Re: [Dx4win] OT - LOTW w/Multiple Callsigns ??
As Mike said, what you need to to is to set up a station location that defines a QTH with that callsign. Then you choose that station location when signing the log. Yes, that can mean that you need to duplicate the QTH information for the "Ohio - Old Call" station location if both calls were from the same QTH. (You can avoid that by setting the callsign for the station location to "None". TQSL will then ask you what callsign certificate to use for the QSOs being uploaded.) 73, -Rick On Wed, Dec 14, 2016 at 3:01 PM, Mike Rhodeswrote: > ...finally getting around to uploading my logs from my two previous > callsigns (WN/WA8NBO) to LOTW. Have installed the certificates, separated > the Q's from my log and created ADIF files. However, I have yet to figure > out how to upload using the correct certificate. If the process is defined > in the instructions, I have overlooked it. Any help greatly appreciated. > > Thanks, > Mike / W8DN > DX4Win Since Version 0.97 > > __ > DX4WIN mailing list > Home: http://mailman.qth.net/mailman/listinfo/dx4win > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:DX4WIN@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > -- Rick Murphy, CISSP-ISSAP, K1MU/4, Annandale VA USA __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] OT - LOTW w/Multiple Callsigns ??
Hello Mike - No, that doesn't sound right. It should also show WN8NBO and WA8NBO as choices. Did you establish station locations for both of those certificates? When I upload a file, after selecting the file, the Select Station Location for Signing window shows all five of my callsigns. You should see all three of yours here. There is a button on the far left of this window that says New... This will allow you to establish a new station location for any of your existing callsigns, but does not allow you to add a callsign. Check Callsign Certificates tab and make sure all three callsigns appear here. Next, check the Station Locations tab and make sure each callsign has a location. You can add Station Locations on this tab. GL. 73, Mike W0VTT -Original Message- From: DX4WIN [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of Mike Rhodes Sent: Wednesday, 14 December, 2016 14:17 To: dx4win@mailman.qth.net Subject: Re: [Dx4win] OT - LOTW w/Multiple Callsigns ?? Mike, When I do the "Sign a log" thing, it says it will sign and upload as W8DN with location Ohio (all 3 calls use Ohio as location). Is it going to give me a chance to change after that or immediately send the file. Seems like I would remember since I just uploaded DN Qs last night but I guess that is one of the "benefits" of getting to be an old fart. Thanks, Mike / W8DN DX4Win Since Version 0.97 On 12/14/2016 3:08 PM, Mike Cizek W0VTT wrote: > Hello Mike - > > The certificate selection is in TQSL: > Log Operations > Sign a Log and upload it automatically to LoTW > Select File - Open > Select Station Location for Signing > > Check the Callsign Certificates tab in TQSL to make sure your certificates > are properly installed. They should each have the yellow emblem next to > them. > > 73, > Mike Cizek W0VTT > > -Original Message- > From: DX4WIN [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of Mike > Rhodes > Sent: Wednesday, 14 December, 2016 14:02 > To: dx4win@mailman.qth.net > Subject: [Dx4win] OT - LOTW w/Multiple Callsigns ?? > > ...finally getting around to uploading my logs from my two previous > callsigns (WN/WA8NBO) to LOTW. Have installed the certificates, > separated the Q's from my log and created ADIF files. However, I have > yet to figure out how to upload using the correct certificate. If the > process is defined in the instructions, I have overlooked it. Any help > greatly appreciated. > > Thanks, > Mike / W8DN > DX4Win Since Version 0.97 > > __ > DX4WIN mailing list > Home: http://mailman.qth.net/mailman/listinfo/dx4win > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:DX4WIN@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > > __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] OT - LOTW w/Multiple Callsigns ??
Mike, When I do the "Sign a log" thing, it says it will sign and upload as W8DN with location Ohio (all 3 calls use Ohio as location). Is it going to give me a chance to change after that or immediately send the file. Seems like I would remember since I just uploaded DN Qs last night but I guess that is one of the "benefits" of getting to be an old fart. Thanks, Mike / W8DN DX4Win Since Version 0.97 On 12/14/2016 3:08 PM, Mike Cizek W0VTT wrote: Hello Mike - The certificate selection is in TQSL: Log Operations Sign a Log and upload it automatically to LoTW Select File - Open Select Station Location for Signing Check the Callsign Certificates tab in TQSL to make sure your certificates are properly installed. They should each have the yellow emblem next to them. 73, Mike Cizek W0VTT -Original Message- From: DX4WIN [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of Mike Rhodes Sent: Wednesday, 14 December, 2016 14:02 To: dx4win@mailman.qth.net Subject: [Dx4win] OT - LOTW w/Multiple Callsigns ?? ...finally getting around to uploading my logs from my two previous callsigns (WN/WA8NBO) to LOTW. Have installed the certificates, separated the Q's from my log and created ADIF files. However, I have yet to figure out how to upload using the correct certificate. If the process is defined in the instructions, I have overlooked it. Any help greatly appreciated. Thanks, Mike / W8DN DX4Win Since Version 0.97 __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] OT - LOTW w/Multiple Callsigns ??
Hello Mike - The certificate selection is in TQSL: Log Operations Sign a Log and upload it automatically to LoTW Select File - Open Select Station Location for Signing Check the Callsign Certificates tab in TQSL to make sure your certificates are properly installed. They should each have the yellow emblem next to them. 73, Mike Cizek W0VTT -Original Message- From: DX4WIN [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of Mike Rhodes Sent: Wednesday, 14 December, 2016 14:02 To: dx4win@mailman.qth.net Subject: [Dx4win] OT - LOTW w/Multiple Callsigns ?? ...finally getting around to uploading my logs from my two previous callsigns (WN/WA8NBO) to LOTW. Have installed the certificates, separated the Q's from my log and created ADIF files. However, I have yet to figure out how to upload using the correct certificate. If the process is defined in the instructions, I have overlooked it. Any help greatly appreciated. Thanks, Mike / W8DN DX4Win Since Version 0.97 __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Dx4win] OT - LOTW w/Multiple Callsigns ??
...finally getting around to uploading my logs from my two previous callsigns (WN/WA8NBO) to LOTW. Have installed the certificates, separated the Q's from my log and created ADIF files. However, I have yet to figure out how to upload using the correct certificate. If the process is defined in the instructions, I have overlooked it. Any help greatly appreciated. Thanks, Mike / W8DN DX4Win Since Version 0.97 __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html