Re: [Dx4win] Help With Importing WSJT .adi
I run WSJT-X on two different computers within my station. Both PCs are networked. To make it easy to find the log files, I have mapped network drives to each wsjt-x folder on the separate computers. When I go to import either one of the files from within DX4WIN, I go to File, Import, ADIF, and then select This PC. Under Network locations, both WSJT-X folders (on two different PCs) are displayed. Clicking on one or the other displays the wsjt-x_log.adi file that I need for importing into DX4WIN. This approach makes it very easy to find the right file on either computer. It would also work with only one computer. Just map a drive to the file location that Jim described below. Importing from WSJT-X becomes a snap! 73, Dave, N4QS -Original Message- From: dx4win-boun...@mailman.qth.net On Behalf Of Jim Reisert AD1C Sent: Thursday, November 8, 2018 1:50 PM To: g...@npgcable.com Cc: DX4WIN Reflector Subject: Re: [Dx4win] Help With Importing WSJT .adi On Thu, Nov 8, 2018 at 10:34 AM Jerry France wrote: > For some reason I am unable to see changes made to the DXWIN log after > I import the WSJT .adi file into the logger. I just made a WSJT qso, > logged it into the WSJT log, and it shows up in the log.adi file. I > then imported it into the logger, but the QSO doesn't show up in the > log. In fact after doing the "Import" it appears like nothing new was > added when I looked at the pop up screen showing the results of the import. It sounds like you are importing the wrong file. The ADIF log file that WSJT-X creates can be found here: %localappdata%\WSJT-X\wsjtx_log.adi This is the file you need to import into DX4WIN. -- Jim Reisert AD1C, , http://www.ad1c.us __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net Message delivered to n...@vci.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net Message delivered to arch...@mail-archive.com This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] Help With Importing WSJT .adi
On Thu, Nov 8, 2018 at 10:34 AM Jerry France wrote: > For some reason I am unable to see changes made to the DXWIN log after I > import the WSJT .adi file into the logger. I just made a WSJT qso, > logged it into the WSJT log, and it shows up in the log.adi file. I > then imported it into the logger, but the QSO doesn't show up in the > log. In fact after doing the "Import" it appears like nothing new was > added when I looked at the pop up screen showing the results of the import. It sounds like you are importing the wrong file. The ADIF log file that WSJT-X creates can be found here: %localappdata%\WSJT-X\wsjtx_log.adi This is the file you need to import into DX4WIN. -- Jim Reisert AD1C, , http://www.ad1c.us __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net Message delivered to arch...@mail-archive.com This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] Help With Importing WSJT .adi
Jerry, This is what I do. (I have version 9.0.4.1176) --> File --> Import/Export --> ADIF --> File --> Import --> (Select your WSJT File, i.e. wsjtx_log) --> Open --> (Option for duplicate QSOs) Imported QSO is ignored --> OK --> (Import Results) OK New QSOs will be seen in Log 73/GL, Bob K8BL (7800 FT8 Q's so far in 2018!!) From: Jerry France To: DX4WIN Sent: Thursday, November 8, 2018 12:34 PM Subject: [Dx4win] Help With Importing WSJT .adi Hi All: For some reason I am unable to see changes made to the DXWIN log after I import the WSJT .adi file into the logger. I just made a WSJT qso, logged it into the WSJT log, and it shows up in the log.adi file. I then imported it into the logger, but the QSO doesn't show up in the log. In fact after doing the "Import" it appears like nothing new was added when I looked at the pop up screen showing the results of the import. I did import this .adi file a week or so and FT8 Q's showed up in the DX4WIN log windowhowever not all of themcouldn't find any VP/D Q's for FT8 (the other modes work there though). What am I doing wrong? Using version 9. Tnx for any assistance you can provide. I really don't want to enter all those FT8 Q's manually! JerryK7LY __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net Message delivered to arch...@mail-archive.com This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Dx4win] Help With Importing WSJT .adi
Hi All: For some reason I am unable to see changes made to the DXWIN log after I import the WSJT .adi file into the logger. I just made a WSJT qso, logged it into the WSJT log, and it shows up in the log.adi file. I then imported it into the logger, but the QSO doesn't show up in the log. In fact after doing the "Import" it appears like nothing new was added when I looked at the pop up screen showing the results of the import. I did import this .adi file a week or so and FT8 Q's showed up in the DX4WIN log windowhowever not all of themcouldn't find any VP/D Q's for FT8 (the other modes work there though). What am I doing wrong? Using version 9. Tnx for any assistance you can provide. I really don't want to enter all those FT8 Q's manually! JerryK7LY __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net Message delivered to arch...@mail-archive.com This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
