Re: [Dx4win] Spotting Question

2010-10-13 Thread Jim Reisert AD1C
On 10/12/2010 9:00 PM, Mark K3MSB wrote: I'm still am not able to configure DX4WIN to reliably provide spots. Here's a screen shot after I worked CE0Y/DK7ZB, PJ5/K1XM, and JW/JQ2GYU. http://www.k3msb.com/temp/dx4win_spot_page.jpg All are new band countries, yet only the CE0Y station

Re: [Dx4win] Spotting Question

2010-10-13 Thread Paul van der Eijk
Mark, True for a different call, same country, same band and mode. The SAME call/band/mode is always No Interest. --Paul, KK4HD Mark K3MSB wrote: I was expecting them to show up with the Band/Mode not confirmed or Award Band not confirmedcolors, not the No Interest colors ?? Mark On Tue,

Re: [Dx4win] Spotting Question

2010-10-13 Thread Mark K3MSB
Ah! Thanks Paul. Mark K3MSB On Wed, Oct 13, 2010 at 10:24 PM, Paul van der Eijk pvandere...@cox.netwrote: Mark, True for a different call, same country, same band and mode. The SAME call/band/mode is always No Interest. --Paul, KK4HD Mark K3MSB wrote: I was expecting them to show up

Re: [Dx4win] Spotting Question

2010-10-12 Thread Mark K3MSB
I'm still am not able to configure DX4WIN to reliably provide spots. Here's a screen shot after I worked CE0Y/DK7ZB, PJ5/K1XM, and JW/JQ2GYU. http://www.k3msb.com/temp/dx4win_spot_page.jpg All are new band countries, yet only the CE0Y station indicates this; the other two are in the no

Re: [Dx4win] Spotting Question

2010-10-12 Thread Paul van der Eijk
Mark, The No interest color for PJ5/K1XM, and JW/JQ2GYU is correct; you just worked them! So I wonder why you do not see the No interest color for CE0Y/DK7ZB; did you enter that exact call in your log? --Paul, KK4HD Mark K3MSB wrote: I'm still am not able to configure DX4WIN to reliably

Re: [Dx4win] Spotting Question

2010-10-10 Thread Mark K3MSB
Surprisingly, my 40M cutoff frequency was 7140 instead of 7040 (which is now corrected). I have my cutoff set at 40 KHz up from the low end of 80, 40, 20, and 15. Mark K3MSB On Sat, Oct 9, 2010 at 6:37 AM, Mel ve...@videotron.ca wrote: No, the country should have been determined correctly,

Re: [Dx4win] Spotting Question

2010-10-09 Thread Mel
No, the country should have been determined correctly, but the mode may not have been. An ongoing problem is the spotting network does not require a mode (overdue given 99% of spots are probably generated by software) and it has to be guessed at by frequency. This is what the CW cutoff is used

[Dx4win] Spotting Question

2010-10-08 Thread Mark K3MSB
I just worked MJ/DL2SBY on 40 CW. This is a new band country for me. The call showed up in the Packet Window, but was not highlighted in the DX Spots window. I have no entries in Prefix/Zones for Spotters. Other stations are getting highlighted as I expect them. Is there an issue with