I just recently performed the modification to my Yeasu FT 920 to operate on
60m. All things seemed to be working just fine until I ran DX4WIN. Here
is the problem I face. I find a 17m CW spot. I click on the spot and the
radio responds, correct band/mode changes however the mode and band on
Greetings all and Happy Holidays;
I've been spending some quality time with my IC 706MKIIG since it is
the
only spare radio I have to use at my new station. I've investigated the
computer controlled interface I need to control the rig and found some
great resources on the internet
Yup... same here. Works like a champ.
Kurt - W2MW
-Original Message-
From: WL7M [SMTP:[EMAIL PROTECTED]
Sent: Tuesday, December 03, 2002 5:42 PM
To: [EMAIL PROTECTED]; dx4win@mailman.qth.net
Subject:Re: [Dx4win] CW keyboard question
I run the CW window using V5.03 and
Greetings all;
I'm not sure if it is me or what, but here is what I've found. I have
my
computer interfaced to a Yaesu FT-920. If I double-click on a spot that is
working split, I noticed that the mode on VFO-B doesn't get properly set.
VFO-A has no problem. Is this an oversight in
I just want to thank everyone for their responses. I will have to pay
closer attention to what the problem is. I know it doesn't happen all of
the time. But when I can figure out what set of conditions causes it, I'll
let everyone know.
Best of 73 and for those state-side hams Have a
If the 1000mp is anything like the FT920, you may have your cake and eat it
too I use CW keying from DX4WIN and my paddle. I have connected the
paddle on the front panel and my computer keying cable in the back of the
rig. I have a switch on the back of the rig that disables the Keyer for
Larry;
That is exactly what I need to do. I sent out a bunch of QSLs to state
side managers and wanted to see what didn't come back yet. Now these went
out with w/ SASEs with the lesser postage because they went out at the
beginning of the year. I want to get some idea how many are
If you check the on-line help for that error, I think you will find it
documented and how to correct it.
73;
Kurt - W2MW
-Original Message-
From: STU [SMTP:[EMAIL PROTECTED]
Sent: Friday, August 16, 2002 11:49 PM
To: DX4WIN POSTINGS
Subject:[Dx4win] Problems with XP
I checked my Yaesu FT-920 for CW CW-R and DX4WIN behaves normally. It
reads either CW mode as CW. I'm running the same version of DX4WIN.
73;
Kurt - W2MW
-Original Message-
From: Larry Benko [SMTP:[EMAIL PROTECTED]
Sent: Tuesday, August 13, 2002 2:13 PM
To:
What is your User Level set to? Try Expert
-Original Message-
From: W2AGN [SMTP:[EMAIL PROTECTED]
Sent: Wednesday, August 07, 2002 9:42 AM
To: dx4win@mailman.qth.net
Subject:[Dx4win] Group Names
I am trying to add a name to a numbered group. When I go to QSOFILTER
both
Just an FYI folks.. First I want to say thanks for all of those who
provided me comments on CW keying. After spending a bit of time with
things I decided to use the LPT port instead of the serial port. After a
few bucks worth of parts I am a happy CW operator.
One nit that I found. I found
Actually DOS is not really gone. One has to understand the architecture
of XP, Win2K as well as WinNT4. They are much the same. DOS as well as
the 16 bit runtime run as sub-systems. This has been true with XP and
its predecessors. Chances are that DOS will never go away because there
are
I was going to make this suggestion next. This does work. I set my email
polling time to 3 min. I can stay connected for hours/days.
73;
Kurt - W2MW
-Original Message-
From: EdKathyStratton [SMTP:[EMAIL PROTECTED]
Sent: Thursday, July 18, 2002 9:54 PM
To: Garry Shapiro;
If you read the RFP on DHCP, you will find that as long as the IP is active
that it will get renewed during its half-life of the lease. So if you have
an expiration of 2 hours, your IP will be renewed every hour.
-Original Message-
From: Pete Smith [SMTP:[EMAIL PROTECTED]
Sent:
Not really knowing much about the Linksys router, I would seem to think
that you are experiencing a time out instead of loosing track of the telnet
session. You should have some user-definable parameters in any router to
allow you to change and/or configure timeouts.
I would not give up all
Greetings all;
I have been using DX4WIN v. 5.03 for quite some time on my COMPAQ
Armada
7800, 128m ram, 333mhz processor. I just recently started using the PSK31
feature in DX4WIN. I have had a problem where by the PSK31 display would
freeze up when trying to transmit. The odd thing
I can only answer number 2. I use an HP Laser Jet 6L with very good
results. I use the 8160 labels which measure 1 x 2 5/8. You get 30
labels per page.
Good luck.
Kurt - W2MW
-Original Message-
From: Eric Wilson [SMTP:[EMAIL PROTECTED]
Sent: Wednesday, May 22, 2002 1:13 PM
To:
17 matches
Mail list logo