Re: [Dx4win] Problem since upgrade to W10/W11

[David Gould]

Hi Guy,

Thanks for the explanation and suggestions.  I have re-booted the 
computer, started Win4Yaesu and then tried to start DX4Win.   No change 
in the response.  I still get the error boxes which I have to close and 
then DX4Win starts as normal.


By playing around I have found a solution.  My virtual COM port pair was 
20/21. The set-up video said it didn't matter which of the pair was used 
for the application.  I had it set for COM20, for a trial I changed it 
to COM21 and that has got rid of the problem.


That is one more niggle removed.  Thanks.

73,

Dave G3UEG



On 09/03/2023 12:46, ON4AOI wrote:

Hi Dave,
This is 100% not a windows problem but the order you start all programs.
I use Win4Icom and Com-0-Com also even via remote.
DX4WIN is based on delphi and needs exclusive serial port(s)
Startup Win4Yaesu with the radio connected and make sure the setup is perfect.
Make two pairs of Com-0-Com
The 1st pair should be for DX4WIN at max 38400 Baud even if your radio can go 
higher.
Be sure that the rigdriver in dx4win has the same baudrate, if not then change 
it.
The 2nd pair should be for WSJT-X also at max 38400 Baud.
If for any reason wsjtx build in rigdrivers are not perfect use omnirig v1.18
(this one works perfect newer have also glitches on some computers)
Start
WIN4YAESU
Wait until all is ready
Start
DX4WIN
If radio is connected
Then
Start
WSJT-X
Shutdown in reverse order
Can be setup in WIN4YAESU

Second option is if your radio has USB and also a SERIAL port
To setup the radio with via serial port to DX4WIN, but make sure
You use FTDI based USB to serial cable if no serial port is available
Most of the other usb2serial is crap.

Guy ON4AOI - OT7K
  


-Original Message-
From: dx4win-boun...@mailman.qth.net  On Behalf 
Of David Gould
Sent: Thursday, March 9, 2023 12:42 PM
To: DX4WIN@mailman.qth.net
Subject: [Dx4win] Problem since upgrade to W10/W11

Everything worked smoothly with W7.   The problem started with a new W10 
computer which very quickly updated itself to W11 without any input from me, so 
I am not absolutely sure whether the problem existed in W10 as well as it being 
a problem now with W11.  It is a minor nuisance rather than a serious problem.

When I start DX4Win I get a box come up "ie-Open device already open" I click OK  then a 
second box comes up "Radio error number 1 Press help for details"   The help advises that 
the serial port is i use and to select  a different port or use another device. If I just close the 
second box DX4Win then starts normally.

I use Win4Yaesu  and Com-0-Com for rig control and virtual port sharing to 
enable me to use both DX4Win and WSJT-X (or JTDX)

Any suggestions on a) how to cure this annoyance or b) what further digging I 
can do to find the cause to help identify a cure?

73,

Dave  G3UEG



__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html


__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Problem since upgrade to W10/W11

[ON4AOI]

Hi Dave,
This is 100% not a windows problem but the order you start all programs.
I use Win4Icom and Com-0-Com also even via remote.
DX4WIN is based on delphi and needs exclusive serial port(s)
Startup Win4Yaesu with the radio connected and make sure the setup is perfect.
Make two pairs of Com-0-Com 
The 1st pair should be for DX4WIN at max 38400 Baud even if your radio can go 
higher.
Be sure that the rigdriver in dx4win has the same baudrate, if not then change 
it.
The 2nd pair should be for WSJT-X also at max 38400 Baud.
If for any reason wsjtx build in rigdrivers are not perfect use omnirig v1.18
(this one works perfect newer have also glitches on some computers)
Start
WIN4YAESU
Wait until all is ready
Start
DX4WIN
If radio is connected
Then 
Start
WSJT-X
Shutdown in reverse order
Can be setup in WIN4YAESU

Second option is if your radio has USB and also a SERIAL port
To setup the radio with via serial port to DX4WIN, but make sure
You use FTDI based USB to serial cable if no serial port is available
Most of the other usb2serial is crap.

Guy ON4AOI - OT7K 
 

-Original Message-
From: dx4win-boun...@mailman.qth.net  On Behalf 
Of David Gould
Sent: Thursday, March 9, 2023 12:42 PM
To: DX4WIN@mailman.qth.net
Subject: [Dx4win] Problem since upgrade to W10/W11

Everything worked smoothly with W7.   The problem started with a new W10 
computer which very quickly updated itself to W11 without any input from me, so 
I am not absolutely sure whether the problem existed in W10 as well as it being 
a problem now with W11.  It is a minor nuisance rather than a serious problem.

When I start DX4Win I get a box come up "ie-Open device already open" I click 
OK  then a second box comes up "Radio error number 1 Press help for details"   
The help advises that the serial port is i use and to select  a different port 
or use another device. If I just close the second box DX4Win then starts 
normally.

I use Win4Yaesu  and Com-0-Com for rig control and virtual port sharing to 
enable me to use both DX4Win and WSJT-X (or JTDX)

Any suggestions on a) how to cure this annoyance or b) what further digging I 
can do to find the cause to help identify a cure?

73,

Dave  G3UEG



__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Problem Updating DX4WIN

[W1ZZ via DX4WIN]

Jim all users of DX4win owe you much gratitude for your dedication.  
73

EdW1zz


Sent from Yahoo Mail for iPhone


On Sunday, October 16, 2022, 10:51 AM, Jim Reisert AD1C 
 wrote:

I just generated the DX4WIN data updates.  Once Paul has moved them to
the release area, then you can update.

73 - Jim AD1C

-- 
Jim Reisert AD1C, , https://ad1c.us
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html



__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Problem Updating DX4WIN

[Jim Reisert AD1C]

I just generated the DX4WIN data updates.  Once Paul has moved them to
the release area, then you can update.

73 - Jim AD1C

-- 
Jim Reisert AD1C, , https://ad1c.us
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Problem Updating DX4WIN

[Jim Reisert AD1C]

Hi Folks,

I was out of the country from 20-Sep through 14-Oct.  I returned home
late Friday night.

It looks like the last data file updates were on 17-Sep.  I decided to
give my development computer a vacation as well, which is why the
updates did not happen automatically.  I'll see if I can push one out
manually sometime today.  For future reference, I need to remember to
keep this computer running when I am away, which I have usually done
in the past.

There will be a new country file on Sunday 16-Oct.  I was hoping to
release one on Saturday but I had a few distractions.

--
Jim Reisert AD1C, , https://ad1c.us
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Problem Updating DX4WIN

[David Kozinn, K2DBK]

I've been in touch with Jim, AD1C and he'll be sending out an updated CTY
file at some point in the near future. There hasn't been a release since the
end of September, which is why there haven't been any updates since then.

73,
David, K2DBK

-Original Message-
From: dx4win-boun...@mailman.qth.net  On
Behalf Of David Pollard
Sent: Saturday, October 15, 2022 12:12 PM
To: dx4win@mailman.qth.net
Subject: [Dx4win] Problem Updating DX4WIN

I am not receiving any updates via the Help/Check For Updates Menu.  I am
running version 9.0.9.1259.  I have never had an issue with this until now.
Yesterday I noticed that the Update URL block in the preferences menu was
blank(I'm thinking it was always this way), so I copied and pasted the
update URL from the Help/Check For Updates/Status Menu.  Still a no-go.
Any help with this would be greatly appreciated.

73, Dave, N5IT
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Problem Updating DX4WIN

[ok1cf]

it's the same with me

Karel OK1CF

-Původní zpráva-
Od: dx4win-boun...@mailman.qth.net za uživatele Tom Doligalski via DX4WIN
Odesláno: sobota 15. října 2022 18:38
Komu: 'David Pollard' ; dx4win@mailman.qth.net
Předmět: Re: [Dx4win] Problem Updating DX4WIN

A blanks URL setting in preferences means it will check the default location
for updates.

As I recall I received an update about two weeks ago. Suggest patience!!

Tom W4KX

> -Original Message-
> From: dx4win-boun...@mailman.qth.net  
> On Behalf Of David Pollard
> Sent: Saturday, October 15, 2022 12:12 PM
> To: dx4win@mailman.qth.net
> Subject: [Dx4win] Problem Updating DX4WIN
> 
> I am not receiving any updates via the Help/Check For Updates Menu.  I 
> am running version 9.0.9.1259.  I have never had an issue with this 
> until
now.
> Yesterday I noticed that the Update URL block in the preferences menu 
> was blank(I'm thinking it was always this way), so I copied and pasted 
> the
update
> URL from the Help/Check For Updates/Status Menu.  Still a no-go.
> Any help with this would be greatly appreciated.
> 
> 73, Dave, N5IT
> __
> 
> DX4WIN mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:DX4WIN@mailman.qth.net
> 
> This list hosted by: http://www.qsl.net Please help support this email 
> list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Problem Updating DX4WIN

[Tom Doligalski via DX4WIN]

A blanks URL setting in preferences means it will check the default location
for updates.

As I recall I received an update about two weeks ago. Suggest patience!!

Tom W4KX

> -Original Message-
> From: dx4win-boun...@mailman.qth.net  boun...@mailman.qth.net> On Behalf Of David Pollard
> Sent: Saturday, October 15, 2022 12:12 PM
> To: dx4win@mailman.qth.net
> Subject: [Dx4win] Problem Updating DX4WIN
> 
> I am not receiving any updates via the Help/Check For Updates Menu.  I am
> running version 9.0.9.1259.  I have never had an issue with this until
now.
> Yesterday I noticed that the Update URL block in the preferences menu was
> blank(I'm thinking it was always this way), so I copied and pasted the
update
> URL from the Help/Check For Updates/Status Menu.  Still a no-go.
> Any help with this would be greatly appreciated.
> 
> 73, Dave, N5IT
> __
> 
> DX4WIN mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:DX4WIN@mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] problem

[Courtney Judd]

hi Wayne I have all the latest firmware/router microHam stuff ok but I 
noticed in the router software that the com port 5 (radio freq/mode) 
shows (open 4800 8n1) same in both dx4win and microHam  but I see 
nowhere in dx4win or microham, or radio (FTdx5000) to set it to 8n2 
I have to hit F9 when first opening the log ( I think that should be 
user selectable) and it goes directly to the rig freq/mode as it should. 
In dx4win.. preferences.. radio   max tries was set to 2 but I 
bumped that up to 10... hope that was the right way to move! so far so 
good but Zoran WA7AA also suggested running  a brouser video might be 
also affecting it. I am running WIN 10 , 2 monitors with Email program 
and Chrome also running along side DX4WIN. All this workee fine until 2 
days ago. thanks I sure do appreciate all the thoughts! 73's Cort K4WI



Wayne M 
Thursday, November 12, 2020 2:50 PM
Hi Cort,

Which radio are you using? You may want to check the virtual port 
drivers from the microham to make sure windows has not done one of 
it's updates on them. If it's a Yaesu radio check the stop bits 
(should be 2) and RTS setting in the radio as well as the software.


With 6 tries DX4W may not be connecting right from the git go. Once 
DX4W is up if you push F9 in DX4W does the computer read the frequency 
from the radio right away?


I no longer use a microham but have in the past. I am using the FT991a 
and FTdx5000 with DX4Win with no issues. I know microsoft has updated 
some prolific drivers and I have had trouble with them and had to 
revert to the original driver.


73

Wayne  WA1PMA




__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] problem

[WA7AA]

I have a similar problem to yours and here are the limited results of my 
troubleshooting, for what it's worth:


A few years ago, out of the blue and after years of using the same 
station setup, I began having radio time-outs while using DX4Win. I 
eventually traced the problem and was able to consistently reproduce it 
by playing any video heavy content in my web browser (Firefox). Browsing 
normal page content that does not require heavy use of the video card 
does not cause time-outs. I can't pinpoint the date when this started 
happening, so I have no idea whether it was caused by video card driver 
updates, automatic Windows resources change, DX4Win version change or 
whatever else.
However, a similar thing occurs while using N1MM+ with a slight but 
important difference: in this case, I get error messages on the N1MM+ 
status bar saying "Radio sent invalid CAT data", but there is no radio 
comms loss, i.e. it still reads frequencies and talks to my radio.
I don't know if this applies to your scenario. I simply got used to 
living with this and I make sure I don't watch video content while 
leaving DX4Win in the Real Time Entry mode. I suspect something 
somewhere in the Windows video settings interferes with the COM port 
setup, but I can't be bothered to go deep diving in there.
I attempted to change DX4Win radio polling to make it the same as N1MM+ 
without success.


I hope this helps before you go crazy reinstalling all kinds of software.

73,

Zoran WA7AA


thanks Larry, yes, that is the way I always start up in the 
morning computer on first... loads up and running, then I turn on 
the radio and out board items, then open either DX4WIN or Writelog 
 shut down the opposite nite time. When I get a time out event, if 
I close DX4WIN and re-open all works for a while but eventually it 
times out. Wierd part is Writelog, microHam router, radio/amp and 
computer no problem. Thinking about doing a re-install of DX4WIN 9.0.9 
but I always get extremely nervous when messing around with 
software usually a cussing fit going to happen somewhere  then 
the wifie tells me I should have known better!  hopefully this 
thing will self correct but who am I kidding? lol, 73's Cort K4WI



LARRY MALLEK 
Thursday, November 12, 2020 11:40 AM


*CORT: MY SYSTEM DOES THE SAME THING IF I DO NOT HAVE THE RADIO ON 
BEFORE TURNING DX4WIN ON. IF THE RADIO IS ON THEN I DO NOT HAVE THE 
PROBLEM. HOPE THIS HELPS YOU AS IT WAS A WHILE BEFORE I FOUND THE 
SAME THING HERE.  BEST TO YOU AND YOUR AND STAY SAFE. DE LARRY - K6YUI *


On 12-Nov-20 7:48 AM, Courtney Judd wrote:
--
Larry A. Mallek, K6YUI
lmal...@roadrunner.com 
1st K6/W6 TO MAKE HONOR ROLL ON RTTY. (2012)
Skype name larry-k6yui
President So Calif DX Club 2010

U.S.A.F. 1960-1966

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html



__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] problem

[Courtney Judd]

hey Mike, mine was set at 6 to I bumped it up to 10... DTR HIGH not 
checked, RTS HIGH checked. The microHam router sets the ports for the 
software to talk with the computer and radio both with DX4WIN and 
Writelog ports are set for radio freq and mode and also for CW 
sending and RTTY thru MMTTY... this all worked perfectly up until a 
couple of days ago usually I blame WIN 10 updates for any strange 
happenings but haven't had one of those for a couple of weeks! Thanks 
73's Cort K4WI



Mike Cizek W0VTT <mailto:mgci...@gmail.com>
Thursday, November 12, 2020 12:12 PM
Hello Courtney,

You might try increasing the number of tries before dx4win times out:
File> Preferences > Radio: Max Tries=? I just looked and mine is set at 2,
which is probably the default. That seems pretty low. Also, is the
computer talking to dx4win through the Microham router? Could that be part
of the problem? I never had any Microham stuff so don't know how they 
work,

but think one of their guys reads this list and may be able to comment.


--
73,
Mike Cizek W0VTT

-Original Message-
From: dx4win-boun...@mailman.qth.net 
[mailto:dx4win-boun...@mailman.qth.net]

On Behalf Of Courtney Judd
Sent: Thursday, November 12, 2020 12:04
To: LARRY MALLEK; Dx4win@mailman.qth.net
Subject: Re: [Dx4win] problem

thanks Larry, yes, that is the way I always start up in the morning
computer on first... loads up and running, then I turn on the radio and
out board items, then open either DX4WIN or Writelog  shut down the
opposite nite time. When I get a time out event, if I close DX4WIN and
re-open all works for a while but eventually it times out. Wierd part is
Writelog, microHam router, radio/amp and computer no problem. Thinking
about doing a re-install of DX4WIN 9.0.9 but I always get extremely
nervous when messing around with software usually a cussing fit
going to happen somewhere  then the wifie tells me I should have
known better!  hopefully this thing will self correct but who am I
kidding? lol, 73's Cort K4WI

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html


__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] problem

[Mike Cizek W0VTT]

Hello Courtney,

You might try increasing the number of tries before dx4win times out:
File> Preferences > Radio: Max Tries=?  I just looked and mine is set at 2,
which is probably the default.  That seems pretty low.  Also, is the
computer talking to dx4win through the Microham router?  Could that be part
of the problem?  I never had any Microham stuff so don't know how they work,
but think one of their guys reads this list and may be able to comment.


--
73,
Mike Cizek W0VTT 

-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf Of Courtney Judd
Sent: Thursday, November 12, 2020 12:04
To: LARRY MALLEK; Dx4win@mailman.qth.net
Subject: Re: [Dx4win] problem

thanks Larry, yes, that is the way I always start up in the morning 
computer on first... loads up and running, then I turn on the radio and 
out board items, then open either DX4WIN or Writelog  shut down the 
opposite nite time. When I get a time out event, if I close DX4WIN and 
re-open all works for a while but eventually it times out. Wierd part is 
Writelog, microHam router, radio/amp and computer no problem. Thinking 
about doing a re-install of DX4WIN 9.0.9 but I always get extremely 
nervous when messing around with software usually a cussing fit 
going to happen somewhere  then the wifie tells me I should have 
known better!  hopefully this thing will self correct but who am I 
kidding? lol, 73's Cort K4WI

> LARRY MALLEK <mailto:lmal...@roadrunner.com>
> Thursday, November 12, 2020 11:40 AM
>
>
> *CORT: MY SYSTEM DOES THE SAME THING IF I DO NOT HAVE THE RADIO ON 
> BEFORE TURNING DX4WIN ON. IF THE RADIO IS ON THEN I DO NOT HAVE THE 
> PROBLEM. HOPE THIS HELPS YOU AS IT WAS A WHILE BEFORE I FOUND THE SAME 
> THING HERE.  BEST TO YOU AND YOUR AND STAY SAFE. DE LARRY - K6YUI *
>
> On 12-Nov-20 7:48 AM, Courtney Judd wrote:
> -- 
> Larry A. Mallek, K6YUI
> lmal...@roadrunner.com <mailto:lmal...@roadrunner.com>
> 1st K6/W6 TO MAKE HONOR ROLL ON RTTY. (2012)
> Skype name larry-k6yui
> President So Calif DX Club 2010
>
> U.S.A.F. 1960-1966
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] problem

[Courtney Judd]

thanks Larry, yes, that is the way I always start up in the morning 
computer on first... loads up and running, then I turn on the radio and 
out board items, then open either DX4WIN or Writelog  shut down the 
opposite nite time. When I get a time out event, if I close DX4WIN and 
re-open all works for a while but eventually it times out. Wierd part is 
Writelog, microHam router, radio/amp and computer no problem. Thinking 
about doing a re-install of DX4WIN 9.0.9 but I always get extremely 
nervous when messing around with software usually a cussing fit 
going to happen somewhere  then the wifie tells me I should have 
known better!  hopefully this thing will self correct but who am I 
kidding? lol, 73's Cort K4WI



LARRY MALLEK 
Thursday, November 12, 2020 11:40 AM


*CORT: MY SYSTEM DOES THE SAME THING IF I DO NOT HAVE THE RADIO ON 
BEFORE TURNING DX4WIN ON. IF THE RADIO IS ON THEN I DO NOT HAVE THE 
PROBLEM. HOPE THIS HELPS YOU AS IT WAS A WHILE BEFORE I FOUND THE SAME 
THING HERE.  BEST TO YOU AND YOUR AND STAY SAFE. DE LARRY - K6YUI *


On 12-Nov-20 7:48 AM, Courtney Judd wrote:
--
Larry A. Mallek, K6YUI
lmal...@roadrunner.com 
1st K6/W6 TO MAKE HONOR ROLL ON RTTY. (2012)
Skype name larry-k6yui
President So Calif DX Club 2010

U.S.A.F. 1960-1966

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] PROBLEM WITH DX4Win and MMTTY (and coincidentally with PSK31)

[kr6c]

Good Morning,

The lack of transmit almost sounds like the proper comm port, or settings
are not correct. I have occasionally had problems after Microsoft pushed
their updates and need to go and check/reset settings.

If you can actually hear the RTTY signals, have it centered properly on the
MMTTY screen, and it prints gibberish, make sure you are on the right
sideband.  I also don't know if you are using FSK or AFSK, and keyline or
VOX activation.

I have to use EXTFSK 1.06 program as the MMTTY/PSK keying source on my
FT-1000MP and run FSK.  I use COM7, FSK output=TXD and PTT=RTS.  Once you
have EXTFSK loaded you can select it in MMTTY as the com source.  This has
worked well for me.

I too much prefer RTTY/PSK and some other digital modes with FLDIGI as the
lack of human in the loop with FT8 type modes does not give me a thrill. I
also like to hear the RTTY/PSK signal and listening to FT8 reminds me of the
first day of band class, learning how to play the flute!

Hope this helps
73
Charlie KR6C

-Original Message-
From: dx4win-boun...@mailman.qth.net  On
Behalf Of andyphewitt via DX4WIN
Sent: Friday, October 16, 2020 7:08 AM
To: Dx4win@Mailman. Qth. Net 
Subject: [Dx4win] PROBLEM WITH DX4Win and MMTTY (and coincidentally with
PSK31)

Hi I hope there is some one on here who can advise me? I am running DX4Win
ver 9.0.9.1259.
 
I recently had a problem with the SOUND setup in my W10 PC and could not
operate digi modes. That seems to now be resolved as I can now operate
WSJT-X (not that I really want to) and RTTY directly to the MMTTY program.
This had been working faultlessly for the past three years plus until it
suddenly stopped at the beginning of Sept.

 After some difficulty and assistance we have got it working. However if I
try to operate using the interface from DX4Win the MMTTY windows appear and
there is noise on the screen printing rubbish. I cannot find any FSK
signals, as everyone is on FT8! Nevertheless as I get rubbish on the screen
I assume that it would print out serious copy if there were any. The problem
that I have found is that I cannot TX. If I try to send RYs the two tones
appear on the screen but the rig does not go to TX. 

 

Coincidentally I tried the PSK module inside DX4Win that receives and
decodes PSK but will not go into TX.

 

I assume there is a common setting that I have not ticked or something? I
have looked at the help files but they don't.

 

Many 73

Andy G3SVD

 

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html


-- 
This email has been checked for viruses by AVG.
https://www.avg.com

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Problem with DX spots window (my own fault)

[Paul van der Eijk]

Joe, just checking the obvious: do you have your log open?

—Paul

On Thu, Jul 18, 2019 at 1:07 AM kostas sv1dpi  wrote:

> Have you ticked boxes under
>
> File>Preferences>Packet3 also?
>
> 73 Kostas SV1DPI
>
> Στις 18/7/2019 04:19, ο Joe έγραψε:
> > A couple of days ago I accidently clicked the DX4WIN icon on my task bar
> > twice instead of once.  That put me into the DEMO mode, but it did more
> than
> > that.  When I exited and reopened with one click I was back to square one
> > and all my settings, preferences, windows, etc. were gone.  Strangely,
> the
> > data files in the save directory were still there.
> >
> >
> >
> > Using some of the past backups, I was able to get everything back to
> normal
> > except for one thing:
> >
> >
> >
> > Spots show up normally in the Packet Window and are transferred as usual
> to
> > the "DX spots (DXCC) Sorted by Time" window except that the preference
> for
> > every spot is 9 and therefore all the info for every spot is gray.
> >
> >
> >
> > I have the appropriate frequency and mode boxes checked in both the
> > File>Preferences>Station tab and the File>Awards tab.  In
> > File>Preference>Packet the color scheme for DXCC is checked and there the
> > colors are normal.
> >
> >
> >
> > I've tried the Help functions but don't see anything that addresses this
> > specific problem.
> >
> >
> >
> > I'm sure it's a simple fix, but I haven't been able to figure it out.
> >
> >
> >
> > Any help would be appreciated.
> >
> >
> >
> > Tnx es 73,
> >
> >
> >
> > Joe, K1JB
> >
> > __
> > DX4WIN mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/dx4win
> > Help: http://mailman.qth.net/mmfaq.htm
> > Post: mailto:DX4WIN@mailman.qth.net
> >
> > This list hosted by: http://www.qsl.net
> > Please help support this email list: http://www.qsl.net/donate.html
> __
> DX4WIN mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:DX4WIN@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html

-- 
~
DX4WIN logging software
Paul van der Eijk, KK4HD
BrookHill Data Systems LLC
http://www.dx4win.com
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Problem with DX spots window (my own fault)

[kostas sv1dpi]

Have you ticked boxes under

File>Preferences>Packet3 also?

73 Kostas SV1DPI

Στις 18/7/2019 04:19, ο Joe έγραψε:

A couple of days ago I accidently clicked the DX4WIN icon on my task bar
twice instead of once.  That put me into the DEMO mode, but it did more than
that.  When I exited and reopened with one click I was back to square one
and all my settings, preferences, windows, etc. were gone.  Strangely, the
data files in the save directory were still there.

  


Using some of the past backups, I was able to get everything back to normal
except for one thing:

  


Spots show up normally in the Packet Window and are transferred as usual to
the "DX spots (DXCC) Sorted by Time" window except that the preference for
every spot is 9 and therefore all the info for every spot is gray.

  


I have the appropriate frequency and mode boxes checked in both the
File>Preferences>Station tab and the File>Awards tab.  In
File>Preference>Packet the color scheme for DXCC is checked and there the
colors are normal.

  


I've tried the Help functions but don't see anything that addresses this
specific problem.

  


I'm sure it's a simple fix, but I haven't been able to figure it out.

  


Any help would be appreciated.

  


Tnx es 73,

  


Joe, K1JB

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Problem connecting a IC7600

[Mel SM0MPV]

Thanks for your suggestion Tibor.

I think something that the problem is the IC-7600 RIG file.

If I use ICOM 756 PRO III rig file and change the address to 7A Hex
everything works except if I press PSK on the radio, then the mode in the
log-window shows SSB. This is maybe how it should be if the PSK is
generated via the sound card in the rig.

I am not a programmer and can thus not compare the two RIG files.

Below I have added all the tests I have done and once again all settings
etc.

73 de Mel/SM0MPV

When I click on a spot in the band map or in the spot window the frequency
changes accordingly in the band map and in the logging window but after 1-2
s the frequency change back to the one seen on the radio. The mode has
changed both in the logging window and on the radio. However, if I change
the frequency or the mode on the rig it changes in DX4WIN. Thus, it is only
the communication of frequency from DX4WIN to the rig that does not work.

Everything works if I use N1MMplus or Ham Radio Delux.

I can connect to a Kenwood TS-590 with DX4WIN.

The problem remains if I connect another computer, this time with Windows
10 and 64-bit system.
N1MMplus works with IC-7600 and DX4WIN connection to the TS-590 works from
this computer.

I have changed cables and ports without success.

The remote jack (CI-V jack) has been both connected and unconnected to my
amplifier (SPE Expert 1K-FA) and it did not affect the result.

I have restarted the computer and the rig several times, but not in any
systematical way.

The Computer is A Dell Optiplex 980
Intel(R) Core(TM) i/ CPU  870 @ 2.93 GHz
RAM 12.0 GB (3.43 GB usable)
32-bit Operating system

Windows 7 Professional
Service Pack 1

DX4WIN v. 9.0.0.4.1176

Rig: ICOM IC-7600 connected to the USB-B port on the back
The latest firm ware installed

I have the latest driver for the port: Silicon Labs CP210x USB to UART
Bridge v. 6.7.0.0 2014-03-19.

COM-port Settings:
Baud rate: 9600 BPS
Data bits: 8
Parity: None
Stop bits: 1
Flow control: None

Rig settings:
CI-V baud rate: 9600
CI-V Address: 7Ah
CI-V Tranceive: OFF
CI-V OutPut (for ANT): OFF
USB Serial Function: CI-V

DX4WIN settings:
ICOM 7600 _K2DBK, i.e. ON4AOI except the filter.
There is no difference if I use IC7600_500Hz or IC7600_250Hz by ON4AOI.
Address: 7A
Baud Rate: 9600
COM port: COM6
Poll rate (ms): 1000
Max tries: 6
DTR high and RTS high ticked



Den fre 10 aug. 2018 kl 12:19 skrev Tibor M. Blum - IK2SAI -
 My scheme is very similar to yours: ic7600 connected via retro USB to PC
> and the SPE1.5K-FA connected to the IC7600 remote port.
> I have found the solution using the VSPE software. Instead to connect
> direct the ic7600 to a real com i conect it to a virtual port.
> You have just to switch on the radio as the first thing, than load the
> configuration of VSPE and, at this point (after have modified in the
> preferences dx4win from the real to the virtual radio port) load the dx4win.
> It takes just few second and it works great.
> VSPE software is free and it is not necessary at 100% to buy the licence.
> I bought the licence because, in this way, i can memorize the configuration
> of VSPE and at the start all is easier.
> So this is my configuration and it works 100%.
> In any case, give a try!
> Vy 73 de Tibor, IK2SAI
>
> -
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to arch...@mail-archive.com

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Problem connecting a IC7600

[Mel SM0MPV]

No, it doesn't.

Thanks for your comments David.

I have tried several things but the problems remains

When I click on a spot in the band map or in the spot window the frequency
changes accordingly in the band map and in the logging window but after 1-2
s the frequency change back to the one seen on the radio. The mode has
changed both in the logging window and on the radio. However, if I change
the frequency or the mode on the rig it changes in DX4WIN. Thus, it is only
the communication of frequency from DX4WIN to the rig that does not work.

Everything works if I use N1MMplus or Ham Radio Delux.

I can connect to a Kenwood TS-590 with DX4WIN.

The problem remains if I connect another computer, this time with Windows
10. N1MMplus and connection to the TS-590 works from this computer.

I have changed cables and ports without success.

The remote jack (CI-V jack) has been both connected and unconnected to my
amplifier (SPE Expert 1K-FA) and it did not affect the result.

I have restarted the computer and the rig several times, but not in any
systematical way.

Do you have any suggestions?

73 de Mel/SM0MPV




Rig: ICOM IC-7600 connected to the USB-B port on the back

I have the latest driver for the port: Silicon Labs CP210x USB to UART
Bridge v. 6.7.0.0 2014-03-19.

Windows 7 Professional

DX4WIN v. 9.0.0.4.1176

COM-port Settings:
Baud rate: 9600 BPS
Data bits: 8
Parity: None
Stop bits: 1
Flow control: None

Rig settings:
CI-V baud rate: 9600
CI-V Address: 7Ah
CI-V Tranceive: OFF
CI-V OutPut (for ANT): OFF
USB Serial Function: CI-V

DX4WIN settings:
ICOM 7600 _K2DBK, i.e. ON4AOI except the filter.
There is no difference if I use IC7600_500Hz or IC7600_250Hz by ON4AOI.
Address: 7A
Baud Rate: 9600
COM port: COM6
Poll rate (ms): 1000
Max tries: 6
DTR high and RTS high ticked


Den mån 6 aug. 2018 kl 20:16 skrev David Kozinn, K2DBK :

> Hi Mel,
>
>
>
> My any chance is there any other software running on your computer that
> might be trying to connect to your radio? The fact that it changes but then
> changes back seems strange. If it couldn’t connect at all that would be
> something to look at, but it looks like it does connect. I have the same
> USB to UART bridge as you do, and the only difference I can see is that I
> use Windows 10 Pro instead of Windows 7, but I do not believe that could be
> causing the problem.
>
>
>
> There are ways to trace traffic on a USB connection, but unless you are
> comfortable with that sort of thing I’d prefer to save that as a last
> resort.
>
>
>
> *From:* Mel SM0MPV 
> *Sent:* Monday, August 06, 2018 11:40 AM
> *To:* k2...@arrl.net
> *Cc:* dx4win 
> *Subject:* Re: [Dx4win] Problem connecting a IC7600
>
>
>
> Thanks David,
>
>
>
> I have just tested your RIG file too and I got the same result as earlier.
>
> What I see is that when I click on a spot o the band map the program
> changes frequency bet then very soon goes back to the first one. The
> callsign for the spoted station remains in the QSO window. When I turn the
> dial on the radio the frequency changes in the band map and in the QSO
> window in DX4WIN.
>
>
>
> I use the Silicon Labs CP210x USB to UART bridge
>
>
>
> I have the com port set to:
>
> Bits per second: 9600
>
> Parity: None
>
> Stop bits: 1
>
> Row control: None
>
> It is Windos 7 Professional I use
>
>
>
> The radio settings in DX4WIN are
>
> ICOM 7600 _K2DBK, i.e. ON4AOI except the filter.
>
> Address: 7A
>
> Baud Rate: 9600
>
> COM port: COM6
>
> Poll rate (ms): 1000
>
> Max tries: 6
>
> DTR high and RTS high marked
>
>
>
> I connect the the computer and the rig via an USB A and B cable
>
>
>
> The settings in the radio are:
>
> CI-V baud rate: 9600
>
> CI-V Address: 7Ah
>
> CI-V Tranceive: OFF
>
> CI-V OutPut (for ANT): OFF
>
> USB Serial Function: CI-V
>
>
>
> I will later connect my SPE Expert 1K-FA amplifier to the rig. Since it
> can just communicate with 9600 baud so I believe I am stucked with this
> baud rate. The communication goes between the remote (CI-V) jack on the rig
> and the RS 232  connection on the amplifier.
>
>
>
> 73 de Mel / SM0MPV
>
>
>
>
>
>
>
>
>
> Den lör 4 aug. 2018 kl 18:22 skrev David Kozinn, K2DBK :
>
> Hi Mel,
>
> I guess I have a couple of thoughts: Did you install the Icom USB driver?
> You're supposed to do that before ever plugging in the radio, although I'm
> not sure how important that is. I am guessing that you did since you said
> it
> works with N1MM. I have my baud rate set to 19200 and the CI-V address set
> to 7A. Here are the other settings since maybe this will help:
>
> CI-V Transceive: Off
> CI-V Output (for ANT): Off
> US

Re: [Dx4win] Problem connecting a IC7600

[Mel SM0MPV]

Thanks David,

I have just tested your RIG file too and I got the same result as earlier.
What I see is that when I click on a spot o the band map the program
changes frequency bet then very soon goes back to the first one. The
callsign for the spoted station remains in the QSO window. When I turn the
dial on the radio the frequency changes in the band map and in the QSO
window in DX4WIN.

I use the Silicon Labs CP210x USB to UART bridge

I have the com port set to:
Bits per second: 9600
Parity: None
Stop bits: 1
Row control: None
It is Windos 7 Professional I use

The radio settings in DX4WIN are
ICOM 7600 _K2DBK, i.e. ON4AOI except the filter.
Address: 7A
Baud Rate: 9600
COM port: COM6
Poll rate (ms): 1000
Max tries: 6
DTR high and RTS high marked

I connect the the computer and the rig via an USB A and B cable

The settings in the radio are:
CI-V baud rate: 9600
CI-V Address: 7Ah
CI-V Tranceive: OFF
CI-V OutPut (for ANT): OFF
USB Serial Function: CI-V

I will later connect my SPE Expert 1K-FA amplifier to the rig. Since it can
just communicate with 9600 baud so I believe I am stucked with this baud
rate. The communication goes between the remote (CI-V) jack on the rig and
the RS 232  connection on the amplifier.

73 de Mel / SM0MPV




Den lör 4 aug. 2018 kl 18:22 skrev David Kozinn, K2DBK :

> Hi Mel,
>
> I guess I have a couple of thoughts: Did you install the Icom USB driver?
> You're supposed to do that before ever plugging in the radio, although I'm
> not sure how important that is. I am guessing that you did since you said
> it
> works with N1MM. I have my baud rate set to 19200 and the CI-V address set
> to 7A. Here are the other settings since maybe this will help:
>
> CI-V Transceive: Off
> CI-V Output (for ANT): Off
> USB Serial Function: CI-V
>
> In DX4WIN, I have the poll rate set to 1000ms and Max tries set to 6.
>
> I've attached a copy of the RIG file that I use. It's basically the same as
> the standard 7600_500 except that I think I changed the filter to default
> to
> off.
>
>
> -Original Message-
> From: dx4win-boun...@mailman.qth.net  On
> Behalf Of Mel SM0MPV
> Sent: Saturday, August 04, 2018 5:53 AM
> To: dx4win 
> Subject: [Dx4win] Problem connecting a IC7600
>
> I have just bought an IC 7600 and have been struggling to get the
> communication between the computer and the rig to work.
>
> I us a Dell with XP professional 64 bits, DX4WIN 9.04 and have connected
> the
> rig with an USB-cable. I have an SPE Expert 1K-FA amplifier connected via
> ALC, Send and C-IV.
>
> All baud rates are set the same 9600 in DX4WIN, the com port, the rig and
> amplifier.
>
> I have tried to use both ICOM 7600_250Hz and the ICOM 7600_500Hz
>
> The program and rig do not match, when clicking on a spot or a spot from
> the
> band map. It seems like it is the frequencies that do not match, mode
> changes, but I have not tested this so much.
>
> When using N1MM everything works.
>
> Any suggestions what to do?
> --
> 73 de Mel - SM0MPV
> 8S0C - Contest Call
> __
> DX4WIN mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:DX4WIN@mailman.qth.net
> Message delivered to k2...@arrl.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>


-- 
73 de Mel - SM0MPV
8S0C - Contest Call

Claes 'Mel' Carneheim
Sagov. 3
SE-182 47 Enebyberg
SWEDEN
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to arch...@mail-archive.com

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Problem connecting a IC7600

[David Kozinn, K2DBK]

Hi Mel,

I guess I have a couple of thoughts: Did you install the Icom USB driver?
You're supposed to do that before ever plugging in the radio, although I'm
not sure how important that is. I am guessing that you did since you said it
works with N1MM. I have my baud rate set to 19200 and the CI-V address set
to 7A. Here are the other settings since maybe this will help:

CI-V Transceive: Off
CI-V Output (for ANT): Off
USB Serial Function: CI-V

In DX4WIN, I have the poll rate set to 1000ms and Max tries set to 6.

I've attached a copy of the RIG file that I use. It's basically the same as
the standard 7600_500 except that I think I changed the filter to default to
off.
 

-Original Message-
From: dx4win-boun...@mailman.qth.net  On
Behalf Of Mel SM0MPV
Sent: Saturday, August 04, 2018 5:53 AM
To: dx4win 
Subject: [Dx4win] Problem connecting a IC7600

I have just bought an IC 7600 and have been struggling to get the
communication between the computer and the rig to work.

I us a Dell with XP professional 64 bits, DX4WIN 9.04 and have connected the
rig with an USB-cable. I have an SPE Expert 1K-FA amplifier connected via
ALC, Send and C-IV.

All baud rates are set the same 9600 in DX4WIN, the com port, the rig and
amplifier.

I have tried to use both ICOM 7600_250Hz and the ICOM 7600_500Hz

The program and rig do not match, when clicking on a spot or a spot from the
band map. It seems like it is the frequencies that do not match, mode
changes, but I have not tested this so much.

When using N1MM everything works.

Any suggestions what to do?
--
73 de Mel - SM0MPV
8S0C - Contest Call
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to k2...@arrl.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to arch...@mail-archive.com

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] problem

[Paul van der Eijk]

Make sure you have at least one mode and one band selected in the station
preferences.

--Paul

On Mon, Feb 19, 2018 at 2:35 PM, smillick  wrote:

>
> My version  8 dx4win gives the error msg. Fixed Column size must be less
>> than column count. I must have hit the wrong button but can only bring up
>> the file entry but not the country zone or other windows. Cannot it out.
>> Will be updating in a couple of months. Thanks  K9SM
>>
> __
> DX4WIN mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:DX4WIN@mailman.qth.net
> Message delivered to pvandere...@gmail.com
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>



-- 
~
DX4WIN logging software
Paul van der Eijk, KK4HD
BrookHill Data Systems LLC
http://www.dx4win.com
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to arch...@mail-archive.com

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] problem

[Jim Reisert AD1C]

On Mon, Feb 19, 2018 at 12:35 PM, smillick K9SM wrote:

> My version  8 dx4win gives the error msg. Fixed Column size must be less
> than column count. I must have hit the wrong button but can only bring up
> the file entry but not the country zone or other windows. Cannot it out.
> Will be updating in a couple of months. Thanks  K9SM

Try deleting old packet spots (SAVE\DX4WIN.PUT).  If that doesn't fix
it, try deleting your config file (SAVE\DX4WIN.CFG).

-- 
Jim Reisert AD1C, , http://www.ad1c.us
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to arch...@mail-archive.com

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Problem with MMTTY Window

[Stephen R. Veader]

Well...

I found the answer...  During the CQ WPX this past weekend, I moved all 
the MMTTY windows to the second screen to give me more room on the main 
screen...  I normally leave the second screen turned off...  Yup as soon 
as I turned the screen on, there was the MMTTY screen...  All I had to 
do was to drag the MMTTY screen back to the main monitor...  Problem 
solved...


Glad to find out it wasn't anything to do with DX4Win, just a forgetful 
operator...


Steve, N4DXS

On 2/12/2018 4:53 PM, Stephen R. Veader wrote:

Need some help...

My MMTTY window has minimized and will not let me restore it... The 
RTTY window is fine and I can see the MMTTY program in the task bar 
but can not get the window to open.  RTTY window is still receiving 
and I am able to send but just no MMTTY scope..


Steve, N4DXS



__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to arch...@mail-archive.com

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Problem Accessing QRZ.COM

[Bruce Blackley]

I had the same problem.  Try hitting ALT F3.  Don't know why it was changed.
 
73
 
Bruce
WD4LBR 
 
 
 
 
---Original Message---
 
From: K. Scott Wood
Date: 1/2/2018 3:03:39 PM
To: dx4win@mailman.qth.net
Subject: [Dx4win] Problem Accessing QRZ.COM
 
Gentlemen,
 
I recently upgraded to DX4WIN 9.03.1160.  I am using Windows 10 and
operating with an Elecraft KX-3.  While operating I can automatically QSY to
DX Cluster spots, EAC.  Prior to upgrading, DX4WinI could also hit F3 and
get the Web page of the station I am working.  Not now, however.
 
I have gone to preferences, Ext. Date and entered http://www.qrz.com/db/
under the website callsign lookup.  No other information is entered on any
other window. I wonder what I am doing wrong.  Anyone out there that can set
me straight??
 
Your help will be appreciated.
 
Scott
 
K. Scott Wood, VE1QD Sent from my iPad
 
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to wd4...@embarqmail.com
 
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
 
---
This email has been checked for viruses by AVG.
http://www.avg.com
 
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to arch...@mail-archive.com

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Problem Accessing QRZ.COM

[n4qs]

Try Alt-F3.

Dave, N4QS

-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf Of K. Scott Wood
Sent: Tuesday, January 02, 2018 2:03 PM
To: dx4win@mailman.qth.net
Subject: [Dx4win] Problem Accessing QRZ.COM

Gentlemen,

I recently upgraded to DX4WIN 9.03.1160.  I am using Windows 10 and
operating with an Elecraft KX-3.  While operating I can automatically QSY to
DX Cluster spots, EAC.  Prior to upgrading, DX4WinI could also hit F3 and
get the Web page of the station I am working.  Not now, however.

I have gone to preferences, Ext. Date and entered http://www.qrz.com/db/
under the website callsign lookup.  No other information is entered on any
other window. I wonder what I am doing wrong.  Anyone out there that can set
me straight??

Your help will be appreciated.

Scott

K. Scott Wood, VE1QD Sent from my iPad

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to n...@vci.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to arch...@mail-archive.com

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Problem Accessing QRZ.COM

[Mike Cizek W0VTT]

Hello Scott,

Version 9 now supports XML data from QRZ and that uses F3.  For the old web
site lookup, use   On the Ext Data tab, make sure you also have QRZ
Online selected as your data source and have Website callsign lookup enabled
with the check in the little box.

-- 
73,
Mike Cizek WØVTT

-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf Of K. Scott Wood
Sent: Tuesday, January 02, 2018 14:03
To: dx4win@mailman.qth.net
Subject: [Dx4win] Problem Accessing QRZ.COM

Gentlemen,

I recently upgraded to DX4WIN 9.03.1160.  I am using Windows 10 and
operating with an Elecraft KX-3.  While operating I can automatically QSY to
DX Cluster spots, EAC.  Prior to upgrading, DX4WinI could also hit F3 and
get the Web page of the station I am working.  Not now, however.

I have gone to preferences, Ext. Date and entered http://www.qrz.com/db/
under the website callsign lookup.  No other information is entered on any
other window. I wonder what I am doing wrong.  Anyone out there that can set
me straight??

Your help will be appreciated.

Scott

K. Scott Wood, VE1QD Sent from my iPad

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to mgci...@gmail.com

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to arch...@mail-archive.com

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Problem update

[Jim Reisert AD1C]

> It appears that the call sign of the station I am working does not 
> automatically change unless I hit the icon next to it. The history is fine, 
> the sequence is not automatic.

If you mean in the F3 window, right-click and choose "Automatic Update"

-- 
Jim Reisert AD1C, , http://www.ad1c.us
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to arch...@mail-archive.com

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Problem with exporting LoTW

[Ian Fugler]

Hi, Sam

I upload to LOTW regularly as follows:

F8 (Search)

Date - enter the first date of the required export
- enter the last date of the required export.  Note this assumes
that you have the date set to Range.

File>Import/Export>ADIF

Say yes to the question as to whether to use the active filter for the
export.

Save the exported ADIF file somewhere 

Then use TQSL to upload that ADIF file.

It takes seconds and works fine

73, Ian G4IIY

-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf Of Sam Leslie - W4PK
Sent: 12 October 2017 18:15
To: dx4win@mailman.qth.net
Subject: [Dx4win] Problem with exporting LoTW

Hello everyone..

 

I have been having a problem with exporting to LoTW, and I am at my wit's
end trying to figure it out.  After the recent CQWW rtty test I imported my
log from n1mm+ and I was successful with over 1500 contacts being imported.
I selected the "set LoTW flag" when I did this, and indeed the LoTW flag was
set to "Y" for all these contacts.   When I then tried to export from DX4WIN
(8.5) for submission to the LoTW web site I got a message that only about
150 contacts were being exported.  I then aborted the export and clicked N
to "do you want to clear the upload flag".

 

All my contacts (1500+) still have the LoTW flag set to "Y" but now when I
try to export I get the message that "Exports finished, no QSOs were
written".

 

I then tried to set the "Filter" function by creating a new group with the
Date Filter box checked and of course the first and last dates entered.
This did not work either.  I know the answer is simple but for the life of
me I have not been able to find it.

 

What am I doing wrong?

 

Sam Leslie

w...@w4pk.com

 

Inch-by-inch life's a cinch, but yard-by-yard it is really hard

 

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

---
This email has been checked for viruses by AVG.
http://www.avg.com

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Problem with exporting LoTW

[Mike Cizek W0VTT]

Hello Sam,

Do any of those QSOs show a LoTW upload date?  Did you maybe have a filter
in place (looking for something in the log) when you did the export?  Try
doing a filter by date for the contest weekend and select LoTW > Clear LoTW
Upload Date (whether or not an upload date is showing) and try the export
again.  I agree it doesn't make sense.  If all else fails, you can always
sign and upload the ADIF file from N1MM with TQSL.

-- 
73,
Mike Cizek WØVTT

-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf Of Sam Leslie - W4PK
Sent: Thursday, October 12, 2017 12:15
To: dx4win@mailman.qth.net
Subject: [Dx4win] Problem with exporting LoTW

Hello everyone..

 

I have been having a problem with exporting to LoTW, and I am at my wit's
end trying to figure it out.  After the recent CQWW rtty test I imported my
log from n1mm+ and I was successful with over 1500 contacts being imported.
I selected the "set LoTW flag" when I did this, and indeed the LoTW flag was
set to "Y" for all these contacts.   When I then tried to export from DX4WIN
(8.5) for submission to the LoTW web site I got a message that only about
150 contacts were being exported.  I then aborted the export and clicked N
to "do you want to clear the upload flag".

 

All my contacts (1500+) still have the LoTW flag set to "Y" but now when I
try to export I get the message that "Exports finished, no QSOs were
written".

 

I then tried to set the "Filter" function by creating a new group with the
Date Filter box checked and of course the first and last dates entered.
This did not work either.  I know the answer is simple but for the life of
me I have not been able to find it.

 

What am I doing wrong?

 

Sam Leslie

w...@w4pk.com

 

Inch-by-inch life's a cinch, but yard-by-yard it is really hard

 

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Problem with DX4WIN 8.05

[Dan Violette]

How did you transfer?  If you IMPORTED to 8.05 from an export from another
major version, it would be another format and make sure you select the
correct filetype (.DX4WN8, .DX4WIN6, etc.).  I think 6 and 7 are the same.
DX4WIN8 changed the log.

Dan KI6X

-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf Of Carol Richards
Sent: Sunday, June 11, 2017 12:35 PM
To: dx4win@mailman.qth.net
Subject: [Dx4win] Problem with DX4WIN 8.05

Hello all,

When I transferred over to DX4WIN 8.05 on a win 7 machine, things are not
quite right. I had my contacts from my XP-machine saved on a flash drive. I
imported them to the WIN7 machine which has 8.05 on it. All 420K qsos
imported very nicely except for one problem...All of my qso info is gone;
i.e.; names, qth's, etc. Only the call sign and all the qsos related to the
call sign appear..Just no information.


Any thoughts?



Carol


__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Problem Getting DX4Win to work on a new computer

[David Kozinn, K2DBK]

Hi Carol,

I'd argue that yes, you should upgrade, but there is a simple solution:

I found this in the archive from Paul from January 2005:

Paul,

The example given was for winNT/XP. For Windows/98 there is a different
driver and destination directory. From the on-line help:

for Win/95/98:
Windows\System\Vichw11.vxd

for Win/NT/2000/XP:
WinNT\System32\Divers\Vichw11.sys

I made some modifications in 6.04 to see if we can eliminate the problem.

--Paul

The searchable mail archives are at 
http://www.mail-archive.com/dx4win@mailman.qth.net/ and are a great 
resource.


On 5/31/2017 4:52 PM, Carol Richards wrote:

Hello



After a long time using an XP computer, I upgraded to a windows 7 
computer for numerous reasons. Eventually I will upgrade to windows 
10. The problem...



I am using an older version of DX4WIN... version 6.02 and have the CD 
for it. That version worked fine on my XP and I was able to keep it 
current with the updater. I also upgraded the shack to an HP 6830 
printer and installed all the drivers. It works fine. Unfortunately 
when I tried to use the CD to put DX4WIN on the windows 7 machine, 
everything went well until I tried to run the program. I got the error 
message, " Port driver not found". Is it time for me to upgrade DX4WIN 
6.02 or is there a way to cure this error



Thanks,


Carol


__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html



--
73,
David, K2DBK
http://k2dbk.blogspot.com
http://k2dbk.com
twitter: @k2dbk

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] problem opening the rig ic-7100 rig file.

[Doug MM0BJA]

You need WinZip to unzip.

- Original Message - 
From: w...@earthlink.net

To: dx4win@mailman.qth.net
Sent: Saturday, February 01, 2014 8:53 AM
Subject: [Dx4win] problem opening the rig ic-7100 rig file.


got it downloaded, but can't unzip windows xp does not know what program 
created it?

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html 


__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Problem with report listing of German SDOK

[Jim Reisert AD1C]

On Mon, Jul 23, 2012 at 6:35 AM,  teijo.murtova...@netikka.fi wrote:

 I am using DX4Win 8.05 and dx4win.awd version 3.26.

 Whenever I try to generate a German Sonder-DOK report I wil get an
 error dialog that shows:
 An exception occurred! TAwardSystem.AddEntry
 (C:\dx4win_src\awdmgr.pas, line 558).

It's a bug in the award database.  Thanks for the reminder.  I'll try
to release a fix tonight.

- Jim

-- 
Jim Reisert AD1C, jjreis...@alum.mit.edu, http://www.ad1c.us
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Problem with report listing of German SDOK

[teijo . murtovaara]

Lainaus Jim Reisert AD1C jjreis...@alum.mit.edu:

 On Mon, Jul 23, 2012 at 6:35 AM,  teijo.murtova...@netikka.fi wrote:

 I am using DX4Win 8.05 and dx4win.awd version 3.26.

 Whenever I try to generate a German Sonder-DOK report I wil get an
 error dialog that shows:
 An exception occurred! TAwardSystem.AddEntry
 (C:\dx4win_src\awdmgr.pas, line 558).

 It's a bug in the award database.  Thanks for the reminder.  I'll try
 to release a fix tonight.

 - Jim

 --
 Jim Reisert AD1C, jjreis...@alum.mit.edu, http://www.ad1c.us


Thanks Jim for the prompt answer! The new award database seems to work  
now fine!

73 de Teijo, OH6NIO

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Problem w/ v 5.03

[Tom Johnson]

Thanks David. I have multiple logs, and shuffling through them solved the
problem and everything is working like it supposed to. Many thanks. You da
man. De Tom

-Original Message-
From: David Kozinn, K2DBK [mailto:k2...@arrl.net] 
Sent: Saturday, June 23, 2012 8:47 PM
To: Tom Johnson
Subject: Re: [Dx4win] Problem w/ v 5.03

Try creating a new log file and see if the other windows open. It sounds 
like maybe there's a problem with your log file.

Alternatively, if you have more than one log, try opening another log file.

On 6/23/2012 4:22 PM, Tom Johnson wrote:
 I was saving a QSO when a popup asked if I wanted to save the changes. I
 clicked yes, and the screen minimized itself to a small bar approximately
1
 inch x 6 inches. All visible is file radio help and the clock. I cannot
 expand this or modify it in any way. I have tried deleting and reloading
the
 program, reloading on another drive, doing a system restore and I still
get
 the small bar. The properties call for a large maximized screen. Does
anyone
 have any ideas? It has me whupped! Tnx

   

 Tom N4TJ

 __
 DX4WIN mailing list
 Home: http://mailman.qth.net/mailman/listinfo/dx4win
 Help: http://mailman.qth.net/mmfaq.htm
 Post: mailto:DX4WIN@mailman.qth.net

 This list hosted by: http://www.qsl.net
 Please help support this email list: http://www.qsl.net/donate.html




-- 
73,
David, K2DBK
http://k2dbk.blogspot.com
http://k2dbk.com
twitter: @k2dbk

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Problem with LOTW and DX4WIN listing comparison?

[Loren Hunt]

Jim,The problem with doing this is it wants to submit even for countries that 
have already been checked if they were submitted and checked as LoTW QSLs 
previously. I just had both a paper and LoTW awards completed last month so my 
new confirmed is under 25 or so. Everything else is marked as Checked. I 
un-clicked the LoTW box and did a Submission report. It came up with 66 new 
ones to submit. Doing it the other way around (LoTW selected and paper not) 
doesn't fare any better with 266 new ones...
What I thought was odd (even buggy) was that even if a band/mode was marked as 
checked in the DXCC award field DX4WIN still put it on the list if it had 
been checked as LoTW.
So I think this isn't what he was looking for. I think if you want to submit 
one or the other it is a manual operation. When I couldn't find a way to do 
it separate I just did them both at the same time.
By the way - I submitted the new style online form for my paper QSLs on the 
first day it was available. I had updated numbers on the LoTW page in less than 
2 weeks and my certificate in less than 3 weeks. So I like the new system. Good 
going DXCC awards team!
73Loren, AD6ZJ

No program.  But if you go into the Awards manager (File | Awards),
and on the DXCC tab, in the upper-left box, uncheck LoTW (so only QSL
is checked), and perform the DXCC submission, then DX4WIN will only
try to submit paper QSLs, even if you also have a LoTW confirmation.
That may or may not be what you want.

- Jim

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Problem with LOTW and DX4WIN listing comparison?

[Jim Reisert AD1C]

On Wed, May 2, 2012 at 10:28 PM, Loren Hunt AD6ZJ wrote:

 The problem with doing this is it wants to submit even for countries that 
 have already been checked if they were submitted and checked as LoTW QSLs 
 previously.

Not if you're running 8.05 - this was fixed in that version.  Once
checked, always checked, regardless of confirmation status.

-- 
Jim Reisert AD1C, jjreis...@alum.mit.edu, http://www.ad1c.us
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Problem with LOTW and DX4WIN listing comparison?

[Kostas Stamatis]

Jim AD1C has written (as usually) a utility for this.
See it here
http://dx4win.ad1c.us/lotw/index.html

73 Kostas sv1dpi

- Original Message - 
From: George goofy...@rochester.rr.com
To: dx4win@mailman.qth.net
Sent: Tuesday, May 01, 2012 2:54 PM
Subject: [Dx4win] Problem with LOTW and DX4WIN listing comparison?


 Is there a way to compare my LOTW confirmed matrix and the DX4WIN 
 listing
 to see what QSL cards I need to pull to have checked by my local card
 checker?
 The DX4WIN listing does not differentiate between LOTW and Card received
 confirmed.
 I think someone wrote a program to do this?
 Thanks.

 George  W2YJ



 __
 DX4WIN mailing list
 Home: http://mailman.qth.net/mailman/listinfo/dx4win
 Help: http://mailman.qth.net/mmfaq.htm
 Post: mailto:DX4WIN@mailman.qth.net

 This list hosted by: http://www.qsl.net
 Please help support this email list: http://www.qsl.net/donate.html 

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Problem with LOTW and DX4WIN listing comparison?

[Kostas Stamatis]

I prefer an automated solution on this and i hope Paul will have it in next 
version.
But until then with help of Jim's utility you can check only LotW confirmations 
to count for DXCC and make a submission. After that check only cards 
(fileawards) and make another submission. It should be work (at least with 805 
version)... or not?
Back to 7O6T pileup...
73 Kostas sv1dpi
  - Original Message - 
  From: Rick Murphy 
  To: Kostas Stamatis 
  Cc: REFLECTOR dx4win 
  Sent: Tuesday, May 01, 2012 9:34 PM
  Subject: Re: [Dx4win] Problem with LOTW and DX4WIN listing comparison?


  Kostas,
  I started to give the same reply, but that program does not do what George is 
asking for.


  What George wants is to make a DXCC submission that includes card-in-hand 
QSLs only. He would like a report from DX4WIN that includes just those cards, 
not including confirmations that might be covered by LoTW confirmations. 
  73,
  -Rick


  On Tue, May 1, 2012 at 1:00 PM, Kostas Stamatis sv1...@otenet.gr wrote:

Jim AD1C has written (as usually) a utility for this.
See it here
http://dx4win.ad1c.us/lotw/index.html

73 Kostas sv1dpi


- Original Message -
From: George goofy...@rochester.rr.com
To: dx4win@mailman.qth.net
Sent: Tuesday, May 01, 2012 2:54 PM
Subject: [Dx4win] Problem with LOTW and DX4WIN listing comparison?


 Is there a way to compare my LOTW confirmed matrix and the DX4WIN
 listing
 to see what QSL cards I need to pull to have checked by my local card
 checker?
 The DX4WIN listing does not differentiate between LOTW and Card received
 confirmed.
 I think someone wrote a program to do this?
 Thanks.

 George  W2YJ



 __
 DX4WIN mailing list
 Home: http://mailman.qth.net/mailman/listinfo/dx4win
 Help: http://mailman.qth.net/mmfaq.htm
 Post: mailto:DX4WIN@mailman.qth.net

 This list hosted by: http://www.qsl.net
 Please help support this email list: http://www.qsl.net/donate.html
-- 
Rick Murphy, CISSP-ISSAP, K1MU/4, Annandale VA USA

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Problem with LOTW and DX4WIN listing comparison?

[Jim Reisert AD1C]

On Tue, May 1, 2012 at 5:54 AM, George wrote:

 Is there a way to compare my LOTW confirmed matrix and the DX4WIN listing
 to see what QSL cards I need to pull to have checked by my local card
 checker?
 The DX4WIN listing does not differentiate between LOTW and Card received
 confirmed.
 I think someone wrote a program to do this?

No program.  But if you go into the Awards manager (File | Awards),
and on the DXCC tab, in the upper-left box, uncheck LoTW (so only QSL
is checked), and perform the DXCC submission, then DX4WIN will only
try to submit paper QSLs, even if you also have a LoTW confirmation.
That may or may not be what you want.

- Jim

-- 
Jim Reisert AD1C, jjreis...@alum.mit.edu, http://www.ad1c.us
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] problem changing award flags

[ALAN ZACK]

Please note, in order for Jim's link below to work add the letter L at the
end of the link:

http://dx4win.ad1c.us/appnotes/dxcc.htm   No workee

http://dx4win.ad1c.us/appnotes/dxcc.html  Now works FB


-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf Of Jim Reisert AD1C
Sent: Sunday, April 03, 2011 2:13 PM
To: Jeffrey Pawlan
Cc: dx4win@mailman.qth.net
Subject: Re: [Dx4win] problem changing award flags

On Sun, Apr 3, 2011 at 12:33 PM, Jeffrey Pawlan jpaw...@yahoo.com wrote:

 I tried doing this within Reports...Award FlagsChange Award Flags...
 DXCC Mixed, Band and Mode.Action = Submitted - Checked
 but for each and every possible combination the number 0 always appears
and dx4win will not allow me to change that.

The award flags don't work that way.

The only way to mark confirmed  QSOs as Submitted or Checked is to do
a DXCC Submission.

  Reports...Award FlagsChange Award Flags

This can only do one of two things.

1.  Change one award flag type to another (i.e. Submitted to Checked)

2.  Clear award flags.

Please read this application note from top to bottom, then read it again:

http://dx4win.ad1c.us/appnotes/dxcc.htm

-- 
Jim Reisert AD1C, jjreis...@alum.mit.edu, http://www.ad1c.us

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] problem changing award flags

[Roger D Johnson]

On 4/3/2011 2:33 PM, Jeffrey Pawlan wrote:
 I had converted and also entered around 1600 QSOs into dx4win and I am 
 current with all 8.05 files and updates.

 Because of the file conversion, I was only able to check the Confirmed box 
 appropriately for each QSO but I did not have the means of automatically 
 Confirming the DXCC award submissions for these (mixed, band, and mode).

 Every one of the confirmed QSOs was submitted to the ARRL by the manual card 
 checking process.  Now I want to accomplish the following logical operation 
 in dx4win but it is not working per the information in the support website:

 if  Cfrm = Y
 then set DXCC MIXED to c; DXCC BAND to c; DXCC MODE to c
 if Cfrm is not = Y then do nothing


 I tried doing this within Reports...Award FlagsChange Award Flags...
 DXCC Mixed, Band and Mode.Action = Submitted -  Checked
 but for each and every possible combination the number 0 always appears and 
 dx4win will not allow me to change that.

 I want to do this without going through the comparison to the lotw site.

 Is there a step I am missing or is it not currently possible?
 Changing 1600 records one by one is getting very tiring.

 73,

 Jeffrey Pawlan  WA6KBL

 __

Hi Jeff.

I think I might have been bitten by this too. If you have a QSO in the QSO 
window, the
program will only change that one! Hit F9 to clear the window and try again.

73, Roger

__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] problem changing award flags

[Jeffrey Pawlan]

--- On Sun, 4/3/11, Roger D Johnson n...@roadrunner.com wrote:
 Hi Jeff.
 
 I think I might have been bitten by this too. If you have a
 QSO in the QSO 
 window, the
 program will only change that one! Hit F9 to clear the
 window and try again.


I tried your suggestion and cleared the window and again attempted to use the 
award flag changer under reports but still the number is 0 and none of my 
records changed.

73,

Jeffrey


__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] problem changing award flags

[Jim Reisert AD1C]

On Sun, Apr 3, 2011 at 12:33 PM, Jeffrey Pawlan jpaw...@yahoo.com wrote:

 I tried doing this within Reports...Award FlagsChange Award Flags...
 DXCC Mixed, Band and Mode.Action = Submitted - Checked
 but for each and every possible combination the number 0 always appears and 
 dx4win will not allow me to change that.

The award flags don't work that way.

The only way to mark confirmed  QSOs as Submitted or Checked is to do
a DXCC Submission.

  Reports...Award FlagsChange Award Flags

This can only do one of two things.

1.  Change one award flag type to another (i.e. Submitted to Checked)

2.  Clear award flags.

Please read this application note from top to bottom, then read it again:

http://dx4win.ad1c.us/appnotes/dxcc.htm

-- 
Jim Reisert AD1C, jjreis...@alum.mit.edu, http://www.ad1c.us
__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Problem

[Rick Murphy]

On Thu, Mar 10, 2011 at 2:45 PM, Dick White white...@sbcglobal.net wrote:
 My club recently had a special event operation, W0C. It was logged on
 another computer using the N3FJP logger ACLog 3.0. The file reads
 AclADIF.adi. I do have the AClog 3.0 on my hard drive, but never use it.
 The log was sent to me in ADIF format. I have tried to import it to my
 DX4WIN log with no success. Of the 538 Q's I get just 214 of them in a new
 file that I created. Yes, I have one dummy call in the new log. No matter
 how I try to import the log it will not put all 538 calls in the log.

Are there any errors generated by DX4WIN when you try to import the adif file?

What you might be able to do is to open the adif file using a text
editor and look for a QSO that's not getting successfully imported.
Perhaps there's some field in the AClog file that DX4WIN doesn't
recognize. Once you identify the problem you can fix the log so it'll
import.

You could also see if there's some other format that AClog can use for
export that DX4WIN understands.
73,
-Rick

-- 
Rick Murphy, CISSP-ISSAP, K1MU/4, Annandale VA USA
__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Problem with Filter selection

[Lee Hallin]

Hi Bob,
 
 I think it has to do with your User Level.  Go to File - Preferences and 
look at the User Level.  It is likely Regular.  Try Advanced or Expert.  I 
think once you save the change, you need to exit DX4WIN and get back in for the 
change to take effect.
 
73, Lee  N7NU

 Bob Henderson b...@5b4agn.net 12/3/2010 9:55 AM 

Hi guys

I have needed to install DX4WIN on a different computer to the one I mostly
use.  The installation was successful but I find Files, Selection  Files,
Edit Group Names to be both greyed out.  No doubt there is some kind of
switch to enable these functions but despite a search I have failed to find
it.  The facility worked fine on my other computer.  Reading the electronic
manual hasn't so far led to a solution.  As I have used multiple calls in
one compound log, I need to filter on group names to make sense of cluster
input.

I would really appreciate some help in getting to the bottom of this.

Many thanks.

Bob, 5B4AGN
__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

!SIG:4cf92f2369562081415512!

__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Problem with DXCC submission

[k4ute]

I am having the same problem using xp pro. 



Dick K4UTE 




- Original Message - 
From: Lou Dietrich n...@roadrunner.com 
To: F 5 L I W' 'Alain f5...@yahoo.fr, dx4win@mailman.qth.net 
Sent: Monday, March 15, 2010 10:57:24 AM GMT -05:00 US/Canada Eastern 
Subject: Re: [Dx4win] Problem with DXCC submission 

Alain, 

Yes, I've found this as well...Paul knows about it...he thought it was a 
Windows 7/ DX4WIN problem... 

I emailed him and asked when it would be fixed but never got a response... 

It would seem to be an easy fix...but I haven't seen anything yet... 

73 

Lou N2TU 

-Original Message- 
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net] 
On Behalf Of Alain, F 5 L I W 
Sent: Monday, March 15, 2010 10:45 AM 
To: dx4win@mailman.qth.net 
Subject: [Dx4win] Problem with DXCC submission 

  
Hi, 
I want to make a DXCC submission and I find a strange thing (only for few 
days) : I make my DXCC submission and the list is OK. I close it and, when I 
reopen it, the list is empty. If I check my DXCC listing I can see the 
countries marked as S. 
In fact, I must clear submitted flags (change Award flags) and make a new 
DXCC submission to see the list of the QSL cards I must send to the ARRL. 
Before this problem I could make a DXCC submission, close it and reopen it 
with no problem (the list still full). 
Any idea ? 
  
73 


Alain, F5LIW 
Grid : JN27oe 
REF # 41548 - ARRL # 10138941 - 10-X # 50408 



       
__ 
Dx4win mailing list 
Home: http://mailman.qth.net/mailman/listinfo/dx4win 
Help: http://mailman.qth.net/mmfaq.htm 
Post: mailto:Dx4win@mailman.qth.net 

This list hosted by: http://www.qsl.net 
Please help support this email list: http://www.qsl.net/donate.html 

__ 
Dx4win mailing list 
Home: http://mailman.qth.net/mailman/listinfo/dx4win 
Help: http://mailman.qth.net/mmfaq.htm 
Post: mailto:Dx4win@mailman.qth.net 

This list hosted by: http://www.qsl.net 
Please help support this email list: http://www.qsl.net/donate.html 
__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Problem with adif to dx4win conversion

[Jim Reisert AD1C]

Sorry, Bill.  The instructions are unclear.  I'll fix the web just
after I hit the SEND button.

There is a Format selection box in the program (DX4WIN6 or DX4WIN8).
 The default is DX4WIN8, so you have to import using that format.  If
you change it to DX4WIN6 (because you're using an older version of
DX4WIN), then you have import in that format.

73 - Jim AD1C

On Wed, Jan 20, 2010 at 10:53 AM, Bill Barr, N4NX n...@comcast.net wrote:
 Ok, what did I do wrong?

 I downloaded Jim's latest conversion tool and tested it on a previous contest 
 ( ARRL RTTY ROUNDUP 2010 ).  My Contest logging software is WinTEST.  My 
 current version of DX4win is 8.03 ( Although I think I might have a problem 
 with it since I can't seem to access packet ).

 1. I moved my contest adif file to the save folder under 8.03.

 2. I started the conversion tool. and told it to use the format of DX4WIN6 ( 
 even though I am running dx4win version 8 ) .  Jim's instructions say to use 
 DX4WIN6 when importing?

 3.  The window in the conversion tool indicated that all my QSOs were 
 written, but it also listed every QSO in the log with a notation is missing 
 received data

 3.  I confirmed that the tool did create a .dxq file under the same save 
 folder.

 4. I then did an import into dx4win using the import/filters ID of DX4WIN6 ( 
 Again per instructions )  I used  overwrite current QSOs because I had 
 previously loaded this file into DX4WIn ( You might ask why I would do 
 this---The answer is because the original import did not populate the state 
 column, it only populated the received column with the state. )

 5.  The import result was that indeed it completed the import and the only 
 issue is now neither the state column or the received column is populated ( 
 Hence the original error message is missing received data.  The note column 
 was populated with the note I had entered into the conversion tool.

 What am I missing.  Any help appreciated.

 73
 Bill N4NX



-- 
Jim Reisert AD1C, jjreis...@alum.mit.edu, http://www.ad1c.us
__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Problem in DX4WIN v 7.07

[Isidro Acosta Hernández]

Hello Andy and the fellows in the reflector...

 I use DX4WIN v 7.07.
 Also has found out that it not correctly defines the country for the
 Russian stations with fraction.

 For example:

 UA0BA/3 - DX4WIN defines AsRus actually should be EuRus

 As should be if:

 UA0BA/1 - Eu Rus
 UA0BA/2 - Kaliningrad (UA2)
 UA0BA/3 - Eu Rus
 UA0BA/6 - Eu Rus

 UA0BA/8 - As Rus
 UA0BA/9 - As Rus
 UA0BA/0 - As Rus

 or:

 UA3AA/1 - Eu Rus
 UA3AA/2 - Kaliningrad (UA2)
 UA3AA/3 - Eu Rus
 UA3AA/4 - Eu Rus
 UA3AA/6 - Eu Rus

 UA3AA/8 - As Rus
 UA3AA/9 - As Rus
 UA3AA/0 - As Rus

I think UA0BA/3 should sign UA0BA/UA3, and UA3AA/9 should sign UA3AA/UA9.

A similarly, some times a EA station in the Canary Islanda sigs EA4xxx/8, 
but he/she should sign EA4xxx/EA8, or vice-versa.

73 de Isidro, EA8NQ
E-mail:  ea8...@hotmail.com   (remove the _ )


Visit the EA8NQ's web page (in Spanish):
http://ea8nq.ure.es


__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Problem with the F2 key

[Tonno Vahk]

Nope, there is still a problem in 8.03 with F2 key it seems to me.

When QSL Date is set then F2 Key DOES NOT DO ANYTHING ELSE THAN SET
CONFIRMED FLAG Y.

The box that previously appeared: Do you want to mark the QSL Label again
or something does not appear. Label is not marked Y and Method is not
Changed as it should be.

I have Mark for Printing Label checked, yes.

73
Tonno
Es5tv

-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf Of Kostas Stamatis
Sent: Thursday, January 07, 2010 7:15 AM
To: REFLECTOR dx4win
Subject: Re: [Dx4win] Problem with the F2 key

Joe it is a bug in 8.02
It has corrected in 8.03
Pleas download and install 8.03. It is free if you have 8.02
73 Kostas sv1dpi

- Original Message - 
From: Joe Stepansky k...@comcast.net
To: dx4win@mailman.qth.net
Sent: Thursday, January 07, 2010 5:35 AM
Subject: [Dx4win] Problem with the F2 key


I noticed that when I press the F2 key to log a QSL, DX4Win creates a new
 outgoing label for the QSO I just confirmed and for which I had originally
 sent a QSL (the QSL Date field has a date in it, indicating I've already
 printed a label).  I've gone through the preferences, and in the F2 Key 
 tab,
 only the box labeled Mark QSO as confirmed is checked, not the one 
 labeled
 Mark for printing a Label.  And on the QSO tab, the QSL card in the
 Label/Upl flag box isn't checked (I thought I'd like the auto label 
 feature,
 but for me it got annoying).  I've tested this with a number of QSOs for
 which I've already received QSLs (and had sent one previously), yet DX4Win
 keeps generating labels for those same QSOs.



 I'm using version 8.02.  In my prior life with version 7, if I received a
 QSL but hadn't yet sent one, pressing F2 would confirm the QSL and 
 generate
 a label.  If I'd already sent a QSL, it would just do the confirmation, 
 not
 produce another label.



 What am I missing?



 73, Joe KQ3F

 __
 Dx4win mailing list
 Home: http://mailman.qth.net/mailman/listinfo/dx4win
 Help: http://mailman.qth.net/mmfaq.htm
 Post: mailto:Dx4win@mailman.qth.net

 This list hosted by: http://www.qsl.net
 Please help support this email list: http://www.qsl.net/donate.html
 

__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Problem with the F2 key

[ON4AOI]

Tonno,
There is some logic behind this
If the qsldate was set means that qsl is sended already
Set again depends on mailed cutoff in preferences 

Guy ON4AOI

 -Oorspronkelijk bericht-
 Van: dx4win-boun...@mailman.qth.net [mailto:dx4win-
 boun...@mailman.qth.net] Namens Tonno Vahk
 Verzonden: donderdag 7 januari 2010 9:44
 Aan: 'Kostas Stamatis'; 'REFLECTOR dx4win'
 Onderwerp: Re: [Dx4win] Problem with the F2 key
 
 Nope, there is still a problem in 8.03 with F2 key it seems to me.
 
 When QSL Date is set then F2 Key DOES NOT DO ANYTHING ELSE THAN SET
 CONFIRMED FLAG Y.
 
 The box that previously appeared: Do you want to mark the QSL Label
 again
 or something does not appear. Label is not marked Y and Method is not
 Changed as it should be.
 
 I have Mark for Printing Label checked, yes.
 
 73
 Tonno
 Es5tv
 
 -Original Message-
 From: dx4win-boun...@mailman.qth.net [mailto:dx4win-
 boun...@mailman.qth.net]
 On Behalf Of Kostas Stamatis
 Sent: Thursday, January 07, 2010 7:15 AM
 To: REFLECTOR dx4win
 Subject: Re: [Dx4win] Problem with the F2 key
 
 Joe it is a bug in 8.02
 It has corrected in 8.03
 Pleas download and install 8.03. It is free if you have 8.02
 73 Kostas sv1dpi
 
 - Original Message -
 From: Joe Stepansky k...@comcast.net
 To: dx4win@mailman.qth.net
 Sent: Thursday, January 07, 2010 5:35 AM
 Subject: [Dx4win] Problem with the F2 key
 
 
 I noticed that when I press the F2 key to log a QSL, DX4Win creates a
 new
  outgoing label for the QSO I just confirmed and for which I had
 originally
  sent a QSL (the QSL Date field has a date in it, indicating I've
 already
  printed a label).  I've gone through the preferences, and in the F2
 Key
  tab,
  only the box labeled Mark QSO as confirmed is checked, not the one
  labeled
  Mark for printing a Label.  And on the QSO tab, the QSL card in
 the
  Label/Upl flag box isn't checked (I thought I'd like the auto label
  feature,
  but for me it got annoying).  I've tested this with a number of QSOs
 for
  which I've already received QSLs (and had sent one previously), yet
 DX4Win
  keeps generating labels for those same QSOs.
 
 
 
  I'm using version 8.02.  In my prior life with version 7, if I
 received a
  QSL but hadn't yet sent one, pressing F2 would confirm the QSL and
  generate
  a label.  If I'd already sent a QSL, it would just do the
 confirmation,
  not
  produce another label.
 
 
 
  What am I missing?
 
 
 
  73, Joe KQ3F
 
  __
  Dx4win mailing list
  Home: http://mailman.qth.net/mailman/listinfo/dx4win
  Help: http://mailman.qth.net/mmfaq.htm
  Post: mailto:Dx4win@mailman.qth.net
 
  This list hosted by: http://www.qsl.net
  Please help support this email list: http://www.qsl.net/donate.html
 
 
 __
 Dx4win mailing list
 Home: http://mailman.qth.net/mailman/listinfo/dx4win
 Help: http://mailman.qth.net/mmfaq.htm
 Post: mailto:Dx4win@mailman.qth.net
 
 This list hosted by: http://www.qsl.net
 Please help support this email list: http://www.qsl.net/donate.html
 
 __
 Dx4win mailing list
 Home: http://mailman.qth.net/mailman/listinfo/dx4win
 Help: http://mailman.qth.net/mmfaq.htm
 Post: mailto:Dx4win@mailman.qth.net
 
 This list hosted by: http://www.qsl.net
 Please help support this email list: http://www.qsl.net/donate.html

__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Problem with the F2 key

[Tonno Vahk]

Well, previously it was asking if I want to do it again and that is surely
the best way.

In my case it usually happens when bureau card has been sent and I receive
Direct request. Of course I would like to mark it again for QSL then and set
QSL mode to Direct.

73
tonno

-Original Message-
From: ON4AOI [mailto:on4...@skynet.be] 
Sent: Thursday, January 07, 2010 12:27 PM
To: 'Tonno Vahk'
Cc: dx4win@mailman.qth.net
Subject: RE: [Dx4win] Problem with the F2 key

Tonno,
There is some logic behind this
If the qsldate was set means that qsl is sended already
Set again depends on mailed cutoff in preferences 

Guy ON4AOI

 -Oorspronkelijk bericht-
 Van: dx4win-boun...@mailman.qth.net [mailto:dx4win-
 boun...@mailman.qth.net] Namens Tonno Vahk
 Verzonden: donderdag 7 januari 2010 9:44
 Aan: 'Kostas Stamatis'; 'REFLECTOR dx4win'
 Onderwerp: Re: [Dx4win] Problem with the F2 key
 
 Nope, there is still a problem in 8.03 with F2 key it seems to me.
 
 When QSL Date is set then F2 Key DOES NOT DO ANYTHING ELSE THAN SET
 CONFIRMED FLAG Y.
 
 The box that previously appeared: Do you want to mark the QSL Label
 again
 or something does not appear. Label is not marked Y and Method is not
 Changed as it should be.
 
 I have Mark for Printing Label checked, yes.
 
 73
 Tonno
 Es5tv
 
 -Original Message-
 From: dx4win-boun...@mailman.qth.net [mailto:dx4win-
 boun...@mailman.qth.net]
 On Behalf Of Kostas Stamatis
 Sent: Thursday, January 07, 2010 7:15 AM
 To: REFLECTOR dx4win
 Subject: Re: [Dx4win] Problem with the F2 key
 
 Joe it is a bug in 8.02
 It has corrected in 8.03
 Pleas download and install 8.03. It is free if you have 8.02
 73 Kostas sv1dpi
 
 - Original Message -
 From: Joe Stepansky k...@comcast.net
 To: dx4win@mailman.qth.net
 Sent: Thursday, January 07, 2010 5:35 AM
 Subject: [Dx4win] Problem with the F2 key
 
 
 I noticed that when I press the F2 key to log a QSL, DX4Win creates a
 new
  outgoing label for the QSO I just confirmed and for which I had
 originally
  sent a QSL (the QSL Date field has a date in it, indicating I've
 already
  printed a label).  I've gone through the preferences, and in the F2
 Key
  tab,
  only the box labeled Mark QSO as confirmed is checked, not the one
  labeled
  Mark for printing a Label.  And on the QSO tab, the QSL card in
 the
  Label/Upl flag box isn't checked (I thought I'd like the auto label
  feature,
  but for me it got annoying).  I've tested this with a number of QSOs
 for
  which I've already received QSLs (and had sent one previously), yet
 DX4Win
  keeps generating labels for those same QSOs.
 
 
 
  I'm using version 8.02.  In my prior life with version 7, if I
 received a
  QSL but hadn't yet sent one, pressing F2 would confirm the QSL and
  generate
  a label.  If I'd already sent a QSL, it would just do the
 confirmation,
  not
  produce another label.
 
 
 
  What am I missing?
 
 
 
  73, Joe KQ3F
 
  __
  Dx4win mailing list
  Home: http://mailman.qth.net/mailman/listinfo/dx4win
  Help: http://mailman.qth.net/mmfaq.htm
  Post: mailto:Dx4win@mailman.qth.net
 
  This list hosted by: http://www.qsl.net
  Please help support this email list: http://www.qsl.net/donate.html
 
 
 __
 Dx4win mailing list
 Home: http://mailman.qth.net/mailman/listinfo/dx4win
 Help: http://mailman.qth.net/mmfaq.htm
 Post: mailto:Dx4win@mailman.qth.net
 
 This list hosted by: http://www.qsl.net
 Please help support this email list: http://www.qsl.net/donate.html
 
 __
 Dx4win mailing list
 Home: http://mailman.qth.net/mailman/listinfo/dx4win
 Help: http://mailman.qth.net/mmfaq.htm
 Post: mailto:Dx4win@mailman.qth.net
 
 This list hosted by: http://www.qsl.net
 Please help support this email list: http://www.qsl.net/donate.html

__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Problem with mode selection

[Jim Reisert AD1C]

This seems to be a common problem.  Surely someone else has solved this! 
  Did you check the reflector archives?

73 - Jim AD1C

On 11/7/2009 10:43 AM, Dan wrote:

 When I click on a dx spot or when I click on a station on the band map, the 
 radio jumps to the correct frequency and mode..on all bands but 30 meters.

 On 30 meters it jumps to the right frequency, but always sets the mode to SSB 
 instead of CW.

 I've looked through the menus and preference screens, but I can't find a 
 place to change the mode selection.

 My radio is an Elecraft K3, and the DX4WIN version is 8.02.

 Thanks in advance for any suggestions you may have.

 Dan - W4TQ


-- 
Jim Reisert AD1C, jjreis...@alum.mit.edu, http://www.ad1c.us
__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Problem with ext data

[Mel]

%20 is a Space character...
you must have added a space after the  last 

Ruddy Dettmaring wrote:
 I have putted in the webside Callsign lookup follow adress:
 http://www.qrz.com/db/ http://www.qrz.com/db/%3ccallsign callsign (Setup
 Parameters - Ext data)
 
 When I push F3 and than Enter if have a link to qrz.com but also with the
 failure: 
 
 The search for /db/%20FT5GA produced no results.
 
 %20FT5GA does not appear to be a valid callsign.
 
 What do I wrong?
 
 Has someone experience with it?
 
 Thanks for advice
 
 Regards,
 
 Ruddy - ON7DR
 
  
 
 ON7DR  -  OT7DR
 
 Ruddy Dettmaring
 
 Linde 4
 
 9940 Sleidinge
 
 Belgium
 
  mailto:ruddy.dettmar...@telenet.be ruddy.dettmar...@telenet.be
 
 Tel:09-324 63 08
 
 Fax:   09-329 37 63
 
 GSM: 0476-970 382
 
  
 
 __
 Dx4win mailing list
 Home: http://mailman.qth.net/mailman/listinfo/dx4win
 Help: http://mailman.qth.net/mmfaq.htm
 Post: mailto:Dx4win@mailman.qth.net
 
 This list hosted by: http://www.qsl.net
 Please help support this email list: http://www.qsl.net/donate.html
 
__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Problem with ext data

[Mel]

oops... that would be a space after /db/

I should re-read my posts before I hit send ;-)

Mel wrote:
 %20 is a Space character...
 you must have added a space after the  last 
 
 Ruddy Dettmaring wrote:
 I have putted in the webside Callsign lookup follow adress:
 http://www.qrz.com/db/ http://www.qrz.com/db/%3ccallsign callsign (Setup
 Parameters - Ext data)

 When I push F3 and than Enter if have a link to qrz.com but also with the
 failure: 

 The search for /db/%20FT5GA produced no results.

 %20FT5GA does not appear to be a valid callsign.

 What do I wrong?

 Has someone experience with it?

 Thanks for advice

 Regards,

 Ruddy - ON7DR

  

 ON7DR  -  OT7DR

 Ruddy Dettmaring

 Linde 4

 9940 Sleidinge

 Belgium

  mailto:ruddy.dettmar...@telenet.be ruddy.dettmar...@telenet.be

 Tel:09-324 63 08

 Fax:   09-329 37 63

 GSM: 0476-970 382

  

 __
 Dx4win mailing list
 Home: http://mailman.qth.net/mailman/listinfo/dx4win
 Help: http://mailman.qth.net/mmfaq.htm
 Post: mailto:Dx4win@mailman.qth.net

 This list hosted by: http://www.qsl.net
 Please help support this email list: http://www.qsl.net/donate.html

 __
 Dx4win mailing list
 Home: http://mailman.qth.net/mailman/listinfo/dx4win
 Help: http://mailman.qth.net/mmfaq.htm
 Post: mailto:Dx4win@mailman.qth.net
 
 This list hosted by: http://www.qsl.net
 Please help support this email list: http://www.qsl.net/donate.html
 
__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Problem with incorrect QSL manager info

[Mel]

Thanks all for the explanation.

I must say I prefer the way my old logger handled this. Changing a QSL 
manager in the log automatically updated the QSL manager info by 
creating a new entry and start date.

Perhaps Paul might consider changing this at some point. It would be a 
lot more convenient.

Alan Zack wrote:
 What ever is in the QSL Managers database will over ride anything you 
 type in the QSL Managers box. You need to open and modify this QSL 
 Managers data base to add the correct QSL Mgr for the time frame of the 
 contact once you are sure you have the correct info.
 
 I had the same problem with H44MY so I changed the QSL MGR database. It 
 was showing JA0IXW who used the call H44MY in 2004 and before.
 
 I hope I am doing this myself correctly. What I do is open the QSL Mgr 
 database. Line 1 is always blank. There I enter H44MY and left click on 
 the DATE column (TAB won't work). That causes H44MY to jump to a new 
 line in alphabetical order just after H44MX (in my database anyway). 
 Then in the next column I enter the effective date. In the case of H44MY 
 I don't know the exact date, QRZ.COM just says from Nov 2008 onward use 
 OM2SA, so I entered 11/01/2008. Then in the next column I entered OM2SA. 
 Then I click on SAVE CHANGES AND EXIT. Now, any QSO with H44MY after 
 11/01/2008 will show OM2SA as the QSL MGR.
 
 Hope this works for you and hope that is the correct way of doing it. I 
 am open to any suggestions or comments.
 
 GL  73
 Alan, K7ACZ
 
 
 
 Alan Zack
 Amateur Radio Station K7ACZ
 Official USCG Auxiliary Comm Station
 Las Vegas, Nevada, USA
 Delta Rocket Quality Engineer, The Boeing Company, Retired
 Aviation Chief Warrant Officer,  U.S. Coast Guard, Retired
 http://www.geocities.com/k7acz
 http://gocoastguard.com
 http://www.uscgradio.net
 http://www.comm-one.org
 ---
 
 - Original Message - 
 From: k...@cox.net
 To: Dx4win@mailman.qth.net
 Sent: Saturday, September 19, 2009 1:56 PM
 Subject: [Dx4win] Problem with incorrect QSL manager info
 
 
 Hi folks,

 I've run into a problem which I have no idea how to solve.  Here's the 
 situation:

 I worked H44MY for a new entity on 30M.  Entered all the info I had 
 and found out that the QSL manager callsign I put in the log was 
 wrong.  Tried to fix it, but although the program will allow me to 
 enter another callsign in the QSL Manager box, when I save it nothing 
 happens to change the QSL manager callsign.  I've tried it on two 
 machines, same problem.  Same thing with deleting the QSO and then 
 entering off-line -- no joy.  Shut off the computer, restarted, still 
 no joy.

 Ideas are MORE than welcome.  I put the correct callsign (OM2SA) in 
 the notes area, and that's fine, but it really ought to go into the 
 QSL manager block, I would think.  It would also make it a little 
 easier when I print labels for the cards.

 Thanks, in advance, for your help and very 73,

 Karl, K1KO
 Virginia Beach
 __
 Dx4win mailing list
 Home: http://mailman.qth.net/mailman/listinfo/dx4win
 Help: http://mailman.qth.net/mmfaq.htm
 Post: mailto:Dx4win@mailman.qth.net

 This list hosted by: http://www.qsl.net
 Please help support this email list: http://www.qsl.net/donate.html

 
 
 __
 Dx4win mailing list
 Home: http://mailman.qth.net/mailman/listinfo/dx4win
 Help: http://mailman.qth.net/mmfaq.htm
 Post: mailto:Dx4win@mailman.qth.net
 
 This list hosted by: http://www.qsl.net
 Please help support this email list: http://www.qsl.net/donate.html
 
__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Problem with incorrect QSL manager info

[Jim Reisert AD1C]

On 9/20/2009 4:24 AM, Mel wrote:

 I must say I prefer the way my old logger handled this. Changing a QSL
 manager in the log automatically updated the QSL manager info by
 creating a new entry and start date.

That *is* how DX4WIN works, and is how DX4WIN has worked for all versions.

As I explained, the one problem you can into is if you typo the QSL 
manager somehow, then enter a new manager FOR THE SAME DATE, where the 
manager's call is alphabetically LATER than the busted call. In this one 
case, you need to edit the QSL manager database by hand.

73 - Jim AD1C

-- 
Jim Reisert AD1C, jjreis...@alum.mit.edu, http://www.ad1c.us
__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Problem with incorrect QSL manager info

[Mel]

Thanks Jim... that was the way I thought it worked... but my 
misunderstanding of the problem had me convinced I was confusing it with 
Logic (which works the same way). Thanks for the clarification.

Jim Reisert AD1C wrote:
 On 9/20/2009 4:24 AM, Mel wrote:
 
 I must say I prefer the way my old logger handled this. Changing a QSL
 manager in the log automatically updated the QSL manager info by
 creating a new entry and start date.
 
 That *is* how DX4WIN works, and is how DX4WIN has worked for all versions.
 
 As I explained, the one problem you can into is if you typo the QSL 
 manager somehow, then enter a new manager FOR THE SAME DATE, where the 
 manager's call is alphabetically LATER than the busted call. In this one 
 case, you need to edit the QSL manager database by hand.
 
 73 - Jim AD1C
 
__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Problem with incorrect QSL manager info

[Jim Reisert AD1C]

On Sat, Sep 19, 2009 at 2:56 PM,  k...@cox.net wrote:

 I worked H44MY for a new entity on 30M.  Entered all the info I had and found 
 out that the QSL manager callsign I put in the log was wrong.  Tried to fix 
 it, but although the program will allow me to enter another callsign in the 
 QSL Manager box, when I save it nothing happens to change the QSL manager 
 callsign.

The simple answer is that if there are two managers for the same call
and date, the first one alphabetically is the one that DX4WIN shows.

You can go to File | Databases | QSL Managers to remove the bad one.
Read the help file for hints on how to delete an entry from the
database.

73 - Jim AD1C

-- 
Jim Reisert AD1C, jjreis...@alum.mit.edu, http://www.ad1c.us
__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Problem with incorrect QSL manager info

[Alan Zack]

What ever is in the QSL Managers database will over ride anything you 
type in the QSL Managers box. You need to open and modify this QSL 
Managers data base to add the correct QSL Mgr for the time frame of the 
contact once you are sure you have the correct info.

I had the same problem with H44MY so I changed the QSL MGR database. It 
was showing JA0IXW who used the call H44MY in 2004 and before.

I hope I am doing this myself correctly. What I do is open the QSL Mgr 
database. Line 1 is always blank. There I enter H44MY and left click on 
the DATE column (TAB won't work). That causes H44MY to jump to a new 
line in alphabetical order just after H44MX (in my database anyway). 
Then in the next column I enter the effective date. In the case of H44MY 
I don't know the exact date, QRZ.COM just says from Nov 2008 onward use 
OM2SA, so I entered 11/01/2008. Then in the next column I entered OM2SA. 
Then I click on SAVE CHANGES AND EXIT. Now, any QSO with H44MY after 
11/01/2008 will show OM2SA as the QSL MGR.

Hope this works for you and hope that is the correct way of doing it. I 
am open to any suggestions or comments.

GL  73
Alan, K7ACZ



Alan Zack
Amateur Radio Station K7ACZ
Official USCG Auxiliary Comm Station
Las Vegas, Nevada, USA
Delta Rocket Quality Engineer, The Boeing Company, Retired
Aviation Chief Warrant Officer,  U.S. Coast Guard, Retired
http://www.geocities.com/k7acz
http://gocoastguard.com
http://www.uscgradio.net
http://www.comm-one.org
---

- Original Message - 
From: k...@cox.net
To: Dx4win@mailman.qth.net
Sent: Saturday, September 19, 2009 1:56 PM
Subject: [Dx4win] Problem with incorrect QSL manager info


 Hi folks,

 I've run into a problem which I have no idea how to solve.  Here's the 
 situation:

 I worked H44MY for a new entity on 30M.  Entered all the info I had 
 and found out that the QSL manager callsign I put in the log was 
 wrong.  Tried to fix it, but although the program will allow me to 
 enter another callsign in the QSL Manager box, when I save it nothing 
 happens to change the QSL manager callsign.  I've tried it on two 
 machines, same problem.  Same thing with deleting the QSO and then 
 entering off-line -- no joy.  Shut off the computer, restarted, still 
 no joy.

 Ideas are MORE than welcome.  I put the correct callsign (OM2SA) in 
 the notes area, and that's fine, but it really ought to go into the 
 QSL manager block, I would think.  It would also make it a little 
 easier when I print labels for the cards.

 Thanks, in advance, for your help and very 73,

 Karl, K1KO
 Virginia Beach
 __
 Dx4win mailing list
 Home: http://mailman.qth.net/mailman/listinfo/dx4win
 Help: http://mailman.qth.net/mmfaq.htm
 Post: mailto:Dx4win@mailman.qth.net

 This list hosted by: http://www.qsl.net
 Please help support this email list: http://www.qsl.net/donate.html
 


__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Problem upgrading to 8.02?

[Jim Reisert AD1C]

On Wed, Sep 9, 2009 at 12:33 PM, Dick Flanagan d...@k7vc.com wrote:

 At 12:27 PM 9/9/2009, george wrote:

  I downloaded the current version of DX4WIN, 8.02. I followed the notes to a
  tee and when I start the program it still says 8.01???

 It sounds like you are using an old shortcut that still points to the
 old 8.01.  Go directly to the new dx4w802 directory and click on the
 executable there to see if you still get an indication of 8.01

Hi George,

If you didn't change the defaults when you installed the upgrade,
there should be a DX4WIN 8.02 folder in your Start | All Programs
menu.  Click on that folder, then click on the dx4win icon inside
it.

Each DX4WIN #.## folder has the same dx4win icon.  In your Start
menu, showing most recently used programs, it's easy to temporarily
have two dx4win icons, one pointing to an old version and one
pointing to a new version.  If you hover the mouse over the icon
without selecting it, you'll see the Location for that icon, which
will help you determine whether you're selecting the correct one.

On my systems, when I see the dx4win icon, I right-click on it and
rename it to (for example), DX4WIN 8.02.

73 - Jim AD1C

-- 
Jim Reisert AD1C, jjreis...@alum.mit.edu, http://www.ad1c.us
__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Problem upgrading to 8.02?

[Dick Flanagan]

At 12:27 PM 9/9/2009, george wrote:
 I downloaded the current version of DX4WIN, 8.02. I followed the notes to a
 tee and when I start the program it still says 8.01???

It sounds like you are using an old shortcut that still points to the 
old 8.01.  Go directly to the new dx4w802 directory and click on the 
executable there to see if you still get an indication of 8.01

Dick
--
Dick Flanagan K7VC
d...@k7vc.com


__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Problem upgrading to 8.02?

[george]

Thanks guys. Seems like when one puts their head together with the experts 
helping things work out.
I'm now on 8.02.
I have the world map window up but no map in it but this is not a show 
stopper.
Thanks again!
George W2YJ 

__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Problem with F2 logic.

[Jim Reisert AD1C]

On Fri, Aug 28, 2009 at 8:45 PM, Mel ve...@videotron.ca wrote:

 If Set QSL date to today when confirming is checked in F2 preferences.

 When you press F2 to confirm a QSO it will pop up a dialog
 QSL was already sent. Mark again? even though the QSO was never QSLed.
 What is even more troubling is: if you reply  No then the QSO
 indicates a QSL was sent even though it never was. It is as if the QSL
 date is set to the current date prior to checking if it was already sent.

Same here.

-- 
Jim Reisert AD1C, jjreis...@alum.mit.edu, http://www.ad1c.us
__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Problem with uploading flags

[Jim Reisert AD1C]

You do NOT need to import your log.  Just copy the .DXL file from the
old version's SAVE directory to the new version's SAVE directory.

See this web page:

http://dx4win.ad1c.us/appnotes/upgrade.htm

73 - Jim AD1C

On Thu, Aug 6, 2009 at 5:34 PM, Ricardo Navarretericardoea...@gmail.com wrote:
 Hello,

 I have updated to 8.0 versión and after export my old 7.03 version logbook
 into adif, I have imported it to 8.0 but now ALL qsl print, uploading flags
 for LoTW and e-qsl are active again, when I try to upload the new qso's
 made, I upload all the log again Please any help ,? am  I missing
 something when I import the log ???

 Thanks

 Rick EA4ZK

-- 
Jim Reisert AD1C, jjreis...@alum.mit.edu, http://www.ad1c.us
__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Problem with Spots showing in DX window

[Kostas SV1DPI]

I had noticed this in past. A Greek friend from another city invited me to 
use his new cluster (2-3 years ago). I was connected but i realized that 
that the spots coming in to the packet window on DX4WIN were not all showing 
up in the DX spots window. I thouth that the problem is his so i told him 
the problem. He couldn't do anything to correct it and i stopped to use his 
node... I don't know what software he was running. I know that i have not 
problem when i am connected to ab5k or aa2mf. No problem with ad1c node in 
past also

73 Kostas sv1dpi


- Original Message - 
From: Karl Oyster [EMAIL PROTECTED]

To: DX4WIN Dx4win@mailman.qth.net
Sent: Sunday, August 10, 2008 5:55 AM
Subject: [Dx4win] Problem with Spots showing in DX window



Hi, folks...

Ran into a strange problem this evening.  I noticed that the spots coming 
in to the packet window on DX4WIN were not all showing up in the DX spots 
window. Watched a little more closely and realized that when I queried the 
cluster for DX spots (sh/dx/20) the DX spots window would reflect all the 
spots shown in the packet/internet window.  However, as further spots came 
in later, as reflected in the packet/internet window, they were NOT shown 
in the DX spots window.  Tried it several different ways (DX spot window 
by time of arrival, precedence, etc.) and it made no difference.


Anybody care to enlighten me on this?  It's the first time I ever noticed 
this, but I can't be certain that it's never happened before. 
Incidentally, I have the level set for Expert, so I know that shouldn't 
be the problem.


Thanks, in advance, for your input.

73,

Karl, K1KO
Virginia Beach, VA
___
Dx4win mailing list
Dx4win@mailman.qth.net
http://mailman.qth.net/mailman/listinfo/dx4win





___
Dx4win mailing list
Dx4win@mailman.qth.net
http://mailman.qth.net/mailman/listinfo/dx4win

Re: [Dx4win] Problem with Spots showing in DX window

[Paul van der Eijk]

Karl,

Configure packet not to ignore the 'Gray' spots.

Increase the spotting window capacity to a few hundred

Clear the Prefixes/Zones for spotters

Get a bunch of spots; they should be visible.

Change the field Prefixes/Zones to something like: #3,#4,#5

Note that this filters on the spotters, not the station being spotted
and see what happens. When you sort the spots by priority, the
changes become apparent and should be easy to verify.

--Paul

Karl Oyster wrote:

Paul,

I'm using K3NC (dx.k3nc.com), which is a VE7CCC-using node.  I have 
found that when I have no filters set, the spots work fine. If, 
however, I have the dx band-mode filter engaged, either to receive 
spots only from North American or only from the New England area and 
down the Atlantic coast to North Carolina, I get no spots showing up 
in the DX spotting window.  Interestingly, when I have the band-mode 
filter and/or the filters to show spots only from North America (or 
from the New England area), I still get spots from foreign stations 
spotting either North American stations or stations from other 
continents.


I have had this problem in the past and I thought it was an issue with 
the node, but it may not be the node -- I'm really not sure at this 
point.  I have used the filters I have set up on other nodes and never 
noticed any problem with them, so it's kind of a toss-up I guess.


I hope this will help you to figure out what's going on.  Please let 
me know what you find out.


73,

Karl, K1KO

No virus found in this incoming message.
Checked by AVG - http://www.avg.com Version: 8.0.138 / Virus Database: 
270.6.0/1602 - Release Date: 8/9/2008 1:22 PM






___
Dx4win mailing list
Dx4win@mailman.qth.net
http://mailman.qth.net/mailman/listinfo/dx4win

Re: [Dx4win] Problem with Spots showing in DX window

[Neal Campbell]

Karl

What are you using to set the filter commands, manually or via a
program? If manually or macro, let me know what it is so I can verify
its not my node!

73
Neal k3nc

On Sun, Aug 10, 2008 at 7:36 PM, Paul van der Eijk [EMAIL PROTECTED] wrote:
 Karl,

 Configure packet not to ignore the 'Gray' spots.

 Increase the spotting window capacity to a few hundred

 Clear the Prefixes/Zones for spotters

 Get a bunch of spots; they should be visible.

 Change the field Prefixes/Zones to something like: #3,#4,#5

 Note that this filters on the spotters, not the station being spotted
 and see what happens. When you sort the spots by priority, the
 changes become apparent and should be easy to verify.

 --Paul

 Karl Oyster wrote:

 Paul,

 I'm using K3NC (dx.k3nc.com), which is a VE7CCC-using node.  I have found
 that when I have no filters set, the spots work fine. If, however, I have
 the dx band-mode filter engaged, either to receive spots only from North
 American or only from the New England area and down the Atlantic coast to
 North Carolina, I get no spots showing up in the DX spotting window.
  Interestingly, when I have the band-mode filter and/or the filters to show
 spots only from North America (or from the New England area), I still get
 spots from foreign stations spotting either North American stations or
 stations from other continents.

 I have had this problem in the past and I thought it was an issue with the
 node, but it may not be the node -- I'm really not sure at this point.  I
 have used the filters I have set up on other nodes and never noticed any
 problem with them, so it's kind of a toss-up I guess.

 I hope this will help you to figure out what's going on.  Please let me
 know what you find out.

 73,

 Karl, K1KO

 No virus found in this incoming message.
 Checked by AVG - http://www.avg.com Version: 8.0.138 / Virus Database:
 270.6.0/1602 - Release Date: 8/9/2008 1:22 PM




 ___
 Dx4win mailing list
 Dx4win@mailman.qth.net
 http://mailman.qth.net/mailman/listinfo/dx4win




-- 
Neal Campbell
Abroham Neal Software
Programming Services for Windows, OS X and Linux
(540) 242 0911
-
Try Spot for OS X, the intelligent DXCluster Client at
www.abrohamnealsoftware.com - introduction priced at $10.99
-
For a great dog book, visit www.abrohamneal.com
-
See the FlexRadio Systems Flex-5000a in
action at www.flex-videos.com
___
Dx4win mailing list
Dx4win@mailman.qth.net
http://mailman.qth.net/mailman/listinfo/dx4win

Re: [Dx4win] Problem with Spots showing in DX window

[Jim Reisert AD1C]

What is the time spot of the latest spots shown in the DX Spots window?

For clusters that don't include the date in the SH/DX output, you can 
get old spots that appear newer.  For example, at 0010z, you do a 
sh/dx/100.  You get spots from 2345z to 0010z.  If the spots don't have 
the date in them, then the spots from 2345z are considered today even 
though they are from yesterday.


But this is just a guess as to your problem.

What cluster node are you connected to and what software is it running 
(i.e. CC, AR, Spider, etc.)?  Have you tried changing nodes?


Does clearing all the spots from the window make things work again?

73 - Jim AD1C

On 8/9/2008 8:55 PM, Karl Oyster wrote:

Hi, folks...

Ran into a strange problem this evening.  I noticed that the spots 
coming in to the packet window on DX4WIN were not all showing up in the 
DX spots window. Watched a little more closely and realized that when I 
queried the cluster for DX spots (sh/dx/20) the DX spots window would 
reflect all the spots shown in the packet/internet window.  However, as 
further spots came in later, as reflected in the packet/internet window, 
they were NOT shown in the DX spots window.  Tried it several different 
ways (DX spot window by time of arrival, precedence, etc.) and it made 
no difference.


Anybody care to enlighten me on this?  It's the first time I ever 
noticed this, but I can't be certain that it's never happened before.  
Incidentally, I have the level set for Expert, so I know that 
shouldn't be the problem.



--
Jim Reisert AD1C/Ø, [EMAIL PROTECTED], http://www.ad1c.us
___
Dx4win mailing list
Dx4win@mailman.qth.net
http://mailman.qth.net/mailman/listinfo/dx4win

Re: [Dx4win] Problem with DXCC Submission report

[Jim Reisert AD1C]

It's a shortcoming in DX4WIN.  For a QSO to be considered Checked, the Award 
flag must be set to Checked, but *ALSO* the QSO must be marked Confirmed.  When 
you set your Preference to Upl Conf, then all the QSOs that were marked 
Checked, but confirmed by paper QSL, are no longer considered checked, since 
they are no longer confirmed (unless both confirmed by QSL *and* LoTW).

Does that make sense?  I have asked Paul to change this, but no feedback as of 
yet.

73 - Jim AD1C

 --
Jim Reisert AD1C/Ø, [EMAIL PROTECTED], http://www.ad1c.us



- Original Message 
From: Jerry.Van [EMAIL PROTECTED]
To: dx4win@mailman.qth.net
Sent: Saturday, August 2, 2008 1:54:05 PM
Subject: [Dx4win] Problem with DXCC Submission report

I'm trying to generate a Submission report based on LoTW confirmations 
only.  In the past I believe I have been able to set my PreferencesQSO 
and set the Confirmed QSO's parameter to Upload Conf.  And after saving 
the Preferences I could generate a DXCC Submission report which would 
list only those QSO's that could be submitted and confirmed via LoTW. 
Doing that under 7.04.04 now generates a listing that is several times 
in excess of those that are newly eligible for LoTW confirmation.  In 
many cases DX4WIN is picking QSO's for entities that have already been 
Checked.  And BTW, the listing if I set Card in Hand is also incorrect. 
But setting to Card or Upload seems to be correct.

Is this a problem with 7.04.04 or is my memory faulty on what I think I 
was able to do prior to 7.04?

Jerry  N8BM
___
Dx4win mailing list
Dx4win@mailman.qth.net
http://mailman.qth.net/mailman/listinfo/dx4win

Re: [Dx4win] Problem with 7.04 Import

[Lee Hallin]

Hi Bob,
 
  As a guess, I'd say your DX4WIN.IEP (Import/ExPort) file got corrupted.  I 
don't know if the format of it is compatible with 7.02 or not.
 
If you have no other suggestions:
  1) Exit DX4WIN
  2) Make a copy of your DX4WIN.IEP file (located in the SAVE directory) to 
another name.
  3) Copy the DX4WIN.IEP file from your DX4WIN 7.02 /SAVE directory to your 
DX4WIN 7.04 /SAVE directory
  4) Try 7.04 DX4WIN again.
  5) If this doesn't fix it or makes things worse
 a) Exit DX4WIN
 b) Copy the file created in step #2 above back to the 7.04 SAVE directory.
 
Please let me or us know whether this works or not.
 
Lee  N7NU
 
___
Dx4win mailing list
Dx4win@mailman.qth.net
http://mailman.qth.net/mailman/listinfo/dx4win

Re: [Dx4win] Problem importing from LoTW

[Kostas SV1DPI]

Probably you have already imported and cfmd these qsos
Can you check manually if the qsos are lotw cfmd in your log?

if you downloaded qsos, for example, at 20 of May and some confirmations 
were confirmed the first hours of the 20th of May, LotW would give them agn.


Kostas SV1DPI

- Original Message - 
From: W5LT [EMAIL PROTECTED]

To: dx4win@mailman.qth.net
Sent: Monday, June 02, 2008 12:57 AM
Subject: [Dx4win] Problem importing from LoTW



Hi All:
Have downloaded latest *.adi report from LoTW. Imported confirmations into
the log.
Although there are 13 QSLs in the report (including several J5C), Dx4WIN
reported only (1) confirmation.
When I checked the log, found there were actually two confirmations 
imported

(strange), but the other 11 were ignored. Tried several times to redo the
import, but it now says No QSLs imported each time.
Any suggestions? Do I now need to change the QSOs manually?
I am using 7.02.15, and it has been doing this flawlessly for several 
years.

Thanks for any help.
Bob, W5LT



___
Dx4win mailing list
Dx4win@mailman.qth.net
http://mailman.qth.net/mailman/listinfo/dx4win





___
Dx4win mailing list
Dx4win@mailman.qth.net
http://mailman.qth.net/mailman/listinfo/dx4win