6:30 AM
To: Len White
Cc: e1000-devel@lists.sourceforge.net
Subject: Re: [E1000-devel] C2758 i354 link issue
While that's useful, we would also like reproduction steps. We'll need exact
hardware and software setups and the steps you took to get there. Send the full
dmesg, "
in...@intel.com
(503) 712-4565
-Original Message-
From: Fujinaka, Todd [mailto:todd.fujin...@intel.com]
Sent: Monday, January 11, 2016 6:30 AM
To: Len White
Cc: e1000-devel@lists.sourceforge.net
Subject: Re: [E1000-devel] C2758 i354 link issue
While that's useful, we would also lik
[mailto:todd.fujin...@intel.com]
Sent: Monday, January 11, 2016 6:30 AM
To: Len White
Cc: e1000-devel@lists.sourceforge.net
Subject: Re: [E1000-devel] C2758 i354 link issue
While that's useful, we would also like reproduction steps. We'll need exact
hardware and software setups and the step
While that's useful, we would also like reproduction steps. We'll need exact
hardware and software setups and the steps you took to get there. Send the full
dmesg, "lspci -vvv", eeprom dump, and registers dumps of both the failed and
passing cases.
It would be easiest if you send those as separ
So I've compiled the driver with debug mode turned on, and I have two boot
logs and a log of workaround to share with you, the first one is it booting
normally and the link comes up normally without any workarounds, the second
is when it fails.
Good boot: http://repo.ezzi.net/igb1.txt
Fail bo
Yes. I first encountered the issue on Debian, on an i210 a couple years ago
and worked around it with ethtool in rc.local forcing 1000/full duplex. And
I ran into the issue again on a i354 with OpenWRT, completely vanilla
kernel, and also installed the latest igb driver. Two completely different
Kristian didn't reply to the mailing list but if you check e1000-bugs you'll
see he resolved his issues. I'm still not clear on what the problem was, but
you can check there for more details.
In any case, I'm guessing your problem isn't the same as his problem. I think I
asked him to try a diff
