Hello Gregory,
Did these sent details help you to discover my problem of i2c testing?
I appreciate your help.
Best regards,
Vladimir
-Original Message-
From: Vladimir Levintovich
Sent: Thursday, May 21, 2015 9:26 AM
To: 'Rose, Gregory V'; e1000-devel@lists.sourceforge.net
S
Hi guys,
Did someone succeed to turn P0_LED, P1_LED leds by writing values to registers
on XL710?
I made an all according to the data sheet, but I don't succeed, that any LED is
turned ON or blinking.
My card with XL710 consists of 2 ports (interface p6p1, p6p2).
I use command "ethtool -p p6p1"
Gregory V [mailto:gregory.v.r...@intel.com]
Sent: Thursday, May 21, 2015 3:30 AM
To: Rose, Gregory V; Vladimir Levintovich; e1000-devel@lists.sourceforge.net
Subject: RE: Programming i2c interface on XL710
Could you please send the output of 'ethtool -i' for each of the interfaces?
Also
0x000881e0 = 0xa5a01234
I have disconnected qsfp Trancievers and I saw at the same result. It means I
wrote nothing to the QSFP Tranciever.
Please advise how can I advance?
Thank you
-Original Message-
From: Rose, Gregory V [mailto:gregory.v.r...@intel.com]
Sent:
Hi guys,
Is someone have an experience with programming i2c interface on XL710?
I need to test QSFP+ 10 Gbs 4X Pluggable Transceiver (FTL410QD2C) , i.e. to
write something data, read that and also to test Acknowledge.
Device code of this transceiver is 101 R/W.
According to XL710 data sheet
