernie

-Original Message-
From: Doug Joyce [mailto:d_jo...@sympatico.ca]
Sent: Tuesday, December 29, 2015 12:39 PM
To: w...@att.net
Cc: dx4win@mailman. qth. net
Subject: Re: [Dx4win] Wasted label

GA Bernie:

In the log Window, click on QSLs >Print QSL Labels and in the next box that 
opens un check the “Print Method Labels” line.

73,  Doug  VE3MV


> On 2015-Dec-29, at 12:08 PM, w...@att.net wrote:
> 
> Hi, When I print QSl labels first label is Method = Buro, How do you 
> remove ?
> Tnx for help 73 de Bernie/WO2N.>
> 
> 
> __
> DX4WIN mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:DX4WIN@mailman.qth.net
> 
> This list hosted by: http://www.qsl.net Please help support this email
> list: http://www.qsl.net/donate.html
> 


__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Wasted label

[Dan Violette]

Uncheck "Print Method Labels" before printing.  Dan

-Original Message-
From: DX4WIN [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of
w...@att.net
Sent: Tuesday, December 29, 2015 9:08 AM
To: dx4win@mailman. qth. net 
Subject: [Dx4win] Wasted label

Hi, When I print QSl labels first label is Method = Buro, How do you remove
?
Tnx for help 73 de Bernie/WO2N.>


__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Only one label

[Dan Violette]

If it is marked as Mailed (M) then there is a date it was mailed and then
printing assumes already sent and does not print.  Remove the date mailed
when you mark it Y for Label and it should change to Label (L) and show up.
Try one and if works you can search for all "Y" in Label and then under QSLs
menu can clear date for the filtered items (make back up of file in case
accidently remove all dates or the like).

Have not tested for your situation to not 100% sure I have the answer.

Dan KI6X

-Original Message-
From: DX4WIN [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of
w...@att.net
Sent: Monday, December 21, 2015 3:08 PM
To: dx4win@mailman.qth.net
Subject: [Dx4win] Only one label

Just upgraded from version five to version eight imported my log everything
went smoothly I have about 100 QSO classified as M mailed when I bring up
the QSO's and change to label yes , when I go to print labels all it says is
one label Everything that I see the six boxes are unconfirmed?
Got me puzzled
Tnx for help Bernie/WO2N.>


Sent from my iPhone 5s >



__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Unable to Show 80/160 Spots

[Dan Violette]

If you are showing DXCC (default) packet spots then look at REPORTS / AWARDS
and DXCC checked off settings.  Dan KI6X

-Original Message-
From: DX4WIN [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of Byron
Peebles
Sent: Sunday, December 6, 2015 3:06 PM
To: dx4win@mailman.qth.net
Subject: [Dx4win] Unable to Show 80/160 Spots

I recently redeployed my 80/160 sloper and I can't seem to get the spots for
those bands.
I have confirmed the spots are showing in the packet window and that the
bands are checked in the packet setup preference, but no spots for either of
those bands appear.  Even "DX TEST 3525" shows nothing.

What am I missing?

73, Byron

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] F9 key on new Windows 10 PC

[Dan Violette]

No problem for me.  Used F9 this weekend.  Must be a custom redirect for
your PC.  Dan KI6X

-Original Message-
From: DX4WIN [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of Rick
Sent: Monday, November 30, 2015 3:52 PM
To: dx4win@mailman.qth.net
Subject: [Dx4win] F9 key on new Windows 10 PC

I just got a new Windows 10 laptop. DX4WIN works fine on it, other than one
very annoying problem. I wonder if anyone has the same problem, and/or has
been able to fix it:

Normally, Dx4WIN uses the F9 function key as a shortcut to select "add real
time" on the input window. But with my new PC, I always get a search window
when I hit F9. I can select add real time by using my mouse, but I would
really like to be able to use the F9 key.

If anyone has had the same problem and has found a work-around, I'd like to
know about it.

Thanks, Rick K0XB

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] VUCC Report Blank

[Dan Violette]

Thanks much Arne, that did it.  I kept looking at VUCC in the report awards.
Now I think I know what happened.  When I upgraded with Win 10 and had
changes in ports, I loaded an old INI without that and forgot to edit that.
I knew something to do with no bands to choose in the award report was the
issue.

Can be frustrating when you know you are missing something obvious!

Dan KI6X

-Original Message-
From: Dan Violette [mailto:dank...@socal.rr.com] 
Sent: Wednesday, November 25, 2015 6:33 PM
To: 'DX4WIN@mailman.qth.net'
Subject: RE: [Dx4win] VUCC Report Blank

Now I realize the VUCC field should be blank since I never submitted
anything.  Just not getting W/C results in my VUCC Report.  Dan KI6X

-Original Message-
From: DX4WIN [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of Dan
Violette
Sent: Wednesday, November 25, 2015 5:12 PM
To: DX4WIN@mailman.qth.net
Subject: [Dx4win] VUCC Report Blank

I have done this every few months for a couple years now and cannot today
after an hour trying.  I am trying to get a VUCC report of my grids worked
and confirmed. I then save as CSV and edit in Excel to have paper report.

 

All VUCC reports are blank (some say "prefix" in the first column where I
would suspect "grid")

My VUCC field is blank for any QSO record (Searched VUCC Mixed field for C
or S)

 

I just can't figure out what is wrong and can't get C & W report for the
grids.

 

/Dan, KI6X

 

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] VUCC Report Blank

[Dan Violette]

(missed the full chain of the help to get into the archives so sending again
- each reflector does things different so get different results on "reply",
etc. - KI6X)

Thanks much Arne, that did it.  I kept looking at VUCC in the report awards.
Now I think I know what happened.  When I upgraded with Win 10 and had
changes in ports, I loaded an old INI without that and forgot to edit that.
I knew something to do with no bands to choose in the award report was the
issue.

Can be frustrating when you know you are missing something obvious!

Dan KI6X

-Original Message-

From: n...@comcast.net [mailto:n...@comcast.net] 
Sent: Wednesday, November 25, 2015 6:42 PM
To: Dan Violette
Subject: Re: [Dx4win] VUCC Report Blank

Dan
 
Have you checked the band boxes for VUCC in the SETUP Preferences?

Arne N7KA

-Original Message-----
From: Dan Violette [mailto:dank...@socal.rr.com] 
Sent: Wednesday, November 25, 2015 6:33 PM
To: 'DX4WIN@mailman.qth.net'
Subject: RE: [Dx4win] VUCC Report Blank

Now I realize the VUCC field should be blank since I never submitted
anything.  Just not getting W/C results in my VUCC Report.  Dan KI6X

-Original Message-
From: DX4WIN [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of Dan
Violette
Sent: Wednesday, November 25, 2015 5:12 PM
To: DX4WIN@mailman.qth.net
Subject: [Dx4win] VUCC Report Blank

I have done this every few months for a couple years now and cannot today
after an hour trying.  I am trying to get a VUCC report of my grids worked
and confirmed. I then save as CSV and edit in Excel to have paper report.

 

All VUCC reports are blank (some say "prefix" in the first column where I
would suspect "grid")

My VUCC field is blank for any QSO record (Searched VUCC Mixed field for C
or S)

 

I just can't figure out what is wrong and can't get C & W report for the
grids.

 

/Dan, KI6X

 

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] VUCC Report Blank

[Dan Violette]

Now I realize the VUCC field should be blank since I never submitted
anything.  Just not getting W/C results in my VUCC Report.  Dan KI6X

-Original Message-
From: DX4WIN [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of Dan
Violette
Sent: Wednesday, November 25, 2015 5:12 PM
To: DX4WIN@mailman.qth.net
Subject: [Dx4win] VUCC Report Blank

I have done this every few months for a couple years now and cannot today
after an hour trying.  I am trying to get a VUCC report of my grids worked
and confirmed. I then save as CSV and edit in Excel to have paper report.

 

All VUCC reports are blank (some say "prefix" in the first column where I
would suspect "grid")

My VUCC field is blank for any QSO record (Searched VUCC Mixed field for C
or S)

 

I just can't figure out what is wrong and can't get C & W report for the
grids.

 

/Dan, KI6X

 

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Dx4win] VUCC Report Blank

[Dan Violette]

I have done this every few months for a couple years now and cannot today
after an hour trying.  I am trying to get a VUCC report of my grids worked
and confirmed. I then save as CSV and edit in Excel to have paper report.

 

All VUCC reports are blank (some say "prefix" in the first column where I
would suspect "grid")

My VUCC field is blank for any QSO record (Searched VUCC Mixed field for C
or S)

 

I just can't figure out what is wrong and can't get C & W report for the
grids.

 

/Dan, KI6X

 

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] FW: HELP dx4win on new win10 computer

[Dan Violette]

Are the port numbers high (above 8)?  I think there is a limit but may be
mixing up the programs.  Dan KI6X

-Original Message-
From: DX4WIN [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of Howard
K2HK
Sent: Monday, November 2, 2015 4:13 PM
To: dx4win dx4
Subject: [Dx4win] FW: HELP dx4win on new win10 computer



From: ho...@hotmail.com
To: kr...@bellsouth.net
Subject: RE: [Dx4win] HELP dx4win on new win10 computer
Date: Mon, 2 Nov 2015 19:12:33 -0500




Bob,Thanks for the reply.To clarify. I do have communication with the USB
ports. I have searched for recent drivers and am up-to-date. The FTDI's  do
appear in in the device manager. My problem is on the other end . The rs232
serials not being seen by DX4win . From DX4win I can not log in to a cluster
site. Get no response. Same with the Winkeyer communicating
throughDX4win.???Howard

> From: kr...@bellsouth.net
> Subject: Re: [Dx4win] HELP dx4win on new win10 computer
> Date: Mon, 2 Nov 2015 16:47:44 -0500
> To: ho...@hotmail.com
> 
> So your saying you have no communication via your FTDI USB PORTS??
> Is any device working via the USB ports? Try a usb memory stick and see if
it sees it.
> If it does then the USB ports MIGHT be ok.
> If you are still having problems using the USB try going to the FTDI web
page and download current drivers for your FTDI USB ports.
> 
> The FTDI you see is it in the WIN 10 devices? Thats where you should 
> see your USB ports. If you do not see USB ports, you have a driver issue.
> 
> Bob
> 
> Sent from my iPad
> 
> > On Nov 2, 2015, at 3:57 PM, Howard K2HK  wrote:
> > 0 
> > Usually can work it out myself but this has me stymied. Copied
dx4win8.05 from my win7  computer to win10 computer. New computer has no
serial ports but I have FTDI interface that shows up in the device manager
as working.  Dx4win starts up but can not connect to internet connections. I
am using a Winkey as well which does not respond to the selected serial
ports. Running out f ideas. Any help?Howard...K2Hk 
> > __
> > DX4WIN mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/dx4win
> > Help: http://mailman.qth.net/mmfaq.htm
> > Post: mailto:DX4WIN@mailman.qth.net
> > 
> > This list hosted by: http://www.qsl.net Please help support this 
> > email list: http://www.qsl.net/donate.html
 

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Print details on QSO labels

[Dan Violette]

Yes, I was going to say the same thing.  Look at Jim's (AD1C) utility ADIF
to DX4WIN.  You can assign a group number, add a note, and couple other
nice things.  I use to import my contacts from club station to keep separate
from home station QSOs.  It originally was only for importing contests but I
asked Jim to add NONE for general QSO imports (been over 2 years since
that was added).

Dan, KI6X

-Original Message-
From: DX4WIN [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of Gerben
A.Menting - PG5M
Sent: Sunday, May 24, 2015 1:22 AM
To: 'John Balsillie'; DX4WIN@mailman.qth.net
Subject: Re: [Dx4win] Print details on QSO labels

John,

When you use ADIF to DX4WIN utility, you import ADIF files (assuming you
know the call/operator) and can give it a group number. The result is a
DX4WIN file including group number. In your case you change the group nuber
per imported file. Later you merge all the DX4WIN files. This provides you
with a single file but with different group numbers. This is the way I
handle all my different operations.

Regards, Gerben - PG5M

-Original Message-
From: DX4WIN [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of John
Balsillie
Sent: Sunday, May 24, 2015 09:23
To: DX4WIN@mailman.qth.net
Subject: Re: [Dx4win] Print details on QSO labels

Hi Joe, funny I was going to mention start at 1 leaving 000 for All QSO but
didn't want to confuse the issue.

One small issue with DX4Win is you cant export/import the group name with
the ADIF, 1 of the calls I manage we have a QSL manager and he needs to
print the operator's call on the QSL card. Each operator's log I edit the
OPERATOR field to NOTES and delete all fields that populate the NOTES FOR
THIS QSO in Dx4win like STX, RX FREQUENCY. I now have just the operators
call in the notes field and when I export the combined logs to our manager I
just edit the export adif from NOTES back to OPERATOR.

Cheers
John ZL1ALZ

-Original Message-
From: DX4WIN [mailto:dx4win-boun...@mailman.qth.net]On Behalf Of Joe - OZ0J
Sent: Sunday, 24 May 2015 6:19 p.m.
To: DX4WIN@mailman.qth.net
Subject: Re: [Dx4win] Print details on QSO labels


Hi John

Thanks for the reply. It is working, but the group number must be different
from No 0. It took me some time to find that error.


Vy 73 de OZ0J / 5Q2T
 
Joe
 

 



-Oprindelig meddelelse-
Fra: DX4WIN [mailto:dx4win-boun...@mailman.qth.net] På vegne af John
Balsillie
Sendt: 23. maj 2015 10:31
Til: DX4WIN@mailman.qth.net
Emne: Re: [Dx4win] Print details on QSO labels

Hi Joe, one option is to give each operator a group number and the operators
call as the group name, add %% to the label greeting line including any text
you want printed under Preferences/Set-up Parameters/Lab Rep.  When you
print your labels check  print group names under Print QSL Labels.

To import your .adif set the DX4Win group number under Preferences/Set-up
Parameters/QSO for each operator log you import.

Cheers
John ZL1ALZ

-Original Message-
From: DX4WIN [mailto:dx4win-boun...@mailman.qth.net]On Behalf Of Joe - OZ0J
Sent: Saturday, 23 May 2015 5:15 p.m.
To: 'DX4WIN Reflector'
Subject: [Dx4win] Print details on QSO labels


Hi


In an ADIF file I have this information:

station_callsign:11OZ150ITU/12 operator:5OZ6YM

Is there any way, I can print out the station call sign and/or the operator
call sign?

I have 24 ADIF files where the station call sign and the operator are
different, and we want to use one QSL card design for all.


Vy 73 de OZ0J / 5Q2T
 
Joe
 
 



__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm

Re: [Dx4win] DX4WIN for Android

[Dan Violette]

Well it actually can with the interfaces.  http://pignology.net/ Dan, KI6X

 

From: Radivoj Kar, F6GNZ [mailto:f6...@yahoo.com] 
Sent: Wednesday, April 1, 2015 12:26 AM
To: Dan Violette; 'Paul van der Eijk'
Subject: Re: [Dx4win] DX4WIN for Android

 

Hi Dan,

Thanks for your message, but I also have the HamLog on my Android tab but it is 
just a replacement of the paper log: it can't read nor control TX 
frequencies/modes nor use spots to do it...

 

73, Radi

 

 

Le Mercredi 1 avril 2015 4h12, Dan Violette dank...@socal.rr.com 
mailto:dank...@socal.rr.com  a écrit :

 

Check HamLog by Pignology (99 cents US),  Android and iOS versions.  Very
easy to ask for updates to the software (have a few added).  I use it at the
club station on a iTouch at lunch operating and e-mail the new contacts as
ADIF to home PC once in a while and import.  I use ADIF to DX4WIN written
by  Jim first to add a group # for those QSOs that were made from a
different grid and use separate location file for LoTW upload.

Dan KI6X


-Original Message-
From: DX4WIN [mailto:dx4win-boun...@mailman.qth.net 
mailto:dx4win-boun...@mailman.qth.net ] On Behalf Of Radivoj
Kar, F6GNZ via DX4WIN
Sent: Tuesday, March 31, 2015 5:41 AM
To: Paul van der Eijk
Cc: DX4WIN Refelector
Subject: [Dx4win] DX4WIN for Android

Hi Paul,

As many of HAMS already have android based tabs/smartphones, it may be very
useful to consider porting some basic DX4WIN features (logging, spots, rig
control) into the Android OS environment. It would be great for portable
operations with small rigs like FT817. IC706 etc , thus avoiding to carry
the bulky PC (hated by XYL-s :) ! ).
Any thoughts on this?
73, Radi F6GNZ
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net mailto:DX4WIN@mailman.qth.net 

This list hosted by: http://www.qsl.net http://www.qsl.net/ 
Please help support this email list: http://www.qsl.net/donate.html

 

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] ADI Conversion Program

[Dan Violette]

Lee, I would use just Notepad as a text editor and Find/Replace the section
of say Mode:2CW to say Mode:3JT9 or whatever you are after.
Copy/Paste if only a few to do.  Missed what you were after changing.  Dan
KI6X

-Original Message-
From: DX4WIN [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of KY7M
Sent: Thursday, April 2, 2015 4:14 PM
To: dx4win@mailman.qth.net
Subject: [Dx4win] ADI Conversion Program

I need a recommendation on a program that will allow me to convert my adi
file for editing to correct the mode before it gets uploaded to LOTW.

 

Lee, KY7M

 

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Tuning indicator with MMTTY?

[Dan Violette]

Also, there is a preference to leave it always on top.  Dan KI6X

-Original Message-
From: DX4WIN [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of John Shaw
Sent: Wednesday, January 14, 2015 12:45 PM
To: DX4WIN@mailman.qth.net
Subject: Re: [Dx4win] Tuning indicator with MMTTY?

 Hi Eric,

Possibly nothing wrong but the MMTTY window with the tuning indicator you
are looking for has a tendency to get hidden.  Have a look in your tool bar
at the bottom of your screen and see if the MMTTY icon is there, click on it
this should bring the window to the top.  You will have to arrange your
windows so it is not covered.

73 John ZL1BYZ.

-Original Message-
From: DX4WIN [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of Eric
Rosenberg
Sent: Thursday, 15 January 2015 08:53
To: dx4win@mailman.qth.net
Subject: [Dx4win] Tuning indicator with MMTTY?

All I see when I bring up the RTTY window in DX4Win 8.05 is the text screen,
no tuning indicator.

Is this normal, or have I bdone something wrong?

73,
Eric E3DQ
__

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Labeling question

[Dan Violette]

As Kostas says.  I print directly by telling DX4WIN where to print the label
and have an HP paper size profile I choose when I go to print.  Can feed
from the front load feeder on an HP Color Laser CP2025.  Dan KI6X

-Original Message-
From: DX4WIN [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of Ricardo
Navarrete
Sent: Thursday, November 13, 2014 3:23 AM
To: DX4WIN Reflector
Subject: [Dx4win] Labeling question

Hello all,
I'm trying to print labels directly on the qsl card, I'm wondering what
paper size do I need to use. I made a good print but one by one because if I
put into the feed tray of the printer more than one only the first is
printed

Any idea

Thanks

Sent from my Samsung Galaxy III
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Issue saving Log in Windows 8.1

[Dan Violette]

And did he install in a folder on the root drive and not inprogram files?  
Win 7 and 8 hate updating in that folder without admin rights constantly being 
implemented.  / Dan KI6X

Sent from my iPad

 On Oct 21, 2014, at 5:56 PM, Art - W6KY via DX4WIN dx4win@mailman.qth.net 
 wrote:
 
 I would use the 'save as' command under file drop down menu.
 Then name the file with a call and save it in the 'save' directory
 in the DX4WIN directory...
 73 GL, Art  W6KY
 
 
 ..
 ...
 To paraphrase Ayn Rand, it is a short journey from a welfare state to a
 dictatorship.
 
 
 
 From: Isidro Acosta Hernández ea...@hotmail.com
 To: Dx4win Foro dx4win@mailman.qth.net
 Sent: Tuesday, October 21, 2014 5:15 PM
 Subject: [Dx4win] Issue saving Log in Windows 8.1
 
 
 Hello.  A friend of me has a problem:
 
 He is a registered user of DX4WIN and he has just installed it in a new
 computer.  Now, whenever he tries to save the log, in whatever folder, he
 get the following message:
 
 An exception occurred!
 Unable to create directory
 
 He is not trying to create anything, but overwriting the already existing
 .dxl file.
 
 Here is a screenshot
 
 http://screencast.com/t/I1evi8aoqC4
 
 He has installed DX4WIN in root folder.  The machine is an AMD A10, with 8
 
 GB RAM and Windows 8.1
 
 What is wrong?
 
 Thanks beforehand...
 
 73 de Isidro, EA8NQ
 E-mail:  ea...@hotmail.com
 
 
 Visit the EA8NQ's web page (in Spanish):
 http://ea8nq.ure.es/
 
 
 __
 DX4WIN mailing list
 Home: http://mailman.qth.net/mailman/listinfo/dx4win
 Help: http://mailman.qth.net/mmfaq.htm
 Post: mailto:DX4WIN@mailman.qth.net
 
 This list hosted by: http://www.qsl.net
 Please help support this email list: http://www.qsl.net/donate.html
 __
 DX4WIN mailing list
 Home: http://mailman.qth.net/mailman/listinfo/dx4win
 Help: http://mailman.qth.net/mmfaq.htm
 Post: mailto:DX4WIN@mailman.qth.net
 
 This list hosted by: http://www.qsl.net
 Please help support this email list: http://www.qsl.net/donate.html
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] EDIT (ADD) list of DX Clusters?

[Dan Violette]

And if you use the updater, create a local.tcp file and those will always
show up at the top of the list.  They are included at the top when a new TCP
file is created.  Dan, KI6X

-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf Of Jim Reisert AD1C
Sent: Friday, February 07, 2014 7:01 AM
To: Luis Teixeira
Cc: DX4WIN Reflector
Subject: Re: [Dx4win] EDIT (ADD) list of DX Clusters?

On Fri, Feb 7, 2014 at 3:38 AM, Luis Teixeira CT4NH asked:

 Where is stored the list of DX Clusters and how can I edit it (add more DX
Clusters) ?

Hi Luis,

Which clusters do you want to add?  The DX4WIN Data Updater updates from
this list:

http://www.dxcluster.info/telnet/index.php

If there are nodes missing, please let me know so I can try to contact the
SYSOPs.

73 - Jim AD1C

--
Jim Reisert AD1C, jjreis...@alum.mit.edu, http://www.ad1c.us
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] LOTW

[Dan Violette]

Dave,

My LOTW ADIF exports from DX4WIN can list  MODE:4RTTY and they are
accepted by LoTW and credited as data just fine.  The other modes are
special.  I forget which way PSK/PSK31 needs to be.  That was an earlier
discussion.  Not sure about others, but I have submitted a couple weird
modes too. 

Dan KI6X

-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf Of Dave Cossar
Sent: Saturday, February 01, 2014 9:05 AM
To: dx4win@mailman.qth.net
Subject: [Dx4win] LOTW

HI Guys.
I notice that when LOTW is being uploaded it will not accept RTTY  or any
other mode but SSB CW  and Data  but there is no Data mode in the Mode
window  so how is this done?
DaveGM3WIL

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Notes for this QSO

[Dan Violette]

And Jim's adif2dxq program will convert ADIF from really any contest and
allow you to assign a group and notes during the convert.  Then DX4WIN does
not need any changes to import with everything you want.  Dan KI6X

-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf Of Garry Shapiro
Sent: Tuesday, January 28, 2014 7:24 AM
To: Paul van der Eijk
Cc: DX4WIN Reflector
Subject: Re: [Dx4win] Notes for this QSO

Good guess, hi! The enable box was not checked but the annoying text was
there--right where I had put it. I don't believe I have used contest mode
more than once or twice and it had completely slipped my mind. But, then, a
lot of things do

I erased the text and will expect not to see it again.

Thanks, Paul.

Garry, NI6T

On 1/28/2014 6:33 AM, Paul van der Eijk wrote:
 Gary,

 QSO Window: QSO | Contest mode

 I'm guessing contest mode is still enabled

 --Paul, KK4HD


 On Mon, Jan 27, 2014 at 6:53 PM, Garry Shapiro ga...@ni6t.com 
 mailto:ga...@ni6t.com wrote:

 After the contest, I imported my contest log from CQWW CW into
 DX4WIN and annotated the QSO's with that identification in the
 Notes for this QSO field. Since then that phrase keeps popping up
 in that field---long after CQWW ended in November. It comes back
 like a bad penny, seemingly random, on most but not all new
 QSO's--how do I get rid of it?

 Garry, NI6T




 __
 DX4WIN mailing list
 Home: http://mailman.qth.net/mailman/listinfo/dx4win
 Help: http://mailman.qth.net/mmfaq.htm
 Post: mailto:DX4WIN@mailman.qth.net 
 mailto:DX4WIN@mailman.qth.net

 This list hosted by: http://www.qsl.net
 Please help support this email list: 
 http://www.qsl.net/donate.html




 --
 ~
 DX4WIN logging software
 Paul van der Eijk, KK4HD
 BrookHill Data Systems LLC
 http://www.dx4win.com


__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] DX4WIN

[Dan Violette]

Version has 60M.  Dan/KI6X

-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf Of Glenn Wyant
Sent: Thursday, January 23, 2014 3:33 PM
To: dx4win@mailman.qth.net
Subject: [Dx4win] DX4WIN

My version 6 DX4WIN does not have a slot for
60 meter qsos.

We now have those privilages here...

I assume newer versions of DX4WIN have it ??

Glenn VA3DX

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Feature request

[Dan Violette]

I use them both together, on the same audio feed, on another logging
software at our club station.  Work fine together on one audio line, each
decoding separately in separate windows, and one being the transmitter.  Dan
KI6X

-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf Of Joe Subich, W4TV
Sent: Tuesday, January 07, 2014 1:01 PM
To: dx4win@mailman.qth.net
Subject: Re: [Dx4win] Feature request


Actually, it would be extremely handy to have dual/dual receive - MMTTY and
2-Tone on each the left and right channels of the sound card to permit
listening in the pile-up on split DX.  It's not difficult to do a separate
instance of MMTTY for the sub RX/TX VFO but it should be equally easy to add
the ability to clone the basic RTTY receive Window.

73,

... Joe, W4TV


On 1/7/2014 1:07 PM, Jerry.Van wrote:

 Not sure this one has been requested recently.

 It would be nice to have 2Tone along with MMTTY fully integrated into 
 WIN. Only one, of course, being allowed to be active at a time.

 73,
 Jerry  N8BM


 __
 DX4WIN mailing list
 Home: http://mailman.qth.net/mailman/listinfo/dx4win
 Help: http://mailman.qth.net/mmfaq.htm
 Post: mailto:DX4WIN@mailman.qth.net

 This list hosted by: http://www.qsl.net Please help support this email 
 list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Update of QSL Manager database

[Dan Violette]

Joe,

Jim AD1C is the manager of that and many other lists (he does all the
callsign overrides for basically all contesting/logging programs).  Check
http://ad1c.com for DX4WIN info and the rest he assists with (on his own,
not with author's support but with their concurrence).  He got a Ham of The
Year award for all the great help he provides.  So, try Jim Reisert AD1C
jjreisert at alum dot mit dot edu.  Home I obscured that enough to not
cause robots to harvest his e-mail even though those are known words.  He
also probably will get it from your original e-mail since he is active here.

Dan KI6X

-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf Of Joergen Joe - OZ0J
Sent: Tuesday, November 12, 2013 11:39 AM
To: dx4win@mailman.qth.net
Subject: [Dx4win] Update of QSL Manager database

Hi

Who is responsible for update of the QSL Manager database in DX4WIN?

By a mistake I am mentioned as the QSL MGR for 5Q2J. I am not QSL MGR for
that call, only for 5Q2T.

The data is correct at QRZ.com and has been so at least for one year.

BTW QSL to 5Q2J goes to OZ2JBC.


Vy 73 de OZ0J / 5Q2T

Joe




__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Upgrading with existing license

[Dan Violette]

Checkout:

http://dx4win.ad1c.us/appnotes/upgrade.html

/Dan KI6X

-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf Of a...@aol.com
Sent: Thursday, November 07, 2013 8:52 PM
To: dx4win@mailman.qth.net
Subject: [Dx4win] Upgrading with existing license

Hi, All.
 
As AI6V's secretary, I downloaded DX4WIN 8.5 to upgrade from our older
version of 8.2.  I dropped our existing license into  the folder alongside
the .EXE file for the upgrade, but I don't know  how to get it recognized,
so we can activate the upgrade, and transfer  our logs and data from the
save 
folder in the older version to the new  one.   
 
Thanks for any help you can give us.
 
88  Sue  AI6YL
 
 
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] DXCC QSL Download - New?

[Dan Violette]

Checkout:

http://dx4win.ad1c.us/appnotes/lotw.html

/Dan KI6X

-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf Of John Shaw
Sent: Thursday, November 07, 2013 8:17 PM
To: dx4win@mailman.qth.net
Subject: Re: [Dx4win] DXCC QSL Download - New?

Well it would be very useful to me and I'm sure others as it would mean we
could use the submission tools within DX4WIN again as they are now useless
when submissions are initiated outside of DX4WIN it has no way of knowing
that they have happened so the data it has to work with is useless.  This
new file has the potential to fix that.
 
73 John ZL1BYZ.

  _  

From: Rick Murphy [mailto:k1mu.nos...@gmail.com]
Sent: Friday, 8 November 2013 16:33
To: John Shaw
Subject: Re: [Dx4win] DXCC QSL Download - New?


On Thu, Nov 7, 2013 at 10:10 PM, John Shaw jns...@compassnet.co.nz wrote:


 No one has commented on this yet.



There's not much to say. 
ARRL added this to allow loggers to download the specific QSOs that were
used to award DXCC credits.
This will eventually become complete as us folks with old credits pass on  -
I have several DXCC credits from card submissions for mixed DXCC that have
no information other than the fact that I have a QSO with that entity.. this
is clearly not very useful for matching my log.
 

I have looked at the ADIF file and it would be fantastic to be able to use
this file to set the DXCC award flags in DX4WIN.  Since most of my DXCC
submissions have been done using LoTW I am unable to easily and accurately
educate my DX4WIN log of QSO's DXCC award status, this would be the missing
link.



That's the reason ARRL added it, to allow data in your DXCC record, when
it's available, to be queried.
It's good to be able to tell which one of the dozens of QSOs with a common
DXCC entity that ARRL used in your DXCC record.
73,
-Rick

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] FW: Printing Labels showing frequency

[Dan Violette]

Alan,

I don't think you can.  The exact frequency ends up in the notes field if
you added the $$ (so probably cannot be put on a label).  There is the
setting in the QSO preference for MHZ instead of Band, but without trying, I
think it will just put 14 MHz instead of 20m and not the exact frequency if
it even does that on a label.

Dan KI6X

-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf Of ALAN ZACK
Sent: Friday, October 11, 2013 11:03 AM
To: DX4WIN Group
Subject: [Dx4win] FW: Printing Labels showing frequency

I posted this a month ago but no one replied. Anyone have any suggestions
please?

Subject: [Dx4win] Printing Labels showing frequency

I've been poking around various HELP topics but can't find an answer to
this.
I presently have my labels set up with small windows showing the following
QSO info:

DATE   UTC   BAND   RST   2X

When I print the labels this info is filled in. Example:

 DATE UTC   BAND  RST   2X

15-SEP-2013   2156  14 MHZ 599   CW
 
Rather than just showing the band (14 MHZ) is there a way to show the exact
freq logged (14012.0)?

My contest loggers always show the exact freq I worked a station (ex:
14012.0) rather than just 14.000 or 14 MHZ. When I transfer my contest logs
(via ADIF) into DX4WIN the exact freq appears in my FREQ (KHZ) little box in
the main logging window after the download. I am now in the habit when I log
a regular every day QSO I fill in the exact freq in this same window. But
when I print the labels it will just print 14 MHZ.
 
TIA  73

Alan, K7ACZ

 

 


__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] (no subject) VFO A/B Flash

[Dan Violette]

I think this is an ICOM software (CI-V?) issue.  DXlab does it to an IC756
also at the club station.  I have never had it happen with my Kenwood.
Seems to be a command that connects the ICOM radio to the software causes
things to switch to the sub-VFO for a couple seconds and then back.  With a
SteppIR hooked up and the alternate VFO on a different freq/band, the
controller starts changing the antenna and then reverses and changes back
when main VFO comes back.

Dan KI6X

-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf Of Marcel ON6UQ
Sent: Wednesday, September 11, 2013 1:16 AM
To: DX4WIN@mailman.qth.net
Subject: [Dx4win] (no subject)


Hello all, 


Hello all, 

Have recently installed a IC7600 and a connection established between the
TRX and the laptop with XP via USB ports. 

Both DX4WIN as N1MM works ok . 
When I start DX4WIN , then flashes the VFO frequency readouts of both of VFO
A and B . 
Does anyone have any idea what the reason of this is and what to do? 


In the DX4WIN window 'Freq (khz)' no readout, only a few seconds by pressing
F9 and than disappear. 

Thanks in advance 
MarCEL ON6UQ 

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] (no subject)

[Dan Violette]

You did make sure you ran the program as Administrator one time to allow
installation?  Win 7/8 prevent some things from happening automatically
unless you tell it to.  Dan KI6X

-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf Of Mark Nace
Sent: Friday, August 23, 2013 3:47 PM
To: dx4win@mailman.qth.net
Subject: [Dx4win] (no subject)

I have version 7.07.02 .  I switched to a new computer running windows 8. 
After I got the com ports set up for the radio and RTTY, I still get a
driver error, but DX4WIN does run, and seems to work.  Any hints on best
ways to do this switchover, and things to look out for? Thanks and 73 Mark
N5KAE __
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Cabrillo file

[Dan Violette]

Nope, will not.  Not a contesting program per the author (other than the
minor ability it has).  Cabrillo needs special headers and format for each
contest so would be too much worth anyway.  Contest in another program (e.g,
N1MM) and export ADIF from that and import into DX4WIN.  You can output in
ADIF and then convert to Cabrillo (I think) in some software.  You enter all
the header info when asked and it creates.  Also, WA7BNM's site has a
Cabrillo generator that does similar and you paste in your log (or type in
your log) for small ones.  I can look up more info if you do not find
yourself or get in many replies.

Dan KI6X

-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf Of George
Sent: Monday, June 24, 2013 4:53 PM
To: dx4win@mailman.qth.net
Subject: [Dx4win] Cabrillo file

Will DX4WIN export a log file in Cabrillo format? If so I haven't found out
how to do it.
I see in the export window there is a myriad of export file types but no
Cabrillo.
Any help would be appreciated.

George  W2YJ
Sent from my Windows 8 Desktop



__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] LoTW problem v 1.14.1

[Dan Violette]

Should not be an issue with dupes anymore.  What I have seen people talk
about is when there is a problem, it could think the file when resent is
dupes.  Just say send anyway and you are back in sync.  Should not need it
marked anymore and then will properly prevent you from sending a file twice
by mistake.

Dan KI6X

-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf Of Dick White
Sent: Monday, June 03, 2013 8:54 AM
To: white...@sbcglobal.net; 'Wayne M'; dx4win@mailman.qth.net
Subject: Re: [Dx4win] LoTW problem v 1.14.1

First of all want to thank all of you who have sent me help information
about my LoTW up load problem.  I finally got the file up loaded and
confirmed. 
 I went through the process for a third time this morning and it worked.
During the process there is a file that asks if you want to allow dupes. I
checked my file and there were no dupes so I selected NO. This time I
selected ALLOW DUPES and the file was up loaded and a window came up that
said the file was received by LoTW and credit for the 14 calls I sent.  I
don't know why that made a difference, but it worked.  I am sure there were
no dups in the file, but LoTW thought there was.  Thanks again for all the
help. I just hope it works next time I up load.
73  DICK  -  KS0M

Lord help me to be the person my dog thinks I am
Richard C. (Dick) White
Fulton, MO. 65251  U.S.A.
Amateur Radio Station  KS0M

-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf Of Dick White
Sent: Monday, June 03, 2013 9:39 AM
To: 'Wayne M'; dx4win@mailman.qth.net
Subject: Re: [Dx4win] LoTW problem v 1.14.1

Several of you have said that LoTW will not accept a ADIF file and needs a
tq8 file. In the HELP file it states that LoTW will accept a ADIF and
CABRILLO file. I did not find any prompt about a tq8 file and figured it was
not needed in v1.14.1. 
I checked my ADIF file and it has the calls to up load correct.  The ADIF
file is located in C:\LoTW as ks0m149.ADI.  That is the file I selected for
the TQSL to sign and upload. It did not do that.  I tried to attach the
file to email and LoTW cannot find the attachment in the ADIF format.
I have tried twice this morning to up load the file with no success.  If
this version needs a tq8 file how do I make one ?  
My CERT is active and my profile info is correct. I am at a loss as to what
to do next.
KS0M  Dick

Lord help me to be the person my dog thinks I am
Richard C. (Dick) White
Fulton, MO. 65251  U.S.A.
Amateur Radio Station  KS0M


-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf Of Wayne M
Sent: Sunday, June 02, 2013 9:59 PM
To: dx4win@mailman.qth.net
Subject: Re: [Dx4win] LoTW problem v 1.14.1

Hi Dick,
I have no idea why TQSL did not automatically send the file but you can only
upload a TQ8 file not an adi file to LOTW.

When I updated my TQSL program I just started the new downloaded file and it
removed the earlier version, kept all my certs, and was ready to go and it
did work fine here.

73

Wayne  WA1PMA

On 6/2/2013 7:22 PM, Dick White wrote:
 First time to try LoTW TQSL v. 1.14.1 I have tried two times to up 
 load a file to LoTW. I get the following message Your message did not 
 appear to have a TrustedQSL file attached to it. DX4WIN is latest 
 8.xxx version. Both mail show the LoTW file attached.

   

 Here is what I did.

 In DX4WIN made a ADIF file (ks0m149).ADI and saved it in my C:\LoTW 
 file
.

   


 Opened TQSL - File - Select file to sign and upload ADIF or CABRILLO
file.

 Selected the ks0m149.ADI file in C:\LoTW

 The file (C:\lotw\ks0m149.ADI) will be signed and up loaded using  Station
 loc = Fulton  Call=ks0m,   DXCC= USA Is that correct - yes.

   

 I thought then the file was automatically up loaded. It apparently was 
 not sent.

   

 I then opened a e-mail addressed to LoTW  and attached  ks0m149.ADI  
 (in my C:\LoTW file) and sent to ARRL LoTW as usually done.

 Did this twice and both were rejected.

 What did I miss or doing wrong?

   

 DICK   -  KS0M

   

 Lord help me to be the person my dog thinks I am

 Richard C. (Dick) White

 Fulton, MO. 65251  U.S.A.

 Amateur Radio Station  KS0M

   

 __
 DX4WIN mailing list
 Home: http://mailman.qth.net/mailman/listinfo/dx4win
 Help: http://mailman.qth.net/mmfaq.htm
 Post: mailto:DX4WIN@mailman.qth.net

 This list hosted by: http://www.qsl.net Please help support this email
 list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] TQSL 1.14.1

[Dan Violette]

At a minimum it makes the signing and upload as one step (same as just
signing in 1.13).  No more going to ARRL site to upload (or email).  Dan
KI6X

-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf Of Art - W6KY
Sent: Sunday, June 02, 2013 3:46 PM
To: dx4win@mailman.qth.net
Subject: Re: [Dx4win] TQSL 1.14.1

The version of TQSL I am using works great. I have used it for years. So,
until it stops working, I will stick with it. Can't really figure what
features 1.14.1 must have over the old version that uploads my TQSL files
lightning fast
The speed with which the ARRL irons out problems with LOTW, maybe I'll try
it in 2015... :)  It took them years to figure out LOTW was 'slow'
(understatement)...


73, Art  W6KY

 
.
I Am A Self Made Man.
I Started Out With Nothing,
and I Have Most of it Left.



 From: William Osborne wosborn...@gmail.com
To: dx4win@mailman.qth.net
Sent: Sunday, June 2, 2013 10:01 AM
Subject: [Dx4win] TQSL 1.14.1
 

I downloaded this and installed it; uninstalling the old one automatically.
I then tried to set a batch of calls to LotW using the DX4WIN tab. It said
no certificate. So I used TQSLcert to try and load the certificate (.tq6)
that was in the save folder and it says I cannot as there is no key
available.  Is there a fix for this?



Thanks,

William Osborne, K5ZQ

wosborn...@gmail.com mailto:wosborn...@gmail.com 

207-205-9565



__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] DX Spots in color

[Dan Violette]

Also make sure you have 6M checked for showing in Preferences / Station.
Dan KI6X

-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf Of Pat Rose
Sent: Sunday, March 24, 2013 3:37 PM
To: dx4win@mailman.qth.net
Subject: [Dx4win] DX Spots in color

Most of my needed DX show up in red, however lately I have found a couple of
needed do not.  They are C5 and TK needed on 6 meters.  How can I fix this ?
Thanks,  Pat W5OZI
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Log for New Callsign

[Dan Violette]

Also strongly recommend the new Group # for these QSOs.  Did that for a
portable operation for me and helps more than once.  Dan KI6X

-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf Of Jim Reisert AD1C
Sent: Sunday, March 24, 2013 4:09 PM
To: Fred - NA2U
Cc: DX4WIN Reflector
Subject: Re: [Dx4win] Log for New Callsign

On Sun, Mar 24, 2013 at 4:38 PM, Fred - NA2U cw...@juno.com wrote:

 Ok, here's the deal.  I worked the BARTG contest last weekend.  Rules
stated I had to sign NA2U/7.  Today I uploaded my log to LOTW.  No QSLs
yet.  Very strange.  I usually get many RTTY QSLs immediately upon
uploading.  So, I realize that I had to sign /7 in the contest.  I created a
new LOTW certificate for NA2U/7 and I'm waiting for it to arrive.  BUT, now
I realize that the Qs I uploaded from DX4WIN (probably) show NA2U.

 Now I'm wondering if I have to create a separate log for these Qs for
uploading to LOTW.  The ADIF file I imported/uploaded must have been for /7.

 I always suspect pilot error.  Am I missing anything here?   What other
steps, if any, do I need to take?

Fred, there's no need to make a separate log.  Just do an ADIF export of
your current log, filtering (F8) on the contest date(s) as well as the mode
(RTTY?) and/or group number.  Then you can sign just those QSOs with the
NA2U/7 certificate and upload them.

- Jim

--
Jim Reisert AD1C, jjreis...@alum.mit.edu, http://www.ad1c.us
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] LogWindows Import?

[Dan Violette]

If you can export to ADIF from LogWindows it is an easy import.  Jim (AD1C)
can usually look at the format (from a file or sample file) and write a
converter (if he has not already done one).  Give it a day or two and I
would expect he would reply with some good idea.  Dan KI6X

-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf Of Charlie Cunningham
Sent: Sunday, March 17, 2013 10:43 AM
To: dx4win@mailman.qth.net
Subject: [Dx4win] LogWindows Import?

LogWindows?

Anyone know how to import old (original) Logwindows logs into DX4Win?

Thanks!!

Charlie, K4OTV


__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] DX4win Label printing

[Dan Violette]

Doyle (and DX4WIN list),

Yes, those are the labels I use.  You can even specify where the first label
is (skip blanks) if you have used some and there are more on the sheet.
Last purchase of cards (I had them printed/cut at office store) I left 3 of
4 on each sheet with a blank space instead of an information box.  I can
stick the label there and nothing to show through.  I actually set up the
laser printer to print directly on the cards which I can do now instead of
labels.

Dan KI6X

-Original Message-
From: Doyle [mailto:n...@comcast.net] 
Sent: Friday, March 01, 2013 7:08 PM
To: Dan Violette
Subject: Re: [Dx4win] DX4win Label printing

Hi Dan,

Thanks for the response, I have a Brother laser printer  will try
printing the Avery 5160 labels on it.

Received several messages from other folks  all use the Avery or
equivalent labels.

Will take a look at GlobalQSL.com.

Thanks again,

Doyle/N4VV

- Original Message -
From: Dan Violette dank...@socal.rr.com
To: 'Doyle' n...@comcast.net; 'DX4WIN Reflector' 
dx4win@mailman.qth.net
Sent: Friday, March 01, 2013 10:02 PM
Subject: RE: [Dx4win] DX4win Label printing


Laser printer on sheets of labels.  Though, after all the effort of the last
buro shipment a while back, I moved to GlobalQSL.com  /Dan KI6X

-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf Of Doyle
Sent: Friday, March 01, 2013 1:30 PM
To: DX4WIN Reflector
Subject: [Dx4win] DX4win Label printing

GE,

I need to print labels for a bunch of bureau cards.  I use to print them
using W98  an old dot matrix printer.

Wonder what other people are using to print labels.  Laser printer,
label printers or what.

Please respond off-line to:  n...@comcast.net

Many thanks,

Doyle/N4VV
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] DX4win Label printing

[Dan Violette]

Laser printer on sheets of labels.  Though, after all the effort of the last
buro shipment a while back, I moved to GlobalQSL.com  /Dan KI6X

-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf Of Doyle
Sent: Friday, March 01, 2013 1:30 PM
To: DX4WIN Reflector
Subject: [Dx4win] DX4win Label printing

GE,

I need to print labels for a bunch of bureau cards.  I use to print them
using W98  an old dot matrix printer.

Wonder what other people are using to print labels.  Laser printer,
label printers or what.

Please respond off-line to:  n...@comcast.net

Many thanks,

Doyle/N4VV
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Spots versus Confirmed

[Dan Violette]

Guess the first question is: Are they marked confirmed in DX4WIN for LoTW
(versus just in LoTW)?  Dan KI6X

-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf Of Hugh Phillips K7XM
Sent: Tuesday, February 26, 2013 4:25 PM
To: DX4WIN@mailman.qth.net
Subject: [Dx4win] Spots versus Confirmed

I have countries confirmed via LoTW, yet they are still showing up in the
Spot window as needed.
Specifically on 30m CW.
Why are these still showing up in the spot window as needed when they are
confirmed?
Thanks,
Hugh
K7XM

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Logbook/Group Numbers and End Dates

[Dan Violette]

Groups can be any date since you specify each QSO to a certain group #.
If you want to view (filter) only a certain group # then you go in to:

Filter and Search by group number

OR if you want a selection instead:

Filter
Selection
Under Current Selection if you have already created the other selections
you will see the date range (leave the end blank for no end date)
If you do not have a selection yet, choose ADD, Rename + Set date range +
Double click the group # you want in the selection (can choose more than
one, but you appear to want only one)

Try that.  Dan KI6X

-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf Of Fred - NA2U
Sent: Friday, February 22, 2013 9:10 PM
To: dx4win@mailman.qth.net
Subject: [Dx4win] Logbook/Group Numbers and End Dates

I don't know what happened.  I have three different groups.  Group Zero is
All QSOs.  The begin/end dates are OK.  Group One is all QSOs since
11/29/2009, aka Arizona QSOs.  For reasons unknown, the end date of Group
One is now 01/01/2013 and I don't seem to be able to change it.  I want to
make it 01/01/2099 but I can't seem to get the end date to save.  The third
group is a subset of Group One is 2012 ARRL DX Phone.  Its dates are OK.

I know it's probably a simple step but what to do to set the end date of
Arizona QSOs, please?
 
73 from the desert and thanks,
 
Fred/NA2U
Wretched excess is just barely enough.

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] operating CW from keyboard and keyer without unplugging

[Dan Violette]

Bingo.  Correct mono 1/4 splitter.  As noted, there is the modification to
split the keyer/manual line and there is a connector available already too
but what you said will work great.

Dan

P.S. I prefer the parallel port keying, but really not much difference other
than the serial is used by other things (PTT, FSK, etc.) in my station.

-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf Of Ed Douglass
Sent: Wednesday, January 09, 2013 8:01 PM
To: dx4win@mailman.qth.net
Subject: Re: [Dx4win] operating CW from keyboard and keyer without
unplugging

Barry, Dave, Dan,

Thanks for your encouragement and advice. It looks like it is going to work.

Here is a little background information for those who might be interested.

The switch on the back of the TS-850 near the key jack is set to manual so
as not to use the internal keyer. The keying voltage of the TS-850 is 5
volts at about 1 mA. It has a positive keying line.

I''ve got a Y connector. The plug that goes into the jack on the TS-850 is
wired correctly (it makes a difference if the 1/4 plug is mono or stereo).
The line from the serial port of the computer will plug into one branch of
the Y and the line from the keyer to the other branch.

The Heathkit Model SA-5010 microMatic Memory Keyer dates from 1982. The
keyer output is rated at +250 volts @ 100 mA (or -200 volts @ 40 mA) so it
can be used for either positive or negative keying lines. It uses transistor
switching, not a relay, but at these ratings I think there should be little
strain on the transistors. I believe the keyer was designed to be used on
transceivers with tubes.

My next step is to build or buy a serial cable. There are plenty of diagrams
for building one of these.  Got to look in my parts boxes.

73 de Ed, AA9OZ


-Original Message-
From: Dan Violette [dank...@socal.rr.com]
Date: 01/09/2013 09:29 PM
To: 'Ed Douglass' aa...@doorpi.net;, dx4win@mailman.qth.net
Subject: RE: [Dx4win] operating CW from keyboard and keyer without
unplugging

As others said, yes should work. Make sure the small switch on the back of
the TS-850 is on manual keying (not using internal keyer). Since you are
using basically 2 external keyers (on/off keying of the line), either keying
will key the radio.

Dan KI6X

-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf Of Ed Douglass
Sent: Wednesday, January 09, 2013 8:16 AM
To: dx4win@mailman.qth.net
Subject: [Dx4win] operating CW from keyboard and keyer without unplugging

A question for Jim Reisert:

Using DX4WIN, is it possible to operate CW from a keyboard with a serial
port connection between the computer and the transceiver and then parallel
the output of a keyer (Heathkit uMatic Keyer) with the cable from the serial
port in the plug that goes into the CW jack on a Kenwood TS--850?

What I am trying to accomplish is to be able to operate CW from a keyboard
OR a paddle/keyer without having to unplug one and plug in the other.

Thanks for your advice.

73 de Ed, AA9OZ

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html


__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] operating CW from keyboard and keyer without unplugging

[Dan Violette]

As others said, yes should work.  Make sure the small switch on the back of
the TS-850 is on manual keying (not using internal keyer).  Since you are
using basically 2 external keyers (on/off keying of the line), either keying
will key the radio.

Dan KI6X

-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf Of Ed Douglass
Sent: Wednesday, January 09, 2013 8:16 AM
To: dx4win@mailman.qth.net
Subject: [Dx4win] operating CW from keyboard and keyer without unplugging

A question for Jim Reisert:

Using DX4WIN, is it possible to operate CW from a keyboard with a serial
port connection between the computer and the transceiver and then parallel
the output of a keyer (Heathkit uMatic Keyer) with the cable from the serial
port in the plug that goes into the CW jack on a Kenwood TS--850?  

What I am trying to accomplish is to be able to operate CW from a keyboard
OR a paddle/keyer without having to unplug one and plug in the other.

Thanks for your advice.

73 de Ed, AA9OZ

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] LoTW Upload

[Dan Violette]

It shows an upload date which corresponds to when it is processed not first
uploaded despite the wording.  I verified this with my last upload actual
date/time versus when new QSL matches hit..  Dan KI6X

-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf Of Jesse Wall
Sent: Sunday, December 09, 2012 4:57 AM
To: dx4win@mailman.qth.net
Subject: [Dx4win] LoTW Upload


Hugh,
After you do an upload, go to Find Call and search your call? This option
says it is the callsign's last upload. I haven't tested this myself. I'm
waiting until the backlog clears before I do an upload again.

73 and Merry Christmas to all,
Jesse, KA8YYZ
--- dx4win-requ...@mailman.qth.net wrote:

From: dx4win-requ...@mailman.qth.net
To: dx4win@mailman.qth.net
Subject: DX4WIN Digest, Vol 104, Issue 11
Date: Sat, 08 Dec 2012 12:00:02 -0500

Send DX4WIN mailing list submissions to
dx4win@mailman.qth.net

To subscribe or unsubscribe via the World Wide Web, visit
http://mailman.qth.net/mailman/listinfo/dx4win
or, via email, send a message with subject or body 'help' to
dx4win-requ...@mailman.qth.net

You can reach the person managing the list at
dx4win-ow...@mailman.qth.net

When replying, please edit your Subject line so it is more specific than
Re: Contents of DX4WIN digest...


Today's Topics:

   1. Re: LoTW file upload (ON4AOI)
   2. Re: How to find what new countries I worked (David Kozinn, K2DBK)


--

Message: 1
Date: Sat, 8 Dec 2012 10:25:58 +0100
From: ON4AOI on4...@skynet.be
To: 'Hugh Phillips K7XM' jacsh...@mho.com
Cc: DX4WIN@mailman.qth.net
Subject: Re: [Dx4win] LoTW file upload
Message-ID: 002401cdd526$084d4e50$18e7eaf0$@be
Content-Type: text/plain;   charset=us-ascii

Hugh
It only shows up when you have uploaded those files.
No trace afterwards, if b4 28/11/2012 you probably need to upload Again due
the BUG they fixed late evening on 28 November


Guy ON4AOI

-Oorspronkelijk bericht-
Van: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
Namens Hugh Phillips K7XM
Verzonden: zaterdag 8 december 2012 1:56
Aan: DX4WIN@mailman.qth.net
Onderwerp: [Dx4win] LoTW file upload

I have uploaded two TQ8 files to LoTW recently.
Shouldn't those show up somewhere even though they have not been processed
by LoTW ?
I can't seem to find them, unless I'm not looking in the right place
Using Dx4Win v8.05...

73
Hugh
K7XM

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html



--

Message: 2
Date: Sat, 08 Dec 2012 11:44:57 -0500
From: David Kozinn, K2DBK k2...@arrl.net
To: Jim Reisert AD1C jjreis...@alum.mit.edu
Cc: DX4WIN Reflector dx4win@mailman.qth.net
Subject: Re: [Dx4win] How to find what new countries I worked
Message-ID: 50c36e89.7040...@arrl.net
Content-Type: text/plain; charset=ISO-8859-1; format=flowed

Well for me, the clublog feature was exactly what I wanted in this case, but
I can see where there might be other variations as well. None of the
examples that I can think of (including the one I started this thread
with) are must have things, but rather fall into the category of
interesting things you can find out.

On 12/7/2012 8:08 PM, Jim Reisert AD1C wrote:
 On Tue, Dec 4, 2012 at 8:10 PM, David Kozinn, K2DBK k2...@arrl.net
wrote:

 Actually, that is  the perfect solution, and one I'd forgotten about. 
 (I've been a member of Club Log for a long, long time.) That actually 
 gives me the exact information that I was looking for. Thanks for
mentioning it.
 This works for all-time new ones, but not, for example, if I want to 
 see if I worked any new countries during CQWW CW for the CQ DX 
 Marathon in 2012. A while back, I wrote a quick-and-dirty program to 
 display the first time a new country was worked, given an ADIF file as 
 input.  It was never meant for release, but I could add filtering to 
 it.  That way you could export whatever portion of your log you cared 
 about (to ADIF) and run the report against that.

 But it would be better if Paul could build this into the program.  If 
 I recall, KD7P/N7XR's logging program (whose name escapes me at the
 moment) was able to do this, back in the mid-1990's!

 - Jim

 --
 Jim Reisert AD1C, jjreis...@alum.mit.edu, http://www.ad1c.us


--
73,
David, K2DBK
http://k2dbk.blogspot.com
http://k2dbk.com
twitter: @k2dbk



--

___
DX4WIN mailing list
DX4WIN@mailman.qth.net
http://mailman.qth.net/mailman/listinfo/dx4win


End of DX4WIN Digest, Vol 104, Issue 11
***