Re: [Dx4win] I don't see DX4WIN reading the freq of my 7300

2019-04-19 Thread Randy Farmer 
Be sure you have the program in "Add Real-time" mode (F9). The frequency 
won't update otherwise. This one bites me all the time.


73...
Randy, W8FN

On 4/18/2019 10:30 PM, Tim moore wrote:

I'd get with someone who has a 7300 hooked up to DX4WIN (and the 7300 is a
VERY popular radio, so there has to be LOTS of folks with that
combination!) and compare configs. That said, does your radio really
support that baud rate of 115200? Mine does NOT, It only goes up to 38400..
And again, my setup (which of course is different, because it's for a Yaesu
FT DX 3000but some things remain constant between most radios/comm
ports/software logging apps) makes me wonder where you got some of the
numbers/config.Where did you get that address of 94 hex? Does your poll
rate (5000) match the poll rate in your radio menu? does your baud (115200)
match on ALL THREE PLACES: radio menu, DX4WIN (we see that it is what that
is set to) and also on the port on your laptop/computer? the key is
EVERYTHING has to matchthe settings in the radio menuthe settings
in DX4WINand any settings on the port you are attached to on the
computer/laptop. I'd check ALL three places...that things like baud rate,
comm port, poll rate (only applies to the radio and DX4WINnot the
computer port), DTR, RTSare all set to the SAME THING. For instance, my
radio requires RTS to be set to HIGH. And mine requires NOTHING to be
configured in the Address (where you have 94 Hex). Mine will only go to
38400.and i have all three places set to 38400the radio (via the
menu option), the port on the laptop AND DX4WIN (in preference). All three
places have to match...and can only be set to a rate that all three places
support.

Forgive me if the above was to "obvious", but I've learned in trouble
shooting over 40 years in the comm/IT business (and often...like this
case...with the proverbial "3000 mile screwdriver" as we say in the
business, because I'm not there to physically see your setup)...never
assume anything, no matter how obvious it may or may not be to one person
or the other! Again, get someone with a 7300 on the DX4WIN forum to share
settings.or check the things I mention.

K4TK



Tim Moore
PMP


On Thu, Apr 18, 2019 at 8:32 PM Mark Lunday  wrote:


Tim and All



Thanks.  Sorry for the delayed response.



My setup



- Windows 10 64 bit, build 17763
- VSPE 64 bit v0.938.4.846, with license for 64 bit
- Band Master 1.6, perfect synch with the 7300
- WSJT-X 2.1.0, perfect synch with the 7300
- FL Digi 4.1.01, perfect synch with the 7300
- DXLab DX Commander 13.9.0, perfect synch with the 7300



DX4WIN 9.0.3.1160, not synching properly



Capture1 shows the settings of the RADIO control in DX4WIN, which are the
same as the other programs that are connecting to the 7300:
115,200/N/8/2/DTS=0/RTS=0

Capture2 shows the DX4WIN readout of the 7300 frequency.  Note that the
secondary freq on 40 meters is correct (not in use when snip was taken).
The primary freq is haywire.

Capture3 shows the DX4WIN readout of the 7300 frequency 5 second after
Capture2.  Note that the secondary freq on 40 meters is correct (not in use
when snip was taken).  The primary freq is haywire.





The primary freq readout jumps back and forth between Capture2 and
Capture3.





Mark Lunday, WD4ELG

Greensboro, NC  FM06be

wd4...@arrl.net

http://wd4elg.blogspot.com

SKCC #16439  FISTS #17972  QRP ARCI #16497


__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html



__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] I don't see DX4WIN reading the freq of my 7300

2019-04-18 Thread Tim moore 
I'd get with someone who has a 7300 hooked up to DX4WIN (and the 7300 is a
VERY popular radio, so there has to be LOTS of folks with that
combination!) and compare configs. That said, does your radio really
support that baud rate of 115200? Mine does NOT, It only goes up to 38400..
And again, my setup (which of course is different, because it's for a Yaesu
FT DX 3000but some things remain constant between most radios/comm
ports/software logging apps) makes me wonder where you got some of the
numbers/config.Where did you get that address of 94 hex? Does your poll
rate (5000) match the poll rate in your radio menu? does your baud (115200)
match on ALL THREE PLACES: radio menu, DX4WIN (we see that it is what that
is set to) and also on the port on your laptop/computer? the key is
EVERYTHING has to matchthe settings in the radio menuthe settings
in DX4WINand any settings on the port you are attached to on the
computer/laptop. I'd check ALL three places...that things like baud rate,
comm port, poll rate (only applies to the radio and DX4WINnot the
computer port), DTR, RTSare all set to the SAME THING. For instance, my
radio requires RTS to be set to HIGH. And mine requires NOTHING to be
configured in the Address (where you have 94 Hex). Mine will only go to
38400.and i have all three places set to 38400the radio (via the
menu option), the port on the laptop AND DX4WIN (in preference). All three
places have to match...and can only be set to a rate that all three places
support.

Forgive me if the above was to "obvious", but I've learned in trouble
shooting over 40 years in the comm/IT business (and often...like this
case...with the proverbial "3000 mile screwdriver" as we say in the
business, because I'm not there to physically see your setup)...never
assume anything, no matter how obvious it may or may not be to one person
or the other! Again, get someone with a 7300 on the DX4WIN forum to share
settings.or check the things I mention.

K4TK



Tim Moore
PMP


On Thu, Apr 18, 2019 at 8:32 PM Mark Lunday  wrote:

> Tim and All
>
>
>
> Thanks.  Sorry for the delayed response.
>
>
>
> My setup
>
>
>
>- Windows 10 64 bit, build 17763
>- VSPE 64 bit v0.938.4.846, with license for 64 bit
>- Band Master 1.6, perfect synch with the 7300
>- WSJT-X 2.1.0, perfect synch with the 7300
>- FL Digi 4.1.01, perfect synch with the 7300
>- DXLab DX Commander 13.9.0, perfect synch with the 7300
>
>
>
> DX4WIN 9.0.3.1160, not synching properly
>
>
>
> Capture1 shows the settings of the RADIO control in DX4WIN, which are the
> same as the other programs that are connecting to the 7300:
> 115,200/N/8/2/DTS=0/RTS=0
>
> Capture2 shows the DX4WIN readout of the 7300 frequency.  Note that the
> secondary freq on 40 meters is correct (not in use when snip was taken).
> The primary freq is haywire.
>
> Capture3 shows the DX4WIN readout of the 7300 frequency 5 second after
> Capture2.  Note that the secondary freq on 40 meters is correct (not in use
> when snip was taken).  The primary freq is haywire.
>
>
>
>
>
> The primary freq readout jumps back and forth between Capture2 and
> Capture3.
>
>
>
>
>
> Mark Lunday, WD4ELG
>
> Greensboro, NC  FM06be
>
> wd4...@arrl.net
>
> http://wd4elg.blogspot.com
>
> SKCC #16439  FISTS #17972  QRP ARCI #16497
>
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] I don't see DX4WIN reading the freq of my 7300

2019-04-11 Thread Jørgen Louis Christensen 

Hi Tim

I had the same problem but i just use the IC-7600 and change the hex-adress

Regards 5Q2J, Joe

Den 12-04-2019 kl. 03:48 skrev Tim moore:

mine does show both the band and frequency. That is, if I'm adding a QSO
usinig "Add Real-Time". If i add "off-line", then it does NOT show
frequency automatically, I have to add it manually. But if I add a QSO
using "add Real-Time".even if i'm just in the "add Real-Time"
modethe computer/DX4WIN tracks both the frequency and the band (and the
mode too). I'd make sure I had my radio settings correct in preferences.
Pick the right rigand have the right baud rate, comm port, poll rate,
DTR, DTSetc. have them set right on BOTH ends...radio menu AND DX4WIN
settings.

K4TK



Tim Moore
PMP


On Thu, Apr 11, 2019 at 12:16 AM Mark Lunday  wrote:


Only the band is showing in the QSO window.  Is there a specific setting
that I need to check?

Mark Lunday, WD4ELG
Greensboro, NC  FM06be
wd4...@arrl.net
http://wd4elg.blogspot.com
SKCC #16439  FISTS #17972  QRP ARCI #16497

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html


__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] I don't see DX4WIN reading the freq of my 7300

2019-04-11 Thread Jim Reisert AD1C 
On Thu, Apr 11, 2019 at 12:05 AM Kostas SV1DPI wrote:
>
> I don't think that dx4win shows the current frequency. When you log a
> qso, is the frequency logged. This is what dx4win does. Also you can
> check that dx4win reads the frequency in bandmap (right click over the
> dx spots and bandmap)

My recollection is that in real-time Add mode (F9), the Frequency
field will update as you spin the dial.  But the bandmap is an easier
way to tell.

I'm about 25 miles away from the shack, so I can't test whether my
memory is right or not.

-- 
Jim Reisert AD1C, , http://www.ad1c.us
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] I don't see DX4WIN reading the freq of my 7300

2019-04-11 Thread Kostas SV1DPI 
I don't think that dx4win shows the current frequency. When you log a 
qso, is the frequency logged. This is what dx4win does. Also you can 
check that dx4win reads the frequency in bandmap (right click over the 
dx spots and bandmap)


...73 de Kostas SV1DPI
  (One of SZ1A-EP6T)

Στις 11/4/2019 8:16 π.μ., ο Mark Lunday έγραψε:

Only the band is showing in the QSO window.  Is there a specific setting that I 
need to check?

Mark Lunday, WD4ELG
Greensboro, NC  FM06be
wd4...@arrl.net
http://wd4elg.blogspot.com
SKCC #16439  FISTS #17972  QRP ARCI #16497

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Dx4win] I don't see DX4WIN reading the freq of my 7300

2019-04-10 Thread Mark Lunday 
Only the band is showing in the QSO window.  Is there a specific setting that I 
need to check?

Mark Lunday, WD4ELG
Greensboro, NC  FM06be
wd4...@arrl.net
http://wd4elg.blogspot.com
SKCC #16439  FISTS #17972  QRP ARCI #16497

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html