Re: [Dx4win] VUCC Report Blank
(missed the full chain of the help to get into the archives so sending again - each reflector does things different so get different results on "reply", etc. - KI6X) Thanks much Arne, that did it. I kept looking at VUCC in the report awards. Now I think I know what happened. When I upgraded with Win 10 and had changes in ports, I loaded an old INI without that and forgot to edit that. I knew something to do with no bands to choose in the award report was the issue. Can be frustrating when you know you are missing something obvious! Dan KI6X -Original Message- From: n...@comcast.net [mailto:n...@comcast.net] Sent: Wednesday, November 25, 2015 6:42 PM To: Dan Violette Subject: Re: [Dx4win] VUCC Report Blank Dan Have you checked the band boxes for VUCC in the SETUP Preferences? Arne N7KA -Original Message- From: Dan Violette [mailto:dank...@socal.rr.com] Sent: Wednesday, November 25, 2015 6:33 PM To: 'DX4WIN@mailman.qth.net' Subject: RE: [Dx4win] VUCC Report Blank Now I realize the VUCC field should be blank since I never submitted anything. Just not getting W/C results in my VUCC Report. Dan KI6X -Original Message- From: DX4WIN [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of Dan Violette Sent: Wednesday, November 25, 2015 5:12 PM To: DX4WIN@mailman.qth.net Subject: [Dx4win] VUCC Report Blank I have done this every few months for a couple years now and cannot today after an hour trying. I am trying to get a VUCC report of my grids worked and confirmed. I then save as CSV and edit in Excel to have paper report. All VUCC reports are blank (some say "prefix" in the first column where I would suspect "grid") My VUCC field is blank for any QSO record (Searched VUCC Mixed field for C or S) I just can't figure out what is wrong and can't get C & W report for the grids. /Dan, KI6X __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] VUCC Report Blank
Thanks much Arne, that did it. I kept looking at VUCC in the report awards. Now I think I know what happened. When I upgraded with Win 10 and had changes in ports, I loaded an old INI without that and forgot to edit that. I knew something to do with no bands to choose in the award report was the issue. Can be frustrating when you know you are missing something obvious! Dan KI6X -Original Message- From: Dan Violette [mailto:dank...@socal.rr.com] Sent: Wednesday, November 25, 2015 6:33 PM To: 'DX4WIN@mailman.qth.net' Subject: RE: [Dx4win] VUCC Report Blank Now I realize the VUCC field should be blank since I never submitted anything. Just not getting W/C results in my VUCC Report. Dan KI6X -Original Message- From: DX4WIN [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of Dan Violette Sent: Wednesday, November 25, 2015 5:12 PM To: DX4WIN@mailman.qth.net Subject: [Dx4win] VUCC Report Blank I have done this every few months for a couple years now and cannot today after an hour trying. I am trying to get a VUCC report of my grids worked and confirmed. I then save as CSV and edit in Excel to have paper report. All VUCC reports are blank (some say "prefix" in the first column where I would suspect "grid") My VUCC field is blank for any QSO record (Searched VUCC Mixed field for C or S) I just can't figure out what is wrong and can't get C & W report for the grids. /Dan, KI6X __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] VUCC Report Blank
On Wed, Nov 25, 2015 at 7:32 PM, Dan Violette KI6X wrote: > Now I realize the VUCC field should be blank since I never submitted > anything. Just not getting W/C results in my VUCC Report. Dan KI6X What version of DX4WIN? What menu(s) are you using to generate this report? Do you have your VUCC bands set up correctly in your Preferences? If you go to File | Awards and click on the VUCC tab, is everything there set up correctly (bands, confirmation type, etc.)? -- Jim Reisert AD1C, , http://www.ad1c.us __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] VUCC Report Blank
Now I realize the VUCC field should be blank since I never submitted anything. Just not getting W/C results in my VUCC Report. Dan KI6X -Original Message- From: DX4WIN [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of Dan Violette Sent: Wednesday, November 25, 2015 5:12 PM To: DX4WIN@mailman.qth.net Subject: [Dx4win] VUCC Report Blank I have done this every few months for a couple years now and cannot today after an hour trying. I am trying to get a VUCC report of my grids worked and confirmed. I then save as CSV and edit in Excel to have paper report. All VUCC reports are blank (some say "prefix" in the first column where I would suspect "grid") My VUCC field is blank for any QSO record (Searched VUCC Mixed field for C or S) I just can't figure out what is wrong and can't get C & W report for the grids. /Dan, KI6X __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Dx4win] VUCC Report Blank
I have done this every few months for a couple years now and cannot today after an hour trying. I am trying to get a VUCC report of my grids worked and confirmed. I then save as CSV and edit in Excel to have paper report. All VUCC reports are blank (some say "prefix" in the first column where I would suspect "grid") My VUCC field is blank for any QSO record (Searched VUCC Mixed field for C or S) I just can't figure out what is wrong and can't get C & W report for the grids. /Dan, KI6X __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html